GA0603D1R0BXBAC31M

GA31M VISHAY | Alldatasheet

Document overview

• Manufacturer or author: Provided By alldatasheet.com(free datasheet download site)
• PDF pages: 24

Technical content

www.vishay.com Vishay Vitramon Revision: 08-Dec-2022 1 Document Number: 45248 For technical questions, contact: mlccrf@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 Surface Mount Multilayer Ceramic Chip Capacitors for Automotive High Frequency Applications LINKS TO ADDITIONAL RESOURCES Note

• Models as per VJ HIFREQ Series , applicable for this GA Series

FEATURES

• Case size 0402, 0603, 0805, 0505, 1111, 1206
• High frequency
• AEC-Q200 qualified with PPAP available
• Ultra-stable dielectric material
• Lead (Pb)-free terminations code “X”
• Surface mount, wet build process
• Reliable Noble Metal Electrode (NME) system
• Made with a combination of design, materials and tight process control to achieve very high field reliability
• Material categorization: fo r definitions of compliance please see www.vishay.com/doc?99912

APPLICATIONS

• Navigation / infotainment
• G P S
• T P M S
• A D A S
• Telematics
• Autonomous cars ELECTRICAL SPECIFICATIONS Note
• Electrical characteristics at 25 °C unless otherwise specified Operating Temperature: -55 °C to +150 °C Capacitance Range: 0402: 0.1 pF to 82 pF 0603: 0.1 pF to 470 pF 0805: 0.1 pF to 1.0 nF 0505: 0.1 pF to 1.0 nF 1111: 0.2 pF to 3.3 nF 1206: 1.0 pF to 82 pF Voltage Rating: 25 V DC to 1500 VDC Temperature Coefficient of Capacitance (TCC): C0G (D):0 ppm/°C ± 30 ppm/°C from -55 °C to +150 °C with zero (0) V DC applied Dissipation Factor (DF): C0G (D): 0.05 % max. at 1.0 V RMS and 1 MHz for values ≤ 1000 pF C0G (D): 0.05 % max. at 1.0 VRMS and 1 kHz for values > 1000 pF Aging Rate: 0 % maximum per decade Insulation Resistance (IR): at +25 °C and rated voltage 100 000 M Ω minimum or 1000 ΩF, whichever is less at +125 °C and rated voltage 10 000 M Ω minimum or 100 ΩF, whichever is less Dielectric Strength Test: performed per method 103 of EIA-198-2-E. Applied test voltages: ≤ 200 V DC-rated: min. 250 % of rated voltage 200 VDC-rated: min. 200 % of rated voltage 300 VDC to 1000 VDC-rated: min. 150 % of rated voltage

1500 VDC-rated: 120 % of rated voltage

Design Tools S-Parameters Simulation Tools Infographics

www.vishay.com Vishay Vitramon Revision: 08-Dec-2022 2 Document Number: 45248 For technical questions, contact: mlccrf@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 Notes (1) DC voltage rating should not be exceeded in application (2) AgPd termination code “E” available for silver epoxy bonding QUICK REFERENCE DATA DIELECTRIC CASE MAXIMUM VOLTAGE (V) CAPACITANCE MINIMUM MAXIMUM D = HIFREQ 0402 200 0.1 pF 82 pF 0603 250 0.1 pF 470 pF 0805 500 0.1 pF 1.0 nF 0505 250 0.1 pF 1.0 nF 1111 1500 0.2 pF 3.3 nF 1206 630 1.0 pF 82 pF

ORDERING INFORMATION

GA0603 D 1R0 B X B A C 31M CASE DIELECTRIC CAPACITANCE CAPACITANCE TERMINATION DC VOLTAGE MARKING PACKAGING PROCESS CODE NOMINAL TOLERANCE RATING (1) CODE CODE 0402 0603 0805 0505 1111 1206 D = HIFREQ Expressed in picofarads (pF). The first two digits are significant, the third is a multiplier. An “R” indicates a decimal point. Example: 1R0 = 1.0 pF V = ± 0.05 pF B = ± 0.10 pF C = ± 0.25 pF D = ± 0.50 pF F = ± 1 % G = ± 2 % J = ± 5 % K = ± 10 % M = ± 20 % Note Details see “Selection Chart” E = AgPd (2) X = Ni barrier 100 % tin plate matte finish X = 25 V A = 50 V B = 100 V K = 150 V C = 200 V P = 250 V D = 300 V E = 500 V L = 630 V G = 1000 V R = 1500 V A = no marking 31M = “Green” automotive HIFREQ Ni barrier termination 34G = “Green” automotive HIFREQ AgPd termination T = 7" reel / plastic tape C = 7" reel / paper tape O = 7" reel / flamed paper tape J = 7" reel (low quantity) R = 11 1/4" / 13" reel / plastic tape P = 11 1/4" / 13" reel / paper tape I = 11 1/4" / 13" reel / flamed paper tape Note “I” and “O” is used for “E” termination code ENVIRONMENTAL STATUS TERMINATION CODE TERMINATION DESCRIPTION RoHS COMPLIANT VISHAY GREEN X Ni barrier 100 % tin plated matte finish Yes Yes EA g P d Y e s Y e s

