G6J-2FL-Y

G6J-Y OMRON | Alldatasheet

Document overview

• Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
• PDF pages: 12

Technical content

Surface-mounting Relay G6J-Y 57 Surface-mounting Relay G6J-Y Ultra-compact and Slim DPDT Relay

• Dimensions of 9H x 5.7W x 10.6L mm provide a mounting area reduction of approx. 56% when compared with the OMRON G6S.  Dielectric strength of 1,500 VAC and an impulse withstand voltage of 2,500 V for 2 x 10 μs (conforms to Telcordia specifications (formerly Bellcore)).  Conforms to FCC Part 68 requirments (1,500 V,10 x 160 μs).  Single-winding latching models to save energy.  UL recognized / CSA certified.  RoHS Compliant.

Ordering Information

Model Number Legend: Application Examples Communications equipment, measurement devices, computer peripheral devices, office automation equipment, and audio-visual products. Item Model Terminal Contact form Non-latching Single coil latching PCB through-hole DPDT G6J-2P-Y G6JU-2P-Y SMT Gull-wing G6J-2FL-Y G6JU-2FL-Y SMT Shortened leads G6J-2FS-Y G6JU-2FS-Y Rated coil voltage Note 1: When ordering, add the rated coil voltage to the model number. Example: G6J-2P-Y DC12 Rated coil voltage Note 2: When ordering tape packing, add “-TR” to the model number. “-TR” is not part of the relay model number. Therefore it is not marked on the relay case. Example: G6J-2P-Y -TR DC12 1. Relay Function None: Non-latching, standard U: Single-winding latching 2. Contact Form 2: DPDT 3. Terminal Shape P: PCB through-hole terminals FL: SMT Gull-wing FS: SMT shortened leads 4. Packaging None: Tube packaging TR: Tape and reel packaging 9. Rated Coil Voltage 3, 4.5, 5, 12, 24 G6J - - Y - DC 2 3 4 51

58 Surface-mounting Relay G6J-Y

■Contact Data Note: This value was measured at a switching frequency of 120 operations/min and the criterion of contact resistance is 5% of the load impedance. This value may vary depending on the operating frequency, operating conditions, expected reliability level of the relay, etc. Always double- check relay suitability under actual load conditions. ■Coil Data G6J-Y Standard, Non-latching (G6J-2P-Y, G6J-2FS-Y, G6J-2FL-Y) Note: 1. The rated current and coil resistance are measured at a coil temperature of 23°C with a tolerance of ±10%. 2. The operating characteristics are measured at a coil temperature of 23°C. 3. The maximum voltage is the highest voltage that can be imposed on the Relay coil instantaneously. G6JU-Y Single coil, Latching (G6JU-2P-Y, G6JU-2FL-Y, G6JU-2FS-Y) Note: 1. The rated current and coil resistance are measured at a coil temperature of 23°C with a tolerance of ±10%. 2. The operating characteristics are measured at a coil temperature of 23°C. 3. The maximum voltage is the highest voltage that can be imposed on the Relay coil instantaneously. Rated load 0.3 A @ 125 VAC

1 A @ 30 VDC

Contact material Ag (Au Clad) Max. carry current 1 A Max. operating voltage 125 VAC, 110 VDC Max. operating current 1 A Max. switching capacity 37.5 VA, 30 W Min. permissible load (see note) 10m VDC, 10μA Rated voltage (VDC) Rated current (mA) Coil resistance (Ω) Pick-up voltage Drop-out voltage Max. voltage Power consumption (mW) % of rated voltage 4.5 32.6 137.9 5 28.9 173.1 12 12.3 976.8 24 9.2 2,600.5 230 Rated voltage (VDC) Rated current (mA) Coil resistance (Ω) Set voltage Reset voltage Max. voltage Power consumption (mW)% of rated voltage 4.5 22.0 204.3 5 20.4 245.5 12 9.0 1,329.2

