GBIC-1250A3FR DELTA | Alldatasheet

Document overview

  • Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
  • PDF pages: 11

Technical content

Features

z Compliant with Gigabit Interface Converter (GBIC) Revision 5.4 z Compliant with proposed specifications for IEEE 802.3z/Gigabit Ethernet z GBIC-1250AxFx compliant with the 1.0625GBd FC-PI 100-M5-SN-I and 100-M6-SN-I Rev.13 z GBIC-1250BxQx compliant with the 1.0625GBd FC-PI 100-SM-LC-L Rev.13 z Dual 5/3.3V Power Supply for GBIC-1250x5xx and Single 5V Power Supply for GBIC-1250x3xx z TTL Logic TX_DISABLE / TX_FAULT / RX_LOS functions z Class 1 Laser Product Compliant with the Requirements of IEC 60825-1 and IEC 60825-2 z Hot-Pluggable

Description

The GBIC-1250xxxx families are compliant with GBIC interface converters sp ecification Rev. 5.4. as well as Gigabit Ethernet standard as specified in IEEE 802.3. Delta’s GBIC transceiver family uses a 20-pin connector to allow hot plug capability. The system designer can make configuration changes or maintenance simply by plugging in different type of converters without removing the power supply from the host system.

Applications

z 1.25 Gigabit Ethernet z Fiber Channel Performance GBIC-1250AxFx: z 850nm VCSEL, up to 500m in 50/125DŽm MMF z 850nm VCSEL, up to 220m in 62.5/125DŽm MMF GBIC-1250BxQx: z 1310nm FP laser, up to 10km in 9/125DŽm SMF z 1310nm FP laser, up to 550m in 50/125DŽm MMF z 1310nm FP laser, up to 550m in 62.5/125DŽm MMF

DELTA ELECTRONICS, INC. 2 2006/09 Rev. 0E www.deltaww.com Absolute Maximum Ratings Parameter Symbol Min. Typ. Max. Unit Notes Storage Temperature Ts -40 85 ºC Supply Voltage V CC 0 6 V Recommended Operating Conditions Parameter Symbol Min. Typ. Max. Unit Notes Ambient Operating Temperature T A 0 70 Ċ Supply voltage GBIC-1250x3xx GBIC-1250x5xx Vcc 4.75 3.15/4.75 3.3/5 5.25 3.47/5.25 V Total Supply Current I S 300 mA Data Input/Output Load R DL 75 Ƹ

Electrical Characteristics

(TA=0 ºC to 70 ºC, VCC=3.15/4.75V to 3.47/5.25V) Parameter Symbol Min. Typ. Max. Unit Note Transmitter Transmitter Differential Input Voltage V DT 0.5 2.4 V 1 Transmitter Disable Input-High V DISH 2 V CC+0.3 V Transmitter Disable Input-Low V DISL 0 0.8 V Transmitter Fault Output-High V TXFH 2 V CC+0.3 V 2 Transmitter Fault Output-Low V TXFL 0 0.8 V 2 Receiver Receiver Differential Output Voltage V DR 0.35 0.7 2 V 3 LOS Output Voltage-High V LOSH 2 V CC+0.3 V 2 LOS Output Voltage-Low V LOSL 0 0.8 V 2 Output Data Rise/Fall Time t r / tf 400 psec 4 Total Jitter (pk-pk) TJ RX 220 psec Notes: 1. Internally AC coupled and terminated to 150-Ohm differential load. 2. Pull up to V CC with a 4.7K – 10K Ohm resistor on host Board. 3. Internally AC coupled, but requires a 150-Ohm diffe rential termination at or internal to Serializer/ Deserializer. 4. These are 20%~80% values.

DELTA ELECTRONICS, INC. 3 2006/09 Rev. 0E www.deltaww.com Optical Characteristics (GBIC-1250AxFx) Parameter Symbol Min. Typ. Max. Unit Note Transmitter Output Optical Power (Avg.) P O -9.5 -4 dBm Optical Extinction Ratio ER 9 dB Center Wavelength ǃC 830 850 860 nm Spectral Width (RMS) NJ 0.85 nm Optical Rise/Fall Time tr /tf 260 psec 1 Total Jitter (pk-pk) TJTX 220 psec Relative Intensity Noise RIN -117 dB/Hz Output Eye Complies with the IEEE 802.3z/D2 specification, and is class 1 laser eye safety Receiver Sensitivity (Avg.) P IN -17 dBm 2 Input Optical Wavelength ǃ 850 nm LOS- De-Asserted (Avg.) P D -17 dBm LOS- asserted (Avg.) P A -30 dBm LOS-Hysteresis P D-PA 0.5 dB Overload P O -4 dBm Notes: 1. These are 20%~80% values 2. The sensitivity is provided at a BER of 1×10 -10 or better with an input signal consisting of 1250Mb/s, 27-1 PRBS. Mask of the eye diagram for the optical transmit signal

