GBJ25H NELLSEMI | Alldatasheet
Document overview
- Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
- PDF pages: 3
Technical content
FEATURES
UL recognition file number E320098 Small volume, light weight Typical IR less than 2.0 µA TYPICAL APPLICATIONS General purpose use in AC/DC bridge full wave Epoxy meets UL 94 V-O flammability rating PRIMARY CHARACTERRISTICS IF(AV) Weight: 6.7g (0.24 ozs) 25A VRRM 400V to 1200V 1.10V 5 µA 150ºC IFSM IR VF SEMICONDUCTOR RoHS RoHS Page 1 of 3 Glass Passivated Single-Phase Bridge Rectifier, 25A Nell High Power Products Compliant to RoHS High surge current capability Low thermal resistance Small thermal resistance rectification for big power supply, field supply for DC motor, industrial automation applications. ADVANTAGE TJ max. 350A GBJ2504H Thru GBJ2512H Isolation voltage up to 2500V International standard package High heat-conduction rate Low temperature rise All dimensions in millimeters www.nellsemi.com + ~ ~ High temperature soldering guaranteed : GBJ25H Series 260°C/10 second, 2.3kg tension force Front Rear 30±0.3 Ø3.2±0.2 20±0.317.5±0.2 4±0.2 1.0±0.1 2.0±0.2 + ~ ~ Ø6.0±0.2 3.6±0.1 8.8±0.2 0.85±0.05 4.6±0.1 1.0±0.1 0.65±0.05 Aluminum base plate Ø4.0 29±0.2 30±0.3 19±0.2 20±0.3 Aluminum base plate
MAJOR RATINGS AND CHARACTERISTICS (T = 25°C unless otherwise noted)A PARAMETER V V SYMBOL GBJ25..H UNIT 1300 500 700 900 1200400 600 800 1000 120806 10 1100 1200400 600 800 1000 V Maximum repetitive peak reverse voltage Peak reverse non-repetitive voltage Maximum DC blocking voltage Maximum average forward rectified output current, T = 85°C c Peak forward surge current single sine-wave superimposed on rated load Rating (non-repetitive, for t greater than 1 ms and less than 8.3 ms) for fusing RMS isolation voltage from case to leads Operating junction storage temperature range VRRM VRSM IFSM VDC IF(AV) VISO 2I t 2500 508 -40 to 150 350 2A s A A V ºC ELECTRICAL CHARACTERISTICS (T = 25°C unless otherwise noted)A PARAMETER V µA SYMBOL GBJ25..H UNIT 04 120806 10 Maximum instantaneous forward drop per diode Maximum reverse DC current at rated DC blocking VF IR 500 1.10 voltage per diod TEST CONDITIONS I = 12.5AF T = 25°CA T = 150°CA THERMAL AND MECHANICAL (T = 25°C unless otherwise noted)A PARAMETER °C/W SYMBOL GBJ25..H UNIT 04 120806 10 Typical thermal resistance (1) With heatsink, single side heat dissipation, half sine wave. (1)RθJC 0.85 Notes Storage temperature range TSTG -40 to 150 ºC TJ TEST CONDITIONS junction to case Single-side heat dissipation, sine half wave Mounting ± 10 % to heatsink M3 A mounting compound is recommended and the torque should be rechecked after a for the spread period of 3 hours to allow of the compound. 0.8 .N m Approximate weight 6.7 torque g - Product type : “GBJ” Package,1Ø Bridge Device code - Voltage code : code x 100 = VRRM I rating : "25" for 25AF(AV) Ordering Information Tabel GBJ25H Series GBJ H25 10 421 3 - H: With Aluminum base plate (heatsink) Page 2 of 3www.nellsemi.com
Fig.1 Derating curve for output rectified current Average forward output current, amperes (A) Ambient temperature (°C) 0 40 100 140 Fig.2 Maximum non-repetitive peak forward surge current per bridge element Average output current, amperes (A) 100 200 300 400 1 10 100 Number of cycles at 50H z T = 25°C J T = 100°C J Fig.3 Typical reverse characteristics per bridge element Instantaneous reverse output micro, amperes (μA) Percent of rated peak reverse voltage (%) 100 1.0 0.1 0.01 0 20 40 60 80 100 120 140 Fig.4 Typical forward characteristics per bridge element 100 1.0 0.1 Instantaneous forward current, amperes (A) Forward voltage (v) T = 25°CJ T = 25°CJ 20 60 80 120 160 GBJ25H Series Page 3 of 3www.nellsemi.com