Surface-mounting Relay G6J-Y 59 ■Characteristics Note: 1. The contact resistance was measured with 10 mA at 1 VDC with a fall-of-potential method. 2. Values in parentheses are typical values unless otherwise stated. 3. The insulation resistance was measured with a 500-VDC Megger Tester applied to the same parts as those for checking the dielectric strength. 4. The above values are initial values. Item Standard non-latching relays Single coil latching relays G6J-2P-Y, G6J-2FS-Y, G6J-2FL-Y G6JU-2P-Y, G6JU-2FS-Y, G6JU-2FL-Y Contact resistance (See note 1) 100 mΩ max. Operating (set) time (See note 2) 3 ms max. (approx. 1.6 ms) Minimum set/reset pulse width --- 10 ms min. (at 100% rated coil voltage) Insulation resistance (See note 3) 1,000 MΩ min. (at 500 VDC) Dielectric strength 1,500 VAC, 50/60 Hz for 1 min. between coil and contacts 1,000 VAC, 50/60 Hz for 1 min. between contacts of different polarity 750 VAC, 50/60 Hz for 1 min. between contacts of the same polarity Surge withstand voltage 2,500 VAC, (2 x 10 μs) between coil and contacts 1,500 VAC, (10 x 160 μs) between contacts of the same and different polarity Vibration Mechanical durability 10 to 55 Hz, 5-mm double amplitude Malfunction durability 10 to 55 Hz, 3.3-mm double amplitude Shock Mechanical durability 1,000 m/s2 (approx. 100G) Malfunction durability 750 m/s2 (approx. 75G) Service life Mechanical 50,000,000 operations min. (at 36,000 operations/hour) Electrical 100,000 operations min. (with a rated load at 1,800 operations/hour) Ambient temperature −40 to 85°C with no icing or condensation Humidity 5% to 85% RH Weight Approx. 1.0 g

60 Surface-mounting Relay G6J-Y

Switching voltage (V) Switching current (A) 0.1 1 3 5 10 30 50 100 300 500 1,000 0.7 0.5 0.3 AC resistive load DC resistive load Ambient temperature (°C) −40 −20 0 20 40 60 80 100 250 200 150 100 Maximum voltage (%) −40 −20 0 20 40 60 80 100 1.2 0.8 0.6 0.4 0.2 Ambient temperature (°C) Switching current (A) Maximum Switching Capacity Ambient Temperature vs. Maximum Voltage Ambient Temperature vs. Switching Current Note: “Maximum voltage” is the maximum voltage that can be applied to the Relay coil. 1,000 500 300 100 Switching current (A)

30 VDC resistive load

Ambient temperature: 23°C Switching frequency: 1,800 operations/hour

125 VAC resistive load

Ambient temperature: 23°C Switching frequency: 1,800 operations/hour Switching operations (x104 operations) max. avg. min. avg. min. max. Maximum estimated value 100 −60 −40 −20 0 20 40 60 80 100 Ambient temperature (°C Operating voltage Release voltage Change rate on the basis of rated voltage (%) Z Y X 200 400 600 800 1,000 1,000 1,0001,000 1,000 800 600 400 200 1,000 Shock directions Unit: m/s Sample: G6J-2P-Y Number of Relays: 10 XX ' Not energized Energized Z Y Electrical Life Expectancy Ambient Temperature vs. Must Operate or Must Release Voltage Shock Malfunction Conditions: Shock is applied in ±X, ±Y , and ±Z directions three times each with and without energizing the Relays to check the number of contact malfunctions. 0.001 0.01 0.1 1 10 100 1,000 Operating frequency (x103 operations) 100 max. min. max. min. Release voltage Operate voltage On the basis of rated voltage (%) Sample: G6J-2P-Y Number of Relays: 10 Test conditions: 1-A resistive load at

30 VDC with an operation rate of 50%

Switching frequency: 1,800 operations/hour Operating frequency (x103 operations) Contact resistance (mΩ) 0.001 0.01 0.1 1 10 100 1,000 NO contact NC contact 1,000 500 300 100 max. min. min. max. Contact resistance Sample: G6J-2P-Y Number of Relays: 10 Test conditions: 1-A resistive load at 30 VDC with an operation rate of 50% Switching frequency: 1,800 operations/hour Operating frequency (x105 operations) Contact resistance (mΩ) 0.001 0.01 0.1 1 10 100 1,000 1,000 500 300 100 max. min. min. max. Sample: G6J-2P-Y Number of Relays: 10 Test conditions: 10 μA resistive load at 10 m VDC with an operation rate of 50% Switching frequency: 7,200 operations/hour Contact resistance NO contact NC contact Electrical Life Expectancy (with Must Operate and Must Release Voltage) (See note.) Electrical Life Expectancy (Contact resistance) (See note.) Contact Reliability Test (See note.) Note: 1. The tests were conducted at an ambient temperature of 23°C. 2. The contact resistance data are periodically measured reference values and are not values from each monitoring operation. Contact resistance values will vary according to the switching frequency and operating environment, so be sure to check operation under the actual operating conditions before use

