G524B2F51U | DigiCamel IC Datasheet

Online Datasheet

Read G524B2F51U online.

G524A_V01 GMT | Alldatasheet

Document overview

Manufacturer or author: Provided By alldatasheet.com(free datasheet download site)
PDF pages: 19

Technical content

Features

70mΩ High-Side MOSFET (G524A,G524B,G524C,G524D) Available with 4 Versions of Current Limits with Foldback Operating Range:2.7V to 5.5V 1mS Typical Rise Time Fast Overcurrent Response -1.5µs (TYPICAL) Under voltage Lockout 130µA Quiescent Supply Current 1µA Maximum Shutdown Supply Current Logic Level Enable Pin, Available with Active-High or Active-Low Version No Reverse Current when Power Off Deglitched Open-Drain Over-Current Flag Output ( OC ) Available with or without Output Shutdown Pull-low Resister Output Reverse-Voltage Protection SOT-23-5, TSOT-23-6, MSOP-8 and MSOP-8 (FD) Packages UL Certification_#E232223 CB Test Certification by IEC 60950-1:2005 (2nd Edition); Am 1:2009 + Am 2:2013

Applications

High-Side Power Protection Switch USB Power Management USB Host and Self-Powered Bubs USB Bus-Powered Hubs Hot Plug-In Power Supplies Battery-Charger Circuits General Description The G524 is an integrated power switch for self-powered and bus-powered Universal Serial Bus (USB) applications. G524A, G524B, G524C, G524D are 70m Ω R DS(ON) . Several Protection features include current limiting and thermal shutdown to prevent catastrophic switch fail- ure caused by increasing power dissipation when con- tinuous heavy loads or short circuit occurs. A built-in charge pump is used to drive the N-channel MOSFET that is free of parasitic body diode to eliminate any reversed current flow across the switch when it is powered off. When the output voltage is higher than input voltage, the power switch is turned off by internal output reverse-voltage comparator. OC is an open-drain output report over-current or over-temperature event and has typical 9ms deglitch timeout period. In addition, OC (G524X3/4, X=A, B, C, D) also reports output reverse-voltage condition with typical 5ms deglitch timeout period. Pin Configuration Typical Application Circuit 0.1µF 22µF Load OC EN(EN) 1µF Power Supply 2.7V to 5.5V OUTIN ON OFF *: 1µF of input capacitor is enough in most application cases. If the PCB trace of power rail to IN is long, larger input capacitor is necessary. G524 GND MSOP-8 G524 OUT EN (EN) OUT OC IN IN OUT* Note: Recommend connecting the Thermal Pad to the GND for excellent power dissipation. *Pin#6 should be considered as OUT when circuit design and PCB layout, but it is NC pin actually. GND TSOT-23-6 OUT43IN G524 5O U T OCEN (EN) GND MSOP-8 (FD) OUT EN (EN) OUT OC IN IN OUT* Thermal Pad SOT-23-5 43OC OUT IN GND G524 G524 EN (EN) 0.1µF 22µF Load OC EN(EN) 1µF Power Supply 2.7V to 5.5V OUTIN ON OFF *: 1µF of input capacitor is enough in most application cases. If the PCB trace of power rail to IN is long, larger input capacitor is necessary. G524 GND MSOP-8 G524 OUT EN (EN) OUT OC IN IN OUT* Note: Recommend connecting the Thermal Pad to the GND for excellent power dissipation. *Pin#6 should be considered as OUT when circuit design and PCB layout, but it is NC pin actually. GND TSOT-23-6 OUT43IN G524 5O U T OCEN (EN) GND MSOP-8 (FD) OUT EN (EN) OUT OC IN IN OUT* Thermal Pad SOT-23-5 43OC OUT IN GND G524 G524 EN (EN)

Ver: 0.94 Aug 02, 2016 TEL: 886-3-5788833 http://www.gmt.com.tw G524A/B/C/D Global Mixed-mode Technology

