G6K OMRON | Alldatasheet
Document overview
- Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
- PDF pages: 10
Technical content
G6K Surface Mounting Relay Surface Mounting Relay with the World’s Smallest Mounting Area and a Height of Only 5.2 mm ■ Subminiature model as small as 5.2 (H) x 6.5 (W) x 10 (L) mm is ideal for high-density mounting. ■ Low profile of 5.2 mm and weight of only 0.7 g combine to improve mounting efficiency. ■ Models with inside-L surface mounting terminals are available. ■ Consumes approximately 70% the power of a conventional OMRON model and operates at a current that is as low as 100 mW. ■ Surface mounting terminal models incorporate a unique terminal structure with high infrared irradi- ation efficiency which allows the terminal temper- ature to rise easily when mounting the IRS, thus ensuring excellent soldering. ■ Ensures a dielectric strength of 1,500 VAC and conforms to FCC Part 68 (i.e., withstanding an impulse withstand voltage of 1,500 V for 10 x 160 µs). ■ New-Y models offer an impulse withstand voltage of 2,500 V for 2 x 10 µs (conforms to Telcordia specifications) by optimizing the distance between coil and contacts. ■ Conforms to UL1950 (File No. E41515)/CSA C22.2 No. 950 (File No. LR24825) The above specifications are ensured as of August 1999.
Ordering Information
- Relay function None: Single-side stable model U: Single-winding latching model 2. Contact form 2: DPDT 3. Terminal shape F: Outside-L surface mounting terminal G: Inside-L surface mounting terminal P: PCB terminal 4. Approved standards None: UL, CSA Does not conform to Telcordia specifications Y: UL, CSA Conforms to Telcordia specifications: 2,500 V for 2 x 10 µs 5. Rated Coil Voltage 3, 4.5, 5, 12, 24 VDC RoHS Compliant Refer to pages 16 to 17 for details. RC Classification Single-side stable Single-winding latching Single-side stable Bellcore: 2, 500 V for 2x10 µs DPDT Fully sealed PCB terminal G6K-2P G6KU-2P-Y G6K-2P-Y Surface mounting terminal Inside-L G6K-2G G6KU-2G-Y G6K-2G-Y Outside-L G6K-2F G6KU-2F-Y G6K-2F-Y Rated coil voltage Note: 1. When ordering, add the rated coil voltage to the model number. Example: G6K-2F 12 VDC 2. When ordering tape packing, add -TR" to the model number. Example: G6K-2F-TR 12 VDC Be sure since -TR" is not part of the relay model number, it is not marked on the relay case. Tape packing 1 2 3 4 5
Telephones, communications equipment, measurement devices, office automation machines, and audio–visual products. Specifications Contact mechanism:Bifurcated crossbar Ag (Au-alloy contact) Enclosure ratings:Fully sealed ■ Coil Ratings Single-side Stable Models G6K-2F, G6K-2G, G6K-2P Note: 1. The rated current and coil resistance are measured at a coil temperature of 23 °C with a tolerance of ±10%. 2. The operating characteristics are m easured at a coil temperature of 23 °C. 3. The maximum voltage is the highest voltage that can be imposed on the relay coil instantaneously. Single-side Stable Models (Bellcore Version) G6K-2F-Y, G6K-2G-Y, G6K-2P-Y Note: 1. The rated current and coil resistance are measured at a coil temperature of 23 °C with a tolerance of ±10%. 2. The operating characteristics are m easured at a coil temperature of 23 °C. 3. The maximum voltage is the highest voltage that can be imposed on the relay coil instantaneously. Single-winding Latching Models (Bellcore Version) G6KU-2F-Y, G6KU-2G-Y, G6KU-2P-Y Note: 1. The rated current and coil resistance are measured at a coil temperature of 23 °C with a tolerance of ±10%. 2. The operating characteristics are m easured at a coil temperature of 23 °C. 3. The maximum voltage is the highest voltage that can be imposed on the relay coil instantaneously. Rated voltage 3 VDC 4.5 VDC 5 VDC 12 VDC Rated current 33.0 mA 23.2 mA 21.1 mA 9.1 mA Coil resistance 91 Ω 194 Ω 237 Ω 1,315 Ω Must operate voltage 80% max. of rated voltage Must release voltage 10% min. of rated voltage Max. voltage 150% of rated voltage at 23°C to 70°C Power consumption Approx. 100 mW Rated voltage 3 VDC 4.5 VDC 5 VDC 12 VDC 24 VDC Coil resistance 91 Ω 194 Ω 237 Ω 1,315 Ω 5,220 Ω Must operate voltage 80% max. of rated voltage Must release voltage 10% min. of rated voltage Max. voltage 150% of rated voltage at 23°C to 70°C Power consumption Approx. 100 mW Rated voltage 3 VDC 4.5 VDC 5 VDC 12 VDC 24 VDC Coil resistance 91 Ω 194 Ω 237 Ω 1,315 Ω 5,220 Ω Must set voltage 75% max. of rated voltage Must reset voltage 75% max. of rated voltage Max. voltage 150% of rated voltage at 23°C to 70°C Power consumption Approx. 100 mW
