DATASHEET SEARCH SITE | WWW.ALLDATASHEET.COM
Document overview
- Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
- PDF pages: 1
Technical content
Features
Integrated Dual Channel Load Switch Input Voltage Range: 0.8-V to 5.5V Dual Ultra-low ON-Resistance (10mΩ) 6A Continuous Switch Current per channel Low Threshold Control Inputs Adjustable Slew-rate Control Quick Output Discharge Transistor 10 Pin AQFN Package
Applications
Notebooks / Netbooks Tablet PCs Consumer Electronics Set-Top-Boxes Industrial Systems Telecom Systems General Description The G5010 is dual N-channel MOSFET power switch designed for high-sideload-switching applications, and the device has a typical R DS(ON) of 10m and the output current is limited to 6A. Each switch is independently controlled by an on/off input (EN1, EN2), which is ca- pable of interfacing directly with low-voltage GPIO control signals. In the G5010, a 320 Ω on-chip load resistor is added for quick output discharge (QOD) when the switch is turned off. The rise time of the device is internally con- trolled in order to avoid in-rush current and can be adjusted using a ceramic capacitor on the CTx pins. The G5010 is available in 10 pin AQFN package.
Ordering Information
NUMBER MARKING TEMP. RANGE PACKAGE (Green) G5010AC1U 5010 -40°C to 85°C AQFN2X2-10 Note: AC: AQFN2X2-10 1: Bonding Code U: Tape & Reel Pin Configuration Typical Application Circuit * AQFN2X2-10 Flip-Chip package thermal guide: 1) All of leads can help power dissipation. 2) Keep all of PCB trace(near leads) width as wide as possible. Please refer to PCB layout considerations for example. 78910 CT2 OUT2 IN2 IN1 OUT1 CT1 G5010 AQFN2X2-10 EN1GNDVBIASEN2 78910 CT2 OUT2 IN2 IN1 OUT1 CT1 G5010 AQFN2X2-10 EN1GNDVBIASEN2 control VBIAS OUT1 IN1 EN1 GND CT1 Charge pump CT2 EN2 OUT2 IN2 driver driver 10uF VIN2 10uF VIN1 1uF