G6ZU-1PE-A

G6Z OMRON | Alldatasheet

Document overview

• Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
• PDF pages: 18

Technical content

High-frequency Relay G6Z 341 High-frequency Relay G6Z Miniature 2.6-GHz-Band, SPDT, High-frequency Relay

• Superior high-frequency characteristics include an isolation of 1.5 max. at 2.6 GHz.  Triplate micro stripline technology assures superior high-frequency characteristics.  Miniature dimensions of 20 x 8.6 x 8.9 mm (L x W x H).  E-shape or Y -shape terminal options with reverse contact arrangements available, allows greater freedom with PCB design.  Choose between 75-Ω or 50-Ω impedance models  RoHS Compliant.

Ordering Information

Model Number Legend: Classification Structure Contact form Terminal arrangement Characteristic impedance Rated coil voltage Model Through-hole Surface Mount Non-latching Fully sealed SPDT E-shape 75 Ω 3, 4.5, 5, 9, 12, and 24 VDC G6Z-1PE G6Z-1FE 50 Ω G6Z-1PE-A G6Z-1FE-A Y -shape 75 Ω G6Z-1P G6Z-1F 50 Ω G6Z-1P-A G6Z-1F-A Single coil latching E-shape 75 Ω G6ZU-1PE G6ZU-1FE 50 Ω G6ZU-1PE-A G6ZU-1FE-A Y -shape 75 Ω G6ZU-1P G6ZU-1F 50 Ω G6ZU-1P-A G6ZU-1F-A Dual coil latching E-shape 75 Ω G6ZK-1PE G6ZK-1FE 50 Ω G6ZK-1PE-A G6ZK-1FE-A Y -shape 75 Ω G6ZK-1P G6ZK-1F 50 Ω G6ZK-1P-A G6ZK-1F-A Rated coil voltage Notes: 1. When ordering, add the rated coil voltage to the model number. Example: G6Z-1PE-A-DC12 2. When ordering tape packing (surface mount models), add "-TR" to the model number. Example: G6ZU-1FE-TR-DC12 "-TR" is not part of the relay model number. Therefore, it is not marked on the relay case. Tape packing 1. Relay Function None: Non-latching U: Single coil latching K: Dual coil latching 2. Contact Form 1: SPDT 3. Terminal Shape P: PCB through-hole terminals F: Surface mount terminals 4. Terminal Structure None: Y -shape terminal E: E-shape terminal None: 75 Ω A: 50 Ω 5. Characteristic Impedance 6. Contact arrangement None: Standard contact arrangement R: Reverse contact arrangement 7. Rated Coil Voltage G6Z - - - DC 2 3 4 5 6 71

342 High-frequency Relay G6Z

These Relays can be used for switching signals in media equipment.

• Wire communications: Cable TV (STB and broadcasting infrastructure), cable modems, and VRS (video response systems)  Wireless communications: Transceivers, ham radios, ETC, ITS, high-level TV, satellite broadcasting, text multiplex broadcasting, mobile phone stations, TV broadcasting facilities, community antenna systems and car navigation systems  Entertainment equipment: TVs, video games, satellite radio units,  Industrial equipment: Measuring equipment, test equipment, and multiplex transmission devices Specifications ■Contact Ratings ■High-frequency Characteristics Note: 1. The above values are initial values. Load type Resistive load Contact Material Au clad Cu alloy Rated load 10 mA at 30 VAC; 10 mA at 30 VDC; 10 W at 900 MHz (See note) Rated carry current 0.5 A Max. switching voltage 30 VAC, 30 VDC Max. switching current 0.5 A Frequency 900 MHz 2.6 GHz Terminal type Through hole Surface mount Through hole Surface mount Terminal structure E-shape Y-shape E-shape Y-shape E-shape Y-shape E-shape Y-shape 50 Ω 60 dB min. Insertion loss (not including substrate loss) 75 Ω 0.2 dB max. 0.5 dB max. 50 Ω 0.1 dB max. 0.3 dB max. 50 Ω 1.1 max. 1.3 max. Return loss 75 Ω 20.8 dB max. 14.0 dB max. 50 Ω 26.4 dB max. 17.7 dB max. Maximum carry power 10 W (See note 2) Maximum switching power 10 W (See note 2)

High-frequency Relay G6Z 343 ■Coil Ratings Non-latching, Standard and Reverse-contact Models G6Z-1P(E), G6Z-1F(E) Single Coil Latching Models G6ZU-1P(E), G6ZU-1F(E) Dual Coil Latching Models G6ZK-1P(E), G6ZK-1F(E) Note: 1. The rated current and coil resistance are measured at a coil temperature of 23°C with a tolerance of ±10%. 2. The operating characteristics are measured at a coil temperature of 23°C. 3. The maximum voltage is the highest voltage that can be imposed on the relay coil instantaneously. 4. The voltage measurements for operate/release and set/reset are the values obtained for instantaneous changes in the voltage (rectangular wave). Rated voltage (VDC) Rated current (mA) Coil resistance (Ω) Must operate voltage (VDC) Must dropout voltage (VDC) Maximum voltage (VDC) Power consumption (mW) 3 66.7 45 75% max. of rated voltage 10% min. of rated voltage 150% of rated voltage Approx. 200 4.5 44.4 101 5 40.0 125 9 22.2 405 12 16.7 720 24 8.3 2,880 Rated voltage (VDC) Rated current (mA) Coil resistance (Ω) Must set voltage (VDC) Must reset voltage (VDC) Maximum voltage (VDC) Power consumption (mW) 3 66.7 45 75% max. of rated voltage 75% max. of rated voltage 150% of rated voltage Approx. 200 4.5 44.4 101 5 40.0 125 9 22.2 405 12 16.7 720 24 8.3 2,880 Rated voltage (VDC) Rated current (mA) Coil resistance (Ω) Must set voltage (VDC) Must reset voltage (VDC) Maximum voltage (VDC) Power consumption (mW) 3 120 25 75% max. of rated voltage 75% max. of rated voltage 150% of rated voltage Approx. 360 4.5 80 56 57 2 6 9 9 40 225 12 30 400 24 15 1,600