■ Contact Ratings ■ Characteristics Note: The above values are initial values. Note: 1. The contact resistance was measured with 10 mA at 1 VDC with a voltage-drop method. 2. Values in parentheses are actual values. 3. The insulation resistance was measured with a 500-VDC megohmme ter applied to the same parts as those used for checking the dielectric strength. 4. This value was measured at a switching frequency of 120 operations/min and the criterion of contact resistance is 50 Ω. This value may vary depending on the switching frequency and operating environment. Always double-check relay suitability under actual operating conditions. Load Resistive load Rated load 0.3 A at 125 VAC; 1 A at 30 VDC Rated carry current 1 A Max. switching voltage 125 VAC, 60 VDC Max. switching current 1 A Item Single-side stable models (double-pole) Single-winding latching model G6K-2F, G6K-2G, G6K-2P G6K-2F-Y, G6K-2G-Y, G6K-2P-Y G6KU-2F-Y, G6KU-2G-Y, G6KU-2P-Y Contact resistance (See note 1.) 100 m Ω max. Insulation resistance (See note 3.) 1,000 MΩ min. (at 500 VDC) Dielectric strength Coil and contacts 1,500 VAC, 50/60 Hz for 1 min Contacts of different polarity 1,000 VAC, 50/60 Hz for 1 min Contacts of same po- larity
750 VAC, 50/60 Hz for 1 min
Coil and contacts 1,500 V (10 x 160 µs) 2,500 V (2 x 10 µs), 1,500 V (10 x 160 µs) Contacts of different polarity 1,500 V (10 x 160 µs) Contacts of same po- larity Vibration resistance Destruction: 10 to 55 Hz, 2.5-mm single amplitude (5-mm double amplitude) and 55 to 500 Hz, 300 m/s 2 (approx. 30G) Malfunction: 10 to 55 Hz, 1.65-mm single amplitude (3.3-mm double amplitude) and 55 to 500 Hz, 200 m/s2 (approx. 20G) Shock resistance Destruction: 1,000 ms2 (approx. 100G) Malfunction: 750 ms2 (approx. 75G) Endurance Mechanical: 50,000,000 operations min. (at 36,000 operations/hour) Electrical: 100,000 operations min. (with a rated load at 1,800 operations/hour) Failure rate (P level) (See note 4.) 10 µA at 10 mVDC Ambient temperature Operating: −40°C to 70°C (with no icing or condensation) Ambient humidity Operating: 5% to 85% Weight Approx. 0.7 g
Maximum Switching Power Ambient Temperature vs. Maximum Coil Voltage Ambient Temperature vs. Switching Current Switching current (A) Maxim um coil voltage ( Switching current (A) DC resistive load Switching voltage (V) Ambient temperature (°C) Ambient temperature (°C) AC resistive load Note: The maximum coil voltage refers to the maxi mum value in a varying range of operating power voltage, not a continuous voltage. Endurance Ambient Temperature vs. Must Operate or Must Release Voltage G6K-2G (F/P), G6K-2G (F/P)-Y Switching operations (x10 operations) On the basis of r ated voltage (%) Switching current (A)
125 VAC resistive load
Ambient temperature: 23°C Switching frequency: 1,800 operations/hour Ambient temperature (°C)
30 VDC resistive load
Ambient temperature: 23°C Switching frequency: 1,800 operations/hour Max. estimated value Must operate voltage Must release voltage Ambient Temperature vs. Must Set or Must Reset Voltage G6KU-2G (F/P)-Y On the basis of r ated voltage (%) Ambient temperature (°C) Max. estimated value Electrical Endurance (with Must Operate and Must Re lease Voltage) (See note.) G6K-2G (F/P), G6K-2G (F/P)-Y Electrical Endurance (Contact Resistance) (See note.) G6K-2G (F/P), G6K-2G (F/P)-Y Contact resist ance (m Operating frequency (x10 operations) On the basis of r ated voltage (%) Operating frequency (x10 operations) Must operate Must release Sample: G6K-2G Sample: G6K-2G Test conditions: 1 A resistive load NO contact NC contact Contact resistance Shock Malfunction Energized Not energized Shock direction Unit: m/s Sample: G6K-2G Number of Relays: 10 Conditions: Shock is applied in ±X, ±Y , and ±Z di rections three times each with and with out energizing the Relays to check the number of contact malfunctions. 3 Switching frequency: 1,800 operations/h Number of Relays: 10 Test conditions: 1 A resistive load at
30 VDC with an operation rate of 50%
Number of Relays: 10 at 30 VDC with an operation rate of 50% Switching frequency: 1,800 operations/h Note: The tests were conducted at an ambient temperature of 23˚C. Note: The tests were conducted at an ambient temperature of 23˚C.
