CJ1W-ID OMRON | Alldatasheet

Document overview

  • Manufacturer or author: Provided By alldatasheet.com(free datasheet download site)
  • PDF pages: 25

Technical content

Features

  • High-speed input models are available, meeting versatile applications. ON Response Time: 15μs, OFF Response Time: 90μs
  • Use 24-VDC, 100-VAC, and 200-VAC models to connect to devices with different types of outputs.
  • The 24-VDC models can be connected to devices with either NPN or PNP outputs. There is no need to select the polarity. *1
  • A digital filter in the Unit can be set from 0 to 32 ms to reduce the influence of external noise.
  • Either a Fujitsu or MIL connector interface can be used. *2
  • Several models of Terminal Block Conversion Units are available, making it easy to connect to external devices. *1. The same polarity is used for the same common. *2. For models with 32 or 64 inputs. CJ1W-ID212 CJ1W-ID233

Ordering Information

  • The standards are abbreviated as follows: U: UL, U1: UL (Class I Division 2 Products for Hazardous Locations), C: CSA, UC: cULus, UC1: cULus (Class I Division 2 Products for Hazardous Locations), CU: cUL, N: NK, L: Lloyd, and CE: EC Directives.
  • Contact your OMRON representative for further details and applicable conditions for these standards. Input Units Accessories Connectors are not included for models with connectors. Either use one of the applicable connector listed below or use an applicable Connector- Terminal Block Conversion Unit or I/O Relay Terminal. For details on wiring methods, refer to External Interface. Unit type Product name Specifications Current consumption (A) Model Standards I/O points Input voltage and current Commons External connection No. of words allocated

5 V 24 V

8 inputs 12 to 24 VDC, 10 mA Independent contacts Removable terminal block 1 word 0.09 − CJ1W-ID201 UC1, N, L, CE 16 inputs 24 VDC, 7 mA 16 points, 1 common Removable terminal block 1 word 0.08 − CJ1W-ID211 16 inputs (High speed) 24 VDC, 7 mA 16 points, 1 common Removable terminal block 1 word 0.13 − CJ1W-ID212 N, L, CE 32 inputs 24 VDC, 4.1 mA 16 points, 1 common Fujitsu connector 2 words 0.09 − CJ1W-ID231 UC1, N, L, CE 32 inputs 24 VDC, 4.1 mA 16 points, 1 common MIL connector 2 words 0.09 − CJ1W-ID232 32 inputs (High speed) 24 VDC, 4.1 mA 16 points, 1 common MIL connector 2 words 0.20 − CJ1W-ID233 N, L, CE 64 inputs 24 VDC, 4.1 mA 16 points, 1 common Fujitsu connector 4 words 0.09 − CJ1W-ID261 UC1, N, L, CE 64 inputs 24 VDC, 4.1 mA 16 points, 1 common MIL connector 4 words 0.09 − CJ1W-ID262 AC Input Units 8 inputs 200 to 24 VAC, 10 mA (200 V, 50 Hz) 8 points, 1 common Removable Terminal Block 1 words 0.08 − CJ1W-IA201 16 inputs 100 to 120 VAC, 7 mA (100 V, 50 Hz) 16 points, 1 common Removable Terminal Block 1 words 0.09 − CJ1W-IA111

Fujitsu Connectors for 32-input, 32-output, 64-input, 64-output, 32-input/32-output, and 16-input/16-output Units MIL Connectors for 32-input, 32-output, 64-input, 64-output, 32-input/32-output, and 16-input/16-output Units * Crimp Contacts are also required. Refer to page 20 for details. Applicable Connector-Terminal Block Conversion Units Note: For the combination of Input Units with Connector-Terminal Block Conversion Units, refer to 2. Connecting Connector-Terminal Block Conversion Units. * Representative models only. For details, refer to the XW2R series catalog (Cat. No. G077). Connecting Cables for Connector-Terminal Block Conversion Units Name Connection Remarks Applicable Units Model Standards 40-pin Connectors Soldered FCN-361J040-AU Connector FCN-360C040-J2 Connector Cover Fujitsu Connectors: CJ1W-ID231(32 inputs): 1 per Unit CJ1W-ID261 (64 inputs): 2 per Unit CJ1W-OD231 (32 outputs):1 per Unit CJ1W-OD261 (64 outputs): 2 per Unit CJ1W-MD261 (32 inputs, 32 outputs): 2 per Unit C500-CE404 Crimped FCN-363J040 Housing FCN-363J-AU Contactor FCN-360C040-J2 Connector Cover C500-CE405 Pressure welded FCN-367J040-AU/F C500-CE403 24-pin Connectors Soldered FCN-361J024-AU Connector FCN-360C024-J2 Connector Cover Fujitsu Connectors: CJ1W-MD231 (16 inputs, 16 outputs): 2 per Unit C500-CE241 Crimped FCN-363J024 Socket FCN-363J-AU Contactor FCN-360C024-J2 Connector Cover C500-CE242 Pressure welded FCN-367J024-AU/F C500-CE243 Name Connection Remarks Applicable Units Model Standards 40-pin Connectors Pressure welded FRC5-AO40-3TOS MIL Connectors: CJ1W-ID232/233 (32 inputs): 1 per Unit CJ1W-OD232/233/234 (32 outputs):1 per Unit CJ1W-ID262 (64 inputs): 2 per Unit CJ1W-OD262/263 (64 outputs): 2 per Unit CJ1W-MD263/563 (32 inputs, 32 outputs): 2 per Unit XG4M-4030-T Crimped − XG5N-401* 20-pin Connectors Pressure welded FRC5-AO20-3TOS MIL Connectors: CJ1W-MD232/233 (16 inputs, 16 outputs): 2 per Unit XG4M-2030-T −Crimped − XG5N-201*Type Series Number of poles Wiring method Terminal type Size Mounting Common terminals Bleeder resistance Indicators I/O Units Model * StandardsDepth (mm) Height (mm) Width (mm) DIN Track Screws PLCs XW2R 34 Phillips screw M3 50 48.05 130.7 Yes No No No No CJ1W-ID231 CJ1W-ID261 XW2R-J34GD-C1 CJ1W-ID232 CJ1W-ID233 CJ1W-ID262 XW2R-J34GD-C2 Slotted screw (rise up) (European type) 50 44.81 98.5 CJ1W-ID231 CJ1W-ID261 XW2R-E34GD-C1 CJ1W-ID232 CJ1W-ID233 CJ1W-ID262 XW2R-E34GD-C2 Push-in spring Clamp 50 44.81 98.5 CJ1W-ID231 CJ1W-ID261 XW2R-P34GD-C1 CJ1W-ID232 CJ1W-ID233 CJ1W-ID262 XW2R-P34GD-C2 Appearance Connectors Cable lenght [m] Model XW2Z-@@@PF One 40-pin Fujitsu Connector to One 40-pin MIL Connector

0.5 XW2Z-050PF

1 XW2Z-100PF

1.5 XW2Z-150PF

2 XW2Z-200PF

3 XW2Z-300PF

5 XW2Z-500PF

XW2Z-@@@PM One 40-pin MIL Connector to One 40-pin MIL Connector

0.5 XW2Z-050PM

1 XW2Z-100PM

1.5 XW2Z-150PM

2 XW2Z-200PM

3 XW2Z-300PM

5 XW2Z-500PM

Applicable I/O Relay Terminals *1. G70A is a I/O terminal socket product. Relay is not provided with the socket. Be sure to order a relay, timer separately. *2. Each relay to be mounted must incorporate a coil that has proper specifications within the maximum rated voltage range. *3. Eight or fewer points ON: 5 A, Nine or more points ON: 3 A. *4. Internal common at terminal block: No internal connections *5. Internal common at terminal block: Inter nal IO common 16 points internally connected *6. Internal common at terminal block: Every 4 points internally connected at terminal block middle row. *7. Product no longer available to order. Note: 1. For the combination of Input Units with I/O Relay Terminal and Connecting Cables, refer to 3. Connecting I/O Relay Terminals. 2. Please refer to each Datasheet about details. 3. When the G7TC is used with an AC rated voltage, three rated currents can be used. If a coil voltage of 110 or 220 VAC is used, 50 Hz cannot be used. Type Series Specifications Size (horizontal mounting) Mounting Model Standards Classification Polarity Number of points Rated ON current at contacts Rated voltage Horizontal (mm) Vertical (mm) Height (mm) DIN Track Screws Push-In Plus terminal block G70V Inputs DC inputs NPN (SPSTNO × 16) 50 mA