Surface-mounting Relay G6J-Y 61 Set voltage Reset voltage Installed in flush configuration Initial stage +30 +20 +10 −10 −20 −30 Average value +30 +20 +10 −10 −20 −30 Energized Sample Not energized Sample Change rate on the basis of initial value (%) Change rate on the basis of initial value (%) Installed in flush configuration Initial stage Average value +30 +20 +10 −10 −20 −30 +30 +20 +10 −10 −20 −30 Change rate on the basis of initial value (%) Change rate on the basis of initial value (%) Not energized Energized Sample Sample Set voltage Reset voltage Installed in flush configuration Initial stage Average value Installed in flush configuration Initial stage Average value Mutual Magnetic Interference Mutual Magnetic Interference −1,200 −800 −400 0 400 800 1,200 Change rate on the basis of initial value (%) +30 +20 +10 −10 −20 −30 External magnetic field (A/m) Average value Sample: G6J-2P-Y Number of Relays: 5 SN Must Operate voltage Must Release voltage Change rate on the basis of initial value (%) +30 +20 +10 −10 −20 −30 External magnetic field (A/m) Average value −1,200 −800 −400 0 400 800 1,200 SN Sample: G6J-2P-Y Number of Relays: 5 Must Operate voltage Must Release voltage Change rate on the basis of initial value (%) +30 +20 +10 −10 −20 −30 External magnetic field (A/m) Average value −1,200 −800 −400 0 400 800 1,200 SN Sample: G6J-2P-Y Number of Relays: 5 Must Operate voltage Must Release voltage Average value 100 1 10 100 1,000 1 pole 2 poles Frequency (MHz) Isolation (dB) Average value Frequency (MHz) Insertion Loss (dB) 0.5 1.5 2.5 1 10 100 1,000 1 pole 2 poles Average value Frequency (MHz) Return loss (dB) 3.5 2.5 1.5 0.5 1 10 100 1,000 1-pole V.SWR 2-pole V.SWR 1-pole return loss 2-pole return loss V.SWR External Magnetic Interference High-frequency Characteristics (Isolation) High-frequency Characteristics (Insertion Loss) High-frequency Characteristics (Return Loss, V.SWR) Note: 1. The tests were conducted at an ambient temperature of 23°C. 2. High-frequency characteristics depend on the PCB to which the Relay is mounted. Always check these characteristics, including endurance, in the actual machine before use.

62 Surface-mounting Relay G6J-Y

0 0.5 1 1.5 2 2.5 3 Time (ms) Sample: G6J-2P-Y Number of Relays: 30 Must Operate time Must Release time Number of contacts Time (ms) Number of contacts 0 0.5 1 1.5 2 2.5 3 Sample: G6J-2P-Y Number of Relays: 30 Must Operate bounce time Must Release bounce time After Change rate on the basis of rated value (%) Initial 5.0 4.0 3.0 2.0 1.0 0.0 −1.0 −2.0 −3.0 −4.0 −5.0 Must Operate voltage Must Release voltage Must Operate and Must Release Time Distribution (See note.) Note: The tests were conducted at an ambient temperature of 23°C. Must Operate and Must Release Bounce Time Distribution (See note.) Vibration Resistance Time (ms) Number of contacts 0 0.5 1 1.5 2 2.5 3 Sample: G6J-2P-Y Number of Relays: 30 Must Operate bounce time Must Release bounce time