DELTA ELECTRONICS, INC. 4 2006/09 Rev. 0E www.deltaww.com Optical Characteristics (GBIC-1250BxQx) Parameter Symbol Min. Typ. Max. Unit Note Transmitter Output Optical Power (Avg.) P O -9.5 -3 dBm Optical Extinction Ratio ER 9 dB Center Wavelength ǃC 1270 1310 1355 nm Spectral Width (RMS) NJ 2.8 nm Optical Rise/ Fall Time tr/tf 260 psec 1 Total Jitter (pk-pk) TJTX 220 psec Relative Intensity Noise RIN -120 dB/Hz Output Eye Complies with the IEEE 802.3z/D2 specification, and is class 1 laser eye safety Receiver Sensitivity (Avg.) P IN -19 dBm 1 Input Optical Wavelength ǃ 1310 nm LOS- De-Asserted (Avg.) P D -19 dBm 2 LOS- asserted (Avg.) P A -30 dBm 2 LOS-Hysteresis P D-PA 0.5 dB Overload P O -3 dBm Notes: 1. These are unfiltered 20%~80% values 2. The sensitivity is provided at a BER of 1×10 -12 or better with an input signal consisting of 1.25Gb/s, 27-1 PRBS and ER=9dB. Mask of the eye diagram for the optical transmit signal

DELTA ELECTRONICS, INC. 5 2006/09 Rev. 0E www.deltaww.com Pin Out Table Pin Name Pin# Sequence Sequence Pin# Pin Name RX_LOS 1 2 1 11 RGND RGND 2 2 1 12 -RX_DAT RGND 3 2 1 13 +RX_DAT MOD_DEF(0) 4 2 1 14 RGND MOD_DEF(1) 5 2 2 15 VDDR MOD_DEF(2) 6 2 2 16 VDDT TX_DISABLE 7 2 1 17 TGND TGND 8 2 1 18 +TX_DAT TGND 9 2 1 19 -TX_DAT TX_FAULT 10 2 1 20 TGND Overview of internal interface signal Definition Pin Name Pin # Name/Function Signal Specification Receiver Signals RGND 2,3,11,14 Receiver Ground (may be connec ted with TGND in GBIC) Ground, to GBIC VDDR 15 Receiver +5 volt (may be connected with VDDT in GBIC) Power, to GBIC -RX_DAT 12 Receive Data, Differential PECL High speed serial, from GBIC +RX_DAT 13 Receive Data, Differential PECL High speed serial, from GBIC RX_LOS 1 Receiver Loss of Signal, logic high, open collector compat-ible,4.7 K to 10 K Ohm pullup to VDDT on host Low speed, from GBIC Transmitter Signals TGND 8,9,17,20 Transmitter Ground (may be connect ed with RGND internally) Ground, to GBIC VDDT 16 Transmitter +5 volt (may be connected with VDDR in GBIC) Power, to GBIC +TX_DAT 18 Transmit Data, Differential PECL High speed serial, to GBIC -TX_DAT 19 Transmit Data, Differential PECL High speed serial, to GBIC TX_DISABLE 7 Transmitter Disable, logic high, open collector compatible,4.7 K to 10 K Ohm pullup to VDDT on GBIC Low speed, to GBIC TX_FAULT 10 Transmitter Fault, logic high, open collector compatible,4.7 K to 10 K Ohm pullup to VDDT on host Low speed, from GBIC Control Signals MOD_DEF(0) 4 GBIC module definition and presence, bit 0,4.7 K to 10 K Ohm pullup to VDDT on host Low speed, from GBIC MOD_DEF(1) 5 GBIC module definition and presence, bit 1,4.7 K to 10 K Ohm pullup to VDDT on host Low speed, from GBIC MOD_DEF(2) 6 GBIC module definition and presence, bit 2,4.7 K to 10 K Ohm pullup to VDDT on host Low speed, from GBIC

