G6S-2F OMRON | Alldatasheet
Document overview
- Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
- PDF pages: 9
Technical content
n Third generation surface mount design n Design is based on worldwide telecom- munications, data communications, computer peripheral and office automa- tion relay requirements n High dielectric withstand voltage of 2,000 VAC between coil and contacts (stan- dard type) n Meets 2.5kV Bellcore surge requirement n Offers significant board space savings n European version certified for EN60950/ EN41003 Supplementary Insulation at 250 V n Available in PCB through-hole terminal configuration n Tape and reel packaging option available Low Signal Relay G6S
Ordering Information
Terminal Contact form Non-latching Single coil latching Dual coil latching dual coil latching Gull-wing DPDT G6S-2F G6SU-2F G6SK-2F G6SK-2F-H Inside “L ” DPDT G6S-2G G6SU-2G G6SK-2G G6SK-2G-H PCB through-hole DPDT G6S-2 G6SU-2 G6SK-2 G6SK-2-H To Order: Select the part number and add the desired coil voltage rating, (e.g., G6S-2F-DC12 ). n STANDARD VERSION Part number Terminal Contact form Non-latching Gull-wing DPDT G6S-2F-Y Inside “L ” DPDT G6S-2G-Y PCB through-hole DPDT G6S-2-Y n EUROPEAN VERSION Certified for EN60950/EN41003 Supplementaty Insulation at 250 V
Load Resistive load (cos ø = 1) Rated load 0.5 A at 125 VAC
2 A at 30 VAC
Contact material Ag (Au clad) Max. carry current 2 A Max. operating voltage 250 VAC, 220 VDC Max. operating current 2 A Max. switching capacity 62.5 VA, 60 W Min. permissible load 10 mVDC, 10 µA Rated Rated Coil Pick-up Dropout Maximum Power voltage current resistance voltage voltage voltage consumption (VDC) (mA) ( Ω ) % of rated voltage (mW) 4.5 31.0 145 5 28.1 178 6 23.3 257 9 15.5 579 12 11.7 1,028 24 8.3 2,880 75% max. 10% min. 170% max. 200 n COIL DATA G6S – Standard non-latching (G6S-2F, G6S-2G, G6S-2) Rated Rated Coil Set pick-up Reset pick-upMaximum Power voltage current resistance voltage voltage voltage consumption (VDC) (mA) ( Ω ) % of rated voltage (mW) 3 33.3 90 75% max. 75% max. 180% max. 100 4.5 22.2 203 5 20.0 250 6 16.7 360 9 11.1 810 12 8.3 1,440 24 6.3 3,840 75% max. 75% max. 180% max. 150 G6SU – Standard single coil latching (G6SU-2F, G6SU-2G, G6SU-2) Set coil Reset coil Rated Rated Coil Rated Coil Set pick-up Reset pick-upMaximum Power voltage current resistance current resistance voltage voltage voltage consumption (VDC) (mA) ( Ω ) (mA) ( Ω ) % of rated voltage (mW) 4.5 44.4 101 44.4 101 5 40.0 125 40.0 125 6 33.3 180 33.3 180 9 22.2 405 22.2 405 12 16.7 720 16.7 720 G6SK – Standard dual coil latching (G6SK-2F, G6SK-2G, G6SK-2)
Note: 1. The rated current and coil resistance are measured at a coil temperature of 23°C (73°F) with a tolerance of ±10%. 2. The operating characteristics are measured at a coil temperature of 23°C (73°F) unless otherwise specified. 3. Pick-up voltage is measured with no carry current across the contacts. 