G6N OMRON | Alldatasheet
Document overview
- PDF pages: 3
Technical content
Telecom Relay Which Meets the Bell-Core Requirements for 2.5KV Coil-Contact Isolation Surge withstand of 2.5KV for 2x10µs meets Bell–Core requirements. Dielectric Strength of 1,500 VAC. Low coil power consumption 140 mW – 200 mW. Very small footprint with a maximum height of 11mm. Fully sealed construction. UL and CSA approved.
Ordering Information
Contact form Contac ttype Contact Material Structure G6N–2Y DPDT Bifucated crossbar Ag+Au clad Plastic sealed Model Number Legend: 1. Relay Function None:Single-side stable 2. Contact Form 2: DPDT 3. Classification Y: High dielectric withstand 4. Rated Coil Voltage 4.5, 5, 6, 9, 12, 24 VDC G6N - - VDC 12 3 4 Specifications Coil Ratings (G6N-2-Y) Rated voltage 4.5 VDC 5 VDC 6 VDC 9 VDC 12 VDC 24 VDC Coil resistance 145 Ω 178 Ω 257 Ω 579 Ω 1,028 Ω 2,880 Ω Must operate voltage 75% max. of rated voltage Must release voltage 10% min. of rated voltage Max. voltage 200% of rated voltage at 23/C0095C, 140% at 70/C0095C 170% of rated voltage at 23/C0095C, 120% at 70/C0095C Power consumption Approx. 140 mW Approx. 200 mW Note: 1. The rated current and coil resistance are measured at a coil temperature of 23/C0095C with a tolerance of +10%. 2. Operating characteristics are measured at a coil temperature of 23/C0095C.
Load Resistive load (cos∅ = 1) Rated load 0.5 A at 125 VAC; 1 A at 30 VDC Contact material Ag (Au-clad) Rated carry current 2 A Max. switching voltage 250 VAC, 220 VDC Max. switching current 1.25 A Max. switching capacity 62.5 VA, 30 W Min. permissible load 10 µA at 10 mVDC Note: P level: λ60 = 0.1 x 10-6/operation Characteristics Contact resistance 50 mΩ max. Operate time 5 ms max. (mean value: approx. 2.5 ms) Release time 3 ms max. (mean value: approx. 1.5 ms) Bounce time Operate:Approx. 0.5 ms Release:Approx. 0.5 ms Set/reset:Approx. 0.5 ms Max. operating frequency Mechanical:36,000 operations/hr Electrical:1,800 operations/hr (under rated load) Insulation resistance 1,000 MΩ min. (at 500 VDC) Dielectric withstand voltage 1,500 VAC, 50/60 Hz for 1 min between coil and contacts 1,000 VAC, 50/60 Hz for 1 min between contacts of different polarity 1,000 VAC, 50/60 Hz for 1 min between contacts of same polarity Impulse withstand voltage 2,500 V 2 x 10 µs between coil and contacts 1,500 V 10 x 160 µs between contacts of same polarity (conforms to FCC Part 68) Vibration resistance Destruction:10 to 55 Hz, 5-mm double amplitude Malfunction:10 to 55 Hz, 3-mm double amplitude Shock resistance Destruction:1,000 m/s2 (approx. 100G) Malfunction:500 m/s2 (approx. 50G) Life expectancy Mechanical:100,000,000 operations min. (at 36,000 operations/hr) Electrical:300,000 operations min. (1 A at 30 VDC, resistive load) 200,000 operations min. (0.5 A at 125 VAC, resistive load) Ambient temperature Operating: –40/C0095C to 70/C0095C (with no icing) Storage: –40/C0095C to 70/C0095C (with no icing) Ambient humidity Operating: 35% to 85% Weight Approx. 3 g Approved Standards Model Contact form Coil ratings Contact ratings G6N-2-Y DPDT 4.5 to 48 VDC 2 A, 30 VDC
0.3 A, 110 VDC
0.5 A, 125 VAC
Max. Switching Capacity Ambient Temperature vs. Maximum Voltage Single-side Stable (G6N-2-Y) Life Expectancy Switching current (A) Switching voltage (V) Switching current (A) Life expectancy (x10 operations)3 Ambient temperature (/C0095C) Maximum voltage (%) 3 to 12 VDC
24 VDC
10,000 7,000 5,000 3,000 1,000 700 500 300 100 0.7 0.5 0.3 0.1 10 30 50 70100 300 700 1,000 DC resistive load AC resistive load Dimensions Note: 1. Orientation marks are indicated as follows: Terminal Arrangement/ Internal Connections (Bottom View) Mounting Holes (Bottom View) Tolerance: +0.1 13 4 5 891012 11 max. (10.8) 15 max. (14.8) 7.5 max. (7.3) 0.5 (terminals 1 and 12) 0.25 (terminals 3, 4, 5, 8, 9, 10) 0.55 2.95 0.25 5.08 2.54 0.5 2.54 5.08 2.54 2.54 5.08+0.1 (1.11) (1.05) 10.16+0.1 Eight, 1.0-dia.