24 VDC 143 90 56 Yes Yes

G70V-SID16P *4 UC, CE (TÜV certified) PNP G70V-SID16P-1 *4 NPN G70V-SID16P-C16 *5 PNP G70V-SID16P-1-C16 *5 Outputs Relay outputs NPN (SPDT × 16)

6 A/point,

G70V-SOC16P *4 PNP G70V-SOC16P-1 *4 NPN G70V-SOC16P-C4 *6 PNP G70V-SOC16P-1-C4 *6 Standard G7TC Inputs AC inputs NPN 16 (SPSTNO × 16) 1A 100/(110) VAC 182 85 68 Yes No G7TC-IA16 AC100/110 U, C 200/(220) VAC G7TC-IA16 AC200/220 DC inputs

12 VDC G7TC-ID16 DC12

24 VDC G7TC-ID16 DC24

100/110 VDC G7TC-ID16 DC100/110 Outputs Relay outputs NPN (SPSTNO × 8)

12 VDC

24 VDC G7TC-OC08 DC24

(SPSTNO × 16)

24 VDC G7TC-OC16 DC24

(SPSTNO × 16)

12 VDC G7TC-OC16-1 DC12

24 VDC G7TC-OC16-1 DC24

G70A *1 (Socket only) Inputs Relay inputs NPN/ PNP (SPDT × 16 possible with G2R Relays) 100 mA

110 VDC

max., 240 VAC max. 234 75 64 Yes No G70A-ZOC16-5 U, C, CE (VDE certified) Outputs Relay outputs NPN 10 A (Ter- minal block al- lowable

24 VDC

(SPSTNO × 16) 5 A or 3 A *3 U, C, CE (VDE certified) MOSFET relay outputs

0.3 A G70D-VFOM16

(SPSTNO × 8) 5 A 68 93 44 Yes Yes G70D-SOC08 (SPSTNO × 16) 3 A 156 51 39 G70D-SOC16 PNP 16 (SPSTNO × 16) 3 A G70D-SOC16-1 MOSFET relay outputs NPN 16 (SPSTNO × 16) 0.3 A G70D-FOM16 PNP G70D-FOM16-1 High- capacity, space- saving G70R Outputs Relay outputs NPN 8 (SPSTNO × 8) 10 A 24 VDC 136 93 55 Yes Yes G70R-SOC08 *7 −

Cables for I/O Relay Terminals Note: Refer to the Datasheet for the XW2Z-R Cables for I/O Relay Terminals (Cat. No. G126). Mountable Racks Type Name I/O Classification Appearance Cable length L (mm) Models Fujitsu connectors (24 pins) Cables with Connectors (1:1) XW2Z-R C

16 I/O points

1,000 XW2Z-R100C 1,500 XW2Z-R150C 2,000 XW2Z-R200C 3,000 XW2Z-R300C 5,000 XW2Z-R500C Fujitsu connectors (40 pins) Cables with Connectors (1:2) XW2Z-RI XW2Z-RO 32 input points (A) 1,000 (B) 750 XW2Z-RI100C-75 (A) 1,500 (B) 1,250 XW2Z-RI150C-125 (A) 2,000 (B) 1,750 XW2Z-RI200C-175 (A) 3,000 (B) 2,750 XW2Z-RI300C-275 (A) 5,000 (B) 4,750 XW2Z-RI500C-475 32 output points (A) 1,000 (B) 750 XW2Z-RO100C-75 (A) 1,500 (B) 1,250 XW2Z-RO150C-125 (A) 2,000 (B) 1,750 XW2Z-RO200C-175 (A) 3,000 (B) 2,750 XW2Z-RO300C-275 (A) 5,000 (B) 4,750 XW2Z-RO500C-475 MIL connectors (20 pins) Cables with Connectors (1:1) XW2Z-RI C XW2Z-RO C

250 XW2Z-RI25C

500 XW2Z-RI50C

250 XW2Z-RO25C

500 XW2Z-RO50C

MIL connectors (40 pins) Cables with Connectors (1:2) XW2Z-RO -D1, XW2Z-RI -D1

32 I/O points

(A) 500 (B) 250 XW2Z-RO50-25-D1 (A) 750 (B) 500 XW2Z-RO75-50-D1 (A) 1,000 (B) 750 XW2Z-RO100-75-D1 (A) 1,500 (B) 1,250 XW2Z-RO150-125-D1 (A) 2,000 (B) 1,750 XW2Z-RO200-175-D1 (A) 3,000 (B) 2,750 XW2Z-RO300-275-D1 (A) 5,000 (B) 4,750 XW2Z-RO500-475-D1 (A) 500 (B) 250 XW2Z-RI50-25-D1 (A) 750 (B) 500 XW2Z-RI75-50-D1 (A) 1,000 (B) 750 XW2Z-RI100-75-D1 (A) 1,500 (B) 1,250 XW2Z-RI150-125-D1 (A) 2,000 (B) 1,750 XW2Z-RI200-175-D1 (A) 3,000 (B) 2,750 XW2Z-RI300-275-D1 (A) 5,000 (B) 4,750 XW2Z-RI500-475-D1 Model NJ system CJ system (CJ1, CJ2) CP1H system NSJ system CPU Rack Expansion Rack CPU Rack Expansion Backplane CP1H PLC NSJ Controller Expansion Backplane CJ1W-ID201

10 Units

(per Expansion Rack) (per Expansion Backplane) Not supported Not supported (per Expansion Backplane) CJ1W-ID211 CJ1W-ID212 CJ1W-ID231 CJ1W-ID232 CJ1W-ID233 CJ1W-ID261 CJ1W-ID262 CJ1W-IA201 CJ1W-IA111 L A side B side Device end I/O Relay Terminal Straight length (without bends) (120) (A) (B) A side B side Device end I/O Relay Terminal L A side B side Device end I/O Relay Terminal (B) Straight length (without bends) (120) (A) A side B side Device end I/O Relay Terminal

CJ1W-ID201 DC Input Unit (12 to 24-VDC, 8 Points) *1. The ON response time will be 20 μs maximum and OFF response time will be 400 μs maximum even if the response time are set to 0 ms due to internal element delays. *2. Terminal numbers A0 to A8 and B0 to B8 are used in the external connection and terminal-device variable diagrams. They are not printed on the Units. Note: Although 16 I/O bits (1 word) are allocated, only 8 of these can be used for external I/O. Name 8-point DC Input Unit with Terminal Block Model CJ1W-ID201 Rated Input Voltage 12 to 24 VDC Rated Input Voltage Range 10.2 to 26.4 VDC Input Impedance 2.4 kΩ Input Current 10 mA typical (at 24 VDC) ON Voltage/ON Current 8.8 VDC min./3 mA min. OFF Voltage/OFF Current 3 VDC max./1 mA max. ON Response Time 8.0 ms max. (Can be set to between 0 and 32 ms in the Setup.) *1 OFF Response Time 8.0 ms max. (Can be set to between 0 and 32 ms in the Setup.) *1 Number of Circuits 8 independent circuits Number of Simultaneously ON Points 100% simultaneously ON Insulation Resistance 20 MΩ min. between external terminals and the GR terminal (100 VDC) Dielectric Strength 1,000 VAC between the external terminals and the GR terminal for 1 minute at a leakage current of 10 mA max. Internal Current Consumption 80 mA max. Weight 110 g max. Circuit Configuration

  • The signal names of the terminals are the device variable names. The device variable names are the names that use "Jxx" as the device name. External connection and terminal-device variable diagram
  • Polarity of the input power supply can be connected in either direction.
  • The signal names of the terminals are the device variable names. The device variable names are the names that use "Jxx" as the device name. 560 Ω 2.4 kΩ 560 Ω 2.4 kΩ 1000 pF Input indicator Internal circuits to 1000 pF Input indicator Internal circuits Signal name COM7 Jxx_Ch1_In07 COM0 Jxx_Ch1_In00 Signal name Signal name Con- nector pin NC NC 12ʙ24V DC

CJ1W-ID211 DC Input Unit (24 VDC, 16 Points) *1. The ON response time will be 20 μs maximum and OFF response time will be 400 μs maximum even if the response time are set to 0 ms due to internal element delays. *2. Terminal numbers A0 to A8 and B0 to B8 are used in the external connection and terminal-device variable diagrams. They are not printed on the Units. Name 16-point DC Input Unit with Terminal Block Model CJ1W-ID211 Rated Input Voltage 24 VDC Rated Input Voltage Range 20.4 to 26.4 VDC Input Impedance 3.3 kΩ Input Current 7 mA typical (at 24 VDC) ON Voltage/ON Current 14.4 VDC min./3 mA min. OFF Voltage/OFF Current 5 VDC max./1 mA max. ON Response Time 8.0 ms max. (Can be set to between 0 and 32 ms in the Setup.) *1 OFF Response Time 8.0 ms max. (Can be set to between 0 and 32 ms in the Setup.) *1 Number of Circuits 16 (16 points/common, 1 circuit) Number of Simultaneously ON Points 100% simultaneously ON (at 24 VDC) (Refer to the following illustration.) Insulation Resistance 20 MΩ min. between external terminals and the GR terminal (100 VDC) Dielectric Strength 1,000 VAC between the external terminals and the GR terminal for 1 minute at a leakage current of 10 mA max. Internal Current Consumption 80 mA max. Weight 110 g max. Circuit Configuration