4. Pick-up voltage will vary with temperature. n COIL DATA (continued) G6SK – Standard high-sensitivity dual coil latching (G6SK-2F-H, G6SK-2G-H, G6SK-2-H) Set coil Reset coil Rated Rated Coil Rated Coil Set pick-up Reset pick-upMaximum Power voltage current resistance current resistance voltage voltage voltage consumption (VDC) (mA) ( Ω ) (mA) ( Ω ) % of rated voltage (mW) 4.5 31.0 145 31.0 145 5 28.1 178 28.1 178 6 23.3 257 23.3 257 9 15.6 579 15.6 579 12 11.7 1,028 11.7 1,028 G6S – European version, non-latching (G6S-2F-Y, G6S-2G-Y, G6S-2-Y) Rated Rated Coil Pick-up Dropout Maximum Power voltage current resistance voltage voltage voltage consumption (DC) (mA) ( Ω ) % of rated voltage (mW) 3 66.7 45 75% max. 10% min. 130% max. 200 4.5 44.6 101 5 40.0 125 6 33.3 180 9 22.2 405 12 16.7 720 24 9.58 2,504 75% max. 10% min. 110% max. 230 Contact resistance 75 m Ω max. Operate (set) time 4 ms max. (mean value approx. 2.5 ms G6S; 2.0 ms G6SU, G6SK) Release (reset) time 4 ms max. (mean value approx. 1.5 ms G6S; 2.0 ms G6SU, G6SK) Bounce time Approx. 0.5 ms Insulation resistance 1,000 M Ω min. (at 500 VDC) Dielectric strength 2,000 VAC, 50/60 Hz for 1 minute (G6S, G6SU) between coil and contacts 1,000 VAC, 50/60 Hz for 1 minute (G6SK) between coil and contacts 1,500 VAC, 50/60 Hz for 1 minute between contacts of different poles 1,000 VAC, 50/60 Hz for 1 minute between contacts of same pole Surge withstand voltage 2,500 V, 2 x 10 µS (conforms to Bellcore specifications) for G6S and G6SU; 1,500 V, 10 x 160 µS (conforms to FCC part 68) for G6SK between coil and contacts 2,500 V, 2 x 10 µS (conforms to Bellcore specs.) between contacts of different poles 1,500 V, 10 x 160 µS (conforms to FCC part 68) between contacts of same pole Vibration Mechanical durability 10 to 55 Hz; 5 mm (0.20 in) double amplitude Malfunction durability 10 to 55 Hz; 3.3 mm (0.13 in) double amplitude Shock Mechanical durability 1,000 m/s 2; approx. 100 G Malfunction durability 750 m/s2; approx. 75 G Ambient temperature -40 to +85 °C (-40°F + 185°F) Humidity 35 to 85% RH Service life Mechanical 100,000,000 operations min. (at 36,000 operations/hour) Electrical See "Characteristic Data" Weight Approx. 2g (0.07 oz) Note: Data shown are of initial value. n CHARACTERISTICS
1000 1500 2000 2500 3000 3500 n CHARACTERISTIC DATA Maximum switching capacity Ambient temperature vs. maximum coil voltage (G6S) 200 150 140 170 180 100 250 -40 -20 0 20 40 60 80 100 0.5 0.3 0.7 0.1 10 30 50 70 100 300 500 700 1000 Maximum coil voltage (% of rated voltage) Ambient temperature (°C) Rated operating current (A) AC resistive load DC resistive load A B Rated operating voltage (V) AB DC (30V, 2A) DC (220V, 0.27A) AC (31.25V, 2A) AC (250V , 0.25A) 200 150 170 100 250 -40 -20 0 20 40 60 80 100 Maximum coil voltage (% of rated voltage) Ambient temperature (°C)
24 VDC
Ambient temperature vs. maximum coil voltage (G6SU, G6SK) G6SK (3-12 VDC) G6SK (24 VDC) G6SU 3-12 VDC Service Life Breakdown voltage (V) Breakdown voltage (V) Service life (x106 operations) Resistive load: 10mA, 10 VDC Ambient temperature: +85° Rated operating current (A) Contact resistance (mW) 0 0.1 1000 500 300 100 200 0.50.40.30.2 Service life (x106 operations) Resistive load: 100mA, 28 VDC Ambient temperature: +85° Contact resistance (mW) 0 0.2 1000 500 300 100 200 1.00.80.60.4 Contact resistance (mW) Service life (x106 operations) Resistive load: 100mA, 50 VDC Ambient temperature: +85° Service life (x104 operations) 0 0.4 500 300 100 200 2.01.61.20.8 1000 1500 2000 2500 3000 3500 50Number of contacts (pcs.) Between coil and contacts Number of contacts (pcs.) Between contacts of same pole Between contacts of different poles Electrical service life Dielectric strength (Standard version, non-latching) Detecting current: 1mA 0 0.2 1000 500 300 100 200 1.00.80.60.4
