G47A SENSATA | Alldatasheet
Document overview
- Manufacturer or author: Provided By alldatasheet.com(free datasheet download site)
- PDF pages: 2
Technical content
ADVANCED S WITCHING SOLUTIO NS COIL RATINGS Nominal, Volts dc 12 26.5 Pick-up, Volts dc, Max. 8 16 Drop-Out, Volts dc .5 - 5 1 - 10 Coil Resistance (Ohms ±10%) 230 920 G47A 8kV SPST-NO HV Relay Single Pole Single Throw - Normally Open PRODUCT SPECIFICATIONS Contact & Relay Ratings Units G47 Contact Form A Contact Arrangement SPST-NO Voltage, Test Max., Contacts & to Base (15 μA Leakage Max., dc or 60Hz) kV Peak 9 Voltage, Operating Max., Contacts & to Base (15 μA Leakage Max.) dc or 60 Hz kV Peak 8 2.5 MHz kV Peak 7.5
16 MHz kV Peak 7
32 MHz kV Peak 5
Current, Continuous Carry Max dc or 60 Hz Amps 12*
2.5 MHz Amps 10
16 MHz Amps 5
32 MHz Amps 3
Coil Hi-Pot (V RMS, 60 Hz) V 500 Capacitance Across Open Contacts pF 1.2 Contacts to Ground pF 1.2 Resistance, Contact Max @ 1A, 28 Vdc ohms 0.03 Operate Time ms 10 Release Time ms 10 Life, Mechanical cycles 2 million Weight, Nominal g (oz) 25 (0.09) Vibration, Operating, Sine (55-1000 Hz Peak) G’s 10 Shock, Operating, 1/2 Sine11ms (Peak) G’s 30 Temperature Ambient Operating °C -55 to +125 GIGAVAC® - 6382 Rose Lane - Carpinteria, CA 93013 - ph +1-805-684-8401 - fax +1-805-684-8402 info@gigavac.com - www.gigavac.com - ©Copyright 2003-2015 GIGAVAC, LLC.
FEATURES
RF efficient design for low signal loss Identical performance mounted in any axis Vacuum dielectric for low stable contact resistance Low coil power Meets or exceeds MIL-R-83725 Rev 2 8/9/16 PART NUMBER SYSTEM G47A 3 3 4 Coil Voltage 2 = 12 Vdc, Bus Wire 3 = 26.5 Vdc, Bus Wire High Voltage Connections 3 = Solder Connection Mounting 2 = 3-hole Flange 4 = Std Flange *Consult factory for load switching applications. 11.9 .47 13.5 .53 18.8 .74 10.2 .40 18 .7113.2 .52 2X 0.6 .02 COIL TERMINALS 8.1 [.32] EQ SP 0.4 .02 16.5 .65 1.5 .06 3.3 .13 10.2 .40 3-Hole Flange
Copyright © 2023 Sensata Technologies, Inc. Datasheets provided by Sensata Technologies, Inc., its subsidiaries and/or affiliates (“Sensata”) are solely intended to assist third parties (“Buyers”) who are developing systems that incorporate Sensata products (also referred to herein as “components”). Buyer understands and agrees that Buyer remains responsible for using its independent analysis, valuation, and judgment in designing Buyer’s systems and products. Sensata datasheets have been created using standard laboratory conditions and engineering practices. Sensata has not conducted any testing other than that specifically described in the published documentation for a particular datasheet. Sensata may make corrections, enhancements, improvements, and other changes to its datasheets or components without notice. Buyers are authorized to use Sensata datasheets with the Sensata component(s) identified in each particular datasheet. HOWEVER, NO OTHER LICENSE, EXPRESS OR IMPLIED, BY ESTOPPEL OR OTHERWISE TO ANY OTHER SENSATA INTELLECTUAL PROPERTY RIGHT, AND NO LICENSE TO ANY THIRD PARTY TECHNOLOGY OR INTELLECTUAL PROPERTY RIGHT, IS GRANTED HEREIN. SENSATA DATASHEETS ARE PROVIDED “AS IS”. SENSATA MAKES NO WARRANTIES OR REPRESENTATIONS WITH REGARD TO THE DATASHEETS OR USE OF THE DATASHEETS, EXPRESS, IMPLIED, OR STATUTORY , INCLUDING ACCURACY OR COMPLETENESS. SENSATA DISCLAIMS ANY WARRANTY OF TITLE AND ANY IMPLIED WARRANTIES OF MERCHANTABILITY , FITNESS FOR A PARTICULAR PURPOSE, QUIET ENJOYMENT, QUIET POSSESSION, AND NON-INFRINGEMENT OF ANY THIRD PARTY INTELLECTUAL PROPERTY RIGHTS WITH REGARD TO SENSATA DATASHEETS OR USE THEREOF. All products are sold subject to Sensata’s terms and conditions of sale supplied at www.sensata.com. SENSATA ASSUMES NO LIABILITY FOR APPLICATIONS ASSISTANCE OR THE DESIGN OF BUYERS’ PRODUCTS. BUYER ACKNOWLEDGES AND AGREES THAT IT IS SOLELY RESPONSIBLE FOR COMPLIANCE WITH ALL LEGAL, REGULATORY , AND SAFETY-RELATED REQUIREMENTS CONCERNING ITS PRODUCTS, AND ANY USE OF SENSATA COMPONENTS IN ITS APPLICATIONS, NOTWITHSTANDING ANY APPLICATIONS- RELATED INFORMATION OR SUPPORT THAT MAY BE PROVIDED BY SENSATA. Mailing Address: Sensata Technologies, Inc., 529 Pleasant Street, Attleboro, MA 02703, USA Regional head offices: United States of America Sensata Technologies Attleboro, MA Phone: 508-236-3800 E-mail: support@sensata.com Netherlands Sensata Technologies Holland B.V. Hengelo Phone: +31 74 357 8000 E-mail: support@sensata.com China Sensata Technologies China Co., Ltd. Shanghai Phone: +8621 2306 1500 E-mail: support@sensata.com CONTACT US sensata.com