GB160160A JHE | Alldatasheet
Document overview
- Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
- PDF pages: 25
Technical content
GB160160A VER: 3.0 - 0 - Issue date: 2006/08/03 JEWEL HILL ELECTRONIC CO.,LTD. Module No. GB160160A JEWEL HILL ELECTRONIC CO.,LTD. SPECIFICATIONS FOR LCD MODULE Office Address: Rm. 518,5/F., 101 Shangbu Industrial District, HuaqiangNorthRoad, Shenzhen, China TEL : (86)-755-83362489 83617492 FAX: (86)-755-83286396 83365871 E-mail: sales@jhlcd.com jhlcd@21cn.com Website: www.jhlcd.com
GB160160A VER: 3.0 - 1 - Issue date: 2006/08/03 JEWEL HILL ELECTRONIC CO.,LTD. TABLE OF CONTENTS
GB160160A VER: 3.0 - 2 - Issue date: 2006/08/03 JEWEL HILL ELECTRONIC CO.,LTD. LCM Number System ''45/ 905)&3 *$5:1& $0#4.5-$. %53"/4.*44*7& '53"/4.*44*7& "".#&3 ##-6& ::&--08(3&&/ 33&% 88)*5& 05)&3$0-03 6611&3 %%08/ --&'5 33*()5 8*5)$0/530--&3 8*5)065$0/530--&3 $4.5*$ 8*5)$0/530--&3 %4.5*$ 8*5)065$0/530--&3 005)&35:1& 005)&3 ((3": ::&--08(3&&/ ##-6& -$%$0-03.0%& /5/ ))5/ 445/ -$%5:1& (#"4:$:/%"7
GB160160A VER: 3.0 - 3 - Issue date: 2006/08/03 JEWEL HILL ELECTRONIC CO.,LTD. 1. GENERAL DESCRIPTION The GB160160A is a 160 x 160 Dots Graphics LCD module. It has a STN panel composed of 160segments and 160 commons. The LCM can be easily accessed by micro-controller via parallel interface. 2. FEATURES Transflective and Positive Display Mode STN(Y-G) module Display Format Graphic 160 x 160 dots Input Data Parallel data input from MPU Multiplexing Ratio 1/160 Duty Bias 1/12 Bias Viewing Direction 6 O’clock Backlight LED (Yellow-Green) 3. MECHANICAL SPECIFICATION Item Specifications Unit Dimensional outline 88.8 x 88.8 x 14.5(max) mm Resolution 160segs x 160coms dots Active area 60.775(W) x 60.775(H) mm Dots pitch 0.38(W)×0.38(H) mm Dots size 0.355(W)×0.355 (H) mm
GB160160A VER: 3.0 - 4 - Issue date: 2006/08/03 JEWEL HILL ELECTRONIC CO.,LTD. 4. MECHANICAL DIMENSION
GB160160A VER: 3.0 - 5 - Issue date: 2006/08/03 JEWEL HILL ELECTRONIC CO.,LTD. 5. MAXIMUM RATINGS Item Symbol Min Max Unit Note VDD - Vss -0.3 5.5 V Supply voltage VLCD -0.3 24.0 V Input Voltage V IN -0.3 V DD+0.3 V Operating temperature T OPR 0 +50 Ċ Storage temperature T STR -10 +60 Ċ Humidity --- --- 90 %RH 6. ELECTRICAL CHARACTERISTICS Item Symbol Condition Min. Typ. Max. Unit Supply Voltage Logic V DD --- --- 5.0 --- V H level V IH 0.8V DD --- V DD Input Voltage L level V IL --- VSS --- 0.2V DD V Current Consumption (LCD DRIVER) IDD VDD=5.0V; VLCD=22.2V, Tamb=25Ċ; --- --- 1.5 mA LCD Driving Voltage V LCD Bias=1/12 VLCD=VDD-V5 17.0 17.5 18.0 V Current Consumption (With LED BackLight) ILED VDD=5.0V; VLED=4.2V,Tamb=25Ċ; --- --- TBD mA
GB160160A VER: 3.0 - 6 - Issue date: 2006/08/03 JEWEL HILL ELECTRONIC CO.,LTD. 7. MODULE FUNCTION DESCRIPTION 7.1. PIN DESCRIPTION INTERFACE WITH CN1 & CN2: Pin No. Symbol Description
1 VSS Power supply for Ground (0V)
2 M AC Signal for LCD Driver Output
3 FLM Data Input for Common ICs
4 CL1 Data Latch Colok
5 CL2 Data Shift Colok
Display Data Input Terminal for Segment ICs
10 VEE Power Supply for Negative V oltage