Note: 1. The tests were conducted at an ambient temperature of 23 °C. 2. High-frequency characteristics depend on the PCB to which the Relay is mounted. Always check these characteristics including endurance in the actual machine before use. Sample Not energized Sample Energized Must operate voltage Must release voltage Initial stage Test Average value Initial stage Test Average value Sample Not energized Sample Energized Initial stage Test Average value Initial stage Test Average value Change rate on the basisof initial v alue (% Change rate on the basisof initial v alue (% Change rate on the basisof initial value (% Change rate on the basisof initial v alue (% Must operate voltage Must release voltage Contact Reliability Test (See note.) G6K-2G (F/P), G6K-2G (F/P)-Y Operating frequency (x10 operations) Note 1: The test was conducted at an ambient temperature of 23°C. Sample: G6K-2G Number of Relays: 10 Test conditions: 10 mA resistive load at 10 mVDC with an operation rate of 50 % Switching frequency: 7,200 operations/h Contact resista nce (m ) Ω NO contact NC contact External Magnetic Interference G6K-2G (F/P), G6K-2G (F/P)-Y (Average value) Change rate on the basis of in itial value (%) Sample: G6K-2G Number of Relays: 10 Must operate voltage Must release voltage External magnetic field (A/m) (Average value) Change rate on the basis of initial value (%) Sample: G6K-2G Number of Relays: 10 Must operate voltage Must release voltage External magnetic field (A/m) (Average value) Change rate on the basis of in itial value (%) Sample: G6K-2G Number of Relays: 10 External magnetic field (A/m) High-frequency Characteristics (Isolation) G6K-2G (F/P), G6K-2G (F/P)-Y (Average value) (Average value) Insertion loss (dB) (Average value) Return loss (dB) Frequency (MHz) Frequency (MHz) High-frequency Characteristics (Insertion Loss) G6K-2G (F/P), G6K-2G (F/P)-Y High-frequency Characteristics (Return Loss) G6K-2G (F/P),G6K-2G (F/P)-Y Mutual Magnetic Interference G6K-2G (F/P), G6K-2G (F/P)-Y Mutual Magnetic Interference G6K-2G (F/P), G6K-2G (F/P)-Y Must operate voltage Must release voltage Isolation (dB) Frequency (MHz) 2: The contact resistance data are periodically measured reference values and are not values from each monitoring operation. Contact resistance values will vary according to the switching frequency and operating environment, so be sure to check operation under the actual operating conditions before use. Sample: G6K-2G Number of Relays: 10 0.1 0.2 0.3 0.4 0.5 1 10 100 Sample: G6K-2G Number of Relays: 10 1 10 100 Sample: G6K-2G Number of Relays: 10 Return loss V.SWR 100 1.4 1.35 1.3 1.25 1.2 1.15 1.1 1.05 V.SWR 1 10 100
Note: All units are in millimeters unless otherwise indicated. ■ DPDT Must Operate and Must Release Time Distribution (See note.) G6K-2G (F/P), G6K-2G (F/P)-Y Number of contacts Sample: G6K-2G Number of Relays: Time (ms) Sample: G6K-2G Number of Relays: 50 Change rate on the basis of rated value (%) After test Must Operate and Must Release Bounce Time Distribution (See note.) G6K-2G (F/P) , G6K-2G (F/P)-Y Vibration Resistance G6K-2G (F/P), G6K-2G (F/P)-Y Number of contacts Note: The tests were conducted at an ambient temperature of 23°C. Must operate bounce time Must operate voltage Must release voltage Time (ms) Must release bounce time Must operate Must release time G6K-2F Mounting Dimensions (Top View) Terminal Arrangement/ Internal Connections (Top View) Orientation mark Note: Each value has a tolerance of ±0.3 mm. G6K-2G Mounting Dimensions (Top View) Terminal Arrangement/ Internal Connections (Top View) Orientation markNote: Each value has a tolerance of ±0.3 mm. Tolerance: ±0.1 mm Tolerance: ±0.1 mm G6K-2P Mounting Dimensions (Bottom View)Terminal Arrangement/ Internal Connections (Bottom View) Orientation mark Note: Each value has a tolerance of ±0.3 mm. Eight, 0.8-dia. holes Tolerance: ±0.1 mm