344 High-frequency Relay G6Z

Note: 1. The above values are initial values. 2. The contact resistance was measured with 10 mA at 1 VDC with a voltage drop method. 3. Values in parentheses are typical values. 4. The insulation resistance was measured with a 500-VDC megohmmeter applied to the same parts as those used for checking the dielectric strength. Engineering Data Item Non-latching models Single coil latching models Dual coil latching models G6Z-1P(E), G6Z-1F(E) G6ZU-1P(E), G6ZU-1F(E) G6ZK-1P(E), G6ZK-1F(E) Contact resistance (See note 2) 100 mΩ max. Release (reset) time (See note 3) 10 ms max. (approx 2.5 ms) Set/reset time --- 12 ms Insulation resistance (See note 4) 100 MΩ min. (at 500 VDC) Dielectric strength Coil and contacts 1,000 VAC, 50/60 Hz for 1 min. Coil and ground, contacts and ground 500 VAC, 50/60 Hz for 1 min. Contacts of same polarity 500 VAC, 50/60 Hz for 1 min. Vibration resistance Mechanical durability 10 to 55 to 10 Hz, 0.75-mm single amplitude (1.5-mm double amplitude) Malfunction durability 10 to 55 to 10 Hz, 0.75-mm single amplitude (1.5-mm double amplitude) Shock resistance Mechanical durability 1,000 m/s2 Malfunction durability 500 m/s2 Service life Mechanical 1,000,000 operations min. (at 36,000 operations/hour) Electrical 300,000 operations min. (30 VAC, 10 mA/30 VDC, 10 mA), 100,000 operations min. (900 MHz, 10 W) at a switching frequency of 1,800 operations/hour Ambient temperature Operating: -40°C to 70°C (with no icing or condensation) Ambient humidity Operating: 5% to 85% RH Weight Approx. 2.8 g Ambient temperature (°C) −40 −20 250 200 150 100 0 02 0 4 0 6 0 8 0 1 0 0 Maximum voltage (%) G6Z G6ZU G6ZK Ambient temperature (°C) Max. estimated value −60 −40 100 0 0−20 20 40 60 80 100 max. max. avg. min. min. avg. Must operate voltage Must release voltage Z Y X 200 400 600 800 1,000 1,000 1,0001,000 1,000 800 600 400 200 1,000 Shock direction Unit: m/s Sample: G6Z-1P-A 50 Ω

5 VDC

Number of relays: 5 X Not energized Energized Z Y Ambient Temperature vs. Maximum Voltage Ambient Temperature vs. Must Operate or Must Release VoltageOn the basis of rated voltage (%) Sample: G6Z-1P 5 VDC Number of relays: 5 Shock Malfunction Conditions: Shock is applied in ±X, ±Y, and ±Z directions three times each with and without energizing the Relays to check for contact malfunctions.

High-frequency Relay G6Z 345 Note: 1. The tests were conducted at an ambient temperature of 23°C. 2. The contact resistance data are periodically measured reference values and are not values from monitoring each operation. Contact resistance values will vary according to the switching frequency and operating environment, so be sure to check operation under the actual operating conditions before use. Operating frequency (×103 operations) 100 Must operate Must release max. max. min. min. Sample: G6Z-1PE 75 Ω 5 VDC Number of Relays: 5 Test conditions: 10 mA resistive load at 30 VAC Switching frequency: 1,800 operations/h 0.0001 0.001 0.01 0.1 1 10 100 Operating frequency (×103 operations) 100 0.0001 0.001 0.01 0.1 1 10 100 Must operate Must release max. max. min. min. Sample: G6Z-1PE 75 Ω 5 VDC Number of Relays: 5 Test conditions: 10 mA resistive load at 30 VDC Switching frequency: 1,800 operations/h Electrical Endurance (with Must Operate and Must Release Voltage) On the basis of rated voltage (%) Electrical Endurance (with Must Operate and Must Release Voltage)On the basis of rated voltage (%) Operating frequency (×103 operations) 1,000 700 500 300 100 0.001 0.01 0.1 1 10 100 1,000 max.max. min. min. Contact resistance Sample: G6Z-1PE 75 Ω 5 VDC Number of Relays: 5 Test conditions: 10 mA resistive load at 30 VDC Switching frequency: 1,800 operations/h Operating frequency (×103 operations) 1,000 700 500 300 100 0.001 0.01 0.1 1 10 100 1,000 max.max. min. min. Sample: G6Z-1PE 75 Ω 5 VDC Number of Relays: 5 Test conditions: 10 mA resistive load at 30 VAC Switching frequency: 1,800 operations/h Contact resistance NO contact NC contact Contact resistance (mΩ) Electrical Endurance (Contact Resistance) Electrical Endurance (Contact Resistance) Contact resistance (mΩ) NO contact NC contact External magnetic field (A/m) −1,200 −800 −400 0 400 800 1,200 +30 +20 +10 −10 −20 −30 (Average value) Sample: G6Z-1P 5 VDC Number of Relays: 5 Must operate voltage Must release voltage S N External magnetic field (A/m) −1,200 −800 −400 0 400 800 1,200 +30 +20 +10 −10 −20 −30 (Average value) Sample: G6Z-1P 5 VDC Number of Relays: 5 Must operate voltage Must release voltage SN External magnetic field (A/m) −1,200 −800 −400 0 400 800 1,200 Change rate on the basis of initial value (%) +30 +20 +10 −10 −20 −30 (Average value) Sample: G6Z-1P 5 VDC Number of Relays: 5 Must operate voltage Must release voltage External Magnetic Interference Change rate on the basis of initial value (%) Change rate on the basis of initial value (%) S N

