G3CN202P1DC328

G3CN202P1DC328 OMRON | Alldatasheet

Document overview

Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
PDF pages: 21

Technical content

For More Detailed Information… Visit Us Online: www.components.omron.com

Browse Omron’s full range of Product information and selection guides.
Download PDF’s — datasheets, brochures, and more.
Find Omron solutions for competitive products.
Locate a Distributor and search for available inventory. Call Us: 1-847-882-2288 Monday through Friday, 7:30 a.m. to 6:00 p.m. Central Time (CT) Email Us: components@omron.com OMRON ELECTRONICS COMPONENTS LLC

55 Commerce Drive • Schaumburg, IL 60173

IT IS THE BUYER’S SOLE RESPONSIBILITY TO ENSURE THAT ANY OMRON PRODUCT IS FIT AND SUFFICIENT FOR USE IN A MOTORIZED VEHICLE APPLICATION. BUYER SHALL BE SOLELY RESPONSIBLE FOR DETERMINING APPROPRIATENESS OF THE PARTICULAR PRODUCT WITH RESPECT TO THE BUYER’S APPLICATION, END PRODUCT, OR SYSTEM. BUYER SHALL TAKE THE APPLICATION RESPONSIBILITY IN ALL CASES, BUT THE FOLLOWING IS A NON-EXHAUSTIVE LIST OF APPLICATIONS FOR WHICH PARTICULAR ATTENTION MUST BE GIVEN: (i) Outdoor use; uses involving potential chemical contamination or electrical interference, or conditions or uses not described in this document. (ii) Use in consumer products or any use in signiﬁ cant quantities. (iii) Energy control systems, combustion systems, railroad systems, aviation systems, medical equipment, amusement machines, vehicles, safety equipment, and installations subject to separate industry or government regulations. (iv) Systems, machines, and equipment that could present a risk to life or property. NEVER USE THE PRODUCT FOR AN APPLICATION INVOLVING SERIOUS RISK TO LIFE OR PROPERTY OR IN LARGE QUANTITIES WITHOUT ENSURING THAT THE END PRODUCT AS A WHOLE HAS BEEN DESIGNED TO ADDRESS RELEVANT RISKS, AND THAT THE OMRON PRODUCT IS PROPERLY RATED AND INSTALLED FOR ITS INTENDED USE. www.components.omron.com Electronic Components Master Selection Guide Relays Switches Photomicrosensors Micro Sensors Connectors Omron Electronic Components: The Quality, Flexibility and Global Support You Need YOI-E-03 © 2006 Omron Electronic Componenets Printed in the U.S.A. 06/2006 USAcovers.indd 2-3 USAcovers.indd 2-3 7/14/06 2:42:48 PM7/14/06 2:42:48 PM

4 Relays - MOS FET

G3VM-200 G3VM-350 G3VM-400 G3VM High Voltage & Dielectric G3VM Current LimitingGeneral Attributes Dimensions mm (in) Please refer to specific data sheets for all dimensional information Please refer to specific data sheets for all dimensional information Please refer to specific data sheets for all dimensional information Please refer to specific data sheets for all dimensional information Please refer to specific data sheets for all dimensional information Load voltage 0-350V (AC or DC)0-200V (AC or DC) 0-400V (AC or DC) 0-600V (AC or DC) 0-350V (AC or DC) Features • Broad product offering

Form A & Form B configurations
Ideal for Instrumentation, Broadband Systems, Measurement Devices, Data loggers, Consumer Electronics, Security Systems, Electronic Automatic Exchange Systems, Industrial Automation Equipment, Medical Equipment
1 & 2 channel configurations
Ideal for Instrumentation, Broadband Systems, Measurement Devices, Data Loggers, Consumer Electronics, Medical Equipment
Broad product offering
10kV surge withstand models available
Ideal for Instrumentation, Broadband Systems, Measurement Devices, Data Loggers, Consumer Electronics, Security Systems, Electronic Automatic Exchange Systems, Industrial Automation Equipment, Medical Equipment
Capable of switching loads up to 600V (AC and DC)
10kV surge withstand
Ideal for Instrumentation, Electronic Automatic Exchange Systems, Industrial Automation Systems, Measurement Devices, Security Systems, Medical Equipment
Current limiting of 150 to 300mA
Ideal for Electronic Automatic Exchange Systems, Multi-function Telephones, Cordless Telephones, Measurement Devices, Instrumentation Maximum Ratings and

Electrical Characteristics

0-90mA, 0-100mA, 0-110mA, 0-120mA, 0-150mA 0-50mA & 0-200mA 0-120mA 0-100mA 0-120mA Output capacitance __ _ _ _ ON resistance (typical) 40! Available switching configurations