DELTA ELECTRONICS, INC. 6 2006/09 Rev. 0E www.deltaww.com Recommend Circuit Schematic

DELTA ELECTRONICS, INC. 7 2006/09 Rev. 0E www.deltaww.com GBIC module definition parameters Module Definition MOD_DEF(0) Pin 4 MOD_DEF(1) Pin 5 MOD_DEF(2) Pin 6 Interpretation by host Reference

0 NC NC NC GBIC not present clause

1 NC NC TTL LOW

Copper Style 1 or Style 2 connector, 1.0625 Gbd, 100-TW-EL-S or 100-TP-EL-S, active inter-enclosure connection and IEEE802.3 1000BASE-CX

2 NC TTL LOW NC

Copper Style 1 or Style 2 connector, 1.0625 Gbd, 100-TW-EL-S, or 100-TP-EL-S, active or passive intra-enclosure connection 3 NC TTL LOW TTL LOW Optical LW, 1.0625 Gbd 100-SM-LC-L

4 TTL LOW SCL SDA Serial module definition protocol

5 TTL LOW NC TTL LOW Optical SW, 1.0625 Gbd 100-M5-SN-I or 100-M6-SN-I

6 TTL LOW TTL LOW NC

Optical LW, 1.0625 Gbd 100-SM-LC-L and similar to 1.25 Gbd IEEE802.3z 1000BASE-LX, single mode

7 TTL LOW TTL LOW TTL LOW

Optical SW, 1.0625 Gbd 100-M5-SN-I or 100-M6-SN-I and 1.25 Gbd, IEEE 802.3z, 1000BASE-SX GBIC timing parameters for GBIC management Parameter Symbol Min. Max. Unit Unit Conditions TX_DISABLE assert time t_off 10 µsec Rising edge of TX_DISABLE to fall of output signal below 10% of nominal TX_DISABLE negate time t_on 1 mec Falling edge of TX_DISABLE to rise of output signal above 90% of nominal Time to initialize, includes reset of TX_FAULT t_init 300 msec From power on or hot plug fter V DD T > 4.75 volts or From negation of TX_DISABLE during reset of TX_FAULT. TX_FAULT from fault to assertion t_fault 100 µsec From occurrence of fault (out-put safety violation or V DD T < 4.5 volts) TX_DISABLE time to start reset t_rest 10 µsec TX_DISABLE HIGH before TX_DISABLE set LOW RX_LOS assert delay t_loss_on 100 µsec From detection of loss of signal to assertion of RX_LOS RX_LOS negate delay t_loss_off 100 µsec From detection of presence of signal to negation of RX_LOS