Surface-mounting Relay G6J-Y 63 Dimensions Note: All units are in millimeters unless otherwise stated. A tolerance of ±0.3 (±0.01) applies to every dimension in the following drawings unless otherwise stated. 5.710.6 3.5 0.3 1.5 3.2 3.2 5.4 7.6 0.4 0.15 7.6 5.4 3.2 Eight, 0.85-dia. holes (1.25)(1.5) 3.2 12 3 4 87 6 5 SR 12 3 4 87 6 5 5.7 5.7 3.2 10.6 0.41.5 10.0 max. 3.2 5.4 7.6 7.6 5.4 3.2 4.35 0.8 (1.5) 2.35 SR 12 3 4 87 6 5 12 3 4 87 6 5 10.6 0.41.5 10.0 max. 3.2 5.4 7.6 5.7 7.4 3.2 7.6 5.4 3.2 5.2 0.8 (1.5) 3.2 SR 12 3 4 87 6 5 12 3 4 87 6 5 G6J-2P-Y G6JU-2P-Y Mounting Dimensions (Bottom View)* Terminal Arrangement Internal Connections (Bottom View) G6J-2P-Y Orientation mark G6JU-2P-Y Orientation mark G6J-2FS-Y G6JU-2FS-Y Mounting Dimensions (Top View)* Terminal Arrangement/ Internal Connections (Top View) G6J-2FS-Y Orientation mark G6JU-2FS-Y Orientation mark *Tolerance ±0.1 mm *Tolerance ±0.1 mm G6J-2FL-Y G6JU-2FL-Y Mounting Dimensions (Top View)* Terminal Arrangement/ Internal Connections (Top View) G6J-2FL-Y Orientation mark G6JU-2FL-Y Orientation mark*Tolerance ±0.1 mm

64 Surface-mounting Relay G6J-Y

Stick Packing and Tape Packing 1. Stick Packing Relays in stick packing are arranged so that the orientation mark of each Relay is on the left side. Always confirm that the Relays are in the correct orientation when mounting the Relays to the PCBs. Stick length: 555 mm (stopper not included) No. of Relays per stick: 50 2. Tape Packing (Surface-mounting Terminal Relays) When ordering Relays in tape packing, add the prefix “-TR” to the model number, otherwise the Relays in stick packing will be provided. Direction of Relay Insertion Reel Dimensions Carrier Tape Dimensions Tape type: TB2412R (EIAJ (Elect ronic Industrial Association of Japan)) Reel type: R24D (EIAJ (Electroni c Industrial Association of Japan)) Relays per reel: 400 Stopper (gray) Orientation of Relays Stopper (green) Pulling Direction Top tape (cover tape) Carrier tape Embossed tape Pulling direction Orientation mark 25.5±0.5 29.5±1 80330 A 21 dia.2±0.5 13±0.2 dia. ±0.5 Enlarged View of Section A 1.5 dia.+0.1 16±0.1 4±0.12±0.1 6.2±0.1 8.3±0.1 5° max. B BA A A-A Cross Section 24±0.2 11.1±0.1 6.3±0.1 10.2±0.1 0.4±0.051.75±0.1 5° max. 5° max. B-B Cross Section 11.5±0.1 G6J-2FS-Y, G6JU-2FS-Y G6J-2FL-Y, G6JU-2FL-Y 1.5 dia.+0.1 A-A Cross Section 5° max. B-B Cross Section 16±0.1 4±0.1 24±0.2 11.1±0.1 6.3±0.1 10.2±0.1 0.4±0.05 11.5±0.1 1.75±0.12±0.1 7.9±0.1 10±0.1 B BA A 5° max.5° max.

Surface-mounting Relay G6J-Y 65 Recommended Soldering Method IRS Method (for Surface-mounting Terminal Relays) Note: Temperatures are given for the surface of the terminal.

• The thickness of cream solder to be applied should be between 150 and 200 μm on OMRON's recommended PCB pattern.  In order to perform correct soldering, it is recommended that the correct soldering conditions be maintained as shown below on the left-hand side. Visually check that the Relay is properly soldered. ■Approved Standards UL Recognized (File No. E41515) / CSA Certified (File No. LR31928) - - Ambient Temp. = 40°C Surface of the relay terminal Temperature (°C) 250 max. 230 180

150 Preheating

Time (s) 120 max. 30 max. Soldering Top of cover (Peak): 255°C max. Correct Soldering Relay Ter minal SolderPCB Land Incorrect Soldering Insufficient amount of solder Excessive amount of solder Contact form Coil rating Contact ra ting Number of test operations DPDT G6J-2P-Y , 2FS-Y , 2FL-Y: 3 to 24 VDC G6JU-2P-Y , 2FS-Y , 2FL-Y: 3 to 24 VDC