11 VDD Power supply for positive (+5V)
12 V0 VLCD V oltage Regulation Terminal
13 /DISPOFF Display OFF Control
14 K Power Supply for LED BackLight Negative
15 A Power Supply for LED BackLight Positive
GB160160A VER: 3.0 - 7 - Issue date: 2006/08/03 JEWEL HILL ELECTRONIC CO.,LTD. INTERFACE WITH CN3: Pin No. Symbol Description
1 VSS Power Supply For Ground(0V)
2 VDD Power Supply For Positive(+5V)
3 VO VLCD V oltage Regulation Terminal
4 /RD Read Signal Input Terminal 5 /RW Write Signal Input Terminal 6 /CE Chip Selection Terminal
7 C/D Command/Data Selection Terminal
8 DB0
9 DB1
10 DB2
11 DB3
12 DB4
13 DB5
14 DB6
15 DB7
8-bit bi-directional Data Bus 16 /RES Reset Selection Terminal
17 VOUT Negative V oltage Input/Output Terminal
18 LEDA Power Supply for Backlight Positive
19 LEDK Power Supply for Backlight Negative
20 NC No Connect
GB160160A VER: 3.0 - 8 - Issue date: 2006/08/03 JEWEL HILL ELECTRONIC CO.,LTD.
7.2 TIMING CHARACTERISTICS
GB160160A VER: 3.0 - 9 - Issue date: 2006/08/03 JEWEL HILL ELECTRONIC CO.,LTD.
GB160160A VER: 3.0 - 1 0 - Issue date: 2006/08/03 JEWEL HILL ELECTRONIC CO.,LTD.
GB160160A VER: 3.0 - 1 1 - Issue date: 2006/08/03 JEWEL HILL ELECTRONIC CO.,LTD.
GB160160A VER: 3.0 - 1 2 - Issue date: 2006/08/03 JEWEL HILL ELECTRONIC CO.,LTD.
GB160160A VER: 3.0 - 1 3 - Issue date: 2006/08/03 JEWEL HILL ELECTRONIC CO.,LTD.
7.3 APPLICATION OF LCM
/DISPOFF CL1 CL2 M FLM 80C 0086 80SEGs 0086 80SEGs 160*160DOTs INTERFACE M,CL1 /DISPOFFFLM CL2,D0-D3 Circuit Block Diagram
GB160160A VER: 3.0 - 1 4 - Issue date: 2006/08/03 JEWEL HILL ELECTRONIC CO.,LTD. 8. ELECTRO-OPTICAL CHARACTERISTICS Item Symbol Condition Temp Min Typ. Max Units Note 0Ċ --- 17.2 --- 25Ċ 17.0 17.5 18.0 LCD driving voltage VLCD ǀ=Ǐ= 0 50Ċ --- 17.8 --- V NOTE1 Rise Time (Tr) --- --- -- Decay Time (Tf) --- ---- --- Rise Time (Tr) --- 225 340 Decay Time (Tf) 25Ċ --- 240 360 Rise Time (Tr) --- --- -- Response Time Decay Time (Tf) ǀ=Ǐ= 0 50Ċ --- --- -- msec NOTE2 C o n t r a s t R a t i o C r ǀ=Ǐ= 0 25Ċ 5 10 --- --- NOTE4 Viewing Angle Range ǀ(Ǐ= 0°) (6”) Ǐ= 90° (3”) Ǐ=180° (12”) Ǐ=270° (9”) ǀ(25Ċ) CR≥2 45 35 25 35 Deg NOTE3 z For panel only
GB160160A VER: 3.0 - 1 5 - Issue date: 2006/08/03 JEWEL HILL ELECTRONIC CO.,LTD. ․Electro-Optical Characteristics Measuring Equipment(DMS501) Printer Detector Positioning (ǀ,Ǎ) Display Driver Temperature Control LCD Illumination (D65) S y s t e m
GB160160A VER: 3.0 - 1 6 - Issue date: 2006/08/03 JEWEL HILL ELECTRONIC CO.,LTD. ․Note 1. Definition of Driving Voltage( Vlcd) : ․Note 2. Definition of Optical Response Time : 100 Vlcd Vth1 Vth2 Selected Waveform Non-Selected Waveform Operation Voltage SELECTED WAVEFORM (10S EC) WA VEFORM NO SELECTED (10SEC) NO SELECTED WA VEFORM (10SEC) Brightness 90% 100% Tr Rise Time 10% 100% Tf Fall Time t
GB160160A VER: 3.0 - 1 7 - Issue date: 2006/08/03 JEWEL HILL ELECTRONIC CO.,LTD. ․Note 3. Definition of Viewing Angle ǀ and Ǐ : ․Note 4. Definition of Contrast ratio( CR) : B r i g h t n e s s o f N o n - s e l e c t e d S e g m e n t ( B 2 ) B r i g h t n e s s o f S e l e c t e d S e g m e n t ( B 1 ) CR = V,max CR,max Contrast Driving Voltage Brightness (%) Brightness Curve for Selected Segment Brightness Curve for Non-selected Segment 100%