  • The signal names of the terminals are the device variable names. The device variable names are the names that use "Jxx" as the device name. External connection and terminal-device variable diagram
  • Polarity of the input power supply can be connected in either direction.
  • The signal names of the terminals are the device variable names. The device variable names are the names that use "Jxx" as the device name. Internal circuitsInput indicator to Signal name 1000 pF 470 Ω3.3 kΩ Jxx_Ch1_In00 Jxx_Ch1_In15 COM COM 0 0 10 20 30 40 50 60 No. of simultaneously ON points Input voltage: 26.4 VDC 12 points at 55°C. 16 points at 45°C. Ambient temperature (°C) Temperature characteristics for simultaneously ON points

Jxx_Ch1_In01 Jxx_Ch1_In03 Jxx_Ch1_In05 Jxx_Ch1_In07 Jxx_Ch1_In09 Jxx_Ch1_In11 Jxx_Ch1_In13 Jxx_Ch1_In15 COM Jxx_Ch1_In00 Jxx_Ch1_In02 Jxx_Ch1_In04 Jxx_Ch1_In06 Jxx_Ch1_In08 Jxx_Ch1_In10 Jxx_Ch1_In12 Jxx_Ch1_In14 COM Signal name Signal name Connector pin

CJ1W-ID212 DC Input Unit (24 VDC, 16 Points) *1. The ON response time will be 15 μs maximum and OFF response time will be 90 μs maximum even if the response time are set to 0 ms due to internal element delays. *2. Terminal numbers A0 to A8 and B0 to B8 are used in the external connection and terminal-device variable diagrams. They are not printed on the Units. Name 16-point DC Input Unit with Terminal Block Model CJ1W-ID212 Rated Input Voltage 24 VDC Rated Input Voltage Range 20.4 to 26.4 VDC Input Impedance 3.3 kΩ Input Current 7 mA typical (at 24 VDC) ON Voltage/ON Current 14.4 VDC min./3 mA min. OFF Voltage/OFF Current 5 VDC max./1 mA max. ON Response Time 8.0 ms max. (Can be set to between 0 and 32 ms in the Setup.) *1 OFF Response Time 8.0 ms max. (Can be set to between 0 and 32 ms in the Setup.) *1 Number of Circuits 16 (16 points/common, 1 circuit) Number of Simultaneously ON Points 100% simultaneously ON (at 24 VDC) (Refer to the following illustration.) Insulation Resistance 20 MΩ min. between external terminals and the GR terminal (100 VDC) Dielectric Strength 1,000 VAC between the external terminals and the GR terminal for 1 minute at a leakage current of 10 mA max. Internal Current Consumption 130 mA max. Weight 110 g max. Circuit Configuration

  • The signal names of the terminals are the device variable names. The device variable names are the names that use "Jxx" as the device name. External connection and terminal-device variable diagram
  • Polarity of the input power supply can be connected in either direction.
  • The signal names of the terminals are the device variable names. The device variable names are the names that use "Jxx" as the device name. 1000 pF 470 Ω3.3 kΩ Internal circuits Input indicator to Signal name Jxx_Ch1_In00 Jxx_Ch1_In15 COM COM 0 0 10 20 30 40 50 60 No. of simultaneously ON points Input voltage: 26.4 VDC 12 points at 55°C. 16 points at 45°C. Ambient temperature (°C) Temperature characteristics for simultaneously ON points Jxx_Ch1_In01 Jxx_Ch1_In03 Jxx_Ch1_In05 Jxx_Ch1_In07 Jxx_Ch1_In09 Jxx_Ch1_In11 Jxx_Ch1_In13 Jxx_Ch1_In15 COM Jxx_Ch1_In00 Jxx_Ch1_In02 Jxx_Ch1_In04 Jxx_Ch1_In06 Jxx_Ch1_In08 Jxx_Ch1_In10 Jxx_Ch1_In12 Jxx_Ch1_In14 COM

CJ1W-ID231 DC Input Unit (24 VDC, 32 Points) * The ON response time will be 20 μs maximum and OFF response time will be 400 μs maximum even if the response times are set to 0 ms due to internal element delays. Note: Observe the following restrictions when connecting to a 2-wire sensor.

  • Make sure the input power supply voltage is larger than the ON voltage (19 V) plus the residual voltage of the sensor (approx. 3 V).
  • Use a sensor with a minimum load current of 3 mA min.
  • Connect bleeder resistance if you connect a sensor with a minimum load current of 5 mA or higher. Name 32-point DC Input Unit with Fujitsu Connector Model CJ1W-ID231 Rated Input Voltage 24 VDC Rated Input Voltage Range 20.4 to 26.4 VDC Input Impedance 5.6 kΩ Input Current 4.1 mA typical (at 24 VDC) ON Voltage/ON Current 19.0 VDC min./3 mA min. OFF Voltage/OFF Current 5 VDC max./1 mA max. ON Response Time 8.0 ms max. (Can be set to between 0 and 32 in the Setup.) * OFF Response Time 8.0 ms max. (Can be set to between 0 and 32 in the Setup.) * Number of Circuits 32 (16 points/common, 2 circuits) Number of Simultaneously ON Points 75% (12 points/common) simultaneously ON (at 24 VDC) (Refer to the following illustration.) Insulation Resistance 20 MΩ min. between external terminals and the GR terminal (100 VDC) Dielectric Strength 1,000 VAC between the external terminals and the GR terminal for 1 minute at a leakage current of 10 mA max. Internal Current Consumption 90 mA max. Weight 70 g max. Accessories None Circuit Configuration
  • The signal names of the terminals are the device variable names. The device variable names are the names that use "Jxx" as the device name. External connection and terminal-device variable diagram
  • The input power polarity can be connected in either direction.
  • Be sure to wire both pins A9 and A18 (COM0), and set the same polarity for both pins.
  • Be sure to wire both pins B9 and B18 (COM1), and set the same polarity for both pins.
  • The signal names of the terminals are the device variable names. The device variable names are the names that use "Jxx" as the device name. 560 Ω560 Ω 5.6 kΩ 5.6 kΩ 1000 pF1000 pF Internal circuitsInput indicator to toWd m+1 Wd m Allocated CIO word Signal nameConnector row A Connector row B Jxx_Ch1_In00 Jxx_Ch1_In15 COM0 Jxx_Ch2_In00 Jxx_Ch2_In15 COM1 COM0 COM1 SW 01 0 2 0 3 0 4 0 5 0 6 0 Number of Simultaneously ON Points vs. Ambient Temperature Characteristic Number of simultaneously ON points Ambient Temperature (°C) 10 points/ common at 55°C 12 points/ common at 55°C Input voltage:

26.4 VDC

Input voltage: 32 points at 48°C32 points at 40°C Allocated CIO word Allocated CIO word Wd m+1Wd m VDC Wd m Wd m+1 VDC Signal name Signal name Connec- tor pin Jxx_Ch1_In00 Jxx_Ch1_In01 Jxx_Ch1_In02 Jxx_Ch1_In03 Jxx_Ch1_In04 Jxx_Ch1_In05 Jxx_Ch1_In06 Jxx_Ch1_In07 Jxx_Ch2_In00 Jxx_Ch2_In01 Jxx_Ch2_In02 Jxx_Ch2_In03 Jxx_Ch2_In04 Jxx_Ch2_In05 Jxx_Ch2_In06 Jxx_Ch2_In07 COM0 Jxx_Ch1_In08 Jxx_Ch1_In09 Jxx_Ch1_In10 Jxx_Ch1_In11 Jxx_Ch1_In12 Jxx_Ch1_In13 Jxx_Ch1_In14 Jxx_Ch1_In15 Jxx_Ch2_In08 Jxx_Ch2_In09 Jxx_Ch2_In10 Jxx_Ch2_In11 Jxx_Ch2_In12 Jxx_Ch2_In13 Jxx_Ch2_In14 Jxx_Ch2_In15 COM0 NC NC COM1 COM1 NC NC A10 A11 A12 A13 A14 A15 A16 A17 A18 A19 A20 B10 B11 B12 B13 B14 B15 B16 B17 B18 B19 B20

CJ1W-ID232 DC Input Unit (24 VDC, 32 Points) * The ON response time will be 20 μs maximum and OFF response time will be 400 μs maximum even if the response times are set to 0 ms due to internal element delays. Note: Observe the following restrictions when connecting to a 2-wire sensor.