1 A at 30 VDC (Resistive)

0.5 A at 60 VDC (Resistive)

0.3 A at 125 VAC (General purpose)

66 Surface-mounting Relay G6J-Y

Long Term Current Carrying Under a long-term current carrying without switching, the insulation resistance of the coil goes down gradually due to the heat generated by the coil itself. Furthermore, the contact resistance of the Relay will gradually become unstable due to the generation of film on the con- tact surfaces. A Latching Relay can be used to prevent these pro b- lems. When using a non-latching relay, the design of the fail-safe circuit provides protection against contact failure and open coils. Handling of Surface-mounting Relays Use the Relay as soon as possi ble after opening the moisture-proof package. If the Relay is left for a long time after opening the mois- ture-proof package, the appearance may suffer and seal failure may occur after the solder mounting process. To store the Relay after opening the moisture-proof package, pl ace it into the original pack- age and seal the package with adhesive tape. When washing the product after soldering the Relay to a PCB, use a water-based solvent or alcohol- based solvent, and keep the solvent temperature at less than 40°C. Do not put the relay in a cold cleaning bath immediately after soldering. Soldering Solder: JIS Z3282, H63A Soldering temperature: Approx. 250°C (At 260°C if the DWS method is used.) Soldering time: Approx. 5 s max. (Approx. 2 s for the first time and approx. 3 s for the second time if the DWS method is used.) Be sure to adjust the level of the molten solder so that the solder will not overflow onto the PCB. Claw Securing Force During Automatic Insertion During automatic insertion of Relays, make sure to set the securing force of the claws to the following values so that the Relay character- istics will be maintained. Environmental Conditions During Operation, Storage, and Transportation Protect the Relays from direct sunlight and keep the Relays under normal temperature, humidity, and pressure. Mounting Latching Relays The Latching Relays are reset before shipping. If excessive vibration or shock is imposed, however, the Latching Relays may be set acci- dentally. Be sure to apply a reset signal before use. Make sure that the vibration or shock that is generated by other devices on the same panel does not exceed the rated value of the Latching Relays. Maximum Voltage The maximum voltage of the coil can be obtained from the coil tem- perature increase and the heat-resisti ng temperature of coil insulat- ing sheath material. (Exceeding t he heat-resisting temperature may result in burning or short-circuiting.) The maximum voltage also involves important restrictions. Maximum voltage:  must not cause thermal changes or deterioration of the insulating material.  must not cause damage to other control devices.  must not cause any harmful effect on people.  must not cause fire. Therefore, be sure not to exceed the maximum voltage specified in the catalog. As a rule, the rated voltage must be applied to the coil. A voltage exceeding the rated value, however, can be applied to the coil pro- vided that the voltage is less than the maximum voltage. It must be noted that continuous voltage applicat ion to the coil will cause a coil temperature increase which could deteriorate the coil insulation, shorten the relay’s electrical life, or affect various characteristics of the relay. Coating Relays mounted on PCBs may be coated or washed. Do not apply coatings or detergents containing silicone. Other Handling Dropping the relay may impose excess shock that exceeds the spec- ifications. Do not use any relay that has been dropped. A C B Direction A: 4.90 N max. Direction B: 9.80 N max. Direction C: 9.80 N max. Secure the claws to the area indicated by shading. Do not attach them to the center area or to only part of the Relay.