1 Form A, 1 Form B,

1 Form A + 1 Form B

2 Form A, 2 Form B

1 Form A, 2 Form A 1 Form A, 2 Form A 1 Form A 1 Form A, 2 Form A

(typical) 0.1ms, 0.25ms, 0.3ms, 0.5ms, 1.0ms Dielectric strength (AC for 1 minute between input and output) 1,500Vrms (min.) 2,500Vrms (min.) 1,500Vrms (min.) 1,500Vrms (min.) 2,500Vrms (min.) 5,000Vrms (min.) 5,000Vrms (min.) 1,500Vrms (min.) 2,500Vrms (min.) Accessories Tape & reelTape & reel Tape & reel Tape & reel Tape & reel Available packaging & terminal choices PCB, SMT, SOP

4 PIN, 6 PIN, 8 PIN

PCB, SMT, SOP PCB & SMT

6 PIN

PCB, SMT & SOP Approved standards UL 1577UL 1577 UL 1577 UL 1577 UL 1577 turn-OFF time (typical) 0.1ms, 0.15ms, 0.5ms, 1.0ms, 3.0ms Continuous load current ECbodyREADERS.indd 4 ECbodyREADERS.indd 4 7/14/06 11:21:31 PM7/14/06 11:21:31 PM

G3VM GR G3VM LR G3VM-60 G3VM-80 G3VM-22 General Attributes Dimensions mm (in) Please refer to specific data sheets for all dimensional information Please refer to specific data sheets for all dimensional information Please refer to specific data sheets for all dimensional information Please refer to specific data sheets for all dimensional information Please refer to specific data sheets for all dimensional information Load voltage 0-20V (AC or DC) 0-40V (AC or DC) 0-20V (AC or DC) 0-40V (AC or DC) 0-60V (AC or DC) 0-80V (AC or DC) 0-20V (AC or DC) Features • Smallest MOS FET relay on the market

C x R characteristics as low as 5pF*!
Low leakage current
Very high operating speed
Ideal for IC and Memory Test Equipment, SoC Testers, Measurement Devices, Instrumentation, Medical Equipment, Broadband Systems, Data Loggers, Security Systems
C x R characteristics as low as 5pF*!
Low leakage current
Very high operating speed
Ideal for IC and Memory Test Equipment, SoC Testers, Measurement Devices, Instrumentation, Medical Equipment, Broadband Systems, Data Loggers, Security Systems
High current switching capability
Low ON-resistance
Low leakage current
Cost effective solutions
Ideal for Measurement Devices, Instrumentation, Security Systems, Medical Equipment, Alarm Controls, Consumer Electronics
High current switching capability
Low leakage current
Ideal for Broadband Systems, Measurement Devices, Instrumentation, Medical Equipment, Data Loggers, Consumer Electronics
Single input channel with dual output channels
Low ON-resistance
Ideal for Inline Interface Applications, Data Loggers, ADSL Modems and Routers, Edge Routers, Data Storage Devices Maximum Ratings and

Continuous load current 0-120mA 0-160mA 0-300mA 0-450mA 0-120mA 0-160mA 0-300mA 0-400mA 0-500mA 0-1,000mA 0-2,000mA 0-2,500mA 0-350mA 0-1,250mA 0-150mA Output capacitance 0.8pF (typ.) 1.0pF (typ.) 5.0pF (typ.) 10pF (typ.) 1.0pF (typ.) 5.0pF (typ.) 10pF (typ.) _ _ _ ON resistance (typical) 0.12! (max.) 7! (max.) 1! (typ.) 0.11! & 1.0! 2! Available switching configurations

1 Form A1 Form A 1 Form A 1 Form A Dual 1 Form A

(typical) 0.3ms0.3ms 0.8ms 1.0ms 1.4ms 0.3ms 2.0ms 0.5ms Dielectric strength (AC for 1 minute between input and output) 1,500Vrms (min.)1,500Vrms (min.) 1,500Vrms (min.) 2,500Vrms (min.) 1,500Vrms (min.) 2,500Vrms (min.) Accessories Tape & reelTape & reel Tape & reel Tape & reel Tape & reel Available packaging & terminal choices SOP

4 PIN

SOP, PCB, SMT

4 PIN, 6 PIN

PCB & SMT

8 PIN

Approved standards UL 1577UL 1577 UL 1577 UL 1577 UL 1577 turn-OFF time (typical) 0.3ms0.3ms 0.1ms 0.2ms 0.6ms 0.3ms 0.7ms 0.5ms ECbodyREADERS.indd 5 ECbodyREADERS.indd 5 7/27/06 8:32:01 AM7/27/06 8:32:01 AM

6 Relays - Low Signal

G6J-Y G6K G6H G6S G6AGeneral Attributes Dimensions mm (in) 5.30 H x 10.20 L x 6.70 W (0.21 x 0.40 x 0.26) 10.0 H x 10.6 L x 5.7 W (0.39 x 0.42 x 0.22) 5.08 H x 13.97 L x 8.89 W (0.20 x 0.55 x 0.35) 9.40 H x 15 L x 7.50 W (0.37 x 0.59 x 0.30) 8.40 H x 20.20 L x 10.10 W (0.33 x 0.80 x 0.40)

