GALI-1 MINI | Alldatasheet

Document overview

  • Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
  • PDF pages: 4

Technical content

A. Performance and quality attributes and conditions not expressly stated in this specification document are intended to be excluded and do not form a part of this specification document. B. Electrical specifications and performance data contained in this specification document are based on Mini-Circuit’s applicable established test performance criteria and measurement instructions. C. The parts covered by this specification document are subject to Mini-Circuits standard limited warranty and terms and conditions (collectively, “Standard Terms”); Purchasers of this part are entitled to the rights and benefits contained therein. For a full statement of the Standard Terms and the exclusive rights and remedies thereunder, please visit Mini-Circuits’ website at www.minicircuits.com/MCLStore/terms.jsp Mini-Circuits Product Features

  • InGaP HBT microwave amplifier
  • Miniature SOT-89 package
  • Internally Matched to 50 Ohms
  • Frequency range, DC to 8 GHz
  • Output power, 12.2 dBm typ.
  • Excellent package for heat dissipation, exposed metal bottom
  • Low thermal resistance for high reliability
  • Aqueous washable
  • Protected by US Patent 6,943,629 Typical Applications
  • Cellular
  • PCS
  • Communication receivers & transmitters simplified schematic and pin description Function Pin Number Description RF IN 1 RF input pin. This pin requires the use of an external DC blocking capacitor chosen for the frequency of operation. RF-OUT and DC-IN 3 RF output and bias pin. DC voltage is present on this pin; therefore a DC blocking capacitor is necessary for proper operation. An RF choke is needed to feed DC bias without loss of RF signal due to the bias connection, as shown in “Recommended Application Circuit”. GND 2,4 Connections to ground. Use via holes as shown in “Suggested Layout for PCB Design” to reduce ground path inductance for best performance. General Description Gali 1+ (RoHS compliant) is a wideband amplifier offering high dynamic range. Lead finish is SnAgNi. It has repeatable performance from lot to lot, and is enclosed in a SOT-89 package. It uses patented Transient Protected Darlington configuration and is fabricated using InGaP HBT technology. Expected MTBF is 20,000 years at 85°C case temperature. Gali 1+ is designed to be rugged for ESD and supply switch-on transients. GROUND RF IN RF-OUT and DC-IN REV. S M151107 Gali1+ 150723 DC-8 GHz CASE STYLE: DF782 Gali

3 RF-OUT & DC-IN

2 GROUND

1 RF-IN

+RoHS Compliant The +Suffix identifies RoHS Compliance. See our web site for RoHS Compliance methodologies and qualifications

Monolithic InGaP HBT MMIC Amplifier Notes A. Performance and quality attributes and conditions not expressly stated in this specification document are intended to be excluded and do not form a part of this specification document. B. Electrical specifications and performance data contained in this specification document are based on Mini-Circuit’s applicable established test performance criteria and measurement instructions. C. The parts covered by this specification document are subject to Mini-Circuits standard limited warranty and terms and conditions (collectively, “Standard Terms”); Purchasers of this part are entitled to the rights and benefits contained therein. For a full statement of the Standard Terms and the exclusive rights and remedies thereunder, please visit Mini-Circuits’ website at www.minicircuits.com/MCLStore/terms.jsp Mini-Circuits Page 2 of 4 Parameter Min. Typ. Max. Units Frequency Range* DC 8 GHz Gain f=0.1 GHz — 12.7 — dB f=1 GHz — 12.5 — f=2 GHz 9.0 11.8 — f=3 GHz — 11.3 — f=4 GHz — 10.5 — f=6 GHz — 10.5 — f=8 GHz — 11.0 — Input Return Loss f= DC to 3 GHz 17.5 dB f= 3 to 8 GHz 11.5 Output Return Loss f= DC to 3 GHz 15.5 dB f= 3 to 8 GHz 11 Output Power @ 1 dB compression f=2 GHz 10.5 12.2 — dBm Output IP3 f=2 GHz 27 dBm Noise Figure f=2 GHz 4.5 dB Recommended Device Operating Current 40 mA Device Operating Voltage 3.0 3.4 4.1 V Device Voltage Variation vs. Temperature at 40 mA -2.8 mV/°C Device Voltage Variation vs. Current at 25°C 9.4 mV/mA Thermal Resistance, junction-to-case1 108 °C/W Gali Electrical Specifications at 25°C and 40mA, unless noted Parameter Ratings Operating Temperature* -45°C to 85°C Storage Temperature -65°C to 150°C Operating Current 55mA Input Power 15dBm Note: Permanent damage may occur if any of these limits are exceeded. These ratings are not intended for continuous normal operation. 1Case is defined as ground leads. *Based on typical case temperature rise 2°C above ambient. Absolute Maximum Ratings *Guaranteed specification DC-8 GHz. Low frequency cut off determined by external coupling capacitors.