  • Make sure the input power supply voltage is larger than the ON voltage (19 V) plus the residual voltage of the sensor (approx. 3 V).
  • Use a sensor with a minimum load current of 3 mA min.
  • Connect bleeder resistance if you connect a sensor with a minimum load current of 5 mA or higher. Name 32-point DC Input Unit with MIL Connector Model CJ1W-ID232 Rated Input Voltage 24 VDC Rated Input Voltage Range 20.4 to 26.4 VDC Input Impedance 5.6 kΩ Input Current 4.1 mA typical (at 24 VDC) ON Voltage/ON Current 19.0 VDC min./3 mA min. OFF Voltage/OFF Current 5 VDC max./1 mA max. ON Response Time 8.0 ms max. (Can be set to between 0 and 32 in the Setup.) * OFF Response Time 8.0 ms max. (Can be set to between 0 and 32 in the Setup.) * Number of Circuits 32 (16 points/common, 2 circuits) Number of Simultaneously ON Points 75% (12 points/common) simultaneously ON (at 24 VDC) (Refer to the following illustration.) Insulation Resistance 20 MΩ min. between external terminals and the GR terminal (100 VDC) Dielectric Strength 1,000 VAC between the external terminals and the GR terminal for 1 minute at a leakage current of 10 mA max. Internal Current Consumption 90 mA max. Weight 70 g max. Accessories None Circuit Configuration
  • The signal names of the terminals are the device variable names. The device variable names are the names that use "Jxx" as the device name. External connection and terminal-device variable diagram
  • The input power polarity can be connected in either direction.
  • Be sure to wire both pins 23 and 24 (COM0), and set the same polarity for both pins.
  • Be sure to wire both pins 3 and 4 (COM1), and set the same polarity for both pins.
  • The signal names of the terminals are the device variable names. The device variable names are the names that use "Jxx" as the device name. 560 Ω560 Ω 5.6 kΩ 5.6 kΩ 1000 pF1000 pF Internal circuits Input indicator to toWd m+1 Wd m Allocated CIO word Signal name Connector row A Connector row B Jxx_Ch1_In00 Jxx_Ch1_In15 COM0 Jxx_Ch2_In00 Jxx_Ch2_In15 COM1 COM0 COM1 SW 01 0 2 0 3 0 4 0 5 0 6 0 Number of simultaneously ON points Ambient Temperature (°C) 10 points/common at 55°C 12 points/common at 55°C Input voltage:

Input voltage: 32 points at 48°C32 points at 40°C Number of Simultaneously ON Points vs. Ambient Temperature Characteristic Wd m+1 Wd m+1 Wd m Wd m

4 COM1

6 Jxx_Ch2_In07

8 Jxx_Ch2_In06

10 Jxx_Ch2_In05

12 Jxx_Ch2_In04

14 Jxx_Ch2_In03

16 Jxx_Ch2_In02

18 Jxx_Ch2_In01

20 Jxx_Ch2_In00

Jxx_Ch1_In07 Jxx_Ch1_In06 Jxx_Ch1_In05 Jxx_Ch1_In04 Jxx_Ch1_In03 Jxx_Ch1_In02 Jxx_Ch1_In01 Jxx_Ch1_In00 22 NC 1NC 3COM1 5Jxx_Ch2_In15 7Jxx_Ch2_In14 9Jxx_Ch2_In13 11Jxx_Ch2_In12 13Jxx_Ch2_In11 15Jxx_Ch2_In10 17Jxx_Ch2_In09 19Jxx_Ch2_In08 21NC COM0 COM0 Jxx_Ch1_In15 Jxx_Ch1_In14 Jxx_Ch1_In13 Jxx_Ch1_In12 Jxx_Ch1_In11 Jxx_Ch1_In10 Jxx_Ch1_In09 Jxx_Ch1_In08

CJ1W-ID233 DC Input Unit (24 VDC, 32 Points) * The ON response time will be 15 μs maximum and OFF response time will be 90 μs maximum even if the response times are set to 0 ms due to internal element delays. Note: Observe the following restrictions when connecting to a 2-wire sensor.

  • Make sure the input power supply voltage is larger than the ON voltage (19 V) plus the residual voltage of the sensor (approx. 3 V).
  • Use a sensor with a minimum load current of 3 mA min.
  • Connect bleeder resistance if you connect a sensor with a minimum load current of 5 mA or higher. Name 32-point DC Input Unit with MIL Connector Model CJ1W-ID233 Rated Input Voltage 24 VDC Rated Input Voltage Range 20.4 to 26.4 VDC Input Impedance 5.6 kΩ Input Current 4.1 mA typical (at 24 VDC) ON Voltage/ON Current 19.0 VDC min./3 mA min. OFF Voltage/OFF Current 5 VDC max./1 mA max. ON Response Time 8.0 ms max. (Can be set to between 0 and 32 in the Setup.) * OFF Response Time 8.0 ms max. (Can be set to between 0 and 32 in the Setup.) * Number of Circuits 32 (16 points/common, 2 circuits) Number of Simultaneously ON Points 75% (12 points/common) simultaneously ON (at 24 VDC) (Refer to the following illustration.) Insulation Resistance 20 MΩ min. between external terminals and the GR terminal (100 VDC) Dielectric Strength 1,000 VAC between the external terminals and the GR terminal for 1 minute at a leakage current of 10 mA max. Internal Current Consumption 200 mA max. Weight 70 g max. Accessories None Circuit Configuration
  • The signal names of the terminals are the device variable names. The device variable names are the names that use "Jxx" as the device name. External connection and terminal-device variable diagram
  • The input power polarity can be connected in either direction.
  • Be sure to wire both pins 23 and 24 (COM0), and set the same polarity for both pins.
  • Be sure to wire both pins 3 and 4 (COM1), and set the same polarity for both pins.
  • The signal names of the terminals are the device variable names. The device variable names are the names that use "Jxx" as the device name. 560 Ω560 Ω 5.6 kΩ 5.6 kΩ 1000 pF1000 pF Internal circuits Input indicator to toWd m+1 Wd m Allocated CIO word Signal name Connector row A Connector row B Jxx_Ch1_In00 Jxx_Ch1_In15 COM0 Jxx_Ch2_In00 Jxx_Ch2_In15 COM1 COM0 COM1 SW 01 0 2 0 3 0 4 0 5 0 6 0 Number of simultaneously ON points Ambient Temperature (°C) 10 points/common at 55°C 12 points/common at 55°C Input voltage:

Input voltage: 32 points at 48°C32 points at 40°C Number of Simultaneously ON Points vs. Ambient Temperature Characteristic Wd m+1 Wd m+1 Wd m Wd m Jxx_Ch1_In07 Jxx_Ch1_In06 Jxx_Ch1_In05 Jxx_Ch1_In04 Jxx_Ch1_In03 Jxx_Ch1_In02 Jxx_Ch1_In01 Jxx_Ch1_In00 22 NC 1NC 3COM1 5Jxx_Ch2_In15 7Jxx_Ch2_In14 9Jxx_Ch2_In13 11Jxx_Ch2_In12 13Jxx_Ch2_In11 15Jxx_Ch2_In10 17Jxx_Ch2_In09 19Jxx_Ch2_In08 21NC COM0 COM0 Jxx_Ch1_In15 Jxx_Ch1_In14 Jxx_Ch1_In13 Jxx_Ch1_In12 Jxx_Ch1_In11 Jxx_Ch1_In10 Jxx_Ch1_In09 Jxx_Ch1_In08

CJ1W-ID261 DC Input Unit (24 VDC, 64 Points) * The ON response time will be 120 μs maximum and OFF response time will be 400 μs maximum even if the response times are set to 0 ms due to internal element delays. Note: Observe the following restrictions when connecting to a 2-wire sensor.