Ordering Information

NUMBER MARKING ENABLE Current Limit Output MOS RDS(ON) Output Shutdown Resistor TEMP. RANGE PACKAGE (Green) G524D1T11U 54D1x Active High 1.5A 70mΩ Yes -40 oC to +85oC SOT-23-5 G524D2T11U 54D2x Active Low 1.5A 70mΩ Yes -40 oC to +85oC SOT-23-5 G524D3T11U 54D3x Active High 1.5A 70mΩ No -40 oC to +85oC SOT-23-5 G524D4T11U 54D4x Active Low 1.5A 70mΩ No -40 oC to +85oC SOT-23-5 G524C1T11U 54C1x Active High 2A 70mΩ Yes -40 oC to +85oC SOT-23-5 G524C2T11U 54C2x Active Low 2A 70mΩ Yes -40 oC to +85oC SOT-23-5 G524C3T11U 54C3x Active High 2A 70mΩ No -40 oC to +85oC SOT-23-5 G524C4T11U 54C4x Active Low 2A 70mΩ No -40 oC to +85oC SOT-23-5 G524B1T11U 54B1x Active High 2.5A 70mΩ Yes -40 oC to +85oC SOT-23-5 G524B2T11U 54B2x Active Low 2.5A 70mΩ Yes -40 oC to +85oC SOT-23-5 G524B3T11U 54B3x Active High 2.5A 70mΩ No -40 oC to +85oC SOT-23-5 G524B4T11U 54B4x Active Low 2.5A 70mΩ No -40 oC to +85oC SOT-23-5 G524A1T11U 54A1x Active High 2.1A 70mΩ Yes -40 oC to +85oC SOT-23-5 G524A2T11U 54A2x Active Low 2.1A 70mΩ Yes -40 oC to +85oC SOT-23-5 G524A3T11U 54A3x Active High 2.1A 70mΩ No -40 oC to +85oC SOT-23-5 G524A4T11U 54A4x Active Low 2.1A 70mΩ No -40 oC to +85oC SOT-23-5 G524D1TP1U 54D1x Active High 1.5A 70mΩ Yes -40 oC to +85oC TSOT-23-6 G524D2TP1U 54D2x Active Low 1.5A 70mΩ Yes -40 oC to +85oC TSOT-23-6 G524D3TP1U 54D3x Active High 1.5A 70mΩ No -40 oC to +85oC TSOT-23-6 G524D4TP1U 54D4x Active Low 1.5A 70mΩ No -40 oC to +85oC TSOT-23-6 G524C1TP1U 54C1x Active High 2A 70mΩ Yes -40 oC to +85oC TSOT-23-6 G524C2TP1U 54C2x Active Low 2A 70mΩ Yes -40 oC to +85oC TSOT-23-6 G524C3TP1U 54C3x Active High 2A 70mΩ No -40 oC to +85oC TSOT-23-6 G524C4TP1U 54C4x Active Low 2A 70mΩ No -40 oC to +85oC TSOT-23-6 G524B1TP1U 54B1x Active High 2.5A 70mΩ Yes -40 oC to +85oC TSOT-23-6 G524B2TP1U 54B2x Active Low 2.5A 70mΩ Yes -40 oC to +85oC TSOT-23-6 G524B3TP1U 54B3x Active High 2.5A 70mΩ No -40 oC to +85oC TSOT-23-6 G524B4TP1U 54B4x Active Low 2.5A 70mΩ No -40 oC to +85oC TSOT-23-6 G524A1TP1U 54A1x Active High 2.1A 70mΩ Yes -40 oC to +85oC TSOT-23-6 G524A2TP1U 54A2x Active Low 2.1A 70mΩ Yes -40 oC to +85oC TSOT-23-6 G524A3TP1U 54A3x Active High 2.1A 70mΩ No -40 oC to +85oC TSOT-23-6 G524A4TP1U 54A4x Active Low 2.1A 70mΩ No -40 oC to +85oC TSOT-23-6 G524D1P81U G524D1 Active High 1.5A 70mΩ Yes -40 oC to +85oC MSOP-8 G524D2P81U G524D2 Active Low 1.5A 70mΩ Yes -40 oC to +85oC MSOP-8 G524D3P81U G524D3 Active High 1.5A 70mΩ No -40 oC to +85oC MSOP-8 G524D4P81U G524D4 Active Low 1.5A 70mΩ No -40 oC to +85oC MSOP-8 G524C1P81U G524C1 Active High 2A 70mΩ Yes -40 oC to +85oC MSOP-8 G524C2P81U G524C2 Active Low 2A 70mΩ Yes -40 oC to +85oC MSOP-8 G524C3P81U G524C3 Active High 2A 70mΩ No -40 oC to +85oC MSOP-8 G524C4P81U G524C4 Active Low 2A 70mΩ No -40 oC to +85oC MSOP-8 G524B1P81U G524B1 Active High 2.5A 70mΩ Yes -40 oC to +85oC MSOP-8 G524B2P81U G524B2 Active Low 2.5A 70mΩ Yes -40 oC to +85oC MSOP-8 G524B3P81U G524B3 Active High 2.5A 70mΩ No -40 oC to +85oC MSOP-8 G524B4P81U G524B4 Active Low 2.5A 70mΩ No -40 oC to +85oC MSOP-8 G524A1P81U G524A1 Active High 2.1A 70mΩ Yes -40 oC to +85oC MSOP-8 G524A2P81U G524A2 Active Low 2.1A 70mΩ Yes -40 oC to +85oC MSOP-8 G524A3P81U G524A3 Active High 2.1A 70mΩ No -40 oC to +85oC MSOP-8 G524A4P81U G524A4 Active Low 2.1A 70mΩ No -40 oC to +85oC MSOP-8

