G5C

G5C OMRON | Alldatasheet

Document overview

• PDF pages: 4

Technical content

G5C(E) PCB Relay Flat Relays that Switch 10-A/15-A Loads with New Quick-connect Terminals I Ideal for switching power in household appliances or for outputs from industrial devices. I Subminiature dimensions: 22 /G153 16 /G153 11 mm (L /G153 W /G153 H). I High-sensitivity models available with low power consumption (150 mW). I UL and CSA approved. I Fully sealed models and quick-connect terminal models available (#187 load contact terminals).

Ordering Information

/K52 /K43/K45 Contact form Enclosure ratings General purpose High-sensitivity High-capacity Quick-connect terminals SPST-NO Flux protection G5C-1 G5C-1-H G5CE-1 G5CE-1-TP Fully sealed G5C-14 G5C-14-H --- --- Rated coil voltage Note: 1. When ordering, add the rated coil voltage to the model number. Example: G5C-1 12 VDC 2. High-capacity models with a Fully sealed structure are not available. 3. Standard or high-sensitivity models with quick-connect terminals are not available. 4. VDE-approved models are available. Contact your OMRON representative for more details. 5. Models with PTI250 are also available. Contact your OMRON representative for more details. G5C - - VDC 1 2 34 5 1. Relay None: Standard E: High-capacity 2. Number of Poles 1: 1 pole (SPST -NO) 3. Enclosure Ratings None: Flux protection 4: Fully sealed 4. Classification H: High-sensitivity TP: Quick-connect terminals (#187) 5. Rated Coil Voltage 3, 5, 6, 12, 24, 48 VDC

G5C(E)G5C(E) Specifications I Coil Ratings I Contact Ratings I Characteristics Note: 1. The rated current and coil resistance are measured at a coil temperature of 23 °C with a tolerance of ±10%. 2. Operating characteristics are measured at a coil temperature of 23 °C. I Approved Standards UL508 (file No. E41515)/CSA C22.2 No.14 (file No. LR31928) Item Standard, high-capacity, or quick-connect terminals High-sensitivity

5 VDC 12 VDC 24 VDC 5 VDC 12 VDC 24 VDC

Rated current 40 mA 16.7 mA 8.3 mA 30 mA 12.5 mA 6.25 mA Coil resistance 125 /c87 720 /c87 2,880 /c87 167 /c87 960 /c87 3,840 /c87 Must operate voltage 75% max. of rated voltage 80% max. of rated voltage Must release voltage 10% min. of rated voltage Max. voltage 150% (standard)/130% (high-capacity, quick-con- nect terminals) of rated voltage (at 23 /c149 C) 150% (at 23/c149 C) Power consumption Approx. 200 mW Approx. 150 mW Item Standard High-sensitivity High-capacity, or quick-connect terminals Resistive load (cos/c102 = 1) Inductive load (cos/c102 = 0.4, L/R = 7 ms) Resistive load (cos/c102 = 1) Inductive load (cos/c102 = 0.4, L/R = 7 ms) Resistive load (cos/c102 = 1) Inductive load (cos/c102 = 0.4, L/R = 7 ms) Rated load 10 A at 250 VAC;

10 A at 30 VDC

3 A at 250 VAC;

3 A at 30 VDC

10 A at 250 VAC;

15 A at 110 VAC;

5 A at 110 VAC;

Rated carry current 10 A 10 A 15 A Max. switching voltage

250 VAC 250 VAC 250 VAC

Max. switching current

10 A 10 A 15 A

Max. switching power 2,500 VA, 300 W 750 VA, 90 W 2,500 VA, 300 W 750 VA, 90 W 2,500 VA, 300 W 750 VA, 90 W Contact resistance 30 m/c87 max. (Quick-connect terminals type: 100 m /c87 max.) Operate time 10 ms max. (High-sensitivity type: 15 ms max.) Release time 10 ms max. Insulation resistance 1,000 M/c87 min. Dielectric strength 2,500 VAC, 50/60 Hz for 1 min between contacts of same polarity 1,000 VAC, 50/60 Hz for 1 min between contacts of same polarity Impulse withstand voltage 4,500 V (1.2 x 50 µs) between coil and contacts Vibration resistance Destruction: 10 to 55 to 10 Hz, 0.75-mm single amplitude (1.5-mm double amplitude) Malfunction:10 to 55 to 10 Hz, 0.75-mm single amplitude (1.5-mm double amplitude) Shock resistance Destruction: 1,000 m/s2 Malfunction: 200 m/s2 Endurance Mechanical: 20,000,000 operations min. at 18,000 operations/hr Electrical: 300,000 operations min. (100,000 operations min. for Fully sealed Type) at 1,200 operations/hr under rated load of 10 A at 250 VAC; 100,000 operations min. under load of 15 A at 110 VAC for high-capacity models 100,000 operations min. at 1,200 operations/hr under rated load of 10 A at 30 VDC Ambient temperature Operating: /c45 25°C to 70°C (with no icing) Ambient humidity Operating: 5% to 85% Weight Approx. 8 g (for TP model: Approx. 9.6 g) Coil rating Contact rating 3 to 100 VDC 15 A, 125 VAC

10 A, 250 VAC

10 A, 30 VDC (resistive load only)

G5C(E)G5C(E) Engineering Data Dimensions Note: 1. All units are in millimeters unless otherwise indicated. 2. Orientation marks are indicated as follows: Maximum Switching Power Switching voltage (V) Endurance Ambient Temperature vs. Maximum Coil Voltage Endurance (x10 operations)3 Switching current (A) Maximum coil voltage (%) Switching current (A) Ambient temperature ( °C) DC resistive load AC resistive load 250-VAC resistive load 100-VAC resistive load 30-VDC resistive load Continuous max. permissible voltage (10 A) Continuous max. permissible voltage (15 A) Note: The maximum coil voltage refers to the maxi- mum value in a varying range of operating power voltage, not a continuous voltage. Terminal Arrangement/Internal Connections (Bottom View) 22 max. (21.9)* 11 max. (10.9)* 3.5 1.6 10.16 7.62 0.6 16 max. (15.9)* 0.3 0.4 12.7 G5C(E)-1 G5CE-1-TP Mounting Holes (Bottom View) Mounting Holes (PCB) 2.54 2.54 2Tow, 1 dia. elliptic holes Two, 1 dia. 4.825.1 max. 0.3 3.6 16.1 5 1.3 dia. 3.2 6.35 4.9 0.3 13.3 22.1 max. 0.5 0.5 14.25 17.78 0.6 1.35 10°±1 Terminal Arrangement/Internal Connections (Top View) (Bottom View) 17.78 1.6 16.1 21.1 5 6.25 14.25 1.8Two, 1 dia. Four, 1.2 dia. elliptic holes *Average value

G5C(E)G5C(E) Precautions Quick-connect Terminals The quick-connect terminals can be connected to an appropriate load. Consult your OMRON representative, however, when you intend to impose voltage on the quick-connect terminals mounted on a PCB. The terminals are compatible to the Fasten receptacle #187 posi- tive block connector. The portion marked with oblique lines includes the charged termi- nals of the power relay. When you mount the power relay on a PCB, make sure any unnecessary metal patterns on the PCB are kept away from this portion. 12.7 86 . 5 0.18 ALL DIMENSIONS SHOWN ARE IN MILLIMETERS. To convert millimeters into inches, multiply by 0.03937. To convert grams into ounces, multiply by 0.03527. Cat. No. J085-E1-2A