  • Make sure the input power supply voltage is larger than the ON voltage (19 V) plus the residual voltage of the sensor (approx. 3 V).
  • Use a sensor with a minimum load current of 3 mA min.
  • Connect bleeder resistance if you connect a sensor with a minimum load current of 5 mA or higher. Name 64-point DC Input Unit with Fujitsu Connector Model CJ1W-ID261 Rated Input Voltage 24 VDC Rated Input Voltage Range 20.4 to 26.4 VDC Input Impedance 5.6 kΩ Input Current 4.1 mA typical (at 24 VDC) ON Voltage/ON Current 19.0 VDC min./3 mA min. OFF Voltage/OFF Current 5 VDC max./1 mA max. ON Response Time 8.0 ms max. (Can be set to between 0 and 32 in the Setup.) * OFF Response Time 8.0 ms max. (Can be set to between 0 and 32 in the Setup.) * Number of Circuits 64 (16 points/common, 4 circuits) Number of Simultaneously ON Points 50% (16 points/common) simultaneously ON (at 24 VDC) (Refer to the following illustrations.) Insulation Resistance 20 MΩ min. between external terminals and the GR terminal (100 VDC) Dielectric Strength 1,000 VAC between the external terminals and the GR terminal for 1 minute at a leakage current of 10 mA max. Internal Current Consumption 90 mA max. Weight 110 g max. Accessories None Circuit Configuration
  • The signal names of the terminals are the device variable names. The device variable names are the names that use "Jxx" as the device name. External connection and terminal-device variable diagram CN1 CN2
  • The input power polarity can be connected in either direction.
  • Be sure to wire both pins A9 and A18 (COM0) of CN1, and set the same polarity for both pins.
  • Be sure to wire both pins B9 and B18 (COM1) of CN1, and set the same polarity for both pins. The signal names of the terminals are the device variable names. The device variable names are the names that use "Jxx" as the device name.
  • The input power polarity can be connected in either direction.
  • Be sure to wire both pins A9 and A18 (COM2) of CN2, and set the same polarity for both pins.
  • Be sure to wire both pins B9 and B18 (COM3) of CN2, and set the same polarity for both pins. The signal names of the terminals are the device variable names. The device variable names are the names that use "Jxx" as the device name. 5.6 kΩ 1000 pF 560 Ω 5.6 kΩ Input indicator Indicator switching circuit Internal circuits Internal circuits 1000 pF 560 Ω Wd m+1 Wd m Wd m+2 Wd m+3 Allocated CIO word Signal name Connector row A Connector row B Connector row A Connector row B SW CN1 Jxx_Ch1_In00 Jxx_Ch1_In15 COM0 Jxx_Ch2_In00 Jxx_Ch2_In15 COM0 COM1 COM1 Jxx_Ch3_In00 Jxx_Ch3_In15 COM2 Jxx_Ch4_In00 Jxx_Ch4_In15 COM2 COM3 COM3 CN2 to to to to 0 1 02 0 3 0 4 05 0 6 0 Ambient Temperature 8 points/common (total: 26 points max.) at 55°C 8 points/common at 55°C 12 points/common (total: 45 points) at 55°C Input voltage:

20.4 VDC

Input voltage: Input voltage: Number of simultaneously ON points Number of Simultaneously ON Points vs. Ambient Temperature Characteristic 64 points at 25°C 64 points at 47°C (°C) 64 points at 35°C VDC Wd m+1 Wd m Wd m VDC Wd m+1 Signal name Signal name Connec- tor pin Allocated CIO word Allocated CIO word COM0 COM0 NC NC COM1 COM1 NC NC Jxx_Ch1_In07 Jxx_Ch1_In06 Jxx_Ch1_In05 Jxx_Ch1_In04 Jxx_Ch1_In03 Jxx_Ch1_In02 Jxx_Ch1_In01 Jxx_Ch1_In00 Jxx_Ch2_In07 Jxx_Ch2_In06 Jxx_Ch2_In05 Jxx_Ch2_In04 Jxx_Ch2_In03 Jxx_Ch2_In02 Jxx_Ch2_In01 Jxx_Ch2_In00 Jxx_Ch1_In15 Jxx_Ch1_In14 Jxx_Ch1_In13 Jxx_Ch1_In12 Jxx_Ch1_In11 Jxx_Ch1_In10 Jxx_Ch1_In09 Jxx_Ch1_In08 Jxx_Ch2_In15 Jxx_Ch2_In14 Jxx_Ch2_In13 Jxx_Ch2_In12 Jxx_Ch2_In11 Jxx_Ch2_In10 Jxx_Ch2_In09 Jxx_Ch2_In08 A20 A19 A18 A17 A16 A15 A14 A13 A12 A11 A10 B20 B19 B18 B17 B16 B15 B14 B13 B12 B11 B10 Wd m+2 VDC Wd m+2 24 VDC Wd m+3 Wd m+3 Signal name Signal name Connec- tor pin Allocated CIO word Allocated CIO word COM3 COM3 NC NC COM2 COM2 NC NC Jxx_Ch3 _In08 Jxx_Ch3_In09 Jxx_Ch3_In10 Jxx_Ch3_In11 Jxx_Ch3_In12 Jxx_Ch3_In13 Jxx_Ch3_In14 Jxx_Ch3_In15 Jxx_Ch4_In08 Jxx_Ch4_In09 Jxx_Ch4_In10 Jxx_Ch4_In11 Jxx_Ch4_In12 Jxx_Ch4_In13 Jxx_Ch4_In14 Jxx_Ch4_In15 Jxx_Ch3_In00 Jxx_Ch3_In01 Jxx_Ch3_In02 Jxx_Ch3_In03 Jxx_Ch3_In04 Jxx_Ch3_In05 Jxx_Ch3_In06 Jxx_Ch3_In07 Jxx_Ch4_In00 Jxx_Ch4_In01 Jxx_Ch4_In02 Jxx_Ch4_In03 Jxx_Ch4_In04 Jxx_Ch4_In05 Jxx_Ch4_In06 Jxx_Ch4_In07 B10 B11 B12 B13 B14 B15 B16 B17 B18 B19 B20 A10 A11 A12 A13 A14 A15 A16 A17 A18 A19 A20

CJ1W-ID262 DC Input Unit (24 VDC, 64 Points) * The ON response time will be 120 μs maximum and OFF response time will be 400 μs maximum even if the response times are set to 0 ms due to internal element delays. Note: Observe the following restrictions when connecting to a 2-wire sensor.

  • Make sure the input power supply voltage is larger than the ON voltage (19 V) plus the residual voltage of the sensor (approx. 3 V).
  • Use a sensor with a minimum load current of 3 mA min.
  • Connect bleeder resistance if you connect a sensor with a minimum load current of 5 mA or higher. Name 64-point DC Input Unit with MIL Connector Model CJ1W-ID262 Rated Input Voltage 24 VDC Rated Input Voltage Range 20.4 to 26.4 VDC Input Impedance 5.6 kΩ Input Current 4.1 mA typical (at 24 VDC) ON Voltage/ON Current 19.0 VDC min./3 mA min. OFF Voltage/OFF Current 5 VDC max./1 mA max. ON Response Time 8.0 ms max. (Can be set to between 0 and 32 in the Setup.) * OFF Response Time 8.0 ms max. (Can be set to between 0 and 32 in the Setup.) * Number of Circuits 64 (16 points/common, 4 circuits) Number of Simultaneously ON Points 50% (8 points/common) simultaneously ON (at 24 VDC) (Refer to the following illustrations.) Insulation Resistance 20 MΩ min. between external terminals and the GR terminal (100 VDC) Dielectric Strength 1,000 VAC between the external terminals and the GR terminal for 1 minute at a leakage current of 10 mA max. Internal Current Consumption 90 mA max. Weight 110 g max. Accessories None Circuit Configuration
  • The signal names of the terminals are the device variable names. The device variable names are the names that use "Jxx" as the device name. External connection and terminal-device variable diagram CN1 CN2
  • The input power polarity can be connected in either direction.
  • Be sure to wire both pins 23 and 24 (COM0) of CN1, and set the same polarity for both pins.
  • Be sure to wire both pins 3 and 4 (COM1) of CN1, and set the same polarity for both pins. The signal names of the terminals are the device variable names. The device variable names are the names that use "Jxx" as the device name.
  • The input power polarity can be connected in either direction.
  • Be sure to wire both pins 23 and 24 (COM2) of CN2, and set the same polarity for both pins.
  • Be sure to wire both pins 3 and 4 (COM3) of CN2, and set the same polarity for both pins. The signal names of the terminals are the device variable names. The device variable names are the names that use "Jxx" as the device name. to to to to Input indicator Indicator switching circuit Internal circuits Internal circuits Wd m+1 Wd m Wd m+2 Wd m+3 Allocated CIO word Signal name Jxx_Ch1_In00 Jxx_Ch1_In15 COM0 SWJxx_Ch2_In00 Jxx_Ch2_In15 CN1 COM0 COM1 COM1 Jxx_Ch3_In00 Jxx_Ch3_In15 COM2 Jxx_Ch4_In00 Jxx_Ch4_In15 COM2 COM3 COM3 560 Ω560 Ω 1000pF1000pF 5.6 kΩ 5.6 kΩ CN2 0 1 02 0 3 0 4 05 0 6 0 Ambient Temperature 8 points/common (total: 26 points max.) at 55°C 8 points/common at 55°C 12 points/common (total: 45 points) at 55°C Input voltage:

Input voltage: Input voltage: Number of simultaneously ON points Number of Simultaneously ON Points vs. Ambient Temperature Characteristic 64 points at 47°C 64 points at 35°C64 points at 25°C (°C) Jxx_Ch1_In00 Jxx_Ch1_In01 Jxx_Ch1_In02 Jxx_Ch1_In03 Jxx_Ch1_In04 Jxx_Ch1_In05 Jxx_Ch1_In06 Jxx_Ch1_In07 Jxx_Ch2_In00 Jxx_Ch2_In01 Jxx_Ch2_In02 Jxx_Ch2_In03 Jxx_Ch2_In04 Jxx_Ch2_In05 Jxx_Ch2_In06 Jxx_Ch2_In07 Jxx_Ch2_In08 Jxx_Ch2_In09 Jxx_Ch2_In10 Jxx_Ch2_In11 Jxx_Ch2_In12 Jxx_Ch2_In13 Jxx_Ch2_In14 Jxx_Ch2_In15 Jxx_Ch1_In08 Jxx_Ch1_In09 Jxx_Ch1_In10 Jxx_Ch1_In11 Jxx_Ch1_In12 Jxx_Ch1_In13 Jxx_Ch1_In14 Jxx_Ch1_In15 Wd m+3 Wd m+3 Wd m+2 Wd m+2 Jxx_Ch3_In15 Jxx_Ch3_In14 Jxx_Ch3_In13 Jxx_Ch3_In12 Jxx_Ch3_In11 Jxx_Ch3_In10 Jxx_Ch3_In09 Jxx_Ch3_In08 Jxx_Ch4_In15 Jxx_Ch4_In14 Jxx_Ch4_In13 Jxx_Ch4_In12 Jxx_Ch4_In11 Jxx_Ch4_In10 Jxx_Ch4_In09 Jxx_Ch4_In08 Jxx_Ch4_In07 Jxx_Ch4_In06 Jxx_Ch4_In05 Jxx_Ch4_In04 Jxx_Ch4_In03 Jxx_Ch4_In02 Jxx_Ch4_In01 Jxx_Ch4_In00 Jxx_Ch3_In07 Jxx_Ch3_In06 Jxx_Ch3_In05 Jxx_Ch3_In04 Jxx_Ch3_In03 Jxx_Ch3_In02 Jxx_Ch3_In01 Jxx_Ch3_In00 NC

CJ1W-IA201 AC Input Unit (200 VAC, 8 Points) *1. Can be set to 0 ms, 0.5 ms, 1 ms, 2 ms, 4 ms, 8 ms, 16 ms, or 32ms in the settings. When the response times have been set to 0 ms, the ON response time will be 10 ms maximum and the OFF response time will be 55 ms maximum due to internal element delays. *2. Terminal numbers A0 to A8 and B0 to B8 are used in the external connection and terminal-device variable diagrams. They are not printed on the Units. Note: Although 16 I/O bits (1 word) are allocated, only 8 of these can be used for external I/O. Name 8-point AC Input Unit with Terminal Block Model CJ1W-IA201 Rated Input Voltage 200 to 240 VAC 50/60 Hz Rated Input Voltage Range 170 to 264 VAC Input Impedance 21 kΩ (50 Hz), 18 kΩ (60 Hz) Input Current 9 mA typical (at 200 VAC, 50 Hz), 11 mA typical (at 200 VAC, 60 Hz) ON Voltage/ON Current 120 VAC min./4 mA min. OFF Voltage/OFF Current 40 VAC max./2 mA max. ON Response Time 18.0 ms max. (default setting: 8 ms) *1 OFF Response Time 48.0 ms max. (default setting: 8 ms) *1 Number of Circuits 8 (8 points/common, 1 circuit) Number of Simultaneously ON Points 100% (8 points/common) simultaneously ON Insulation Resistance 20 MΩ min. between external terminals and the GR terminal (500 VDC) Dielectric Strength 2,000 VAC between the external terminals and the GR terminal for 1 minute at a leakage current of 10 mA max. Internal Current Consumption 80 mA max. Weight 130 g max. Accessories None Circuit Configuration

  • The signal names of the terminals are the device variable names. The device variable names are the names that use "Jxx" as the device name. External connection and terminal-device variable diagram
  • The signal names of the terminals are the device variable names. The device variable names are the names that use "Jxx" as the device name. 820 Ω 1 MΩ 0.15 μF 220 Ω Input indicator Internal circuits to Signal name COM Jxx_Ch1_In00 Jxx_Ch1_In07 200 to 240 VAC Signal name Connec- tor pin Jxx_Ch1_In00 Jxx_Ch1_In01 Jxx_Ch1_In02 Jxx_Ch1_In03 Jxx_Ch1_In05 Jxx_Ch1_In06 Jxx_Ch1_In07 Jxx_Ch1_In04 A8 COM NC NC NC NC NC NC NC NC NC

CJ1W-IA111 AC Input Unit (100 VAC, 16 points) *1. Can be set to 0 ms, 0.5 ms, 1 ms, 2 ms, 4 ms, 8 ms, 16 ms, or 32ms in the settings. When the response times have been set to 0 ms, the ON response time will be 10 ms maximum and the OFF response time will be 55 ms maximum due to internal element delays. *2. Use an input voltage of 90 VAC or higher when connecting 2-wire sensors. *3. Terminal numbers A0 to A8 and B0 to B8 are used in the external connection and terminal-device variable diagrams. They are not printed on the Units. Name 16-point AC Input Unit with Terminal Block Model CJ1W-IA111 Rated input voltage 100 to 120 VAC 50/60 Hz *2 Rated Input Voltage Range 85 to 132 VAC Input Impedance 14.5 kΩ (50 Hz), 12 kΩ (60 Hz) Input Current 7 mA typical (at 100 VAC, 50 Hz), 8 mA typical (at 100 VAC, 60 Hz) ON Voltage/ON Current 70 VAC min./4 mA min OFF Voltage/OFF Current 20 VAC max./2 mA max ON Response Time 18 ms max. (default setting: 8 ms) *1 OFF Response Time 48 ms max. (default setting: 8 ms) *1 Number of Circuits 16 (16 points/common, 1 circuit) Number of Inputs ON Simultaneously 100% simultaneously ON (16 points/common) Insulation Resistance 20 MΩ min. between external terminals and the GR terminal (500 VDC) Dielectric Strength 2,000 VAC between the external terminals and the GR terminal for 1 minute at a leakage current of 10 mA max. Internal Current Consumption 90 mA max. Weight 130 g max. Accessories None Circuit Layout

  • The signal names of the terminals are the device variable names. The device variable names are the names that use "Jxx" as the device name. External connection and terminal-device variable diagram
  • The signal names of the terminals are the device variable names. The device variable names are the names that use "Jxx" as the device name. 470 Ω 1 MΩ 0.22 μF 270 Ω Input indicator Internal circuits to Signal name COM Jxx_Ch1_In00 Jxx_Ch1_In15 100 to 120 VAC Signal name Signal name Connec- tor pin COM COM Jxx_Ch1_In00 Jxx_Ch1_In02 Jxx_Ch1_In04 Jxx_Ch1_In06 Jxx_Ch1_In08 Jxx_Ch1_In10 Jxx_Ch1_In12 Jxx_Ch1_In14 Jxx_Ch1_In01 Jxx_Ch1_In03 Jxx_Ch1_In05 Jxx_Ch1_In07 Jxx_Ch1_In09 Jxx_Ch1_In11 Jxx_Ch1_In13 Jxx_Ch1_In15

Bit Allocations for Input Unit 8-point Input Unit 16-point Input Unit 32-point Input Unit 64-point Input Unit Allocated CIO word Signal name (CJ/NJ) CIO Bit Wd m (Input)

00 IN0/Jxx_Ch1_In00

01 IN1/Jxx_Ch1_In01

06 IN6/Jxx_Ch1_In06

07 IN7/Jxx_Ch1_In07

08 − 09 − 14 − 15 − Allocated CIO word Signal name (CJ/NJ) CIO Bit Wd m (Input)

14 IN14/Jxx_Ch1_In14

15 IN15/Jxx_Ch1_In15

Signal name (CJ/NJ) CIO Bit Wd m (Input) (Input)