www.vishay.com Vishay Vitramon Revision: 08-Dec-2022 3 Document Number: 45248 For technical questions, contact: mlccrf@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 DIMENSIONS in inches (millimeters) CASE CODE STYLE LENGTH (L) WIDTH (W) MAXIMUM THICKNESS (T) TERMINATIONS PAD (P) MINIMUM MAXIMUM 0402 GA0402 0.040 ± 0.004 (1.02 ± 0.10) 0.020 ± 0.004 (0.51 ± 0.10) 0.024 (0.61) 0.004 (0.10) 0.016 (0.41) 0603 GA0603 0.063 ± 0.006 (1.60 ± 0.15) 0.031 ± 0.005 (0.80 ± 0.12) 0.037 (0.94) 0.010 (0.25) 0.022 (0.55) 0805 GA0805 0.079 ± 0.008 (2.00 ± 0.20) 0.049 ± 0.008 (1.25 ± 0.20) 0.057 (1.45) 0.010 (0.25) 0.030 (0.76) 0505 GA0505 0.055 + 0.015 / - 0.010 0.055 ± 0.015 (1.40 ± 0.38) 0.057 (1.45) 0.004 (0.10) 0.016 (0.41) 1111 GA1111 0.117 + 0.015 / - 0.010 0.102 (2.59) 0.012 (0.30) 0.018 (0.46) 1206 GA1206 0.126 ± 0.010 (3.20 ± 0.25) 0.063 ± 0.010 (1.60 ± 0.25) 0.067 (1.70) 0.010 (0.25) 0.028 (0.71) L W T MAX. P

www.vishay.com Vishay Vitramon Revision: 08-Dec-2022 4 Document Number: 45248 For technical questions, contact: mlccrf@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 SELECTION CHART DIELECTRIC (VISHAY CODE) C0G (D) STYLE GA0402 CASE CODE 0402 VOLTAGE (V DC) 25 50 100 200 TOLERANCEVOLTAGE CODE X A B C CAP. CODE CAP. 620 62 pF •• F, G, J, K, M 680 68 pF •• F, G, J, K, M 750 75 pF •• F, G, J, K, M 820 82 pF •• F, G, J, K, M 910 91 pF 101 100 pF 111 110 pF 121 120 pF Note

• • Paper carrier

www.vishay.com Vishay Vitramon Revision: 08-Dec-2022 5 Document Number: 45248 For technical questions, contact: mlccrf@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 SELECTION CHART DIELECTRIC (VISHAY CODE) C0G (D) STYLE GA0603 CASE CODE 0603 VOLTAGE (V DC) 25 50 100 200 250 TOLERANCEVOLTAGE CODE X A B C P CAP. CODE CAP. Note

• • Paper carrier • Plastic carrier tape

www.vishay.com Vishay Vitramon Revision: 08-Dec-2022 6 Document Number: 45248 For technical questions, contact: mlccrf@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 111 110 pF • • • F, G, J, K, M 121 120 pF • • • F, G, J, K, M 131 130 pF • • • F, G, J, K, M 151 150 pF • • • F, G, J, K, M 181 180 pF • • F, G, J, K, M 201 200 pF • • F, G, J, K, M 221 220 pF • • F, G, J, K, M 241 240 pF • • F, G, J, K, M 271 270 pF • • F, G, J, K, M 301 300 pF • • F, G, J, K, M 331 330 pF • • F, G, J, K, M 361 360 pF • F, G, J, K, M 391 390 pF • F, G, J, K, M 431 430 pF • F, G, J, K, M 471 470 pF • F, G, J, K, M 511 510 pF 561 560 pF 621 620 pF 681 680 pF 751 750 pF 821 820 pF 911 910 pF 102 1.0 nF 112 1.1 nF 122 1.2 nF 132 1.3 nF 152 1.5 nF 182 1.8 nF SELECTION CHART DIELECTRIC (VISHAY CODE) C0G (D) STYLE GA0603 CASE CODE 0603 VOLTAGE (V DC) 25 50 100 200 250 TOLERANCEVOLTAGE CODE X A B C P CAP. CODE CAP. Note