346 High-frequency Relay G6Z

Note: 1. The tests were conducted at an ambient temperature of 23°C. 2. High-frequency characteristics depend upon the PCB to which the relay is mounted. Always check these characteristics, including endurance (service life), in the actual machine before use. * Substrate loss removed N.O N.C Sample: G6Z-1PE 75 Ω 5 VDC with terminating resistance Frequency (MHz) 0 500 1,000 1,500 2,000 2,500 3,000 N.O. N.C. (Average value (initial value)) 0.2 0.4 0.6 0.8 1.0 1.7 1.6 1.5 1.4 1.3 1.2 1.1 Frequency (MHz) 0 500 1,000 1,500 2,000 2,500 3,000 N.O. N.C. Sample: G6Z-1PE 75 Ω 5 VDC with terminating resistance (Average value (initial value)) Return loss V.S.W.R. 100 Frequency (MHz) 0 500 1,000 1,500 2,000 2,500 3,000 N.O. N.C. Sample: G6Z-1PE 75 Ω 5 VDC with terminating resistance (Average value (initial value)) High-frequency Characteristics at 75 Ω (Isolation) High-frequency Characteristics at 75 Ω (Insertion Loss) Isolation (dB) Insertion loss (dB) High-frequency Characteristics at 75 Ω (Return Loss, V.S.W.R.)Return loss (dB) V.S.W.R. 0.2 0.4 0.6 0.8 1.0 Frequency (MHz) 0 500 1,000 1,500 2,000 2,500 3,000 N.O. N.C. (Average value (initial value)) Sample: G6Z-1PE-A 50 Ω 5 VDC with terminating resistance * Substrate loss removed 1.7 1.6 1.5 1.4 1.3 1.2 1.1 Frequency (MHz) 0 500 1,000 1,500 2,000 2,500 3,000 N.O. N.C. (Average value (initial value)) Sample: G6Z-1PE-A 50 Ω 5 VDC with terminating resistance Return loss V.S.W.R. 100 Frequency (MHz) 0 500 1,000 1,500 2,000 2,500 3,000 N.O. N.C. (Average value (initial value)) Sample: G6Z-1PE-A 50 Ω 5 VDC with terminating resistance High-frequency Characteristics at 50 Ω (Isolation) High-frequency Characteristics at 50 Ω (Insertion Loss) High-frequency Characteristics at 50 Ω (Return Loss, V.S.W.R.) Isolation (dB) Insertion loss (dB) Return loss (dB) V.S.W.R. Time (ms) 0.5 1.0 1.5 2.0 Must operate bounce time Must release bounce time Sample: G6Z-1P 75 Ω 5 VDC Number of Relays: 32 Must operate Must release time Time (ms) Number of contacts Sample: G6Z-1P 75 Ω 5 VDC Number of Relays: 32 Must Operate and Must Release Time Distribution (See note.) Must Operate and Must Release Bounce Time Distribution (See note.) Number of contacts

High-frequency Relay G6Z 347 Dimensions Note: All units are in millimeters unless otherwise indicated. ■PCB Through-hole Terminal Types 11 10 9 8121314 11 10 9 8121314 +−S −+R 11 10 9 8121314 G6Z-1PE 8.9 3-0.4 6-0.6 2.54 7.62 15.24 8.6 0.2 0.1 8 7.62 Orientation mark Orientation mark G6ZU-1PE Orientation mark G6Z-1PE-R15.24 7.62 2.54 7.62 Six, 1.0-dia. holes Three, 1.6-dia. Six, 1.8-dia. Three, 0.8-dia. holes G6Z-1PE G6Z-1PE-R G6ZU-1PE Mounting Dimensions (Bottom View) Tolerance: ±0.1 mm Terminal Arrangement/Internal Connections (Bottom View) Note: Each value has a tolerance of ±0.3 mm. (Coil terminal) 11 10 9 8121314 +−S −+R 11 10 9 8121314 G6Z-1PE-A G6ZU-1PE-A Orientation mark 8.9 9-0.62.54 7.62 15.24 8.6 0.2 0.1 8 7.62 15.24 7.62 2.54 7.62 Nine, 1.0-dia. holes Nine, 1.8-dia. Orientation mark G6Z-1PE-A G6ZU-1PE-A Mounting Dimensions (Bottom View) Tolerance: ±0.1 mm Terminal Arrangement/Internal Connections (Bottom View) Note: Each value has a tolerance of ±0.3 mm. (Coil terminal)