12 O’clock Direction
9 O’clock Direction 3 O’clock Direction
Ǎ=90Ę Ǎ=270Ę Ǎ=180Ę Ǎ=0Ę Viewing Direction
6 O’clock Direction
Ǎ ǀ Normal : ǀ=0Ę
GB160160A VER: 3.0 - 1 8 - Issue date: 2006/08/03 JEWEL HILL ELECTRONIC CO.,LTD. 9. RELIABILITY 9.1. MTBF The LCD module shall be designed to meet a minimum MTBF value of 50000 hours with normal. (25°C in the room without sunlight) 9.2. TESTS NO. ITEM CONDITION CRITERION
1 High Temperature Operating 50Ċ 120Hrs
2 Low Temperature Operating 0Ċ 120Hrs
3 High Temperature/
50Ċ ,90%RH ,120 Hrs
4 High Temperature
60Ċ 120Hrs
5 Low Temperature
-10Ċ 120Hrs
6 Temperature Cycling
0Ċ(30Min )↔ 50Ċ(30Min)
10 CYCLES
Allowable. fIDD of LCM in Pre-and post-test should follow specification Notes: Judgments should be mode after exposure in room temperature for two hours.
GB160160A VER: 3.0 - 1 9 - Issue date: 2006/08/03 JEWEL HILL ELECTRONIC CO.,LTD. 10. PRECAUTIONS FOR USING LCD MODULES 10.1. HANDLING PRECAUTIONS (1) The display panel is made of glass. Do not s ubject it to a mechanical shock or impact by dropping it. (2) If the display panel is damaged and the liquid crys tal substance leaks out, be sure not to get any in your mouth. If the substance contacts your skin or clothes, wash it off using soap and water. (3) Do not apply excessive force to the display surface or the adjoining areas since this may cause the color tone to vary. (4) The polarizer covering the display surface of th e LCD module is soft and easily scratched. Handle this polarizer carefully. (5) If the display surface becomes contaminated, breat he on the surface and gently wipe it with a soft dry cloth. If it is heavily contaminated, moisten a cloth with one of the following solvents: - Isopropyl alcohol - Ethyl alcohol (6) Solvents other than those above mentioned may damage the polarizer. Especially, do not use the following: - Water - Ketone - Aromatic solvents (7) Extra care to minimize corrosion of the electr ode. Water droplets, moisture condensation or a current flow in a high-humidity environment accelerates corrosion of the electrode. (8) Install the LCD Module by using the mounting holes. When mounting the LCD Module, make sure it is free of twisting, warping and distortion. In particular, do not forcibly pull or bend the I/O cable or the backlight cable. (9) Do not attempt to disassemble or process the LCD Module. (10) NC terminal should be open. Do not connect anything. (11) If the logic circuit power is off, do not apply the input signals. (12) To prevent destruction of the elements by sta tic electricity, be careful to maintain an optimum work environment. - Be sure to ground the body when handling he LCD Module. - Tools required for assembling, such as soldering irons, must be properly grounded. -To reduce the amount of static electricity generated, do not conduct assembling and other work under dry conditions.