• • Paper carrier • Plastic carrier tape

www.vishay.com Vishay Vitramon Revision: 08-Dec-2022 7 Document Number: 45248 For technical questions, contact: mlccrf@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 SELECTION CHART DIELECTRIC (VISHAY CODE) C0G (D) STYLE GA0805 CASE CODE 0805 VOLTAGE (V DC) 25 50 100 200 250 500 (1) TOLERANCEVOLTAGE CODE X A B C P E CAP. CODE CAP. Notes

• Plastic carrier tape (1) 500 V only in tolerance B, C, D

www.vishay.com Vishay Vitramon Revision: 08-Dec-2022 8 Document Number: 45248 For technical questions, contact: mlccrf@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 1 1 0 1 1 p F ••••• F , G , J , K , M 1 3 0 1 3 p F ••••• F , G , J , K , M 2 0 0 2 0 p F ••••• F , G , J , K , M 2 4 0 2 4 p F ••••• F , G , J , K , M 3 0 0 3 0 p F ••••• F , G , J , K , M 3 6 0 3 6 p F ••••• F , G , J , K , M 4 3 0 4 3 p F ••••• F , G , J , K , M 5 1 0 5 1 p F ••••• F , G , J , K , M 6 2 0 6 2 p F ••••• F , G , J , K , M 7 5 0 7 5 p F ••••• F , G , J , K , M 8 2 0 8 2 p F ••••• F , G , J , K , M 9 1 0 9 1 p F ••••• F , G , J , K , M 1 0 1 1 0 0 p F ••••• F , G , J , K , M 1 1 1 1 1 0 p F ••••• F , G , J , K , M 1 2 1 1 2 0 p F ••••• F , G , J , K , M 1 3 1 1 3 0 p F ••••• F , G , J , K , M 1 5 1 1 5 0 p F ••••• F , G , J , K , M 1 8 1 1 8 0 p F ••••• F , G , J , K , M 2 0 1 2 0 0 p F ••••• F , G , J , K , M 2 2 1 2 2 0 p F ••••• F , G , J , K , M 2 4 1 2 4 0 p F ••••• F , G , J , K , M 2 7 1 2 7 0 p F ••••• F , G , J , K , M 3 0 1 3 0 0 p F ••••• F , G , J , K , M 3 3 1 3 3 0 p F ••••• F , G , J , K , M 361 360 pF • • • • F, G, J, K, M 391 390 pF • • • • F, G, J, K, M 431 430 pF • • • F, G, J, K, M 471 470 pF • • • F, G, J, K, M 511 510 pF • • • F, G, J, K, M 561 560 pF • • • F, G, J, K, M 621 620 pF • • • F, G, J, K, M 681 680 pF • • • F, G, J, K, M 751 750 pF • • F, G, J, K, M 821 820 pF • • F, G, J, K, M 911 910 pF • • F, G, J, K, M 102 1.0 nF • • F, G, J, K, M 112 1.1 nF F, G, J, K, M 122 1.2 nF F, G, J, K, M 132 1.3 nF F, G, J, K, M 152 1.5 nF F, G, J, K, M 182 1.8 nF Notes

• Plastic carrier tape (1) 500 V only in tolerance F, G, J, K SELECTION CHART DIELECTRIC (VISHAY CODE) C0G (D) STYLE GA0805 CASE CODE 0805 VOLTAGE (V DC) 25 50 100 200 250 500 (1) TOLERANCEVOLTAGE CODE X A B C P E CAP. CODE CAP.

www.vishay.com Vishay Vitramon Revision: 08-Dec-2022 9 Document Number: 45248 For technical questions, contact: mlccrf@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 SELECTION CHART DIELECTRIC (VISHAY CODE) C0G (D) STYLE GA0505 CASE CODE 0505 VOLTAGE (V DC) 50 100 150 200 250 TOLERANCEVOLTAGE CODE A B K C P CAP. CODE CAP. Note

• Plastic carrier tape

www.vishay.com Vishay Vitramon Revision: 08-Dec-2022 10 Document Number: 45248 For technical questions, contact: mlccrf@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 101 100 pF • • • • F, G, J, K, M 111 110 pF • • • • F, G, J, K, M 121 120 pF • • • • F, G, J, K, M 131 130 pF • • • • F, G, J, K, M 151 150 pF • • • • F, G, J, K, M 161 160 pF • • • • F, G, J, K, M 181 180 pF • • • • F, G, J, K, M 201 200 pF • • • • F, G, J, K, M 221 220 pF • • • • F, G, J, K, M 241 240 pF • • • • F, G, J, K, M 271 270 pF • • • F, G, J, K, M 301 300 pF • • • F, G, J, K, M 331 330 pF • • • F, G, J, K, M 361 360 pF • • • F, G, J, K, M 391 390 pF • • • F, G, J, K, M 431 430 pF • • • F, G, J, K, M 471 470 pF • • • F, G, J, K, M 511 510 pF • F, G, J, K, M 561 560 pF • F, G, J, K, M 621 620 pF • F, G, J, K, M 681 680 pF • F, G, J, K, M 751 750 pF • F, G, J, K, M 821 820 pF • F, G, J, K, M 911 910 pF • F, G, J, K, M 102 1000 pF • F, G, J, K, M 112 1100 pF 122 1200 pF SELECTION CHART DIELECTRIC (VISHAY CODE) C0G (D) STYLE GA0505 CASE CODE 0505 VOLTAGE (V DC) 50 100 150 200 250 TOLERANCEVOLTAGE CODE A B K C P CAP. CODE CAP. Note