348 High-frequency Relay G6Z

+−S −+R G6Z-1P 8.9 3-0.4 8-0.6 2.54 7.62 15.24 8.6 0.2 0.1 8 7.62 15.24 7.62 2.54 7.62 Eight, 1.0-dia. holes Three, 1.6-dia. Eight, 1.8-dia. Three, 0.8-dia. holes Orientation mark G6ZU-1P Orientation mark G6Z-1P G6ZU-1P Mounting Dimensions (Bottom View) Tolerance: ±0.1 mm Terminal Arrangement/Internal Connections (Bottom View) Note: Each value has a tolerance of ±0.3 mm. (Coil terminal) 741 10 9 8121314 741 10 9 8121314 +−S −+R 15.24 7.62 2.54 7.62 Eleven, 1.0-dia. holes Eleven, 1.8-dia. Orientation mark Orientation mark 8.9 2.54 11-0.6 7.62 15.24 8.6 0.2 0.1 8 7.62 G6Z-1P-A G6ZU-1P-A G6Z-1P-A G6ZU-1P-A Mounting Dimensions (Bottom View) Tolerance: ±0.1 mm Terminal Arrangement/Internal Connections (Bottom View) Note: Each value has a tolerance of ±0.3 mm. (Coil terminal) 761 11 10 9 8121314 S − + R − + 8.9 3-0.4 7-0.6 2.54 7.62 15.24 8.6 0.2 0.1 8 7.62 15.24 7.62 2.54 7.62 Seven, 1.0-dia. holes Three, 1.6-dia. Seven, 1.8-dia. Three, 0.8-dia. holes Orientation mark G6ZK-1PE Mounting Dimensions (Bottom View) Tolerance: ±0.1 mm Terminal Arrangement/Internal Connections (Bottom View) Note: Each value has a tolerance of ±0.3 mm. (Coil terminal)

High-frequency Relay G6Z 349 761 11 10 9 8121314 S − + R − + 15.24 7.62 2.54 7.62 Ten, 1.0-dia. holes Ten, 1.8-dia. Orientation mark 8.9 2.54 10-0.6 7.62 15.24 8.6 0.2 0.1 8 7.62 G6ZK-1PE-A Mounting Dimensions (Bottom View) Tolerance: ±0.1 mm Terminal Arrangement/Internal Connections (Bottom View) Note: Each value has a tolerance of ±0.3 mm. (Coil terminal) 765431 10 9 8121314 S − + R − + 15.24 7.62 2.54 7.62 Nine, 1.0-dia. holes Three, 1.6-dia. Nine, 1.8-dia. Three, 0.8-dia. holes Orientation mark 8.9 2.54 9-0.6 7.62 15.24 8.6 0.2 0.1 8 7.623-0.4 G6ZK-1P Mounting Dimensions (Bottom View) Tolerance: ±0.1 mm Terminal Arrangement/Internal Connections (Bottom View) Note: Each value has a tolerance of ±0.3 mm. (Coil terminal) 765431 10 9 8121314 S − + R − + 15.24 7.62 2.54 7.62 Twelve, 1.0-dia. holes. Twelve, 1.8-dia. Orientation mark 8.9 2.54 12-0.6 7.62 15.24 8.6 0.2 0.1 8 7.62 G6ZK-1P-A Mounting Dimensions (Bottom View) Tolerance: ±0.1 mm Terminal Arrangement/Internal Connections (Bottom View) Note: Each value has a tolerance of ±0.3 mm. (Coil terminal)

350 High-frequency Relay G6Z

■Surface Mount Terminal Types 1114 12 13 10 8 1 7 − + 1114 12 13 10 8 1 7 +−S −+R G6Z-1FE 9.3 3-0.4 6-0.6 2.54 7.62 15.24 8.6 0.2 0.18 9.6 8.3 2.30.80.8 15.24 7.62 0.8 2.54 Six, 1.1 Orientation mark G6ZU-1FE Orientation mark G6Z-1FE G6ZU-1FE Mounting Dimensions (Top View) Tolerance: ±0.1 mm Terminal Arrangement/Internal Connections (Top View) Note 1: Each value has a tolerance of ±0.3 mm. 2: The coplanarity of the terminals is 0.1 mm max. (Coil terminal) 1114 12 13 10 8 1 7 − + 1114 12 13 10 8 1 7 +−S −+R G6Z-1FE-A G6ZU-1FE-A 9.3 9-0.62.54 7.62 15.24 8.6 0.18 9.6 8.3 2.3 15.24 7.62 Nine, 1.1 Orientation mark Orientation mark 2.54 G6Z-1FE-A G6ZU-1FE-A Mounting Dimensions (Top View) Tolerance: ±0.1 mm Terminal Arrangement/Internal Connections (Top View) Note 1: Each value has a tolerance of ±0.3 mm. 2: The coplanarity of the terminals is 0.1 mm max. 0.2 (Coil terminal) 35 4 14 12 13 10 8 1 7 − + 14 12 13 10 8 1 7 +−S −+R 5 734 G6Z-1F 9.3 8-0.6 2.54 7.62 15.24 8.6 0.18 9.6 3-0.4 8.3 2.30.8 0.8 7.62 15.24 0.8 2.54 Eight, 1.1 Orientation mark G6ZU-1F Orientation mark G6Z-1F G6ZU-1F Mounting Dimensions (Top View) Tolerance: ±0.1 mm Terminal Arrangement/Internal Connections (Top View) Note 1: Each value has a tolerance of ±0.3 mm. 2: The coplanarity of the terminals is 0.1 mm max. 0.2 (Coil terminal)