Mounting Dimensions (Top View) Terminal Arrangement/ Internal Connections (Top View) Orientation mark Note: Each value has a tolerance of ±0.3 mm. Mounting Dimensions (Top View) Terminal Arrangement/ Internal Connections (Top View) Orientation mark Note: Each value has a tolerance of ±0.3 mm. Tolerance: ±0.1 mm Tolerance: ±0.1 mm Mounting Dimensions (Bottom View) Terminal Arrangement / Internal Connections (Bottom View) Orientation mark Note: Each value has a tolerance of ±0.3 mm. Eight, 0.8-dia. holes Tolerance: ±0.1 mm G6KU-2F-Y G6KU-2G-Y G6KU-2P-Y Mounting Dimensions (Top View) Terminal Arrangement/ Internal Connections (Top View) Orientation mark Note: Each value has a tolerance of ±0.3 mm. Mounting Dimensions (Top View) Terminal Arrangement/ Internal Connections (Top View) Orientation markNote: Each value has a tolerance of ±0.3 mm. Tolerance: ±0.1 mm Tolerance: ±0.1 mm Mounting Dimensions (Bottom View) Terminal Arrangement / Internal Connections (Bottom View) Orientation mark Note: Each value has a tolerance of ±0.3 mm. Eight, 0.8-dia. holesTolerance: ±0.1 mm
Stick Packing and Tape Packing Stick Packing Relays in stick packing are arranged so that the orientation mark of each Relay in on the left side. Fifty Relays are packed on one stick. Be sure not to make mistakes in Relay orientation when mounting the Relay to the PCB. Stick length: 520 mm (stopper not included) No. of Relays per stick: 50 Tape Packing (Surface Mounting Terminal Models) When ordering Relays in tape packing, add the prefix “-TR” to the model number, otherwise the Relays in stick packing will be pro- vided. Tape Type:ETX7200 (EIAJ (Electronic Industrial Association of Japan)) Reel type:RPM-16D (EIAJ) Relays per Reel: 900 Stopper (gray) Orientation of Relays Stopper (green) 1. Direction of Relay Insertion 2. Reel Dimensions 3. Carrier Tape Dimensions Top tape (cover tape) Carrier tape Pulling direction Orientation mark Pulling direction G6K-2F , G6K-2F-Y , G6KU-2F-Y G6K-2G, G6K-2G-Y , G6KU-2G-Y Emboss tape
Recommended Soldering Method Temperature indicate the surface temperature of the PCBs. IRS Method (for surface mounting terminal models) (1) IRS Method (Mounting Solder: Lead) (2) IRS Method (Mounting Solder: Lead-free) The thickness of cream solder to be applied should be within a range between 150 and 200 µm on OMRON’s recommended PCB pattern. In order to perform correct soldering, it is recommended that the correct soldering conditions be maintained as shown below on the left side. Visually check that the Relay is properly soldered. Approved Standards UL approval:UL1950 (File No. E41515) CSA approval:C22.2 No. 950 (File No. LR31928) Temperature (°C) Soldering Preheating Time (s) 220 to 245 180 to 200 150 90 to 120 20 to 30 Temperature (°C) Soldering Preheating Time (s) Upper surface of case (peak): 255˚C max. 120 max. 30 max. 250 max. 230 180 150 Note: The temperature profile indicates the temperature of the relay terminal section. Relay terminal section Contact form Coil rating Contact rating Number of test operations DPDT G6K-2G(F/P): 3 to 12 VDC G6K(U)-2G(F/P)-Y: 3 to 24 VDC
1 A at 30 VDC
0.5 A at 60 VDC
0.3 A at 125 VAC
6,000 Correct Soldering Incorrect Soldering PCB Terminal Solder Relay Land Excessive amount of solder Insufficient amount of solder
Refer to page 25 for information on general precautions. Be sure to read these precautions before using the Relay. Correct Use Long-term Continuously ON Contacts Using the Relay in a circuit where the Relay will be ON continu- ously for long periods (without switching) can lead to unstable contacts because the heat generated by the coil itself will affect the insulation, causing a film to develop on the contact surfaces. We recommend using a latching relay (magnetic-holding relay) in this kind of circuit. If a single-side stable model must be used in this kind of circuit, we recommend using a fail-safe circuit design that provides protection against contact failure or coil burnout. Relay Handling Use the Relay as soon as possible after opening the moisture- proof package. If the Relay is left for a long time after opening the moisture-proof package, the appearance may suffer and seal fail- ure may occur after the solder mounting process. To store the Relay after opening the moisture-proof package, place it into the original package and sealed the package with adhesive tape. When washing the product after soldering the Relay to a PCB, use a water-based solvent or alcohol-based solvent, and keep the solvent temperature to less than 40°C. Do not put the Relay in a cold cleaning bath immediately after soldering. Soldering Soldering temperature: Approx. 