Features

Contact form 2 Form C2 Form C 2 Form C 2 Form C 2 Form C, 4 Form C Contact type Bifurcated crossbarBifurcated crossbar Bifurcated crossbar Bifurcated crossbar Bifurcated crossbar Rated load (under resistive load) 0.3A @ 125VAC, 1A @ 30VDC 0.3A @ 125VAC, 1A @ 30VDC 0.5A @ 125VAC, 1A @ 30VDC 0.5 @ 125VAC, 2A @ 30VDC Contact material Ag with Au cladAg with Au alloy clad Ag with Au clad Ag with Au clad; AgPd with Au clad Ag with Au clad; AgPd with Au clad Max. operating voltage 125VAC, 60VDC125VAC, 110VDC 125VAC, 110VDC 250VAC, 220VDC 250VAC, 220VDC Max. switching capacity under resistive load 37.5VA, 30W37.5VA, 30W (NO) 62.5VA, 33W 62.5VA, 60W 125VA, 60W Min. electrical service life (operations at rated load) 100,000100,000 100,000 100,000 500,000 Min. permissible load (for reference only) 10µA @ 10mVDC10µA @ 10mVDC 10µA @ 10mVDC 10µA @ 10mVDC 10µA @ 10mVDC Coil Information Coil voltage 3, 4.5, 5, 6, 9, 12, 24VDC3, 4.5, 5, 12, 24VDC 3, 5, 6, 9, 12, 24, 48VDC 3, 4.5, 5, 6, 9, 12, 24VDC 3, 5, 6, 9, 12, 24, 48VDC Power consumption 100mW (standard and latching) 140mW (230mW for DC24) 140mW (standard) 140mW (standard) 140mW, 200mW (latching) 200mW (DPDT standard) 180mW (DPDT latching) 360mW (4PDT standard) Characteristics Dielectric strength between coil & contacts (50/60 Hz for 1 minute) 1,500VAC1,500VAC 1,000VAC 2,000VAC 1,000VAC Terminal choices SMT Gullwing, SMT Inside-L, PCB SMT Gullwing, PCB PCB (G6H), SMT Gullwing (G6H-2F) SMT Gullwing, SMT Inside-L, PCB PCB Packaging Tape & reel availableTape & reel available Tape & reel available Tape & reel available – Approved standards Bellcore 2.5kV / Telcordia GR-1089-CORE 2.5kV between coil and contacts Bellcore 2.5kV / Telcordia GR-1089-CORE 2.5kV between coil and contacts UL, CSA, (FCC Part 68) Bellcore 2.5 kV / Telcordia GR-1089-CORE 2.5 kV (between coil and contacts) UL, CSA, (FCC Part 68)

Slimline, 2 Form C,

1 Amp relay

SMT & PCB versions
2.5kV surge withstand
Available in SMT & PCB
Latching & non-latching versions
Ideal for Telecom, Test & Measurement, Medical, Security, Computer Peripheral, Office Automation
Small real estate,

2 Form C, 1 Amp relay

100mW power consumption
2.5kV surge withstand
SMT & PCB versions
Latching & non-latching models
Ideal for Telecom, Test & Measurement, Medical, Security, Office Automation, Computer Peripheral
Low profile (5mm),

2 Form C, 1 Amp relay)

Available in SMT & PCB
1.5kV surge withstand
140mW power consumption
Ideal for Telecom, Test & Measurement, Medical, Security, Office Automation, Computer Peripheral
Industry standard,

2 Form C, 2 Amp relay

2.5 kV surge withstand
SMT gullwing, SMT inside-L, PCB models
Latching & non-latching versions
European version available (supplemen- tary insulation at 250V at pollution degree 2 per EN60950/EN41003)
Ideal for Telecom, Thermostats, Medical, Test & Measurement, Security
Industry standard,
200mW, 400mW versions
2 Pole & 4 Pole models
Latching & non-latching versions
1.5kV surge withstand
Ideal for Telecom, Test & Measurement, Security 0.3A to 0.5A @ 125VAC, 1A to 2A @ 30VDC ECbodyREADERS.indd 6 ECbodyREADERS.indd 6 7/23/06 6:42:10 PM7/23/06 6:42:10 PM

G5A G5V-1 G6L G5V-2 G6EGeneral Attributes Dimensions mm (in) 10.0 H x 12.50 L x 7.50 W (0.39 x 0.49 x 0.30) 8.38 H x 16 L x 9.9 W (0.33 x 0.63 x 0.39) 4.5 H x 10.6 L x 7.0 W (0.18 x 0.42 x 0.28 11.43 H x 20.32 L x 9.91 W (0.45 x 0.80 x 0.39) 8.38 H x 16 L x 9.9 W (0.33 x 0.63 x 0.39) Features • General use, 1 Form C,

