GBJ10005_V01 CHENDA | Alldatasheet
Document overview
- Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
- PDF pages: 2
Technical content
DN:T19812A0 https://www.microdiode.com Rev:2019A0 Page :1 Reverse Voltage - 50 to 1000 Volts Forward Current - 10.0 Amperes GBJ10005 THRU GBJ1010 F eatures Maximum Ratings And Electrical Characteristics Ratings at 25°C ambient temperature unless otherwisespecified. Single phase half-wave 60Hz,resistive or inductive load, for capacitive load current derate by 20%. Mechanical Data Ideal for printed circuit board Reliable low cost construction utilizing molded plastic technique Plastic material has U/L lammability classification 94V-0 Low forward voltage drop,high current capability Case : JEDEC GBJ Molded plastic body Terminals : Solder plated, solderable per MIL-STD-750,Method 2026 Polarity : Polarity symbol marking on body Mounting Position : Any Dimensions in inches and (millimeters) Paramet er SY MBOLS GBJ 10005 GBJ 1001 GBJ 1002 GBJ 1004 GBJ 1006 GBJ 1008 GBJ 1010 UN ITS Marking Code MDD GBJ 10005 MDD GBJ 1001 MDD GBJ 1002 MD D GBJ 1004 MDD GBJ 1006 MDD GBJ 1008 MDD GBJ 1010 M aximum repetitive peak reverse voltage VRRM 50 100 200 400 600 800 1000 V Maximum RMS voltage VRM S 35 70 140 280 420 560 700 V Maxi mum DC blocking voltage VDC 50 100 200 400 600 800 1000 V Maximum average forward(with heatsink NOTE 2) Rectified current @T c =100°C(without heatsink) I(A 10.0 3.5 A Peak forward surge current 3ms single half sine-wave superimposed on rated load (JEDEC Method) IFSM 220.0 A R ating for Fusing(t<8.3ms) I t 200.86 A s Maximum forward voltage at 5.0A VF 1.0 V Maximum DC reverse current TA=25°C at rated DC blocking voltage TA=125°C IR 10 μA 500 μA T ypical Junction Capacitance (Note 1) CJ 55 p F Typical Thermal Resistance (Note 2) RθJA 1.8 °C/W Oper ating junction temperature range TJ - 5 5t o+ 1 5 0 °C storag e temperature range TST G - 5 5t o+ 1 5 0 °C NO TES: 1.Measured at 1.0MHz and applied reverse voltage of 4.0V DC. 2.Device mounted on 75mm*75mm*1.6mm Cu plate heatsink. 3.The typical data above is for reference only. .122(3.1) ? .134(3.4) 425(10.8) .441( 11.2) .031( 0.8) .023(0.6) .098(2.5) .114(2.9) ? .134(3.4) ? .122(3.1) .189( 4.8) .173(4.4) 134(3.4) .150(3.8) 708(18.0) .669(17.0) .800(20.3) .776(19.7) (5.1) .198 86(9.8) .287(7.3).287(7.3) .303(7.7) SPACING .043(1.1) .035(0.9) .078(2.0) .094(2.4) .106(2.7) .096(2.3) 1.169(29.7) 1.193(30.3) + ~ ~ _ 165(4.2) .142(3 .6) .118( 3.0)*45° MAX GBJ
Rev:2019A0 Page :2 Ratings And Characteristic Curves The curve above is for reference only. https://www.microdiode.com Reverse Voltage - 50 to 1000 Volts Forward Current - 10.0 Amperes GBJ10005 THRU GBJ1010 1000 100 1.0 0.1 02 0 40 60 80 100 PERCENT OF RATED PEAK REVERSE VOLTAGE,(%) INSTANTANEOUS REVERSE CURRENT ,(uA) FIG.5-TYPICAL REVERSE CHARACTERISTICS TJ=125°C TJ=100°C TJ=50°C TJ=25°C FIG.3-TYPICAL JUNCTION CAPACITANCE REVERSE VOLTAGE,(VOLTS) CAPACITANCE,(pF) 10.0 1001.0 1.0 100 TJ=25°C,f=1MHZ AVERAGE FORWARD OUTPUT CURRENT AMPERES CASE TEMPERATURE, ℃ FIG.1-FORWARD CURRENT DERATING CURVE 20 1000 140 10.0 8.0 6.0 4.0 1.0 2.0 12080 60 40 WITHOUT HEATSINK WITH HEATSINK SINGLE PHASE HALF WAVE 60Hz RESISTIVE OR INDUCTIVE LOAD NUMBER OF CYCLES AT 60Hz PEAK FORWARD SURGE CURRENT , AMPERES FIG.2-MAXMUN NON-REPETITIVE SURGE CURRENT 150 300 100 250 200 1 2 5 10 20 50 100 (JEDEC METHOD) TJ=25°C SINGLE -SINE- WAVE INSTANTANEOUS FORWARD VOLTAGE,VOLTS FIG.4-TYPICAL FORWARD CHARACTERISTICS INSTANTANEOUS FORWARD CURRENT, (A) 100 0.1 1.0 TJ = 25°C PULSE WIDTH 300us