Ver: 0.94 Aug 02, 2016 TEL: 886-3-5788833 http://www.gmt.com.tw G524A/B/C/D Global Mixed-mode Technology Ordering Information (Continued) ORDER NUMBER MARKING ENABLE Current Limit Output MOS RDS(ON) Output Shutdown Resistor TEMP. RANGE PACKAGE (Green) G524D1F51U G524D1 Active High 1.5A 70mΩ Yes -40 oC to +85oC MSOP-8 (FD) G524D2F51U G524D2 Active Low 1.5A 70mΩ Yes -40 oC to +85oC MSOP-8 (FD) G524D3F51U G524D3 Active High 1.5A 70mΩ No -40 oC to +85oC MSOP-8 (FD) G524D4F51U G524D4 Active Low 1.5A 70mΩ No -40 oC to +85oC MSOP-8 (FD) G524C1F51U G524C1 Active High 2A 70mΩ Yes -40 oC to +85oC MSOP-8 (FD) G524C2F51U G524C2 Active Low 2A 70mΩ Yes -40 oC to +85oC MSOP-8 (FD) G524C3F51U G524C3 Active High 2A 70mΩ No -40 oC to +85oC MSOP-8 (FD) G524C4F51U G524C4 Active Low 2A 70mΩ No -40 oC to +85oC MSOP-8 (FD) G524B1F51U G524B1 Active High 2.5A 70mΩ Yes -40 oC to +85oC MSOP-8 (FD) G524B2F51U G524B2 Active Low 2.5A 70mΩ Yes -40 oC to +85oC MSOP-8 (FD) G524B3F51U G524B3 Active High 2.5A 70mΩ No -40 oC to +85oC MSOP-8 (FD) G524B4F51U G524B4 Active Low 2.5A 70mΩ No -40 oC to +85oC MSOP-8 (FD) G524A1F51U G524A1 Active High 2.1A 70mΩ Yes -40 oC to +85oC MSOP-8 (FD) G524A2F51U G524A2 Active Low 2.1A 70mΩ Yes -40 oC to +85oC MSOP-8 (FD) G524A3F51U G524A3 Active High 2.1A 70mΩ No -40 oC to +85oC MSOP-8 (FD) G524A4F51U G524A4 Active Low 2.1A 70mΩ No -40 oC to +85oC MSOP-8 (FD) Note: T1: SOT-23-5 TP:TSOT-23-6 P8: MSOP-8 F5: MSOP-8 (FD) 1: Bonding Code U: Tape & Reel Green : Lead Free / Halogen Free.