• Plastic carrier tape

www.vishay.com Vishay Vitramon Revision: 08-Dec-2022 11 Document Number: 45248 For technical questions, contact: mlccrf@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 SELECTION CHART DIELECTRIC (VISHAY CODE) C0G (D) STYLE GA1111 CASE CODE 1111 VOLTAGE (V DC) 50 100 200 300 500 630 1000 1500 TOLERANCEVOLTAGE CODE A B C D E L G R CAP. CODE CAP. Note

• Plastic carrier tape

www.vishay.com Vishay Vitramon Revision: 08-Dec-2022 12 Document Number: 45248 For technical questions, contact: mlccrf@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 2 2 1 2 2 0 p F •••••• F , G , J , K , M 2 4 1 2 4 0 p F •••••• F , G , J , K , M 2 7 1 2 7 0 p F •••••• F , G , J , K , M 3 0 1 3 0 0 p F •••••• F , G , J , K , M 3 3 1 3 3 0 p F •••••• F , G , J , K , M 3 6 1 3 6 0 p F •••••• F , G , J , K , M 3 9 1 3 9 0 p F •••••• F , G , J , K , M 4 3 1 4 3 0 p F •••••• F , G , J , K , M 4 7 1 4 7 0 p F •••••• F , G , J , K , M 5 1 1 5 1 0 p F •••• F , G , J , K , M 5 6 1 5 6 0 p F •••• F , G , J , K , M 6 2 1 6 2 0 p F •••• F , G , J , K , M 6 8 1 6 8 0 p F •••• F , G , J , K , M 7 5 1 7 5 0 p F •••• F , G , J , K , M 8 2 1 8 2 0 p F •••• F , G , J , K , M 9 1 1 9 1 0 p F •••• F , G , J , K , M 102 1000 pF •••• F , G , J , K , M 112 1100 pF • • • F, G, J, K, M 122 1200 pF • • • F, G, J, K, M 132 1300 pF • • • F, G, J, K, M 152 1500 pF • • • F, G, J, K, M 162 1600 pF • • • F, G, J, K, M 182 1800 pF • • F, G, J, K, M 202 2000 pF • • F, G, J, K, M 222 2200 pF • • F, G, J, K, M 242 2400 pF • • F, G, J, K, M 272 2700 pF • • F, G, J, K, M 302 3000 pF • • F, G, J, K, M 332 3300 pF • • F, G, J, K, M SELECTION CHART DIELECTRIC (VISHAY CODE) C0G (D) STYLE GA1111 CASE CODE 1111 VOLTAGE (V DC) 50 100 200 300 500 630 1000 1500 TOLERANCEVOLTAGE CODE A B C D E L G R CAP. CODE CAP. Note

• Plastic carrier tape

www.vishay.com Vishay Vitramon Revision: 08-Dec-2022 13 Document Number: 45248 For technical questions, contact: mlccrf@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 SELECTION CHART DIELECTRIC (VISHAY CODE) C0G (D) STYLE GA1206 CASE CODE 1206 VOLTAGE (V DC) 50 100 200 500 630 TOLERANCEVOLTAGE CODE A B C E L CAP. CODE CAP. 1 0 0 1 0 p F ••••• F , G , J , K 1 2 0 1 2 p F ••••• F , G , J , K 1 5 0 1 5 p F ••••• F , G , J , K 1 8 0 1 8 p F ••••• F , G , J , K 2 2 0 2 2 p F ••••• F , G , J , K 2 7 0 2 7 p F ••••• F , G , J , K 3 3 0 3 3 p F ••••• F , G , J , K 3 9 0 3 9 p F ••••• F , G , J , K 4 7 0 4 7 p F ••••• F , G , J , K 5 6 0 5 6 p F ••••• F , G , J , K 6 8 0 6 8 p F ••••• F , G , J , K 8 2 0 8 2 p F ••••• F , G , J , K Note