150mW power consumption
1.5kV surge withstand
Ideal for Telecom, Security, Computer Peripheral
General use, 2 Form C,
Semi-sealed or fully- sealed construction
Ideal for Telecom, Security, Computer Peripheral, Office Automation
Very low profile,

1 Form A, 1 Amp relay

1.5kV surge withstand
SMT & PCB versions
Ideal for Security & General Use
2 Form C, 1-2 Amp relay
Ideal for general use
Industry standard footprint
150mW, 360mW & 500mW coil power versions
1.5 kV surge withstand
General use, 1 Form C,

3 Amp relay

2.5 kV surge withstand
200mW, 400mW models
Latching and non-latching versions Contact Information Contact form 1 Form C2 Form C 1 Form A 2 Form C 1 Form C Contact type Single crossbarBifurcated crossbar Single crossbar Bifurcated crossbar Bifurcated crossbar Rated load (under resistive load) 0.5A @ 125VAC, 1A @ 24VDC 0.5A @ 24VAC, 1A @ 24VDC 0.3A @ 125VAC, 1A @ 24VDC 0.5A @ 125VAC, 2A @ 30VDC 0.4A @ 125VAC, 2A @ 30VDC Contact material Ag with Au cladAg with Au clad Ag with Au clad Ag with Au clad Ag with Au clad Max. operating voltage 125VAC, 60VDC125VAC, 125VDC 125VAC, 60VDC 125VAC, 125VDC 250VAC, 220VDC Max. switching capacity under resistive load 62.5VA, 30W37.5VA, 33W 37.5VA, 24W 62.5VA, 60W 50VA, 60W Min. electrical service life (operations at rated load) 100,000100,000 100,000 300,000 100,000 Min. permissible load (for reference only) 1mA @ 5VDC1mA @ 5VDC 1mA @ 5VDC 10µA @ 10mVDC 10µA @ 10mVDC Coil Information Coil voltage 5, 6, 9, 12, 24VDC5, 6, 9, 12, 24, 48VDC 3, 4.5, 5, 12, 24VDC 3, 5, 6, 9, 12, 24, 48VDC 3, 5, 6, 9, 12, 24, 48VDC Surge withstand 1.5kV (10 x 160µs)_ – 1.5kV (10 x 160µs) 2.5kV (2 x 10µs) Power consumption 150mW200mW (standard & latching) 180mW (standard) 500mW (standard) 360mW (high-sensitivity) 150mW (ultra-sensitive) 200mW (standard) 400mW (standard) Characteristics Dielectric strength between coil & contacts (50/60 Hz for 1 minute) 1,000VAC1,000VAC 1,000VAC 1,000VAC 1,500VAC Terminal choices PCBPCB PCB, SMT Gullwing PCB PCB Packaging –– Tape & reel available – – Approved standards UL, CSAUL, CSA UL/CSA (FCC Part 68) UL, CSA UL/CSA (FCC Part 68) Bellcore 2.5kV / Telcordia GR-1089-CORE 2.5kV between coil and contacts ECbodyREADERS.indd 7 ECbodyREADERS.indd 7 7/14/06 11:21:43 PM7/14/06 11:21:43 PM

www.components.omron.com Relays - Low Signal RF/HF G6W G6Y G6Z G6K-RFGeneral Attributes Dimensions mm (in) 9.20 H x 20.70 L x 11.70 W (0.36 x 0.81 x 0.46) 8.9 H x 20 L x 8.6 W (0.35 x 0.79 x 0.34) 5.4 H x 10.3 L x 6.9 W (0.21 x 0.41 x 0.27) Switching 1A max. 0.5A max. 1A max. Features • 900MHz+ HF relay

1 Form C
Micro strip line technology
Ideal for CATV, Digital TV tuners, Test & Measurement 8.9 H x 20 L x 9.4 W (0.35 x 0.79 x 0.37) 0.5A max.
5GHz+ HF relay
1 Form C
Tri-plate micro strip line technology
Latching & non-latching models
SMT and PCB versions
Ideal for Base Station LNA & TMA switching, Test & Measurement, Broadcast, FWA
2.6GHz+ HF relay
1 Form C
Micro strip line technology
75 ! & 50 ! impedance models
Latching & non-latching models
Reverse terminal configurations
Y & E terminal configurations
SMT and PCB versions
Ideal for Base Station LNA & TMA switching, CATV, Digital TV tuners, Test & Measurement, Broadcast, FWA
1GHz+ HF relay
2 Form C
100mW coil power
Smallest 2 Form C on the market
Ideal for Test & Measurement, CATV, Digital TV tuners HF Characteristics Isolation 65dB (900MHz)65dB (2GHz) 60dB (2.5GHz) 40dB (5.0GHz) 60 - 65dB (900MHz) 30 - 45dB (2.6GHz) 20 - 30dB (1GHz) Contact type(s) Twin crossbarTwin crossbar Twin crossbar Bifurcated crossbar Rated load (under resistive load) 10mA @ 30VAC; 10mA @ 30VAC;