High-frequency Relay G6Z 351 35 4 14 12 13 10 8 1 7 − + 14 12 13 10 8 1 7 +−S −+R 5 734 G6Z-1F-A 8.3 2.3 7.62 15.24 2.54 Eleven, 1.1 Orientation mark G6ZU-1F-A Orientation mark 9.3 11-0.62.54 7.62 15.24 8.6 0.18 9.6 G6Z-1F-A G6ZU-1F-A Mounting Dimensions (Top View) Tolerance: ±0.1 mm Terminal Arrangement/Internal Connections (Top View) Note 1: Each value has a tolerance of ±0.3 mm. 2: The coplanarity of the terminals is 0.1 mm max. 0.2 (Coil terminal) 1114 12 13 10 8 1 76 S − + R − + 9.3 7-0.6 2.54 7.62 15.24 8.6 0.18 9.6 3-0.4 8.3 2.30.80.8 15.24 7.62 2.54 0.8 Seven, 1.1 Orientation mark G6ZK-1FE Mounting Dimensions (Top View) Tolerance: ±0.1 mm Terminal Arrangement/Internal Connections (Top View) Note 1: Each value has a tolerance of ±0.3 mm. 2: The coplanarity of the terminals is 0.1 mm max. 0.2 (Coil terminal) 1114 12 13 10 8 1 76 S − + R − + 8.3 2.3 15.24 7.62 2.54 Ten, 1.1 Orientation mark 9.3 Ten, 0.62.54 7.62 15.24 8.6 0.18 9.6 G6ZK-1FE-A Mounting Dimensions (Top View) Tolerance: ±0.1 mm Terminal Arrangement/Internal Connections (Top View) Note 1: Each value has a tolerance of ±0.3 mm. 2: The coplanarity of the terminals is 0.1 mm max. 0.2 (Coil terminal)

352 High-frequency Relay G6Z

S − + R − + 35 4 Orientation mark 9.3 Nine, 0.6 2.54 7.62 15.24 8.6 0.18 9.6 Three, 0.4 8.3 2.30.8 0.8 15.24 0.8 2.54 Nine, 1.1 7.62 G6ZK-1F Mounting Dimensions (Top View) Tolerance: ±0.1 mm Terminal Arrangement/Internal Connections (Top View) Note 1: Each value has a tolerance of ±0.3 mm. 2: The coplanarity of the terminals is 0.1 mm max. 0.2 (Coil terminal) 14 12 13 10 8 1 76 S − + R − + 35 48.3 2.3 15.24 7.62 2.54 Twelve, 1.1 9.3 Twelve, 0.62.54 7.62 15.24 8.6 0.18 9.6 Orientation mark G6ZK-1F-A Mounting Dimensions (Top View) Tolerance: ±0.1 mm Terminal Arrangement/Internal Connections (Top View) Note 1: Each value has a tolerance of ±0.3 mm. 2: The coplanarity of the terminals is 0.1 mm max. 0.2 (Coil terminal)

High-frequency Relay G6Z 353 Packaging 1. Tube Packaging Relays in tube packaging are arranged so that the orientation mark of each Relay in on the left side. Be sure not to make mistakes in Relay orientation when mounting the Relay to the PCB. Tube length: 530 mm (stopper not included) No. of Relays per tube: 25 2. Tape and Reel Packaging (Surface mount Terminal Models) When ordering Relays in tape packi ng, add the prefix “-TR” to the model number, otherwise the Relays in stick packing will be provided. Relays per Reel: 300 Direction of Relay Insertion Reel Dimensions Carrier Tape Dimensions Note: The radius of the unmarked corner is 0.3 mm. Recommended Soldering Method ■Temperature Conditions for IRS Method When using reflow soldering, ensure that the Relay terminals and the top of the case stay below the following curve. Check that these conditions are actually satisfied before soldering the terminals. Do not quench the terminals after mounting. Clean the Relay using alcohol or water no hotter than 40°C max. The thickness of cream solder to be applied should be between 150 and 200 μm on OMRON’s recommended PCB pattern. Check the soldering in the actual mounting conditions before use. Stopper (gray) Operation of Relays Stopper (green) Top tape (cover tape) Carrier tape Emboss tape Orientation mark Pulling direction Pulling direction A 21±0.8 dia.2±0.5 13±0.2 dia. Enlarged view of A 33.5±1 37.5±1 330 80 32±0.3 22.6±0.1 20.6±0.1 5° max. 0.2 1.5+0.1 1.7+0.15 R0.75 28.4±0.1 A Enlarged view of A 1.75±0.1 10±0.1 0.5±0.05 14.2±0.1 16±0.1 4±0.1 4±0.1 10.2±0.1 5° max. Measured part Preheating (T1 → T2, t1) Soldering (T3, t2) Maximum peak (T4) Terminals 150 → 180°C, 120 s max. 230°C min, 30 s max. 250°C max. Top of case --- --- 255 °C max. Temperature Preheating Soldering Time t1 t2 Relay Solder Terminal PCB Land Correct Soldering In correct Soldering Insufficient amount of solder Excessive amount of solder