Monolithic InGaP HBT MMIC Amplifier Notes A. Performance and quality attributes and conditions not expressly stated in this specification document are intended to be excluded and do not form a part of this specification document. B. Electrical specifications and performance data contained in this specification document are based on Mini-Circuit’s applicable established test performance criteria and measurement instructions. C. The parts covered by this specification document are subject to Mini-Circuits standard limited warranty and terms and conditions (collectively, “Standard Terms”); Purchasers of this part are entitled to the rights and benefits contained therein. For a full statement of the Standard Terms and the exclusive rights and remedies thereunder, please visit Mini-Circuits’ website at www.minicircuits.com/MCLStore/terms.jsp Mini-Circuits Page 3 of 4 R BIAS Vcc “1%” Res. Values (ohms) for Optimum Biasing 7 90.9 8 113 9 137 10 162 11 187 12 215 13 237 14 261 15 287 16 309 17 332 18 357 19 383 20 412 Gali 1 2 3 Recommended Application Circuit C block IN C block Ibias OUT V d R F C (Optional) C bypass V cc R bias (R equired) Test Board includes case, connectors, and components (in bold) soldered to PCB Case Style: DF782 Suggested Layout for PCB Design: PL-019 Plastic package, exposed paddle, lead finish: tin-silver over nickel Evaluation Board: TB-409-1+ Tape & Reel: F55 7” reels with 20, 50, 100, 200, 500, 1K devices. Additional Detailed Technical Information Additional information is available on our web site. To access this information enter the model number on our web site home page. Environmental Ratings: ENV08T2 Performance data, graphs, s-parameter data set (.zip file) Product Marking Markings in addition to model number designation may appear for internal quality control purposes.

Monolithic InGaP HBT MMIC Amplifier Notes A. Performance and quality attributes and conditions not expressly stated in this specification document are intended to be excluded and do not form a part of this specification document. B. Electrical specifications and performance data contained in this specification document are based on Mini-Circuit’s applicable established test performance criteria and measurement instructions. C. The parts covered by this specification document are subject to Mini-Circuits standard limited warranty and terms and conditions (collectively, “Standard Terms”); Purchasers of this part are entitled to the rights and benefits contained therein. For a full statement of the Standard Terms and the exclusive rights and remedies thereunder, please visit Mini-Circuits’ website at www.minicircuits.com/MCLStore/terms.jsp Mini-Circuits Page 4 of 4 ESD Rating Human Body Model (HBM): Class 1B (500 v to < 1000 v) in accordance with ANSI/ESD STM 5.1 - 2001 Machine Model (MM): Class M1 (< 100 v) in accordance with ANSI/ESD STM 5.2 - 1999 No. Test Required Condition Standard Quantity

1 Visual Inspection Low Power Microscope

(MCT spec) 45 units

2 Electrical Test Room Temperature SCD

(MCL spec) 45 units

3 SAM Analysis Less than 10% growth in term of

(Jedec Standard) 45 units

4 Moisture Sensitivity

Bake at 125°C for 24 hours Soak at 85°C/85%RH for 168 hours Reflow 3 cycles at 260°C peak J-Std-020C (Jedec Standard) 45 units Visual Inspection Electrical Test SAM Analysis Reflow 3 cycles, 260°C Soak 85°C/85RH 168 hours Bake at 125°C, 24 hours Visual Inspection Electrical Test SAM Analysis Start MSL Test Flow Chart MSL Rating Moisture Sensitivity: MSL1 in accordance with IPC/JEDECJ-STD-020C Gali