900 MHz, 1W

10mA @ 30VAC 10mA @ 30VDC 2.5GHz, 10W 10mA @ 30VAC; 10mA @ 30VDC; 900MHz, 10W 0.3A @ 125VAC; 1A @ 30VDC Contact material Au clad Cu alloyAu clad Cu alloy Au clad Cu alloy Au alloy on Ag base Max. operating voltage 30VDC, 30VAC30VDC, 30VAC 30VDC, 30VAC 60VDC, 125VAC Max. switching capacity under resistive load 10VA, 10W10VA, 10W 10VA, 10W 37.5VA, 30W Min. electrical service life (operations at rated load) 300,000 300,000 300,000 300,000 Coil Information Coil voltage 3, 4.5, 5, 6, 9, 12, 24VDC3, 4.5, 9, 12, 24VDC 3, 4.5, 5, 9, 12, 24VDC 3, 4.5, 5, 6, 9, 12, 24VDC Power consumption 200mW200mW (standard) 200mW (single latching) 360mW (dual latching) 200mW (standard) 200mW (single latching) 360mW (dual latching) 100mW Characteristics Dielectric strength between coil & contacts (50/60 Hz for 1 minute) 1,000VAC1,000VAC 1,000VAC 750VAC Terminal choices PCBPCB, SMT Gullwing PCB, SMT Gullwing SMT Gullwing Packaging / Options –– Tape & reel available – Contact Information Contact form 1 Form C1 Form C 1 Form C Insertion loss 0.5dB (900MHz)0.2dB (2GHz) 0.2dB (2.5GHz) 0.4dB (5.0GHz) 0.1 - 0.2dB (900MHz) 0.3 - 0.5dB (2.6GHz) 0.2dB (1GHz) VSWR 1.5 (900MHz)1.2 (2GHz) 1.2 (2.5GHz) 1.5 (5.0GHz) 1.1 - 1.2 (900MHz) 1.3 - 1.5 (2.6GHz) 0.2dB (1GHz)

2 Form C

39.0 H x 34.0 L x 13.2 W (1.54 x 1.34 x 0.52) 100mA max.

26.5GHz bandwidth
Coaxial HF relay
60dB isolation (26.5GHz)
Contact carry power of 120W at 3GHz
Available in failsafe & TTL-driven models
Also available in non-latching and dual latching configuraitons
Ideal for Mobile Communications Infrastructure Equipment, Broadcast Equipment, Test and Measurement Equipment, Wireless LAN 60dB (26.5GHz) 65dB (12.4GHz) Twin crossbar 100mA @ 30VDC Au clad Cu alloy 30VDC 120W (3GHz) 5,000,000 4.5, 5, 12, 15, 24, 28VDC 500mW (dual latching) 700mW (failsafe) 500VAC SMA Terminals, Solder Terminals, Pin Terminals Connector Cables 0.8dB (26.5GHz) 0.4dB (12.4GHz) 0.3dB (8GHz) 1.7 (26.5GHz) 1.35 (12.4GHz) 1.25 (8GHz)

1 Form C

NEW! ECbodyREADERS.indd 8 ECbodyREADERS.indd 8 7/14/06 11:21:45 PM7/14/06 11:21:45 PM

(@ 1800 ops./hr.) Coil Information Coil voltage Approved standards Contact Information Contact form

Small compact form for 10 kV impulse and 5A switching capability
Meets EN tracking resistance CTI>250 200,000 (resistive): 3A @ 30VDC 100,000: 5A @ 250VAC
High capacity 5A version available
Meets EN tracking resistance CTI>250
HA version for home appliances (resistive load) 200,000 (resistive): 3A @ 125VAC/30VDC
High insulation between coil & contact
Impulse withstand of 8kV
Fully Sealed
Incorporates 5A NO contact For resistive loads: 200,000: 3 A (NO)/3 A (NC) at

125 VAC; 50,000: 5 A (NO)/3 A (NC)

at 125 VAC; 50,000: 5 A (NO) at

250 VAC; 10,000: 3 A (NC) at

250 VAC; 10,000: 5 A (NO)/3 A (NC)

UL, CSA, VDEUL, CSA, VDE UL, CSA, VDE UL, CSA, TUV, SEV Terminal choices PCBPCB PCB PCB Dimensions mm (in) 15.3 H x 20.5 L x 7.2 W (0.60 x 0.81 x 0.28) max. 15.3 H x 20.5 L x 7.2 W (0.60 x 0.81 x 0.28) 15.8 H x 20.3 L x 10.3 W (0.62 x 0.80 x 0.41) 12.5 H x 17.5 L x 6.5 W (0.49 x 0.69 x 0.26) Operating temperature -40 to +85°C-40 to +70°C -40 to +70°C -25 to +70°C