354 High-frequency Relay G6Z

■Precautions for Correct Use Please observe the following precautions to prevent failure to operate, malfunction, or undesirable effect on product performance. High-frequency Characteristics Measurement Method and Measurement Substrate High-frequency characteristics for the G6Z are measured in the way shown below. Consult your OMRON representative for details on 50-Ω models. Measurement Method for 75-Ω Models Through-hole Substrate (75-Ω Models, E-shape or Y-shape) SMD-type Substrate (75-Ω Models, E-shape or Y-shape) Substrate for High-frequency Characteristic Compensation (75-Ω Models, E-shape or Y-shape) Substrate Types Material: FR-4 glass epoxy (glass cloth impregnated with epoxy resin and copper laminated to its outer surface) Thickness: 1.6 mm Thickness of copper plating:18 μm Note: 1. The compensation substrate is used when measuring the Relay’s insertion loss. The insertion loss is obtained by subtracting the measured value for the compensation substrate from the measured value with the Relay mounted to the high-frequency measurement substrate. Note: 2. For convenience, the diagrams of the high-frequency measurement substrates given here apply both to models with an E-shape terminal structure and to models with a Y-shape terminal structure. Note: 3. Be sure to mount a standoff tightly to the through-hole substrate. Note: 4. Use measuring devices, connec tors, and substrates that are appropriate for 50 Ω and 75 Ω respectively. Note: 5. Ensure that there is no pattern under the Relay. Otherwise, the impedance may be adversely affected and the Relay may not be able to attain its full characteristics. Handling Do not use the Relay if it has been dropped. Dropping the Relay may adversely affect its functionality. Protect the Relay from direct sunlight and keep the Relay under nor- mal temperature, humidity, and pressure. Flow Soldering Solder: JIS Z3282, H63A Soldering temperature: Approx. 250°C (260°C if the DWS method is used) Soldering time: Approx. 5 s max. (approx. 2 s for the first time and approx. 3 s for the second time if the DWS method is used) Be sure to make a molten solder level adjustment so that the solder will not overflow on the PCB. G6Z 75-Ω terminating resistance Network vector analyzer (Agilent Technologies) 50Ω/75Ω adapter (Agilent Technologies) 11852B-004 HP8753D 1.4 0.4 40 30 6.3 0.95 3.59 4-dia. through-hole 0.6-dia. through-hole (Unit: mm) 0.4 1.4 3040 3.91 0.95 0.6-dia. through-hole 4-dia. through-hole (Unit: mm) 6.3 30.7 10.95 40 30 4-dia. through-hole 0.6-dia. through-hole (Unit: mm)

High-frequency Relay G6Z 355 Claw Securing Force During Automatic Mounting During automatic insertion of Relays, be sure to set the securing force of each claw to the following so that the Relay’s characteristics will be maintained. Latching Relay Mounting Make sure that the vibration or shock that is generated from other devices, such as Relays, on the same panel or substrate and imposed on the Latching Relay does not exceed the rated value, oth- erwise the set/reset status of the Latching Relay may be changed. The Latching Relay is reset before shipping. If excessive vibration or shock is imposed, however, the Latching Relay may be set acciden- tally. Be sure to apply a reset signal before use. Coating Do not use silicone coating to coat the Relay when it is mounted to the PCB. Do not wash the PCB after the Relay is mounted using detergent containing silicone. Other wise, the detergent may remain on the surface of the Relay. A B Direction A: 4.90 N max. Direction B: 4.90 N max. Direction C: 4.90 N max. Secure the claws to the shaded area. Do not attach them to the center area or to only part of the Relay.