Surface-mounting Relay G6J-Y Omron Electronic Components, LLC Terms and Conditions of Sales 1. Definitions : The words used herein are defined as follows. (a) Terms: These terms and conditions (b) Seller: Omron Electronic Com ponents LLC and its subsidiaries (c) Buyer: The buyer of Products, including any end user in section III through VI (d) Products: Products and/or services of Seller (e) Including: Including without limitation 2. Offer; Acceptance: These Terms are deemed part of all quotations, acknowledgments, invoices, purchase orders and other documents, whether electronic or in writing, relating to the sale of Products by Seller. Seller hereby objects to any Terms proposed in Buyer's purchase order or other documents which are inconsistent with, or in addition to, these Terms. 3. Distributor : Any distributor shall inform its customer of the contents after and including section III of these Terms. 1. Prices; Payment : All prices stated are current, subject to change without notice by Seller. Buyer agrees to pay the price in effect at the time the purchase order is accepted by Seller. Payments for Products received are due net 30 days unless otherwise stated in the invoice. Buyer shall have no right to set off any amounts against the amount owing in respect of this invoice. 2. Discounts : Cash discounts, if any, will apply only on the net amount of invoices sent to Buyer after deducting transportation charges, taxes and duties, and will be allowed only if (a) the invoice is paid according to Seller's payment terms and (b) Buyer has no past due amounts owing to Seller. 3. Interest : Seller, at its option, may charge Buyer 1.5% interest per month or the maximum legal rate, whichever is less, on any balance not paid within the stated terms. 4. Orders : Seller will accept no order less than 200 U.S. dollars net billing. 5. Currencies : If the prices quoted herein are in a currency other than U.S. dollars, Buyer shall make remittance to Seller at the then current exchange rate most favorable to Seller; provided that if remittance is not made when due, Buyer will convert the amount to U.S. dollars at the then current exchange rate most favorable to Seller available during the period between the due date and the date remittance is actually made. 6. Governmental Approvals : Buyer shall be responsible for all costs involved in obtaining any government approvals regarding the importation or sale of the Products. 7. Taxes : All taxes, duties and other governmental charges (other than general real property and income taxes), including any interest or penalties thereon, imposed directly or indirectly on Seller or required to be collected directly or indirectly by Seller for the manufacture, production, sale, delivery, importation, consumption or use of the Products sold hereunder (including customs duties and sales, excise, use, turnover and license taxes) shall be charged to and remitted by Buyer to Seller. 8. Financial : If the financial position of Buyer at any time becomes unsatisfactory to Seller, Seller reserves the right to stop shipments or require satisfactory security or payment in advance. If Buyer fails to make payment or otherwise comply with these Terms or any related agreement, Seller may (without liability and in addition to other remedies) cancel any unshipped portion of Products sold hereunder and stop any Products in transit until Buyer pays all amounts, including amounts payable hereunder, whether or not then due, which are owing to it by Buyer. Buyer shall in any event remain liable for all unpaid accounts. 9. Cancellation; Etc: Orders are not subject to rescheduling or cancellation unless Buyer indemnifies Seller fully against all costs or expenses arising in connection therewith. 10. Force Majeure : Seller shall not be liable for any delay or failure in delivery resulting from causes beyond its control, including earthquakes, fires, floods, strikes or other labor disputes, shortage of labor or materials, accidents to machinery, acts of sabotage, riots, delay in or lack of transportation or the requirements of any government authority. 11. Shipping; Delivery: Unless otherwise expressly agreed in writing by Seller: (a) All sales and shipments of Products sh all be FOB shipping point (unless otherwise stated in writing by Seller), at which point title to and all risk of loss of the Products shall pass from Seller to Buyer, provided that Seller shall retain a security interest in the Products until the full purchase price is paid by Buyer; (b) Delivery and shipping dates are estimates only; and (c) Seller will package Products as it deems proper for protection against normal handling and extra charges apply to special conditions. 12. Claims: Any claim by Buyer against Seller for shortage or damage to the Products occurring before delivery to the carrier or any claim related to pricing or other charges must be presented in detail in writing to Seller within 30 days of receipt of shipment. 1. Suitability: IT IS THE BUYER’S SOLE RESPOINSIBILITY TO ENSURE THAT ANY OMRON PRODUCT IS FIT AND SUFFICIENT FOR USE IN A MOTORIZED VEHICLE APPLICATION. BUYER SHALL BE SOLELY RESPONSIBLE FOR DETERMINING APPROPRIATENESS OF THE PARTICULAR PRODUCT WITH RESPECT TO THE BUYER’S APPLICATION INCLUDING (A) ELECTRICAL OR ELECTRONIC COMPONENTS, (B) CIRCUITS, (C) SYSTEM ASSEMBLIES, (D) END PRODUCT, (E) SYSTEM, (F) MATERIALS OR SUBSTANCES OR (G) OPERATING ENVIRONMENT. Buyer acknowledges that it alone has determined that the Products will meet their requirements of the intended use in all cases. Buyer must know and observe all prohibitions of use applicable to the Product/s. 2. Use with Attention: The followings are some examples of applications for which particular attention must be given. This is not intended to be an exhaustive list of all possible use of any Product, nor to imply that any use listed may be suitable for any Product: (a) Outdoor use, use involving potential chemical contamination or electrical interference. (b) Use in consumer Products or any use in significant quantities. (c) Energy control systems, combustion systems, railroad systems, aviation systems, medical equipment, amusement machines, vehicles, safety equipment, and installations subject to separate industry or government regulations. (d) Systems, machines, and equipment that c ould present a risk to life or property. 