1 Form A1 Form A 1 Form A 1 Form A

Contact type(s) Single buttonSingle button Single button Single button Contact material(s) AgSnInAgNi AgNi/AgSnIn AgNi/AgSnIn Impulse withstand voltage (1.2 x 50µ sec. unless noted) 10kV10kV 8kV 6kV

Subminiature, slim lightweight design
Low power consumption
Fully Sealed Minimum permissible load (for reference only) 10mA @ 5VDC10mA @ 5VDC 10mA @ 5VDC 10mA @ 5VDC 5, 12, 18, 24VDC5, 12, 18, 24VDC 5, 9, 12, 24VDC 5, 12, 24, 48, 110/120VDC Power consumption 200mW200mW 400mW 200mW 300,000: 2A @ 30VDC/250VAC 70,000: 5A @ 30VDC/250VAC Accessories N/AN/A N/A Socket for back connecting, sockets with PCB terminals Insulation class Class BClass A Class B Class B General Attributes Switching 3A/5A3A/5A 5A(NO)/3A(NC) 5A 4,000VAC (coil-contact) 750VAC (open contacts) 4,000VAC (coil-contact) 750VAC (open contacts) 4,000VAC (coil-contact) 1,000VAC (open contacts) 3,000VAC (coil-contact) 750VAC (open contacts) Dielectric strength (50/60 Hz for 1 minute) Characteristics Max. switching capacity (and resistive load) 1,250VA, 90W375VA, 90W 1,250VA, 150W(NO) 750VA, 30W(NC) 1,250VA, 150W Protection level Semi-sealedSemi-sealed Semi-sealed Semi-sealed NEW! NEW! NEW! ECbodyREADERS.indd 9 ECbodyREADERS.indd 9 7/14/06 11:21:49 PM7/14/06 11:21:49 PM

10 Relays - Power PCB

Slim 5mm width, & reduced PCB area (103mm2) ideal for high-density mounting
Highly efficient magnetic circuit for high sensitivity
UL Class I, Division II approved for hazardous locations 5, 12, 24VDC
Slim 5mm for max. density mounting
High sensitive coil option reduces power consumption
Meets EN reinforced insulation requirement for control equipment
Fully sealed
Resistant to mechanical shock 5, 12, 24VDC
1.5mm contact gap x 2 poles=3mm total gap meeting UPS standards
Dimensions & mounting holes are same as G2R relay series
Sealed construction, standard
Meets EN tracking resistance CTI > 250
UL508/CSA 22.2 12, 24VDC Terminal choices PCBPCB PCB PCB Dimensions mm (in) 17.7 H x 20.3 L x 5.08 W (0.70 x 0.80 x 0.20) 12.4 H x 20 L x 5.0 W (0.60 x 0.81 x 0.28)

25.5 H x 29 L x 13 W

(1.00 x 1.14 x 0.51) 9.91 H x 20.07 L x 9.91 W (0.39 x 0.79 x 0.39) Operating temperature -40 to +85°C-40 to +85° C -40 to +70°C -25 to +70°C

1 Form A1 Form A 2 Form A 1 Form A, 2 Form A, 2 Form B

(1.2 x 50µ sec. unless noted) 5.08kV6kV 10kV —

Subminiature and low power
Sealed construction standard
Single & dual coil latching available Minimum permissible load (for reference only) 10mA @ 5VDC 5mA @ 24VDC 10mA @ 5VDC 10mA @ 5VDC 5, 6, 12, 24VDC Power consumption 120mW180mW 120mW (high-sensitivity) 800mW 200mW (1 pole) 300mW (2 pole) Electrical service life (@ 1800 ops./hr.) (resistive load) 100,000: 3A @ 30VDC/250VAC 6,000: 5A @ 250VAC/24VDC 100,000: 5A @ 30VDC/250VAC 80,000 (high sensitivity): 5A @ 30VDC/250VAC 10,000: 8A @ 250VAC 100,000: 5A @ 30 VDC/250VAC 8A @ 30 VDC/250VAC (high- capacity) Accessories N/ASocket for back connecting, sockets with PCB terminals N/A Sockets & clips for back connecting sockets with PCB terminals Insulation class Class BClass B Class B Class A Approved standards UL, CSA, VDE, EN, IEC 61131-2, IEC 61010 UL, CSA, VDE UL, CSA, VDE (O700/0110) UL, CSA, (FCC Part 68) SEV, TUV, IEC Protection level Fully sealedFully Sealed Fully sealed General Attributes Switching 5A 5A 8A 8A/5A Contact type(s) Single buttonSingle button Single button Single button Contact material(s) Ag-AlloyAgNi AgSnO2 AgSnO2 3,000VAC, (coil-contact) 750VAC, (open contacts) 3,000VAC (coil-contacts) 750VAC (open contacts) 5,000VAC, (coil-contact) 3,000VAC, (contacts pole-pole) 1,000VAC (open contacts) 4,000VAC (coil-contact) 2,000VAC (contacts pole-pole) 1,000VAC (open contacts) Dielectric strength (50/60 Hz for 1 minute) Characteristics Max. switching capacity (resistive load) 750VA, 90W1,250VA, 150W 2,000 VA 1,250VA, 150W 2,000VA, 240W (high-capacity type) Fully sealed NEW! NEW! ECbodyREADERS.indd 10 ECbodyREADERS.indd 10 7/14/06 11:22:05 PM7/14/06 11:22:05 PM