00 IN0/Jxx_Ch2_In00

01 IN1/Jxx_Ch2_In01

14 IN14/Jxx_Ch2_In14

15 IN15/Jxx_Ch2_In15

Signal name (CJ/NJ) CIO Bit Wd m (Input) (Input) (Input)

00 IN0/Jxx_Ch3_In00

01 IN1/Jxx_Ch3_In01

14 IN14/Jxx_Ch3_In14

15 IN15/Jxx_Ch3_In15

(Input)

00 IN0/Jxx_Ch4_In00

01 IN1/Jxx_Ch4_In01

14 IN14/Jxx_Ch4_In14

15 IN15/Jxx_Ch4_In15

8-point/16-point Units (18-point Terminal Blocks) 32-point Units (Models with 40-point Fujitsu Connector or MIL Connector) ERR 0 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 Connector Connect to the connector on the next Unit. I/O indicators Model number label Terminal block for I/O wiring, 18P × 1 ID231 ID232 1 2 0 1 2 3 4 5 6 7 8 9 12 13 14 15 10 11 ERR Model number I/O indicators Unit with MIL ConnectorUnit with Fujitsu-compatible Connector Connector Connected to the connector on the next Unit. Indicator Switch Changes the 16 I/O displayed on the I/O indicators. Word m or m+1 I/O wiring connector (40-pin × 1) Wd m (Row A on connector) Fujitsu connector MIL connector Bottom of connector Top of connectorWd m+1 (Row B on connector) Setting 1 Setting 2

64-point Units (Models with Two 40-point Fujitsu Connectors or MIL Connector) Wiring Basic I/O Units with Terminal Blocks Electric Wires The following wire gauges are recommended. Crimp terminals Use crimp terminals (M3) having the dimensions shown below. Terminal Block Connector Wire Size 18-terminal AWG 22 to 18 (0.32 to 0.82 mm2) ID261 0 1 2 3 4 5 6 7 8 9 12 13 14 1510 11 0 1 2 3 4 5 6 7 8 9 12 13 14 15 10 11 I II ID261 1 2 Model number I/O indicators Unit with MIL ConnectorUnit with Fujitsu-compatible Connector Connector Connected to the connector on the next Unit. Indicator Switch Changes the 32 I/O displayed on the I/O indicators. Setting 1 Setting 2 I/O wiring connector (40-pin × 2) Wd m and m+1: CN1 Wd m+2 and m+3: CN2 Word m or m+2 Word m+1 or m+3 6.2 mm max. 6.2 mm max.

An I/O Unit can be connected to an external device by any of the following three methods. 1. User-provided Cable An I/O Unit can be directly connected to an external device by using a connector. 2. Connector-Terminal Block Conversion Unit Use a Connecting Cable to connect to a Connector-Terminal Block Conversion Unit. Converting the I/O Unit connector to a screw terminal block or push-in terminal block makes it easy to connect external devices. 3. I/O Relay Terminal Use a Connecting Cable to connect to an I/O Relay Terminal. The I/O specifications can be converted to relay outputs and AC inputs by connecting the I/O Relay Terminal to an I/O Unit. B C A A User-provided cable B External device C Connector B C A A Connecting Cable for Connector-Terminal Block Conversion Unit XW2Z B Connector-Terminal Block Conversion Unit XW2R C Conversion to a screw terminal block B B A A Connecting Cable for I/O Relay Terminals XW2Z-R B I/O Relay Terminals G70V, G7TC Relay Terminals G70D, G70R I/O Terminal Socket G70A Or, conversion to relay outputs and AC inputs.

  1. Using User-made Cables with Connector Available Connectors Use the following connectors when assembling a connector and cable. 32- and 64-point Basic I/O Units with Fujitsu-compatible Connectors Applicable Units Applicable Cable-side Connectors 32- and 64-point Basic I/O Units with MIL Connectors Applicable Units Applicable Cable-side Connectors *1. Socket and Stain Relief set. *2. Crimp Contacts (XG5W- 0232) are sold separately. *3. Applicable wire size is AWG 28 to 24. For applicable conductor construction and more information, visit the OMRON website at www.ia.omron.com. Wire Size Crimping Tools The following models are recommended for crimping tools and pressure-welding tools for Fujitsu connectors. Tools for Crimped Connectors (Fujitsu Component) Tools for Pressure-welded Connectors (Fujitsu Component) The following models are recommended for tools for OMRON MIL connectors. Tools for Pressure-welded Connectors (OMRON) Tools for Crimped Connectors (OMRON) Model Specifications Pins CJ1W-ID231 Input Unit, 24 VDC, 32 inputs CJ1W-ID261 Input Unit, 24 VDC, 64 inputs Connection Pins OMRON set Fujitsu parts Solder-type 40 C500-CE404 Socket: FCN-361J040-AU Connector cover: FCN-360C040-J2 Crimped 40 C500-CE405 Socket: FCN-363J040 Connector cover: FCN-360C040-J2 Contacts: FCN-363J-AU Pressure-welded 40 C500-CE403 FCN-367J040-AU/F Model Specifications Pins CJ1W-ID232 CJ1W-ID233 Input Unit, 24 VDC, 32 inputs CJ1W-ID262 Input Unit, 24 VDC, 64 inputs Connection Pins OMRON set DDK parts Pressure-welded 40 XG4M-4030-T *1 FRC5-A040-3T0S Crimped

40 XG5N-401 *2 HU-40OS2-001

Crimp Contacts for XG5N *3 XG5W-0232 (loose contacts: 100 pieces) XG5W-0232-R (reel contacts: 10,000 pieces) HU-111S Product Name Model Hand Crimping Tool FCN-363T-T005/H Contact Withdrawal Tool FCN-360T-T001/H Product Name Model Hand Press FCN-707T-T101/H Cable Cutter FCN-707T-T001/H Locator Plate FCN-367T-T012/H Product Name Model Pressure-welding Tool XY2B-0002 Attachment XY2B-1007 Product Name Model Manual Crimping Tool XY2B-7007

  1. Connecting Connector-Terminal Block Conversion Units Connection Patterns for Connector-Terminal Block Conversion Units Combination of I/O Units with Connector-Terminal Block Conversion Units * The box @ is replaced by the cable length. Note: For details, refer to the XW2R series catalog (Cat. No. G077). Pattern Configuration A B Unit I/O capacity Number of connectors Polarity Connection pattern Connecting Cable * Connector-Terminal Block Conversion Unit Wiring method Common terminals CJ1W-ID231 32 inputs 1 Fujitsu connector NPN/PNP A XW2Z-@@@PF XW2R-J34GD-C1 Phillips screw NoXW2R-E34GD-C1 Slotted screw (rise up) XW2R-P34GD-C1 Push-in spring CJ1W-ID232 32 inputs 1 MIL connector NPN/PNP A XW2Z-@@@PM XW2R-J34GD-C2 Phillips screw NoXW2R-E34GD-C2 Slotted screw (rise up) XW2R-P34GD-C2 Push-in spring CJ1W-ID233 32 inputs 1 MIL connector NPN/PNP A XW2Z-@@@PM XW2R-J34GD-C2 Phillips screw NoXW2R-E34GD-C2 Slotted screw (rise up) XW2R-P34GD-C2 Push-in spring CJ1W-ID261 64 inputs 2 Fujitsu connectors NPN/PNP B XW2Z-@@@PF (2 pcs) XW2R-J34GD-C1 (2 Units) Phillips screw NoXW2R-E34GD-C1 (2 Units) Slotted screw (rise up) XW2R-P34GD-C1 (2 Units) Push-in spring CJ1W-ID262 64 inputs 2 MIL connectors NPN/PNP B XW2Z-@@@PM (2 pcs) XW2R-J34GD-C2 (2 Units) Phillips screw NoXW2R-E34GD-C2 (2 Units) Slotted screw (rise up) XW2R-P34GD-C2 (2 Units) Push-in spring Connecting Cable Connector-Terminal Block Conversion Unit 34 terminals Connecting Cable Connector-Terminal Block Conversion Unit 34 terminals 34 terminals
  1. Connecting I/O Relay Terminals Connection Patterns for I/O Relay Terminals Combination of I/O Units with I/O Relay Terminals and Connecting Cables *1. The box @ is replaced by the cable length. *2. Either NPN inputs or PNP inputs can be used. *3. G70A-ZIM16-5 is a I/O terminal socket prod ucts. Relay is not provided with the socket. Be sure to order a relay, timer separetely. (with G2R Relays mounted: SPDT × 16) Pattern Configuration A B I/O Units Connection pattern Connecting Cables I/O Relay Terminals Model I/O capacity External connectors Polarity Model *1 Quantity required Model I/O points Quantity required Wiring method CJ1W-ID231 32 inputs