GB160160A VER: 3.0 - 2 0 - Issue date: 2006/08/03 JEWEL HILL ELECTRONIC CO.,LTD. -The LCD Module is coated with a film to protect the display surface. Exercise care when peeling off this protective film since static electricity may be generated. 10.2. STORAGE CONDITIONS When storing, avoid the LCD module to be exposed to direct sunlight of fluorescent lamps. For stability, to keep it away form high temperature and high humidity environment (The best condition is : 23±5°C, 45±20%RH). ESD protection is necessary for long-term storage also. 10.3. OTHERS Liquid crystals solidify under low temperature (bel ow the storage temperature range) leading to defective orientation or the generation of air bubbl es (black or white). Air bubbles may also be generated if the module is subject to a low temperature. If the LCD Module have been operating for a long time showing the same display patterns the display patterns may remain on the screen as ghost images a nd a slight contrast irregularity may also appear. A normal operating status can be recovered by suspe nding use for some time. It should be noted that this phenomenon does not adversely affect performance reliability. To minimize the performance degradation of the LCD Module resulting from destruction caused by static electricity etc. exercise care to avoid holding the following sections when handling the modules. - Exposed area of the printed circuit board. - Terminal electrode sections.
GB160160A VER: 3.0 - 2 1 - Issue date: 2006/08/03 JEWEL HILL ELECTRONIC CO.,LTD. 11. Using LCD modules
11.1 LIQUID CRYSTAL DISPLAY MODULES
LCD is composed of glass and polarizer. Pay attention to the following items when handling. (1) Please keep the temperature within specified ra nge for use and storage. Polarization degradation, bubble generation or polarizer peel-off may occur with high temperature and high humidity. (2) Do not touch, push or rub the exposed polarizers with anything harder than a HB pencil lead (glass, tweezers, etc). (3) N-hexane is recommended for cleaning the adhe sives used to attach front/rear polarizers and reflectors made of organic substances, which will be damaged by chemicals such as acetone, toluene, toluene, ethanol and isopropyl alcohol. (4) When the display surface becomes dusty, wipe gen tly with absorbent cotton or other soft material like chamois soaked in petroleum ether. Do not scrub hard to avoid damaging the display surface. (5) Wipe off saliva or water drops immediately, contact with water over a long period of time may cause deformation or color fading. (6) Avoid contacting oil and fats. (7) Condensation on the surface and contact with terminals due to cold will damage, stain or polarizers. After products are tested at low temp erature they must be warmed up in a container before coming is contacting with room temperature air. (8) Do not put or attach anything on the display area to avoid leaving marks on. (9) Do not touch the display with bare hands. This will stain the display area and degrade insulation between terminals (some cosmetics are determinate to the polarizers). (10)As glass is fragile, it tends to become or ch ipped during handling especially on the edges. Please avoid dropping or jarring.
11.2 INSTALLING LCD MODULE
Attend to the following items when installing the LCM. (1) Cover the surface with a transparent protective plate to protect the polarizer and LC cell. (2) When assembling the LCM into other equipment, the spacer to the bit between the LCM and the fitting plate should have enough height to avoid cau sing stress to the module surface, refer to the individual specifications for measurements. The measurement tolerance should be ±0.1mm.