3. Prohibited Use: NEVER USE THE PRODUCT FOR AN APPLICATION INVOLVING SERIOUS RISK TO LIFE OR PROPERTY WITHOUT ENSURING THAT THE SYSTEM AS A WHOLE HAS BEEN DESIGNED TO ADDRESS THE RISKS, AND THAT THE PRODUCT IS PROPERLY RATED AND INSTALLED FOR THE INTENDED USE WITHIN THE OVERALL EQUIPMENT OR SYSTEM. 4. Motorized Vehicle Application: USE OF ANY PRODUCT/S FOR A MOTORIZED VEHICLE APPLICATION MUST BE EXPRESSLY STATED IN THE SPECIFICATION BY SELLER. 5. Programmable Products: Seller shall not be responsible for the Buyer's programming of a programmable Product. 1. Warranty : Seller's exclusive warranty is that the Products will be free from defects in materials and workmanship for a period of twelve months from the date of sale by Seller (or such other period expressed in writing by Seller). SELLER MAKES NO WARRANTY OR REPRESENTATION, EXPRESS OR IMPLIED, ABOUT ALL OTHER WARRANTIES, NON-INFRINGEMENT, MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE OF THE PRODUCTS. 2. Buyer Remedy : Seller's sole obligation hereunder shall be to replace (in the form originally shipped with Buyer responsible for labor charges for removal or replacement thereof) the non-complying Product or, at Seller's election, to repay or credit Buyer an amount equal to the purchase price of the Product; provided that there shall be no liability for Seller or its affiliates unless Seller's analysis confirms that the Products were correctly handled, stored, installed and maintained and not subject to contamination, abuse, misuse or inappropriate modification. Return of any Products by Buyer must be approved in writing by Seller before shipment. 3. Limitation on Liability : SELLER AND ITS AFFILIATES SHALL NOT BE LIABLE FOR SPECIAL, INDIRECT, INCIDENTAL OR CONSEQUENTIAL DAMAGES, LOSS OF PROFITS OR PRODUCTION OR COMMERCIAL LOSS IN ANY WAY CONNECTED WITH THE PRODUCTS, WHETHER SUCH CLAIM IS BASED IN CONTRACT, WARRANTY, NEGLIGENCE OR STRICT LIABILITY. FURTHER, IN NO EVENT SHALL LIABILITY OF SELLER OR ITS AFFILITATES EXCEED THE INDIVIDUAL PRICE OF THE PRODUCT ON WHICH LIABILITY IS ASSERTED. 4. Indemnities : Buyer shall indemnify and hold harmless Seller, its affiliates and its employees from and against all liabilities, losses, claims, costs and expenses (including attorney's fees and expenses) related to any claim, investigation, litigation or proceeding (whether or not Seller is a party) which arises or is alleged to arise from Buyer's acts or omissions under these Terms or in any way with respect to the Products. 1. Intellectual Property : The intellectual property embodied in the Products is the exclusive property of Seller and its affiliates and Buyer shall not attempt to duplicate it in any way without the written permission of Seller. Buyer (at its own expense) shall indemnify and hold harmless Seller and defend or settle any action brought against Seller to the extent that it is based on a claim that any Product made to Buyer specifications infringed intellectual property rights of another party. 2. Property; Confidentiality : Notwithstanding any charges to Buyer for engineering or tooling, all engineering and tooling shall remain the exclusive property of Seller. All information and materials supplied by Seller to Buyer relating to the Products are confidential and proprietary, and Buyer shall limit distribution thereof to its trusted employees and strictly prevent disclosure to any third party. 3. Performance Data : Performance data is provided as a guide in determining suitability and does not constitute a warranty. It may represent the result of Seller's test conditions, and the users must correlate it to actual application requirements. 4. Change In Specifications : Product specifications and descriptions may be changed at any time based on improvements or other reasons. It is Seller’s practice to change part numbers when published ratings or features are changed, or when significant engineering changes are made. However, some specifications of the Product may be changed without any notice. 5. Errors And Omissions : The information on Seller’s website or in other documentation has been carefully checked and is believed to be accurate; however, no responsibility is assumed for clerical, typographical or proofreading errors or omissions. 6. Export Controls : Buyer shall comply with all applicable laws, regulations and licenses regarding (a) export of the Products or information provided by Seller; (b) sale of Products to forbidden or other proscribed persons or organizations; (c) disclosure to non- citizens of regulated technology or information. 1. Waiver : No failure or delay by Seller in exercising any right and no course of dealing between Buyer and Seller shall operate as a waiver of rights by Seller. 2. Assignment : Buyer may not assign its rights hereunder without Seller's written consent. 3. Law : These Terms are governed by Illinois law (without regard to conflict of laws). Federal and state courts in Cook County, Illinois have exclusive jurisdiction for any dispute hereunder. 4. Amendment : These Terms constitute the entire agreement between Buyer and Seller relating to the Products, and no provision may be changed or waived unless in writing signed by the parties. 5. Severability : If any provision hereof is rendered ineffective or invalid, such provision shall not invalidate any other provision. I. GENERAL II. SALES III. PRECAUTIONS IV. WARRANTY AND LIMITATION V. INFORMATION; ETC. VI. MISCELLANEOUS