Dimensions mm (in) Minimum permissible load (for reference only) (@ 1800 ops./hr.) (resistive load) Impulse withstand voltage (1.2 x 50µ sec. unless noted) Insulation class Contact type(s) Contact material(s) Coil Information Coil voltage Power consumption Terminal choices Accessories Contact Information Contact form PCB 19 H x 22.5 L x 16.5 W (0.75 x 0.89 x 0.65) -40 to +85°C

1 Form A, 1 Form C

AgSnO2 /AgSnIn (either with gold plating option) 4.5kV Class B, F (UL/CSA ONLY)

Small "sugar cube" size used as common platform
Sealed construction optional
High capacity contacts:-E
Increased (0.8) contact gap:-G8
Special application versions available 5, 6, 9, 12, 24, 48VDC 100mA @ 5VDC, 400mW /360mW available 100,000: 5A @ 250 VAC (AgSnO2)

6 FLA, 6 LRA @ 120VAC @ 85°C

TV-5 @120VAC 50,000: 10A @ 250VAC 50,000 16A @ 250VAC 1/8 HP @ 120 VAC (@ 85°C) 30,000: 12A @ 120VAC N/A PCB 15 H x 28.5 L x 10 W (0.59 x 1.12 x 0.39) -40 to +85°C

8 mm coil/contact creepage
Low profile
Sealed construction standard
Ideal for switching contactors, solenoids & motors 5, 6, 12, 24, 48VDC 10mA @ 5 VDC 220mW, 250mW (DC24/48) 100,000: 8A @ 250VAC 5A @ 30VDC N/A Class B PCB 15.2 H x 19.6 L x 15.6 W (0.60 x 0.77 x 0.61) -40 to +85°C

4.5kV

Sealed construction optional
10A switching in low profile "sugar cube" package
Optional -25 type meets stringent EU requirements, including tracking resistance CTI > 250 & extended life
4.5kV impulse withstand
Low power consumption 3, 5, 6, 9, 12, 24, 36, 48VDC 100mA @ 5VDC 360mW (standard) 400mW (“-40” style) 600mW (“-60” style) 100,000: 10A @ 120VAC/250VAC 8A @ 30VDC N/A Class B, F (-25 type) PCB 15.8 H x 20.3 L x 10.3 W (0.62 x 0.80 x 0.41) -40 to +105°C
Compact PCB relay with high insulation
With stands impulse of 8kV coil-contacts
Meets EN tracking resistance CTI >250
Class F coil insulation standard
Low power consumption 5, 12, 24VDC 10mA @ 5VDC 400mW Form C 200mW Form A 2,000VAC (coil-contact) 750VAC (open contacts) 4,000VAC (coil-contact) 1,000 (open contacts) 2,000VAC (coil-contact) 750VAC (open contacts) 4,000VAC (coil-contact) 1,000VAC (open contacts) 200,000: 3A (NO)/3 A (NC) @ 125VAC 100,000: 3A (NO)/3 A (NC) @ 250VAC 5A (NO)/3 A (NC) @ 30VDC 50,000: 10A (NO) @125VAC (900 ops. per hour) N/A Class F Protection level Standard: Semi-sealed/vented, Option: sealed Sealed Standard: Semi-sealed/vented, Option: sealed General Attributes Switching 10A (16A for Semi-sealed "E" type) 8A 10A 10A (NO contacts) Dielectric strength (50/60 Hz for 1 minute) Characteristics Max. switching capacity (resistive load) Standard: Semi-sealed/vented, Option: sealed 1,200VA,240W2,000VA,150W 1,200VA, 240W 2,500VA, 240W (-25 type) 1,250VA,150W (NO)

375 VA, 90W (NC)

NEW! NEW! Approved standards UL, CSA, TUV, VDEUL, CSA, VDE UL, CSA, VDE UL, CSA, VDE ECbodyREADERS.indd 11 ECbodyREADERS.indd 11 7/14/06 11:22:22 PM7/14/06 11:22:22 PM