11.3 ELECTRO-STATIC DISCHARGE CONTROL
Since this module uses a CMOS LSI, the same car eful attention should be paid for electrostatic discharge as for an ordinary CMOS IC.
GB160160A VER: 3.0 - 2 2 - Issue date: 2006/08/03 JEWEL HILL ELECTRONIC CO.,LTD. (1) Make certain that you are grounded when handing LCM. (2) Before removing LCM from its packing case or in corporating it into a set, be sure the module and your body have the same electric potential. (3) When soldering the terminal of LCM, make certain the AC power source for the soldering iron does not leak. (4) When using an electric screwdriver to a ttach LCM, the screwdriver should be of ground potentiality to minimize as much as possible a ny transmission of electromagnetic waves produced sparks coming from the commutator of the motor. (5) As far as possible, make the electric potential of your work clothes and that of the workbenches to the ground potential. (6) To reduce the generation of electro-static discharge, be careful that the air in the work is not too dried. A relative humidity of 50%-60% is recommended.
11.4 PRECAUTIONS FOR OPERATION
(1) Viewing angle varies with the change of liquid crystal driving voltage (Vo). Adjust Vo to show the best contrast. (2) Driving the LCD in the voltage above the limit will shorten its lifetime. (3) Response time is greatly delayed at temperatur e below the operating temperature range. However, this does not mean the LCD will be out of the order. It will recover when it returns to the specified temperature range. (4) If the display area is pushed hard during operation, the display will become abnormal. However, it will return to normal if it is turned off and then on. (5) Condensation on terminals can cause an electroch emical reaction disrupting the terminal circuit. Therefore, this product must be used and stor ed within the specified condition of 23±5°C, 45±20%RH. (6) When turning the power on, input each signal after the positive/negative voltage becomes stable.
11.5 SAFETY
(1) It is recommended to crush damaged or unnece ssary LCDs into pieces and wash them off with solvents such as acetone and ethanol, which should later be burned. (2) If any liquid leaks out of a damaged glass ce ll and comes in contact with the hands, wash off thoroughly with soap and water.
GB160160A VER: 3.0 - 2 3 - Issue date: 2006/08/03 JEWEL HILL ELECTRONIC CO.,LTD. 12. REVISION HISTORY Version Revise record Date
1.0 Original version 05-12-19
2.0 Change Outline 06-04-26
3.0 Change contact mode 06-08-04
GB160160A VER: 3.0 - 2 4 - Issue date: 2006/08/03 JEWEL HILL ELECTRONIC CO.,LTD. SAMPLE APPROVED REPORT (ဢಒಪֆ) SAMPLE MODEL NO. (ݼGB160160A SAMPLE SERIES NUMBER NO. (ݼ ) SAMPLE QUANTITY (ဢඔਈ) COLOR/TYPE (/ো) YELLOW-GREEN VIEWING DIRECTION (࢘6:00 DRIVING METHOD (ҕඔ) 1/160Duty, 1/12Bias LOGIC VOLTAGE () 5.0V LCD VOP (LCD) 17.5V OPERATING TEMP. (؇0~50¥ STORAGE TEMP. (؇10~60¥ POLARIZER MODE (ோଆൔ) TRANSFLECTIVE/POSITIVE CONTROLLER/DRIVER IC(॥ᇅ/IC) NONE/S6B0086 BACKLIGHT COLOR/TYPE (ჷো/) LED/YELLOW-GREEN DRAWING REV/NO./QUANTITY (ᆼϱЧ/ඔਈ) SPECIFICATION ( ඔ) REMARKSğ (Сᇿ) CUSTOMER’S APPROVAL (ಒಪ)ğ 1Ď FUNCTIONିĎğ O K N . G . 2Ď DRIVER CONDITIONĎğ O K N . G . 3Ď DISPLAY MODE čཁൕଆൔĎğ O K N . G . 4Ď VIEWING ANGLEĎğ O K N . G . 5Ď BACKLIGHTჷĎğ O K N . G . 6Ď DISPLAYING PATTERN Ďğ O K N . G .