Surface-mounting Relay G6J-Y Certain Precautions on Specifications and Use 1. Suita bility for Use. Seller shall not be responsible for conformity with any stan- dards, codes or regulations which apply to the com bination of the Product in Buyer's application or use of the Product. At Buyer's request, Seller will pro- vide applicable third party certification documents identifying ratings and limi- tations of use which apply to the Product. This information by itself is not sufficient for a complete determination of the suita bility of the Product in com- bination with the end product, machine, sy stem, or other application or use. Buyer shall be solely responsi ble for determining appropriateness of the par- ticular Product with respect to Buyer' s application, product or system. Buyer shall take application responsi bility in all cases but the following is a non- exhaustive list of applications for which particular attention must be given: (i) Outdoor use, uses involving potential chemical contamination or electrical interference, or conditions or uses not described in this document. (ii) Energy control systems, com bustion systems, railroad systems, aviation systems, medical equipment, amusement machines, vehicles, safety equipment, and installations subject to separate industry or government regulations. (iii) Use in consumer products or any use in significant quantities. (iv) Systems, machines and equipment that could present a risk to life or property. Please know and observe all prohibitions of use applicable to this product. NEVER USE THE PRODUCT FOR AN APPLICATION INVOLVING SERIOUS RISK TO LIFE OR PROPERTY WITHOUT ENSURING THAT THE SYSTEM AS A WHOLE HAS BEEN DESIGNED TO ADDRESS THE RISKS, AND THAT THE OMRON PRODUCT IS PROPERL Y RATED AND INSTALLED FOR THE INTENDED USE WITHIN THE OVERALL EQUIPMENT OR SYSTEM. 2. Programma ble Products . Seller shall not be responsi ble for the user's pro- gramming of a programmable product, or any consequence thereof. 3. Performance Data . Performance data given in this pu blication is provided as a guide for the user in determining suita bility and does not constitute a war- ranty. It may represent the result of Seller's test conditions, and the users must correlate it to actual application requirements. Actual performance is subject to Seller's Warranty and Limitations of Liability. 4. Change in Specifications . Product specifications and accessories may be changed at any time based on improvements and other reasons. It is our prac- tice to change part num bers when published ratings or features are changed, or when significant construction changes are made. However, some specifica- tions of the Product may be changed without any notice. When in dou bt, spe- cial part num bers may be assigned to fix or esta blish key specifications for your application. Please consult with your Seller representative at any time to confirm actual specifications of purchased Product. 5. Errors and Omissions . The information in this pu blication has been carefully checked and is believed to be accurate; however, no responsibility is assumed for clerical, typographical or proofreading errors, or omissions. 6. RoHS Compliance . Where indicated, our products currently comply, to the best of our knowledge as of the date of this pu blication, with the requirements of the European Union's Directive on the Restriction of certain Hazardous Substances ("RoHS"), although the requirements of RoHS do not take effect until July 2006. These requirements may be subject to change. Please consult our website for current information. OMRON ON-LINE Global - http://www.omron.com USA - http://www.components.omron.com Cat. No. X301-E-1 Printed in USA OMRON ELECTRONIC COMPONENTS LLC 55 E. Commerce Drive, Suite B Schaumburg, IL 60173 847-882-2288 06/09 Specifications subject to change without notice Complete “Terms and Conditions of Sale” for product purchase and use are on Omron’s website at http://www.components.omron.com – under the “About Us” tab, in the Legal Matters section. ALL DIMENSIONS SHOWN ARE IN MILLIMETERS. To convert millimeters into inches, multiply by 0.03937. To convert grams into ounces, multiply by 0.03527.