GA3092-AL COILCRAFT | Alldatasheet
Document overview
- Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
- PDF pages: 2
Technical content
© Coilcraft, Inc. 2009 Specifications subject to change without notice. Please check our website for latest information. Air Core Inductors Document 625-1 Document 625-1 Revised 03/06/09 SRF DCR Part Inductance2 Q2 typ3 max4 Irms5 Wt number1 ±5% (nH) typ (GHz) (mOhm) (A) (mg) GA3092-AL_ 3.7 120 17.5 2.0 7.0 150 GA3093-AL_ 6.6 107 5.8 2.0 7.0 220 GA3094-AL_ 12.0 105 2.4 2.0 7.0 280 GA3095-AL_ 17.5 115 2.2 2.0 7.0 390 1. When ordering, please pecify packaging code: GA3095-ALC Packaging: C =7 ″ machine-ready reel. EIA-481 embossed plastic tape (250 parts per full reel). B = Less than full reel. In tape, but not machine ready. To have a leader and trailer added ($25 charge), use code letter C instead. D =1 3″ machine-ready reel. EIA-481 embossed plastic tape (1000 parts per full reel). Factory order only, not stocked. 2. L and Q measured at 150 MHz, 0.1 Vrms, 0 A using an Agilent/HP 4291A impedance analyzer with an Agilent/HP 16193A test fixture. 3. SRF measured using an Agilent/HP 8722ES network analyzer and a Coilcraft SMD-D test fixture. 4. DCR measured using a micro-ohmmeter. 5. Current that causes a 15°C temperature rise from 25°C ambient. 6. Electrical specifications at 25°C. Refer to Doc 362 “Soldering Surface Mount Components” before soldering. Terminations RoHS compliant tin-silver over copper Ambient temperature –40°C to +125°C with Irms current, +125°C to +140°C with derated current Storage temperature Component: –40°C to +140°C. Packaging: –40°C to +80°C Resistance to soldering heat Max three 40 second reflows at +260°C, parts cooled to room temperature between cycles Temperature Coefficient of Inductance (TCL) +5 to +70 ppm/°C Moisture Sensitivity Level (MSL) 1 (unlimited floor life at <30°C / 85% relative humidity) Mean Time Between Failures (MTBF) 1 billion hours Packaging 250/7″reel; 1000/13″ reel Plastic tape: 16 mm wide, 0.35 mm thick, 12 mm pocket spacing, 4.9 mm pocket depth PCB washing Only pure water or alcohol recommended These parts have the lowest DCR and highest current ratings of our air-core inductors. Request free evaluation samples by contacting Coilcraft or visiting www.coilcraft.com.
© Coilcraft, Inc. 2009 Specifications subject to change without notice. Please check our website for latest information. Document 625-2 Document 625-2 Revised 03/06/09 Air Core Inductors L vs Frequency Q vs Frequency Irms Derating 1 10 100 1000 10000 Inductance Frequency (MHz) 17.5 nH 6.6 nH 3.7 nH 12.0 nH 250 200 150 100 1 10 100 1000 10000 Q factor Frequency (MHz) 17.5 nH 6.6 nH 3.7 nH 12.0 nH -40 -20 0 20 40 60 80 100 140 120 Ambient temperature (°C) 120 110 100 25°C Percent of rated rms I Dimensions are in inches mm 0.21 5,33max 45° min 135° max Soldered lead length Recommended Land Patterns 0.22 5,59max 0.23 5,84 0.060 1,524 0.235 5,969 0.19 4,83max 0.23 5,84 0.060 1,524 0.205 5,207 0.20 5,08 0.20 5,08max max GA3092-AL GA3093-AL GA3094-AL GA3095-AL 0.19 4,83 0.19 4,83 maxmax 0.23 5,84 0.23 5,84 0.060 1,524 0.060 1,524 0.205 5,207 0.205 5,207 0.20 5,08 0.20 5,08 maxmax