356 High-frequency Relay G6Z

Omron Electronic Components, LLC Terms and Conditions of Sales 1. Definitions : The words used herein are defined as follows. (a) Terms: These terms and conditions (b) Seller: Omron Electronic Com ponents LLC and its subsidiaries (c) Buyer: The buyer of Products, including any end user in section III through VI (d) Products: Products and/or services of Seller (e) Including: Including without limitation 2. Offer; Acceptance: These Terms are deemed part of all quotations, acknowledgments, invoices, purchase orders and other documents, whether electronic or in writing, relating to the sale of Products by Seller. Seller hereby objects to any Terms proposed in Buyer's purchase order or other documents which are inconsistent with, or in addition to, these Terms. 3. Distributor : Any distributor shall inform its customer of the contents after and including section III of these Terms. 1. Prices; Payment : All prices stated are current, subject to change without notice by Seller. Buyer agrees to pay the price in effect at the time the purchase order is accepted by Seller. Payments for Products received are due net 30 days unless otherwise stated in the invoice. Buyer shall have no right to set off any amounts against the amount owing in respect of this invoice. 2. Discounts : Cash discounts, if any, will apply only on the net amount of invoices sent to Buyer after deducting transportation charges, taxes and duties, and will be allowed only if (a) the invoice is paid according to Seller's payment terms and (b) Buyer has no past due amounts owing to Seller. 3. Interest : Seller, at its option, may charge Buyer 1.5% interest per month or the maximum legal rate, whichever is less, on any balance not paid within the stated terms. 4. Orders : Seller will accept no order less than 200 U.S. dollars net billing. 5. Currencies : If the prices quoted herein are in a currency other than U.S. dollars, Buyer shall make remittance to Seller at the then current exchange rate most favorable to Seller; provided that if remittance is not made when due, Buyer will convert the amount to U.S. dollars at the then current exchange rate most favorable to Seller available during the period between the due date and the date remittance is actually made. 6. Governmental Approvals : Buyer shall be responsible for all costs involved in obtaining any government approvals regarding the importation or sale of the Products. 7. Taxes : All taxes, duties and other governmental charges (other than general real property and income taxes), including any interest or penalties thereon, imposed directly or indirectly on Seller or required to be collected directly or indirectly by Seller for the manufacture, production, sale, delivery, importation, consumption or use of the Products sold hereunder (including customs duties and sales, excise, use, turnover and license taxes) shall be charged to and remitted by Buyer to Seller. 8. Financial : If the financial position of Buyer at any time becomes unsatisfactory to Seller, Seller reserves the right to stop shipments or require satisfactory security or payment in advance. If Buyer fails to make payment or otherwise comply with these Terms or any related agreement, Seller may (without liability and in addition to other remedies) cancel any unshipped portion of Products sold hereunder and stop any Products in transit until Buyer pays all amounts, including amounts payable hereunder, whether or not then due, which are owing to it by Buyer. Buyer shall in any event remain liable for all unpaid accounts. 9. Cancellation; Etc: Orders are not subject to rescheduling or cancellation unless Buyer indemnifies Seller fully against all costs or expenses arising in connection therewith. 10. Force Majeure : Seller shall not be liable for any delay or failure in delivery resulting from causes beyond its control, including earthquakes, fires, floods, strikes or other labor disputes, shortage of labor or materials, accidents to machinery, acts of sabotage, riots, delay in or lack of transportation or the requirements of any government authority. 11. Shipping; Delivery: Unless otherwise expressly agreed in writing by Seller: (a) All sales and shipments of Products sh all be FOB shipping point (unless otherwise stated in writing by Seller), at which point title to and all risk of loss of the Products shall pass from Seller to Buyer, provided that Seller shall retain a security interest in the Products until the full purchase price is paid by Buyer; (b) Delivery and shipping dates are estimates only; and (c) Seller will package Products as it deems proper for protection against normal handling and extra charges apply to special conditions. 12. Claims: Any claim by Buyer against Seller for shortage or damage to the Products occurring before delivery to the carrier or any claim related to pricing or other charges must be presented in detail in writing to Seller within 30 days of receipt of shipment. 1. Suitability: IT IS THE BUYER’S SOLE RESPOINSIBILITY TO ENSURE THAT ANY OMRON PRODUCT IS FIT AND SUFFICIENT FOR USE IN A MOTORIZED VEHICLE APPLICATION. BUYER SHALL BE SOLELY RESPONSIBLE FOR DETERMINING APPROPRIATENESS OF THE PARTICULAR PRODUCT WITH RESPECT TO THE BUYER’S APPLICATION INCLUDING (A) ELECTRICAL OR ELECTRONIC COMPONENTS, (B) CIRCUITS, (C) SYSTEM ASSEMBLIES, (D) END PRODUCT, (E) SYSTEM, (F) MATERIALS OR SUBSTANCES OR (G) OPERATING ENVIRONMENT. Buyer acknowledges that it alone has determined that the Products will meet their requirements of the intended use in all cases. Buyer must know and observe all prohibitions of use applicable to the Product/s. 2. Use with Attention: The followings are some examples of applications for which particular attention must be given. This is not intended to be an exhaustive list of all possible use of any Product, nor to imply that any use listed may be suitable for any Product: (a) Outdoor use, use involving potential chemical contamination or electrical interference. (b) Use in consumer Products or any use in significant quantities. (c) Energy control systems, combustion systems, railroad systems, aviation systems, medical equipment, amusement machines, vehicles, safety equipment, and installations subject to separate industry or government regulations. (d) Systems, machines, and equipment that c ould present a risk to life or property. 3. Prohibited Use: NEVER USE THE PRODUCT FOR AN APPLICATION INVOLVING SERIOUS RISK TO LIFE OR PROPERTY WITHOUT ENSURING THAT THE SYSTEM AS A WHOLE HAS BEEN DESIGNED TO ADDRESS THE RISKS, AND THAT THE PRODUCT IS PROPERLY RATED AND INSTALLED FOR THE INTENDED USE WITHIN THE OVERALL EQUIPMENT OR SYSTEM. 4. Motorized Vehicle Application: USE OF ANY PRODUCT/S FOR A MOTORIZED VEHICLE APPLICATION MUST BE EXPRESSLY STATED IN THE SPECIFICATION BY SELLER. 5. Programmable Products: Seller shall not be responsible for the Buyer's programming of a programmable Product. 1. Warranty : Seller's exclusive warranty is that the Products will be free from defects in materials and workmanship for a period of twelve months from the date of sale by Seller (or such other period expressed in writing by Seller). SELLER MAKES NO WARRANTY OR REPRESENTATION, EXPRESS OR IMPLIED, ABOUT ALL OTHER WARRANTIES, NON-INFRINGEMENT, MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE OF THE PRODUCTS. 2. Buyer Remedy : Seller's sole obligation hereunder shall be to replace (in the form originally shipped with Buyer responsible for labor charges for removal or replacement thereof) the non-complying Product or, at Seller's election, to repay or credit Buyer an amount equal to the purchase price of the Product; provided that there shall be no liability for Seller or its affiliates unless Seller's analysis confirms that the Products were correctly handled, stored, installed and maintained and not subject to contamination, abuse, misuse or inappropriate modification. Return of any Products by Buyer must be approved in writing by Seller before shipment. 3. Limitation on Liability : SELLER AND ITS AFFILIATES SHALL NOT BE LIABLE FOR SPECIAL, INDIRECT, INCIDENTAL OR CONSEQUENTIAL DAMAGES, LOSS OF PROFITS OR PRODUCTION OR COMMERCIAL LOSS IN ANY WAY CONNECTED WITH THE PRODUCTS, WHETHER SUCH CLAIM IS BASED IN CONTRACT, WARRANTY, NEGLIGENCE OR STRICT LIABILITY. FURTHER, IN NO EVENT SHALL LIABILITY OF SELLER OR ITS AFFILITATES EXCEED THE INDIVIDUAL PRICE OF THE PRODUCT ON WHICH LIABILITY IS ASSERTED. 4. Indemnities : Buyer shall indemnify and hold harmless Seller, its affiliates and its employees from and against all liabilities, losses, claims, costs and expenses (including attorney's fees and expenses) related to any claim, investigation, litigation or proceeding (whether or not Seller is a party) which arises or is alleged to arise from Buyer's acts or omissions under these Terms or in any way with respect to the Products. 1. Intellectual Property : The intellectual property embodied in the Products is the exclusive property of Seller and its affiliates and Buyer shall not attempt to duplicate it in any way without the written permission of Seller. Buyer (at its own expense) shall indemnify and hold harmless Seller and defend or settle any action brought against Seller to the extent that it is based on a claim that any Product made to Buyer specifications infringed intellectual property rights of another party. 2. Property; Confidentiality : Notwithstanding any charges to Buyer for engineering or tooling, all engineering and tooling shall remain the exclusive property of Seller. All information and materials supplied by Seller to Buyer relating to the Products are confidential and proprietary, and Buyer shall limit distribution thereof to its trusted employees and strictly prevent disclosure to any third party. 3. Performance Data : Performance data is provided as a guide in determining suitability and does not constitute a warranty. It may represent the result of Seller's test conditions, and the users must correlate it to actual application requirements. 4. Change In Specifications : Product specifications and descriptions may be changed at any time based on improvements or other reasons. It is Seller’s practice to change part numbers when published ratings or features are changed, or when significant engineering changes are made. However, some specifications of the Product may be changed without any notice. 5. Errors And Omissions : The information on Seller’s website or in other documentation has been carefully checked and is believed to be accurate; however, no responsibility is assumed for clerical, typographical or proofreading errors or omissions. 6. Export Controls : Buyer shall comply with all applicable laws, regulations and licenses regarding (a) export of the Products or information provided by Seller; (b) sale of Products to forbidden or other proscribed persons or organizations; (c) disclosure to non- citizens of regulated technology or information. 1. Waiver : No failure or delay by Seller in exercising any right and no course of dealing between Buyer and Seller shall operate as a waiver of rights by Seller. 2. Assignment : Buyer may not assign its rights hereunder without Seller's written consent. 3. Law : These Terms are governed by Illinois law (without regard to conflict of laws). Federal and state courts in Cook County, Illinois have exclusive jurisdiction for any dispute hereunder. 4. Amendment : These Terms constitute the entire agreement between Buyer and Seller relating to the Products, and no provision may be changed or waived unless in writing signed by the parties. 5. Severability : If any provision hereof is rendered ineffective or invalid, such provision shall not invalidate any other provision. I. GENERAL II. SALES III. PRECAUTIONS IV. WARRANTY AND LIMITATION V. INFORMATION; ETC. VI. MISCELLANEOUS