4000 4500 5000 5500 6000 6500 1500 2000 2500 3000 3500 4000 1500 2000 2500 3000 3500 4000 4000 4500 5000 5500 6000 6500 1500 2000 2500 3000 3500 4000 (2 x 10 µs) Number of contacts (pcs.) 3500 4000 4500 5000 5500 6000 Number of contacts (pcs.) 1500 2000 2500 3000 3500 4000 (10 x 160 µs) Number of contacts (pcs.) 3500 4000 4500 5000 5500 6000 (10 x 160 µs) Between contacts of same pole Breakdown voltage (V) Between coil and contacts Breakdown voltage (V) Breakdown voltage (V) Between contacts of different poles Between coil and contacts Impulse withstand voltage (Standard version, non-latching) (10 x160 µs) Number of contacts (pcs.) Number of contacts (pcs.) (10 x 160µs) Number of contacts (pcs.) (2 x 10 µs) Between contacts of same pole Breakdown voltage (V) Breakdown voltage (V) Breakdown voltage (V) Between contacts of different poles Between coil and contacts Impulse withstand voltage (European version) Breakdown voltage (V) Breakdown voltage (V) Number of contacts (pcs.) Number of contacts (pcs.) Dielectric strength (European version, non-latching) Detecting current: 1mA Between coil and contacts Between contacts of same pole Between contacts of different poles Between contacts of different poles Between coil and contacts
G6S-2-Y12 VDCMADE IN JAPAN G6S-2G12 VDCMADE IN JAPAN 95° ±4° G6S-2F12 VDCMADE IN JAPAN 95°±4° Dimensions Unit: mm (inch) G6S-2F, G6S-2F-Y G6S-2G, G6S-2G-Y Orientation mark Terminal arrangement/ Internal connections (Top view) 9.2 ±0.2 (.362) max. .65 (.026) 12 10 9 8 1 3 4 5 Mounting pads (Top view) 2.54 (.10) 5.08 (.20) 2.54 (.10) 2.2 (.087) 6.1 (.24) 1.0 (.039) 14.8 ±0.2 (.583) max. 2.54 (.10) .50 (.019) 7.3 ±0.2 (.287) max. 2.54 (.10)5.08 (.20) 1.25 ±0.2 (.05) Mounting pads (Top view) Orientation mark 12 10 9 8 1 3 4 5 Terminal arrangement/ Internal connections (Top view) .65 (.026) 2.54 (.10) 5.08 (.20) 2.54 (.10) 1.0 (.039) 8.0 (.315)2.2 (.087) 14.8 ±0.2 (.583) max. 7.3 ±0.2 (.287) max. 2.54 (.10) 9.2 ±0.2 (.362) max. .50 (.019) 0.25 (.01) 2.54 (.10)5.08 (.20) 1.25 ±0.2 (.05) -0.39.2 +0.5 0.25 (.01) 4.9 +0.3 -0.5 G6S-2, G6S-2-Y Orientation mark Terminal arrangement/ Internal connections (Bottom view) 9.2 ±0.2 (.362) max. .65 (.026) 12 10 9 8 1 3 4 5 Mounting holes (Bottom view) 2.54 (.10) 5.08 (.20) 2.54 (.10)14.8 ±0.2 (.583) max. 2.54 (.10) .50 (.019) 7.3 ±0.2 (.287) max. 2.54 (.10)5.08 (.20) 1.25 ±0.2 (.05) 10. 16 ± 0.1 n STANDARD 4.9 +0.3 -0.5 8 -ø 1 dia. holes 1.0 (.039) 1.11 (.04)
G6SU-2G12 VDCMADE IN JAPANMADE IN JAPAN 95° ±4° G6SU-2- nn
12 VDCMADE IN JAPAN