Ver: 0.94 Aug 02, 2016 TEL: 886-3-5788833 http://www.gmt.com.tw G524A/B/C/D Global Mixed-mode Technology Absolute Maximum Ratings Thermal Resistance Junction to Ambient, (θJA )* Continuous Power Dissipation (T A = +25°C)* Thermal Resistance Junction to Case, (θ JC) Storage Temperature (T Operating Ratings *Please refer to Minimum Footprint PCB Layout Section.

Electrical Characteristics

VIN = 5V, CIN=1µF, COUT=1µF, RL=10Ω TA = 25°C. The device is not guaranteed to function out side its operating conditions. Parameters with MIN and/or MAX limits are 100% tested at +25°C, unless otherwise specified. PARAMETER CONDITION MIN TYP MAX UNIT S Input Voltage Rage 2.7 --- 5.5 V Output MOS RDS(ON) G524A1/G524A2/G524A3/G524A4, IOUT=1.6A --- 70 85 mΩ G524B1/G524B2/G524B3/G524B4, IOUT=2.0A G524C1/G524C2/G524C3/G524C4, IOUT=1.5A G524D1/G524D2/G524D3/G524D4, IOUT=1.0A Supply Current EN=Enable, V OUT=VIN=5V @ IOUT=0A --- 130 190 µA Output Turn-on Rising Time RL=10Ω, 90% Settling VIN=5V 1 1.4 1.8 ms VIN=3.3V 1.6 2 2.4 Over Current Trigger Point G524A1/G524A2/G524A3/G524A4 1.9 2.1 2.4 A G524B1/G524B2/G524B3/G524B4 2.2 2.5 2.8 G524C1/G524C2/G524C3/G524C4 1.7 2 2.3 G524D1/G524D2/G524D3/G524D4 1.2 1.5 1.8 Fold-Back Current G524A1/G524A2/G524A3/G524A4, VIN>3.5V and VOUT<1V 0.9 1.4 2 A G524B1/G524B2/G524B3/G524B4, VIN>3.5V and VOUT<1V 1 1.6 2.3 G524C1/G524C2/G524C3/G524C4, VIN>3.5V and VOUT<1V 0.8 1.3 1.8 G524D1/G524D2/G524D3/G524D4, VIN>3.5V and VOUT<1V 0.6 1 1.4 EN Input Threshold-High VIH 1.2 --- --- V EN Input Threshold-Low VIL --- --- 0.6 V Shutdown Supply Current EN=Disable, V OUT=”OPEN” --- 0.1 1 µA Shutdown Pull Low Resistance EN=Disable --- 150 --- Ω Output Leakage Current EN= Disable, VOUT=5V --- 0.5 1 µA VIN Under Voltage Lockout 2.2 2.4 2.6 V Thermal Limit --- 140 --- °C Thermal Limit Hysteresis --- 20 --- °C OC Deglitch OC assertion or deassertion 4 9 15 ms Output Reverse-Voltage Trigger Point (VOUT-VIN) V IN=5V G524X1/2, X=A, B, C, D 20 30 --- mV G524X3/4, X=A, B, C, D 10 20 --- mV Output Reverse-current Trigger Point G524X1/2, X=A, B, C, D 400 600 --- mA G524X3/4, X=A, B, C, D 200 400 --- mA Output Reverse-Voltage Deglitch Time V IN=5V --- 5 --- ms tIOS Response Time to Short Circuit V IN=5V, see figure 1,2 --- 1.5 3.5 µs