• Plastic carrier tape

www.vishay.com Vishay Vitramon Revision: 08-Dec-2022 14 Document Number: 45248 For technical questions, contact: mlccrf@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 HIGH FREQ DIELECTRIC - TYPICAL PARAMETERS 100 1000 10000 -0.5 -0.4 -0.3 -0.2 -0.1 0.1 0.2 0.3 0.4 0.5 -100 -50 0 50 100 150 200 Temperature Coefficient of Capacitance 1st line 2nd line 2nd line Capacitance Change (%) Temperature (°C) 100 1000 10000 100 1000 10 000 10 100 5025 150 Minimum Insulation Resistance vs. Temperature 1st line 2nd line 2nd line Insulation Resistance (ΩF) Temperature (°C) 100 1000 10000 -0.2 -0.1 0.1 0.2 1 10 100 1000 10 000 Aging Rate 1st line 2nd line 2nd line Capacitance Change (%) Hours 100 1000 10000 -0.2 -0.1 0.1 0.2 0 50 100 150 200 250 Voltage Coefficient of Capacitance 1st line 2nd line 2nd line Capacitance Change (%) DC Volts Applied 100 1000 10000 0.01 0.1 100 1000 10 000 100 1000 Typical Q Value vs. Frequency (Size 0402) 1st line 2nd line 2nd line Q Frequency (MHz) 1 pF 10 pF 20 pF 39 pF 82 pF 100 1000 10000 0.01 0.1 100 1000 Typical ESR vs. Frequency (Size 0402) 1st line 2nd line 2nd line ESR (Ω) Frequency (MHz) 1 pF 10 pF 20 pF 39 pF82 pF

www.vishay.com Vishay Vitramon Revision: 08-Dec-2022 15 Document Number: 45248 For technical questions, contact: mlccrf@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 HIGH FREQ DIELECTRIC - TYPICAL PARAMETERS 100 1000 10000 100 11 0 1 0 0 Typical SRF / PRF vs. Capacitance (Size 0402) 1st line 2nd line 2nd line SRF / PRF (GHz) Capacitance (pF) PRF SRF 100 1000 10000 0.01 0.1 100 1000 10 000 100 1000 Typical Q Value vs. Frequency (Size 0603) 1st line 2nd line 2nd line Q Frequency (MHz) 1 pF 4.7 pF 6.8 pF 27 pF 18 pF 10 pF 100 pF 100 1000 10000 0.1 100 11 0 1 0 0 1 0 0 0 Typical SRF / PRF vs. Capacitance (Size 0603) 1st line 2nd line 2nd line SRF / PRF (GHz) Capacitance (pF) PRF SRF 100 1000 10000 0.01 0.1 100 1000 Typical ESR vs. Frequency (Size 0603) 1st line 2nd line 2nd line ESR (Ω) Frequency (MHz) 1 pF 4.7 pF 6.8 pF 100 1000 10000 0.01 0.1 100 1000 Typical ESR vs. Frequency (Size 0603) 1st line 2nd line 2nd line ESR (Ω) Frequency (MHz) 270 pF 27 pF 18 pF 10 pF 100 pF 39 pF

www.vishay.com Vishay Vitramon Revision: 08-Dec-2022 16 Document Number: 45248 For technical questions, contact: mlccrf@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 HIGH FREQ DIELECTRIC - TYPICAL PARAMETERS QUAD HIGH FREQ DIELECTRIC - TYPICAL PARAMETERS 100 1000 10000 0.1 100 1000 10 000 100 1000 Typical Q Value vs. Frequency (Size 0805) 1st line 2nd line 2nd line Q Frequency (MHz) 470 pF 62 pF 1.2 pF 10 pF 100 pF 680 pF 100 1000 10000 0.01 0.1 100 1000 Typical ESR vs. Frequency (Size 0805) 1st line 2nd line 2nd line ESR (Ω) Frequency (MHz) 470 pF 62 pF 1.2 pF 10 pF 100 pF 680 pF 100 1000 10000 0.1 100 1 10 100 1000 10 000 Typical SRF / PRF vs. Capacitance (Size 0805) 1st line 2nd line 2nd line SRF / PRF (GHz) Capacitance (pF) PRF SRF 100 1000 10000 0.01 0.1 100 1000 Typical ESR vs. Frequency (Size 0505) 1st line 2nd line 2nd line ESR (Ω) Frequency (MHz) 2 pF 10 pF 24 pF 100 pF 82 pF 56 pF 100 1000 10000 0.01 0.1 100 1000 10 000 100 1000 Typical Q Value vs. Frequency (Size 0505) 1st line 2nd line 2nd line Q Frequency (MHz) 2 pF 10 pF 24 pF 56 pF 82 pF 100 pF

www.vishay.com Vishay Vitramon Revision: 08-Dec-2022 17 Document Number: 45248 For technical questions, contact: mlccrf@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 QUAD HIGH FREQ DIELECTRIC - TYPICAL PARAMETERS 100 1000 10000 0.1 11 0 1 0 0 Typical SRF vs. Capacitance (Size 0505) 1st line 2nd line 2nd line SRF (GHz) Capacitance (pF) 100 1000 10000 0.1 11 0 1 0 0 Current Rating (Size 0505), Extended Voltage 1st line 2nd line 2nd line Current (ARMS) Capacitance (pF)