G6SU-2F12 VDCMADE IN JAPAN 95°±4° _SR _SR G6SU-2F G6SU-2G Mounting pads (Top view) Orientation mark 12 10 9 8 1 3 4 5 Terminal arrangement/ Internal connections (Top view) .65 (.026) 2.54 (.10) 7.3 ±0.2 (.287) max. 2.54 (.10) 9.2 ±0.2 (.362) max. .50 (.019) 5.08 (.20) 0.25 (.01) 2.54 (.10) Orientation mark Terminal arrangement/ Internal connections (Top view) 9.2 ±0.2 (.362) max. .65 (.026) 12 10 9 8 1 3 4 5 Mounting pads (Top view) 2.54 (.10) 5.08 (.20) 2.54 (.10) 2.2 (.087) 6.1 (.24) 1.0 (.039) 14.8 ±0.2 (.583) max. 2.54 (.10)5.08 (.20) .50 (.019) 7.3 ±0.2 (.287) max. 0.25 (.01) 2.54 (.10) 1.25 ±0.2 (.05) 1.25 ±0.2 (.05) 1.0 (.039) 8.0 (.315)2.2 (.087) 5.08 (.20) 2.54 (.10)14.8 ±0.2 (.583) max. n SINGLE COIL LATCHING G6SU-2 Terminal arrangement/ Internal connections (Bottom view) 9.2 ±0.2 (.362) max. .65 (.026) Mounting holes (Bottom view) 14.8 ±0.2 (.583) max. 2.54 (.10) 5.08 (.20) 7.3 ±0.2 (.287) max. 2.54 (.10) .50 (.019) 0.25 (.01) 5.08 (.20) Orientation mark 12 10 9 8 1 3 4 5 2.54 (.10) 5.08 (.20) 2.54 (.10) 10. 16 ± 0.1 + - S R - + 1.0 (.039) 1.11 (.04) 8 -ø 1 dia. holes -0.54.9 +0.3 9.2 +0.5-0.3
Note: 1. Coplanarity is 0.1 mm max. 2. and indicate mounting orientation marks. G6SK-2- nn G6SK-2G12 VDCMADE IN JAPAN 95° ±4° S R S R G6SK-2F12 VDCMADE IN JAPAN 95°±4° G6SK-2F, G6SK-2F-H Mounting pads (Top view) Terminal arrangement/ Internal connections (Top view) n DUAL COIL LATCHING Orientation mark 1 3 4 5 6 .65 (.026) 2.54 (.10) 5.08 (.20) 1.0 (.039) 8.0 (.315)2.2 (.087) 14.8 ±0.2 (.583) max. 7.3 ±0.2 (.287) max. 2.54 (.10) 9.2 ±0.2 (.362) max. .50 (.019) 5.08 (.20) 2.54 (.10) 12 10 9 8 7 0.25 (.01) 2.54 (.10) 2.54 (.10) Orientation mark 9.2 ±0.2 (.362) max. .65 (.026) 2.54 (.10) 5.08 (.20) 2.2 (.087) 6.1 (.24) 1.0 (.039) 14.8 ±0.2 (.583) max. 7.3 ±0.2 (.287) max. 2.54 (.10) 12 10 9 8 7 1 3 4 5 6 0.25 (.01) 2.54 (.10)2.54 (.10) 2.54 (.10) .50 (.019) 5.08 (.20) 1.25 ±0.2 (.05) 9.2 +0.5-0.3 1.25 ±0.2 (.05) 4.9 +0.3 -0.5 G6SK-2G, G6SK-2G-H Mounting pads (Top view) Terminal arrangement/ Internal connections (Top view) Orientation mark 9.2 ±0.2 (.362) max. .65 (.026) 2.54 (.10) 5.08 (.20) 12..7±0.11.0 (.039) 14.8 ±0.2 (.583) max. 7.3 ±0.2 (.287) max. 2.54 (.10) 12 10 9 8 7 1 3 4 5 6 0.25 (.01) 2.54 (.10)2.54 (.10) 2.54 (.10) .50 (.019) 5.08 (.20) G6SK-2, G6SK-2-H Mounting holes (Bottom view) Terminal arrangement/ Internal connections (Bottom view) 5.08 (.20) 123456 1 2345 6 123456 S 1.11 (.04) Unit: mm (inch) 10 - ø 1 dia. holes R
Tube packing Standard nomenclature 50 pcs per anti-static tube Tape packing When ordering, add “TR” before the rated coil voltage (e.i., G6S-2F- TR -DC12) Note: TR is not part of the relay model number and will not be marked on the relay Type Contact Form Coil Rating Contact Ratings G6S-2F DPDT 1.5 to 48 VDC 0.5 A, 125 VAC G6S-2F-Y 0.3 A, 110 VDC G6S-2G 2.0 A, 30 VDC G6S-2G-Y G6S-2 G6S-2-Y G6SU-2F G6SU-2G G6SU-2 G6SK-2F G6SK-2G G6SK-2 G6SK-2F-H G6SK-2G-H G6SK-2-H n APPROVALS UL (File No. E41515)/ CSA (File No. LR24825) n ACCESSORIES Note: 1. The rated values approved by each of the safety standards (e.g., UL and CSA) may be different from the performance characteristics individually defined in this catalog. Feed direction 21±0.8 (.827) 2±0.5 (.0.79) 13±0.2 (.512) R1.0 29.4±1.0 (1.16) Cover tape Carrier tape Emboss tape Orientation mark (3.15) 330 (12.99) Relays per reel: 400 Reels per packing carton: 2 (800 relays) 24.4+2 (.961) .-0 n DIMENSIONS OMRON ELECTRONICS, INC. OMRON CANADA, INC. One East Commerce Drive 885 Milner Avenue Schaumburg, IL 60173 Scarborough, Ontario M1B 5V8 1-800-55-OMRON 416-286-6465