Ver: 0.94 Aug 02, 2016 TEL: 886-3-5788833 http://www.gmt.com.tw G524A/B/C/D Global Mixed-mode Technology Typical Performance Characteristics G524B1P81U, VIN= 5V, CIN=1μF, COUT=1μF, TA=25°C, unless otherwise noted. 100 120 140 160 2 . 533 . 544 . 555 . 5 V IN - Input Voltage - V IQ - Supply Current - uA TA = 85OC TA = 25OC TA = -45OC Supply Current vs. Input Voltage -0.8 -0.6 -0.4 -0.2 0.2 0.4 0.6 0.8 2.5 3 3.5 4 4.5 5 5.5 VIN - Input Voltage - V IQSHDN - Shutdown Supply Current - uA TA = 85OC TA = 25OC TA = -45OC Shutdown Supply Current vs. Input Voltage Enable Input Threshold vs. Input Voltage 0.1 0.2 0.3 0.4 0.5 0.6 0.7 0.8 0.9 2 . 53 3 . 544 . 555 . 5 VIN - Input Voltage - V VEN - Enable Input Threshold - V VEN FallingVEN Rising Enable Input Threshold vs. Temperature 0.2 0.4 0.6 0.8 1.2 - 4 5 - 3 5 - 2 5 - 1 5 - 5 51 52 53 54 55 56 57 58 5 TA - Ambient Temperature - OC VEN - Enable Input Threshold - V VEN Rising VEN Falling 6.5 7.5 8.5 9.5 2.5 3 3.5 4 4.5 5 5.5 VIN - Input Voltage - V TOC - OC Deglitch Time - ms OC D eassertion OC Assertion OC Deglitch Time vs. Input Voltage 1.2 1.4 1.6 1.8 2.2 2.4 2.6 2.8 3.2 - 4 5 - 3 5 - 2 5 - 1 5- 5 5 1 52 53 54 55 56 57 58 5 TA - Ambient Temperature - OC VUVLO - UVLO Threshold- V UVLO Threshold vs. Temperature

Ver: 0.94 Aug 02, 2016 TEL: 886-3-5788833 http://www.gmt.com.tw G524A/B/C/D Global Mixed-mode Technology Typical Performance Characteristics (continued) ON-Resistance vs. Input Voltage ON-Res is tance vs . Temperature 100 33 . 544 . 555 . 5 V IN - Input Voltage - V RDS(ON) - On Resistance - mΩ TA = 85OC TA = 25OC TA = -45OC IOUT = 1A 100 - 4 5 - 3 5 - 2 5 - 1 5 - 5 5 1 52 53 54 55 56 57 58 5 TA - Ambient Temperature - OC RDS(ON) - On Resistance - mΩ IOUT = 1A VIN = 3V VIN = 3.5V VIN = 5V Over Current Trigger Point vs. Input Voltage Short Circuit Current vs. Input Voltage 1.2 1.4 1.6 1.8 2.2 2.4 2.6 2.8 33 . 5 44 . 5 55 . 5 VIN - Input Voltage - V IOC - Over Current Trigger Point - A TA = 85OC TA = 25OC TA = -45OC 1.2 1.4 1.6 1.8 2.2 2.4 2.6 2.8 33 . 544 . 555 . 5 V IN - Input Voltage - V IOS - Short Circuit Current - A TA = 85OC TA = 25OC TA = -45OC Overcurrent Protection Characteris tics Overcurrent Protection Characteris tics 0.5 1.5 2.5 3.5 4.5 0 0.5 1 1.5 2 2.5 3 IO - Output Current - A VO - Output Voltage - V VIN = 5V TA = 85OC TA = 25OC TA = -45OC 0.3 0.6 0.9 1.2 1.5 1.8 2.1 2.4 2.7 00 . 511 . 5 22 . 53 I O - Output Current - A VO - Output Voltage - V VIN = 2.7V TA = -45OC TA = 25OC TA = 85OC