150 MHz

500 MHz

1000 MHz

0.01 0.1 100 1000 Typical ESR vs. Frequency (Size 1111) 1st line 2nd line 2nd line ESR (Ω) Frequency (MHz) 1 pF 27 pF 33 pF47 pF 10 pF 100 1000 10000 0.1 100 1000 10 000 100 1000 Typical Q Value vs. Frequency (Size 1111) 1st line 2nd line 2nd line Q Frequency (MHz) 1 pF 27 pF 33 pF 47 pF 10 pF 100 1000 10000 0.1 11 0 1 0 0 1 0 0 0 Typical SRF vs. Capacitance (Size 1111) 1st line 2nd line 2nd line SRF (GHz) Capacitance (pF) 100 1000 10000 0.1 100 1 10 100 1000 Current Rating (Size 1111), Extended Voltage 1st line 2nd line 2nd line Current (ARMS) Capacitance (pF)

30 MHz

www.vishay.com Vishay Vitramon Revision: 08-Dec-2022 18 Document Number: 45248 For technical questions, contact: mlccrf@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 1 - GENERAL CERTIFICATES 2 - TECHNICAL REQUIREMENTS Unless specified in component specification, these parameters are the minimum requirements for the components.

2.1 OPERATING TEMPERATURE RANGE

2.2 STORAGE AND HANDLING CONDITIONS

2.3 CHARACTERISTICS

# Quality management system according to ISO/IATF 16949: 2016 Yes # Quality management system according to ISO 9001: 2015 Yes # Environmental certification according to ISO 14001: 2015 Yes # Health and safety system according to ISO 45001 Yes For standard applications T A: -55 °C to +125 °C See characteristics 2.3 For high temperature applications T A: -55 °C to +150 °C See characteristics 2.3 For ultra high temperature applications T A: -55 °C to +175 °C See characteristics 2.3 (1) Store the components at 5 °C to 40 °C ambient temperature and ≤ 70 % relative humidity conditions. (2) The product is recommended to be used within a time-frame of 2 years after shipment. Check solderability in case extended shelf life beyond the expiry date is needed. Precautions: a. Do not store products in an environment containing corrosive elements, especially where chloride gas, sulfide gas, acid, alka li, salt or the like are present. This may cause corrosion or oxidization of the terminations, which can easily lead to poor soldering. b. Store products on the shelf and av oid exposure to moisture or dust. c. Do not expose products to excessive shoc k, vibration, direct sunlight and so on. PARAMETER CERAMIC TYPE SYMBOL RATINGS TEST CONDITIONS / REMARKS Rated voltage in temperature range -55 °C to +125 °C C0G (D) U R 25 V to 1500 V Derating at higher temperature up to +150 °C C0G (D) U R 25 V to 100 V U DC ≤ 1/2 UR Derating at higher temperature up to +175 °C C0G (D) U R 25 V to 100 V U DC ≤ 1/4 UR Temperature coefficient in temperature range -55 °C to +125 °C C0G (D) αC ≤ ± 30 ppm/°C If C R < 10 pF: αC ≤ ± 120 ppm/°C Temperature coefficient in temperature range -55 °C to +150 °C C0G (D) αC ≤ ± 30 ppm/°C If C R < 10 pF: αC ≤ ± 120 ppm/°C Dissipation factor in temperature range -55 °C to +175 °C C0G (D) tan δ≤ 0.0005

www.vishay.com Vishay Vitramon Revision: 08-Dec-2022 19 Document Number: 45248 For technical questions, contact: mlccrf@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 3 - LOT ACCEPTANCE TESTS Process tests available in classes (on request) Upon request the records can be submitted in electronic format on monthly basis.

3.1 THERMAL STRENGTH, THERMAL SHOCK SENSIBILITY

Acceptance criteria: zero defects (IRATS and BIATS).