Certain Precautions on Specifications and Use 1. Suitability for Use . Seller shall not be responsible for conformity with any stan- dards, codes or regulations which apply to the combination of the Product in Buyer's application or use of the Product. At Buyer's request, Seller will pro- vide applicable third party certification documents identifying ratings and limi- tations of use which apply to the Produc t. This information by itself is not sufficient for a complete determination of the suitability of the Product in com- bination with the end product, machine, sy stem, or other application or use. Buyer shall be solely responsible for determining appropriateness of the par- ticular Product with respect to Buyer' s application, product or system. Buyer shall take application responsibility in all cases but the following is a non- exhaustive list of applications for which particular attention must be given: (i) Outdoor use, uses involving potential chemical contamination or electrical interference, or conditions or uses not described in this document. (ii) Energy control systems, combustion systems, railroad systems, aviation systems, medical equipment, amusement machines, vehicles, safety equipment, and installations subject to separate industry or government regulations. (iii) Use in consumer products or any use in significant quantities. (iv) Systems, machines and equipment that could present a risk to life or property. Please know and observe all prohibitions of use applicable to this product. NEVER USE THE PRODUCT FOR AN APPLICATION INVOLVING SERIOUS RISK TO LIFE OR PROPERTY WITHOUT ENSURING THAT THE SYSTEM AS A WHOLE HAS BEEN DESIGNED TO ADDRESS THE RISKS, AND THAT THE OMRON PRODUCT IS PROPERL Y RATED AND INSTALLED FOR THE INTENDED USE WITHIN THE OVERALL EQUIPMENT OR SYSTEM. 2. Programmable Products . Seller shall not be respons ible for the user's pro- gramming of a programmable product, or any consequence thereof. 3. Performance Data . Performance data given in this publication is provided as a guide for the user in determining suitability and does not constitute a war- ranty. It may represent the result of Seller's test conditions, and the users must correlate it to actual application requirements. Actual performance is subject to Seller's Warranty and Limitations of Liability. 4. Change in Specifications . Product specifications and accessories may be changed at any time based on improvements and other reasons. It is our prac- tice to change part numbers when publi shed ratings or features are changed, or when significant construction changes are made. However, some specifica- tions of the Product may be changed without any notice. When in doubt, spe- cial part numbers may be assigned to fix or establish key specifications for your application. Please consult with your Seller representative at any time to confirm actual specifications of purchased Product. 5. Errors and Omissions . The information in this publication has been carefully checked and is believed to be accurate; however, no responsibility is assumed for clerical, typographical or proofreading errors, or omissions. 6. RoHS Compliance . Where indicated, our products currently comply, to the best of our knowledge as of the date of this publication, with the requirements of the European Union's Directive on the Restriction of certain Hazardous Substances ("RoHS"), although the requirements of RoHS do not take effect until July 2006. These requirements may be subject to change. Please consult our website for current information. OMRON ON-LINE Global - http://www.omron.com USA - http://www.components.omron.com Cat. No. X302-E-1 Printed in USA OMRON ELECTRONIC COMPONENTS LLC 55 E. Commerce Drive, Suite B Schaumburg, IL 60173 847-882-2288 08/09 Specifications subject to change without notice Complete “Terms and Conditions of Sale” for product purchase and use are on Omron’s website at http://www.components.omron.com – under the “About Us” tab, in the Legal Matters section. ALL DIMENSIONS SHOWN ARE IN MILLIMETERS. To convert millimeters into inches, multiply by 0.03937. To convert grams into ounces, multiply by 0.03527.