Ver: 0.94 Aug 02, 2016 TEL: 886-3-5788833 http://www.gmt.com.tw G524A/B/C/D Global Mixed-mode Technology Typical Performance Characteristics (continued) G524A Overcurrent Protection Characteristics 0.5 1.5 2.5 3.5 4.5 00 . 511 . 522 . 5 VO - Output Voltage - V IO- Output Current - A TA=25℃ TA=-45℃ TA=85℃ VIN=5V G524A Overcurrent Protection Characteristics 0.5 1.5 2.5 3.5 4.5 0 0.5 1 1.5 2 VO - Output Voltage - V IO- Output Current - A VIN=5V TA=25℃ TA=-45℃ TA=85℃ G524C Overcurrent Protection Characteristics 0.3 0.6 0.9 1.2 1.5 1.8 2.1 2.4 2.7 00 . 511 . 522 . 5 VO - Output Voltage - V IO- Output Current - A VIN=2.7V TA=25℃ TA=-45℃ TA=85℃ 0.3 0.6 0.9 1.2 1.5 1.8 2.1 2.4 2.7 0 0.5 1 1.5 2 VO - Output Voltage - V IO- Output Current - A VIN=2.7V TA=25℃ TA=-45℃ TA=85℃ G524C Overcurrent Protection Characteristics G524D Overcurrent Protection Characteristics G524D Overcurrent Protection Characteristics 0.5 1.5 2.5 3.5 4.5 0 0.5 1 1.5 2 VO - Output Voltage - V IO- Output Current - A VIN=5V TA=25℃ TA=-45℃ TA=85℃ 0.3 0.6 0.9 1.2 1.5 1.8 2.1 2.4 2.7 00 . 511 . 52 VO - Output Voltage - V IO- Output Current - A VIN=2.7V TA=25℃ TA=-45℃ TA=85℃

Ver: 0.94 Aug 02, 2016 TEL: 886-3-5788833 http://www.gmt.com.tw G524A/B/C/D Global Mixed-mode Technology Typical Performance Characteristics (continued) Inrush Current with Different Load Capacitance VE N / OC IOUT VIN = 5V CL = 470μF RL = 10Ω Thermal Shutdown Response VE N VOU T / OC IOUT VIN = 5V CL = 47μF RL = 1Ω Turn on Delay Time and Rise Time Turn off Delay Time and Fall Time VE N V OUT V IN = 5V CL = 1μF RL = 10Ω VIN = 5V RL = 10Ω VE N VOU T CL = 22μF CL = 120μF CL = 470μF 0.2 0.4 0.6 0.8 3 3.5 4 4.5 5 5.5 VIN - Input Voltage - V IOREV - Output Reverse Current - A TA = 85OC TA = 25OC TA = -45OC Output Revers e Current vs . Input Voltage Output Revers e Current vs . Temperature 0.2 0.4 0.6 0.8 - 4 5 - 3 5 - 2 5 - 1 5- 5 5 1 52 53 54 55 56 57 58 5 TA - Ambient Temperature - OC IOREV - Output Reverse Current - A VIN = 3V VIN = 3.5V VIN = 5V

Ver: 0.94 Aug 02, 2016 TEL: 886-3-5788833 http://www.gmt.com.tw G524A/B/C/D Global Mixed-mode Technology Typical Performance Characteristics (continued) UVLO Protection at Rising CIN = 1μF CL = 1μF RL = 33Ω VIN VOU T UVLO Protection at Falling CIN = 1μF CL = 1μF RL = 33Ω VIN VOU T Inrush Short Circuit Response VIN VOU T IOUT VIN = 5V CL = 47μF Short Circuit Response at Start up VIN IOUT VIN = 5V CL = 47μF Short-Circuit Current, Device Enable into Short VIN = 5V CIN = 47μF CL = 47μF IOUT / OC VE N Re sista nce Loa d Inrush Re sponse IOUT / OC VOU T CL = 47μF RL = 1Ω