DELTA ELECTRONICS, INC. 8 2006/09 Rev. 0E www.deltaww.com GBIC timing parameters

DELTA ELECTRONICS, INC. 9 2006/09 Rev. 0E www.deltaww.com GBIC-1250AxFx EEPROM Serial ID Memory Contents (2-Wire Address A0h) "EESFTT Hex ASCII "EESFTT Hex ASCII "EESFTT Hex ASCII "EESFTT Hex ASCII "EESFTT Hex ASCII "EESFTT Hex ASCII 00 01 25 20 50 33/35 3/5 75 SN 100 00 125 00 01 04 26 20 51 46 F 76 SN 101 00 126 00 02 01 27 20 52 53/52 S/R 77 SN 102 00 127 00 03 00 28 20 53 20 78 SN 103 00 04 00 29 20 54 20 79 SN 104 00 05 00 30 20 55 20 80 SN 105 00 06 01 31 20 56 56 81 SN 106 00 07 20 32 20 57 31 82 SN 107 00 08 40 33 20 58 31 83 SN 108 00 09 0C 34 20 59 31 84 DC Note 3 109 00 10 01 35 20 60 00 85 DC 110 00 11 01 36 00 61 00 86 DC 111 00 12 0D 37 00 62 00 87 DC 112 00 13 00 38 00 63 CS1 Note 1 88 DC 113 00 14 00 39 00 64 00 89 DC 114 00 15 00 40 47 G 65 1A 90 DC 115 00 16 32 41 42 B 66 00 91 DC 116 00 17 16 42 49 I 67 00 92 00 117 00 18 00 43 43 C 68 SN Note 2 93 00 118 00 19 00 44 2D - 69 SN 94 00 119 00 20 44 D 45 31 1 70 SN 95 CS2 Note 4 120 00 21 45 E 46 32 2 71 SN 96 00 121 00 22 4C L 47 35 5 72 SN 97 00 122 00 23 54 T 48 30 0 73 SN 98 00 123 00 24 41 A 49 41 A 74 SN 99 00 124 00 GBIC-1250BxQx EEPROM Serial ID Memory Contents (2-Wire Address A0h) "EESFTT Hex ASCII "EESFTT Hex ASCII "EESFTT Hex ASCII "EESFTT Hex ASCII "EESFTT Hex ASCII "EESFTT Hex ASCII 00 01 25 20 50 33/35 3/5 75 SN 100 00 125 00 01 04 26 20 51 51 Q 76 SN 101 00 126 00 02 01 27 20 52 53/52 S/R 77 SN 102 00 127 00 03 00 28 20 53 20 78 SN 103 00 04 00 29 20 54 20 79 SN 104 00 05 00 30 20 55 20 80 SN 105 00 06 02 31 20 56 56 81 SN 106 00 07 12 32 20 57 31 82 SN 107 00 08 00 33 20 58 31 83 SN 108 00 09 01 34 20 59 31 84 DC Note 3 109 00 10 01 35 20 60 00 85 DC 110 00 11 01 36 00 61 00 86 DC 111 00 12 0D 37 00 62 00 87 DC 112 00 13 00 38 00 63 CS1 Note 1 88 DC 113 00 14 00 39 00 64 00 89 DC 114 00 15 64 40 47 G 65 1A 90 DC 115 00 16 37 41 42 B 66 05 91 DC 116 00 17 37 42 49 I 67 05 92 00 117 00 18 00 43 43 C 68 SN Note 2 93 00 118 00 19 00 44 2D - 69 SN 94 00 119 00 20 44 D 45 31 1 70 SN 95 CS2 Note 4 120 00 21 45 E 46 32 2 71 SN 96 00 121 00 22 4C L 47 35 5 72 SN 97 00 122 00 23 54 T 48 30 0 73 SN 98 00 123 00 24 41 A 49 42 B 74 SN 99 00 124 00 Notes: 1) Byte 63(CS1): Check sum of bytes 0-62. 2) Byte 68-83 (SN): Serial number. 3) Byte 84-91 (DC): Date code. 4) Byte 95 (CS2): Check sum of bytes 64-94. 5) Byte 128-255 had been set hex. 00.

DELTA ELECTRONICS, INC. 10 2006/09 Rev. 0E www.deltaww.com Package Outline Drawing GBIC-1250AxFx 1040.10 and 1040.11 Com plies w ith 21 CFR FS Class I Laser Product M ulti M ode 850 nm GBIC-1250BxQx Com plies w ith 21 CFR 1040.10 and 1040.11 Class I Laser Product Single M ode 1310 nm

DELTA ELECTRONICS, INC. 11 2006/09 Rev. 0E www.deltaww.com Regulatory Compliance Test Item Reference Qty’ Evaluation (#1) Electromagnetic Interference EMC FCC Class B EN 55022 Class B CISPR 22 (#2) Immunityj Radio Frequency Electromagnetic Field EN 61000-4-3 IEC 1000-4-3 5 (#3) Immunityj Electrostatic Discharge to the Duplex SC Receptacle EN 61000-4-2 IEC 1000-4-2 IEC 801.2 (#4) Electrostatic Discharge to the Electrical Pins MIL-STD-883C Method 3015.4 EIAJ#1988.3.2B Version 2, Machine model (1) Satisfied with electrical characteristics of product spec. (2) No physical damage Ordering information for GBIC modules GBIC-1250X1X2X3X4 X1: Light source types A: Multi-mode B: 1310nm Single-mode X3: Distance F: 500m, 50/125DŽm MMF Q: 10km, 9/125DŽm SMF X2: Power Supply Voltage 3: 5V 5: 3.3 and 5V X4: R: RoHS Compliant Available Products z GBIC-1250B5Lx: Dual supply voltage (3.3/5V), 1310nm DFB-LD, SMF 40km. z GBIC-1250D5Mx: Dual supply voltage (3.3/5V), 1550nm DFB-LD, SMF 40km. z GBIC-1250D5Wx: Dual supply voltage (3.3/5V), 1550nm DFB-LD, SMF 70km. z GBIC-1250D5Rx: Dual supply voltage (3.3/5V), 1550nm DFB-LD, SMF 80km. z GBIC-1250D5Vx: Dual supply voltage (3.3/5V), 1550nm DFB-LD, SMF 100km.