3.2 BOARD FLEX TEST

3.3 SOLDERABILITY/RESISTANCE TO SOLDERING HEAT

Temperature profile for reflow soldering of SMD parts IPC/JEDEC-J-STD-020C. Test is done on a regular basis for samples taken randomly out of the line. Acceptance criteria: at least 95 % new solder and no detachment or leaching of terminations. 4 - ENVIRONMENTAL REQUIREMENTS A list of the chemical substances content, which must not be used or whose use shall be limited by international law, is available on request. Vishay confirms that the components specified in this specif ication do not contain asbestos nor cadmium, not even in the smallest volumes. The manufacturer/supplier confirms that the component during normal handling, st orage and assembly, as well as during operation in the automobile, is non toxic. GROUP ACTION A Components are tested within the monitoring program of the supplier. The supplier shall submit the part numbers of the selected component to the customer during the component specification discussions. B Components (customer P/N) shall be tested quarterly. Records available only on special request by the customer. C Test with each shipment. Records are provided on a monthly basis. Customer special requirement; requirement should be determined in a specific component specification. Sample size 200 Handling Mounted on PCB Thermal shock 1 x 280 °C, no pre-heat, 5 s to 10 s IR - test (IRATS) U = UR, T = room temperature, verified Burn in (BIATS) Equivalent to 12 h burn-in, 2 x UR/125 °C, verification time to failure Sample size 20 pcs/lot Frequency At least three different part numbers of one component family matrix per quarter Max. deflection 8 mm (data to be reported, available on request)

www.vishay.com Vishay Vitramon Revision: 08-Dec-2022 20 Document Number: 45248 For technical questions, contact: mlccrf@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 5 - INSPECTION CRITERIA The supplier shall carry out visual examin ation with suitable equipme nt with approximately 10 x magnification and lighting appropriate to the specimen under test and the required quality level. Chipping The components shall be free of cracks or fissures. Small damages which do not deteriorate the performance of the component shall be less than as defined in EIA 595. Delamination or Exposed Electrodes No visible separation or delamination between layers of the capacitor and no exposed electrodes between the two terminals of the capacitor must be seen. Metallization For the metallization, no visible detachment of the metallized terminals and no exposed electrodes must be seen. Defects and gaps in the metallization on each sides of the terminal must not exceed 10 % of the total area (e.g. A, B, C, …). Electrode Distance The ceramic body shall be free of any conducting material between the terminals which reduces the distance of the electrodes. The minimum distance “D” is 400 μm for all package sizes, except 0402. For the component package 0402 the minimum distance is 200 μm. C A B D

www.vishay.com Vishay Vitramon Revision: 08-Dec-2022 21 Document Number: 45248 For technical questions, contact: mlccrf@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 6 - BOARD FLEX TEST CONDITIONS

6.1 BOARD FLEX DEFINITIONS OF TEST

PCB thickness = (1.6 ± 0.1) mm Copper thickness = 35 μm Material FR4 (EP-GC 02 according to DIN 40 802) Note

• LL = total length; LB = width of the pad; LEL = single pad length

6.2 SOLDERING INSTRUCTIONS

6.3 TYPICAL TEMPERATURE PROFILE FOR REFLOW SOLDERING (Boardflex test)

LAYOUT / PAD DESIGN (Dimensions in mm) CASE CODE PAD SIZE LL LB LEL 0603 2.20 1.00 0.75 0805 3.40 1.30 1.20 1206 4.50 1.80 1.20THICKNESS, RECOMMENDED FOR SOLDER PASTE (Reflow soldering) CASE CODE THICKNESS IN μm 0603 150 to 200 0805 150 to 200 1206 150 to 200 LEL LL LB TEMPERATURE (°C) 300 250 200 150 100 0 50 100 150 200 250 300 350 400 TIME (s) LEAD (Pb)-FREE SOLDERING PROFILE MIN. 300 s MAX. 260 °C MIN. 255 °C T (SOLID) MIN. 217 °C MIN. 190 °C MIN. 40 s MIN. 90 s RAMP UP TO 150 °C MAX. 3 K/s RAMP DOWN FROM T (SOLID) MAX. 6 K/s MIN. 110 s50

www.vishay.com Vishay Vitramon Revision: 08-Dec-2022 22 Document Number: 45248 For technical questions, contact: mlccrf@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000

6.4 MOUNTING, DIMENSIONS AND TESTING

6.5 PERFORMANCE OF THE TEST(S)

A) Electrical test according to component specification (Cap, DF, IR) B) Mounting to PCB C) Storage at room temperature (min. 10 h) D) Board flex test

6.6 DETAILS

6.7 FAILURE CRITERIA

C0G (D) PCB to be deflected in steps until cracks or other damages are visible or can be measured. Dwell time between steps: (5 ± 1) s C0G (D) ΔC/C < 1 % or < 1 pF, no failures up to min. 2 mm; Electrical test according to component specification SMD under test Solder Support 1.6 ± 0.1 90 ± 1 45 ± 2 Printed board before test R = 3 Mounting Testing + + Material: Aluminum20 Printed board during test Width = actual width of substrate + 5 mm on both sides Radius 1 to 2 Width Displacement D = min. 2 mm All dimensions in mm 10 ± 0.1

www.vishay.com Vishay Vitramon Revision: 08-Dec-2022 23 Document Number: 45248 For technical questions, contact: mlccrf@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 7 - AEC-Q200 QUALIFICATION TESTING Notes (1) Vishay Vitramon uses embossed plastic carrier tape (2) REFERENCE: EIA standard RS 481 - “Taping of Surface Mount Components for Automatic Placement” (3) n/a = not available (4) Packaging “C” / “P” / “O” / “I” and “T” / “R” or lower quantities can depend from product thickness (5) Paper / plastic tape used by availability (6) Final quantities for packaging can depend on product thickness NO. AEC-Q200 TEST ITEM REFERENCE