Ver: 0.94 Aug 02, 2016 TEL: 886-3-5788833 http://www.gmt.com.tw G524A/B/C/D Global Mixed-mode Technology Typical Performance Characteristics (continued) Capacitance Load Inrush Response VIN VOUT IOUT / OC VIN = 5V COUT = 47μF RL = 10Ω CL = 470μF hot plug-in Capacitance Load Inrush Response VIN VOUT / OC IOUT VIN = 5V COUT = 120μF RL = 10Ω CL = 10μF hot plug-in Reverse-Voltage Protection Res ponse Reverse-Voltage Protection Recovery CL=22uF RL=10Ω VIN FLAG IOUT VOUT5.5V Appied to VOUT CL=22uF RL=10Ω VIN FLAG IOUT VOUT 5.5V Remove from VOUT G524B3P81U Reverse-Voltage Protection Response VIN VIN & VOUT VOUT5.5V Applied to VOUT / OC IOUT Shutdown RL = 10Ω CL = 22μF Reverse-Voltage Protection Recovery VIN & VOUT / OC IOUT VIN VOUT 5.5V Removed from VOUT RL = 10Ω CL = 22μF

Ver: 0.94 Aug 02, 2016 TEL: 886-3-5788833 http://www.gmt.com.tw G524A/B/C/D Global Mixed-mode Technology Pin Description PIN NAME PIN FUNCTION SOT-23-5 TSOT-23-6 MSOP-8 MSOP-8 (FD) 2 2 1 1 GND Ground 5 3 2,3 2,3 IN Input Supply: Output MOSFET Drain, which also supplies IC's internal circuitry. Connect to positive supply. 4 1 4 4 EN( EN ) Enable: Logic level enable input. Make sure EN pin never floating. 3 6 5 5 OC Over-Current: Open-Drain OC output. 1 4,5 6,7,8 6,7,8 OUT Switch Output : Output MOSFET Source of switch. Typically connect to switched side of load. Thermal Pad Recommend connecting the Thermal Pad to the GND for excel- lent power dissipation. Block Diagram Clock BandGap Reference UVLO Thermal Sense Overcurrent Limiting Gate Control Current SenseCMP IN OUT EN (EN) GND OC Deglitch logic OC Shutdown Signal* Output Reverse-Voltage Protection *Output Shutdown Pull-low Resistor is available in G524X1 and G524X2, X=A, B, C, and D. Clock BandGap Reference UVLO Thermal Sense Overcurrent Limiting Gate Control Current SenseCMP IN OUT EN (EN) GND OC Deglitch logic OC Shutdown Signal* Output Reverse-Voltage Protection *Output Shutdown Pull-low Resistor is available in G524X1 and G524X2, X=A, B, C, and D.

Ver: 0.94 Aug 02, 2016 TEL: 886-3-5788833 http://www.gmt.com.tw G524A/B/C/D Global Mixed-mode Technology Functional Description Input and Output IN (input) is the power supply connection to the logic circuitry and the drain of the output MOSFET. OUT (output) is the source of the output MOSFET. In a typ- ical application, current flows through the switch from IN to OUT toward the load. Both OUT pins must be connected together to the load. Thermal Shutdown Thermal shutdown protects G524 from excessive power dissipation. If the die temperature exceeds 140°C, the MOSFETS switch is shut off. 20 °C of hystersis prevents the switch from turning on until the die temperature drops to 120 °C. Thermal shutdown circuit functions only when the switch is enabled. Undervoltage Lockout UVLO (undervoltage lockout) prevents the output MOSFET from turning on until IN (input voltage) ex- ceeds 2.4V typically. After the switch turns on, if the voltage drops below 2.4V typically, UVLO shuts off the output MOSFET. Over Current Trigger Point The typical over current trigger point of G524 is 2.5A, 2.1A, 2A, 1.5A. There is foldback of current limit when V IN>3.5V and V OUT<1V. (See Typical Performance Characteristics) Output Reverse-Voltage Protection The output reverse-voltage protection turns off the MOSFET switch whenever the output voltage is higher than the input voltage by 20mV (typ) for 5ms (typ) and the MOSFET switch will turn on when output re- verse-voltage condition is removed for 5ms (typ). OC Function The OC open-drain output is asserted (active low) when an over current condition is encountered after a 9-ms deglitch timeout. The output remains asserted until the overcurrent condition is removed. Over tem- perature condition is also reported immediately by OC open-drain output. In addition, OC (G524X3/4, X=A, B, C, D) is also asserted (active low) in output reverse-voltage condition with typical 5ms deglitch timeout period until the output reverse-voltage condi- tion is removed. Applications Information Supply Filtering A 1 µF bypass capacitor from IN to GND, located near the G524, is strongly recommended to control supply transients. Without a bypass capacitor, an output short may cause sufficient ringing on the input (from supply lead inductance) to damage internal control circuitry. Input transients must not exceed the absolute maxi- mum supply voltage (V IN max = 6V) even for a short duration. EN, the Enable Input EN must be driven logic high or logic low for a clearly defined input. Floating the input may cause unpre- dictable operation. EN should not be allowed to go negative with respect to GND.