1 Fujitsu

(40 p) Sinking/ Sourcing (NPN/PNP) AX W2Z-RI@C-@ 1 G70V-SID16P(-1)(-C16) *2 16 Push-in spring G7TC-ID/IA16 16 Screw terminal G70A-ZIM16-5 *3 16 CJ1W-ID232 32 inputs

1 MIL

(40 p) Sinking/ Sourcing (NPN/PNP) A XW2Z-RO@-@-D1 1 G70V-SID16P(-1)(-C16) *2 16 Push-in spring G7TC-ID/IA16 16 Screw terminal G70A-ZIM16-5 16 CJ1W-ID233 32 inputs (40 p) Sinking/ Sourcing (NPN/PNP) A XW2Z-RO@-@-D1 1 G70V-SID16P(-1)(-C16) *2 16 Push-in spring G7TC-ID/IA16 16 Screw terminal G70A-ZIM16-5*3 16 CJ1W-ID261 64 inputs

2 Fujitsu

(40 p) Sinking/ Sourcing (NPN/PNP) BX W2Z-RI@C-@ 2 G70V-SID16P(-1)(-C16) *2 16 Push-in spring G7TC-ID/IA16 16 Screw terminal G70A-ZIM16-5 *3 16 CJ1W-ID262 64 inputs

2 MIL

(40 p) Sinking/ Sourcing (NPN/PNP) B XW2Z-RO@-@-D1 2 G70V-SID16P(-1)(-C16) *2 16 Push-in spring G7TC-ID/IA16 16 Screw terminal G70A-ZIM16-5 *3 16 Connecting Cable I/O Relay Terminal Connecting Cable I/O Relay Terminal I/O Relay Terminal

Dimensions (Unit: mm) 8-point/16-point Units (18-point Terminal Blocks) CJ1W-ID201 CJ1W-ID211 CJ1W-ID212 CJ1W-IA201 CJ1W-IA111 32-point Units (Input Units) With Fujitsu-compatible Connector (40-pin × 1) CJ1W-ID231 With MIL Connector (40-pin × 1) CJ1W-ID232 CJ1W-ID233 ID211 0123 456 7 89 10 11 12 13 14 15 DC24V 7mA COM COM 2.7902.7 31 ID231 AB 123 4567 89 10 1112 13 14 15 DC24V 4.1mA 66.5 (112.5) 2.790 2.7 ID231 0 1 1ch 0ch 123 4567 89 10 1112 13 14 15 DC24V 4.1mA 83.6 2.790 2.7

64-point Units (Input Units) With Fujitsu-compatible Connector (40-pin × 2) CJ1W-ID261 With MIL Connector (40-pin × 2) CJ1W-ID262 Related Manuals Name Cat. No. Contents CJ-series CJ2 CPU Unit Hardware User’s Manual CJ2H-CPU6@-EIP CJ2H-CPU6@ CJ2M-CPU@@ W472 Describes the following for CJ2 CPU Units:

  • Overview and features
  • Basic system configuration
  • Part nomenclature and functions
  • Mounting and setting procedure
  • Remedies for errors
  • Also refer to the Software User’s Manual (W473). SYSMAC CJ Series CJ1H-CPU@@H-R, CJ1G/H-CPU@@H, CJ1G-CPU@@P, CJ1G-CPU@@, CJ1M-CPU@@ Programmable Controllers Operation Manual W393 Provides an outlines of and describes the design, installation, maintenance, and other basic operations for the CJ-series PLCs. NJ-series CPU Unit Hardware User's Manual NJ501-@@@@ W500 An introduction to the entire NJ-series system is provided along with the following information on a Controller built with an NJ501 CPU Unit.
  • Features and system configuration
  • Introduction
  • Part names and functions
  • General specifications
  • Installation and wiring
  • Maintenance and inspection Use this manual together with the NJ-series CPU Unit Software User's Manual (Cat. No. W501). 66.5 (112.5) 90 2.72.7 83.6 90 2.7 2.7

Terms and Conditions Agreement Read and understand this catalog. Please read and understand this catalog before purchasing the products. Please consult your OMRON representative if you have any questions or comments. Warranties. (a) Exclusive Warranty. Omron’s exclusive warranty is that the Products will be free from defects in materials and workmanship for a period of twelve months from the date of sale by Omron (or such other period expressed in writing by Omron). Omron disclaims all other warranties, express or implied. (b) Limitations. OMRON MAKES NO WARRANTY OR REPRESENTATION, EXPRESS OR IMPLIED, ABOUT NON-INFRINGEMENT , MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE OF THE PRODUCTS. BUYER ACKNOWLEDGES THAT IT ALONE HAS DETERMINED THAT THE PRODUCTS WILL SUITABLY MEET THE REQUIREMENTS OF THEIR INTENDED USE. Omron further disclaims all warranties and responsibility of any type for claims or expenses based on infringement by the Products or otherwise of any intellectual property right. (c) Buyer Re medy. Omron’s sole obligation hereunder shall be, at Omron’s election, to (i) replace (in the form originally shipped with Buyer responsible for labor charges for removal or replacement thereof) the non-complying Product, (ii) repair the non-complying Product, or (iii) repay or credit Buyer an amount equal to the purchase price of the non-complying Product; provided that in no event shall Omron be responsible for warranty, repair, indemnity or any other claims or expenses regarding the Products unless Omron’s analysis confirms that the Products were properly handled, stored, installed and maintained and not subject to contamination, abuse, misuse or inappropriate modification. Return of any Products by Buyer must be approved in writing by Omron before shipment. Omron Companies shall not be liable for the suitability or unsuitability or the results from the use of Products in combination with any electrical or electronic components, circuits, system assemblies or any other materials or substances or environmen ts. Any advice, recommendations or information given orally or in writing, are not to be construed as an amendment or addition to the above warranty. See http://www.omron.com/global/ or contact your Omron representative for published information. Limitation on Liability; Etc. OMRON COMPANIES SHALL NOT BE LIABLE FOR SPECIAL, INDIRECT , INCIDENTAL, OR CONSEQUENTIAL DAMAGES, LOSS OF PROFITS OR PRODUCTION OR COMMERCIAL LOSS IN ANY WAY CONNECTED WITH THE PRODUCTS, WHETHER SUCH CLAIM IS BASED IN CONTRACT , WARRANTY , NEGLIGENCE OR STRICT LIABILITY . Further, in no event shall liability of Omron Companies exceed the individual price of the Product on which liability is asserted. Suitability of Use. Omron Companies shall no t be responsible for conformity with any standards, codes or regulations which apply to the combination of the Product in the Buyer’s application or use of the Product. At Buyer’s request, Omron will provide applicable third party certification documents identifying ratings and limitations of use which apply to the Product. This information by itself is not sufficient for a complete determination of the suitability of the Product in combination with the end product, machine , system, or other application or use. Buyer shall be solely responsible for determining appropriateness of the particular Product with respect to Buyer’s application, product or system. Buyer shall take application responsibility in all cases. NEVER USE THE PRODUCT FOR AN APPLICATION INVOLVING SERIOUS RISK TO LIFE OR PROPERTY OR IN LARGE QUANTITIES WITHOUT ENSURING THAT THE SYSTEM AS A WHOLE HAS BEEN DESIGNED TO ADDRESS THE RISKS, AND THAT THE OMRON PRODUCT(S) IS PROPERLY RATED AND INSTALLED FOR THE INTENDED USE WITHIN THE OVERALL EQUIPMENT OR SYSTEM. Programmable Products. Omron Companies shall not be responsible for the user’s programming of a programmable Product, or any consequence thereof. Performance Data. Data presented in Omron Company websites, catalogs and other materials is provided as a guide for the user in determining suitability and does not constitute a warranty. It may represent the result of Omron’s test conditions, and the user must correlate it to actual application requirements. Actual performance is subject to the Omron’s Warranty and Limitations of Liability. Change in Specifications. Product specifications and accessories may be changed at any time based on improvements and other reasons. It is our practice to change part numbers when published ratings or features are changed, or when significant construction changes are made. However, some specifications of the Product may be changed without any notice. When in doubt, special part numbers may be assigned to fix or establish key specifications for your application. Please consult with your Omron’s representative at any time to confirm actual specifications of purchased Product. Errors and Omissions. Information presented by Omron Companies has been checked and is believed to be accurate; however, no responsibility is assumed for clerical, typographical or proofreading errors or omissions. 2019.3 In the interest of product improvement, specifications are subject to change without notice. OMRON Corporation Industrial Automation Company http://www.ia.omron.com/ (c)Copyright OMRON Corporation 2019 All Right Reserved.