1 Pre- and post stress electrical test User spec

3 High temp exposure (stora ge) MIL-STD-202, method 108

4 Temperature cycling JESD22, method JA-104

5 Destructive physical analysis EIA-469

6 Moisture resistance MI L-STD-202, method 106

7 Biased humidity MIL-STD-202, method 103

8 Operation life MIL-STD-202 method 108

9 External Visual MIL-STD-883 method 2009

10 Physical dimension J ESD22, method JB-100

13 Mechanical shock MIL-STD-202, method 213

14 Vibration MIL-STD-202, method 204

15 Resistance to solder heat MIL-STD-202, method 210

17 ESD AEC-Q200-002

18 Solderability J-STD-002

21 Board flex AEC-Q200-005

22 Terminal strength AEC-Q200-006

23 Beam load AEC-Q200-003

STANDARD PACKAGING QUANTITIES (1)(2)(3)(6) CASE CODE TAPE SIZE 7" REEL QUANTITIES 11 1/4" AND 13" REEL QUANTITIES PAPER TAPE PACKAGING CODE “C” / “O” PLASTIC TAPE PACKAGING CODE “T” LOW QUANTITY “J” (5) PAPER TAPE PACKAGING CODE “P” / “I” PLASTIC TAPE PACKAGING CODE “R” 0402 8 mm 5000 n/a 1000 10 000 n/a 0603 (4) 8 mm 4000 4000 1000 10 000 10 000 0805 8 mm n/a 3000 1000 n/a 10 000 0505 8 mm n/a 3000 1000 n/a 10 000 1111 8 mm n/a 2500 1000 n/a 9000 1206 8 mm n/a 3000 1000 n/a 10 000

www.vishay.com Vishay Revision: 01-Jan-2023 1 Document Number: 91000 Disclaimer ALL PRODUCT, PRODUCT SPECIFICATIONS AND DATA AR E SUBJECT TO CHANGE WITH OUT NOTICE TO IMPROVE RELIABILITY, FUNCTION OR DESIGN OR OTHERWISE. Vishay Intertechnology, Inc., its affiliates, agents, and employee s, and all persons acting on it s or their behalf (collectivel y, “Vishay”), disclaim any and all liability for any errors, inaccuracies or incompleteness contained in any datasheet or in any other disclosure relating to any product. Vishay makes no warranty, representation or guarantee regarding the suitability of the products for any particular purpose or the continuing production of any product. To the maximum extent permitted by applicable law, Vishay disclaims (i) any and all liability arising out of the application or use of any product , (ii) any and all liability, including without limitation specia l, consequential or incidental damages, and (iii) any and all implied warranties, incl uding warranties of fitness for particular purpose, non-infringement and merchantability. Statements regarding the suitability of pro ducts for certain types of applications are based on Vishay's knowledge of typical requirements that are often placed on Vishay products in ge neric applications. Such statements are not binding statements about the suitability of products for a particular application. It is the customer's responsibility to validate that a particular product with the properties described in the product specification is suitable for use in a particular application. Parameters provided in datasheets and / or specificat ions may vary in different applications and performance may vary over time. All operating parameters, including typical parameters, must be validated for each customer application by the customer's technical experts. Product specifications do not expand or otherwise modify Vishay's terms and conditions of purchase, including but not limited to the warranty expressed therein. Hyperlinks included in this datasheet may direct users to third-party websites. These links are provided as a convenience and for informational purposes only. Inclusion of these hyperlinks does not constitute an endorsement or an approval by Vishay of any of the products, services or opinions of the corporation, organization or individual associated with the third-party website. Vishay disclaims any and all liability and bears no responsibility for the accuracy, legality or content of the third-party web site or for that of subsequent links. Except as expressly indicated in writing, Vishay products are not designed for use in medical, life-saving, or life-sustaining applications or for any other application in which the failure of the Vishay product could result in personal injury or death. Customers using or selling Vishay products not expressly indicated for use in such applications do so at their own risk. Please contact authorized Vishay personnel to obtain written terms and conditions regarding products designed for such applications. No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document or by any conduct of Vishay. Product names and markings noted herein may be trademarks of their respective owners. © 2023 VISHAY INTERTECHNOLOGY, INC. ALL RIGHTS RESERVED