Ver: 0.94 Aug 02, 2016 TEL: 886-3-5788833 http://www.gmt.com.tw G524A/B/C/D Global Mixed-mode Technology Test Circuit Timing Diagrams Device Under Test OUT COUT IOUT VOUT CLRL IL Current Probe Device Under Test OUT COUT IOUT VOUT CLRL IL Current Probe 90% 10% VOUT Output Rise and Fall Times tFtR 10% 90% 50% 90% tOFF tON 10% VEN VOUT Switch Delay Times 90% 10% VOUT Output Rise and Fall Times tFtR 10% 90% 50% 90% tOFF tON 10% VEN VOUT Switch Delay Times

Ver: 0.94 Aug 02, 2016 TEL: 886-3-5788833 http://www.gmt.com.tw G524A/B/C/D Global Mixed-mode Technology Layout Consideration Top View Bottom View EV524 PCB Information Board Material FR4 Size 46×36mm 2 Board Thickness 1.6mm Layers 2 Copper Thickness 2 oz. Route input and output traces as wide as possible, a whole plane is recommended Place input capacitor as close to the G524 as possible GND OC CIN1 MSOP8 EN CTRL COUT VOUT RPULL VIN Hi Low CIN COUT1 EV524 Jun/2012 http:\\www.gmt.com.tw

Ver: 0.94 Aug 02, 2016 TEL: 886-3-5788833 http://www.gmt.com.tw G524A/B/C/D Global Mixed-mode Technology

Package Information

PACKAGE Q ’TY/REEL SOT-23-5 3,000 ea

Ver: 0.94 Aug 02, 2016 TEL: 886-3-5788833 http://www.gmt.com.tw G524A/B/C/D Global Mixed-mode Technology Taping Specification PACKAGE Q ’TY/REEL TSOT-23-6 3,000 ea

Ver: 0.94 Aug 02, 2016 TEL: 886-3-5788833 http://www.gmt.com.tw G524A/B/C/D Global Mixed-mode Technology Taping Specification PACKAGE Q ’TY/REEL MSOP-8 3,000 ea

Ver: 0.94 Aug 02, 2016 TEL: 886-3-5788833 http://www.gmt.com.tw G524A/B/C/D Global Mixed-mode Technology MSOP-8 (FD) Package Taping Specification GMT Inc. does not assume any responsibility for use of any circuitry described, no circuit patent licenses are implied and GMT Inc. reserves the right at any time without notice to change said circuitry and specifications. PACKAGE Q ’TY/REEL MSOP-8 (FD) 3,000 ea

Product Information

G524B2F51U specifications and overview.

Summary

Power Distribution Switch Ver: 0.94 Aug 02, 2016

Description

Power Distribution Switch Ver: 0.94 Aug 02, 2016

Source title G524B2F51U Datasheet(PDF) - Global Mixed-mode Technology Inc

Related Parts

More parts from the same family.

Browse manufacturer