250°C (260°C if the DWS method is used) Soldering time: Approx. 5 s max. (approx. 2 s for the first time and approx. 3 s for the second time if the DWS method is used) Be sure to adjust the level of the molten solder so that the solder will not overflow onto the PCB. Claw Securing Force During Automatic Mounting During automatic insertion of Relays, make sure to set the secur- ing force of each claw to the following so that the Relays charac- teristics will be maintained. Environmental Conditions During Operation, Storage, and Transportation Protect the Relay from direct sunlight and keep the Relay under normal temperature, humidity, and pressure. If the Relay is stored for a long time in an adverse environment with high temperature, high humidity, organic gases, or sulfide gases, sulfide or oxide films will form on the contact surfaces. These films may result in unstable contact, contact problems, or functional problems. Therefore, operate, store, or transport the product under specified environmental conditions. Latching Relay Mounting Make sure that the vibration or shock that is generated from other devices, such as relays in operation, on the same panel and imposed on the Latching Relay does not exceed the rated value, otherwise the Latching Relay that has been set may be reset or vice versa. The Latching Relay is reset before shipping. If exces- sive vibration or shock is imposed, however, the Latching Relay may be set accidentally. Be sure to apply a reset signal before use. Maximum Allowable Voltage The maximum allowable voltage of the coil can be obtained from the coil temperature increase and the heat-resisting temperature of coil insulating sheath material. (Exceeding the heat-resisting temperature may result in burning or short-circuiting.) The maxi- mum allowable voltage also involves important restrictions which include the following: Must not cause thermal changes in or deterioration of the insu- lating material. Must not cause damage to other control devices. Must not cause any harmful effect on people. Must not cause fire. Therefore, be sure to use the maximum allowable voltage beyond the value specified in the catalog. As a rule, the rated voltage must be applied to the coil. A voltage exceeding the rated value, however, can be applied to the coil provided that the voltage is less than the maximum allowable volt- age. It must be noted that continuous voltage application to the coil will cause a coil temperature increase thus affecting charac- teristics such as electrical life and resulting in the deterioration of coil insulation. Coating The Relay mounted on the PCB may be coated or washed but do not apply silicone coating or detergent containing silicone, other- wise the silicone coating or detergent may remain on the surface of the Relay. PCB Mounting If two or more Relays are closely mounted with the long sides of the Relays facing each other and soldering is performed with infrared radiation, the solder may not be properly exposed to the infrared rays. Be sure to keep the proper distance between adja- cent Relays as shown below. Two or more Relays may be closely mounted with the short sides of the Relays facing each other. Direction A: 1.96 N Direction B: 4.90 N Direction C: 1.96 N G6K-2G G6K-2F 2 mm min. 2.7 mm min. ALL DIMENSIONS SHOWN ARE IN MILLIMETERS. To convert millimeters into inches, multiply by 0.03937. To convert grams into ounces, multiply by 0.03527. Cat. No. K106-E1-04