12 Relays - Power PCB

(for reference only) (@ 1800 ops./hr.) (resistive load) Impulse withstand voltage (1.2 x 50µ sec. unless noted) Insulation class Contact type(s) Contact material(s) Coil Information Coil voltage Power consumption Terminal choices Accessories Approved standards Contact Information Contact form UL, CSA, SEV, SEMKO, IEC/TUV PCB Optional: PCB+quick-connect contact terminals -25 to +70ºC

1 Form A

4.5kV Class B

Fully sealed or flux-sealed
High capacity versions
High sensitivity types
PCB or PCB+QC versions 5, 12, 24VDC 100mA @ 5VDC 200mW (standard & high capacity) 150mW (high sensitivity) 100,000: 10A @ 30VDC 15A @ 110VAC (high capacity) 10A @ 250VAC (fully sealed, std) 300,000: 10A @ 250VAC (semi-sealed) N/A UL, CSA, VDE, SEV PCB, self clinching -40 to +70°C

1 Form A + 1 Form B, 1 Form A

4.5kV

Low power consumption for high power switching
Low profile 10A power relay
Single & dual coil latching types available
Sealed construction available
Meets EN tracking resistance CTI > 250 3, 5, 6, 12, 24VDC 10mA @ 5VDC 200mW (monostable & single coil latching) 280mW (dual coil latching) 100,000: 10A @ 30VDC/250VAC Socket for QC contact terms., PCB terms., socket clip Class A UL, CSA, SEMKO TUV, VDE PCB -40 to +70°C
Ideal for TVs, tuner, & audio power supply switching, both front panel and remote controlled. Also auxiliary switched power outlets on tuners and TVs.
A variety of versions in a single standard package meet most UL/FCC power isolation requirements
Rated to 100A inrush @ 250 VAC for minimum 40,000 operations 5, 6, 9, 12, 24 VDC (4.5 VDC non-standard) 10mA @ 5 VDC 250mW 530mW (high capacity, extended electrical life) 150mW (under development) 30,000: 54@277 VAC 5A @ 30VDC / 277VAC (high capacity type) 25,000: TV-5 TV-8 (optional) 6,000: 5A @ 30VDC 100,000: 10A @ 250 VAC (high-capacity type) N/A Class B 2,500VAC (coil-contact) 1,000VAC (open contacts) 2,000VAC (coil -contact) 2,000VAC (contacts pole-pole) 1,000VAC (open contacts) 4,000VAC (coil-contacts) 1,000VAC (open contacts) Protection level Semi-sealed Fully sealed option Semi-sealed Fully sealed option Semi-sealed General Attributes Dielectric strength (50/60 Hz for 1 minute) Characteristics Max. switching capacity (resistive load) 2,500VA, 300W2,500VA, 300W 2,000VA, 240W (latching) N/A UL, CSA, VDE PCB (optional self-clinching) PCB coil /quick connect contact Flange mount all quick connect Dimensions mm (in) 11 H x 16 L x 22 W (10A) (0.43 x 0.63 x 0.87)

11 H x 22 L x 25 W (15A)

9.91 H x 20.07 L x 14.99 W (0.39 x 0.79 x 0.59)

25 H x 24 L x W 10

(0.985 x 0.95 x 0.40) Multiple, refer to catalog. Basic: -55°C to +105°C

1 Form A, 1Form C

AgSnIn (other alloys available) 6kV 5, 9, 12, 24, 48, 110VDC Other coil voltages available 500mA @ 5VDC 900mW 100,000: 30A @ 277VAC (NO) 50,000: 30A @ 277VAC (NC) Consult catalog for other ratings N/A Class F 2,500VAC, (coil-contact) 1,500VAC, (open contacts) Switching 10A (15A high capacity)10A 5A (10A option) 30A (SPST) 10A-30A (SPDT)

1 Form A: 7,500VA, 560W

1 Form C: 5000/2500VA, 560W/280W*

Open frame, Vented/semi-sealed, Fully sealed

Industry standard form with 30A switching
UL Class F insulation standard
Wide range of coil ratings
Various sealing forms: open frame, vented/flux sealed, fully sealed
UL508/UL873 Column A spacings
Meets EN Tracking resistance CTI > 175
High dielectric at open contacts NEW TYPES * N.O. Contact / N.C. Contact ECbodyREADERS.indd 12 ECbodyREADERS.indd 12 7/14/06 11:22:28 PM7/14/06 11:22:28 PM

Dimensions mm (in) Minimum permissible load (@1800 ops./hr.) (@ 1800 ops./hr.) (resistive load) Impulse withstand voltage (1.2 x 50µ sec. unless noted) Insulation class Contact type(s) Contact material(s) Coil Information Coil voltage Power consumption Terminal choices Accessories Approved standards Contact Information Contact form UL, CSA, VDE PCB 15.7 H x 28.8 L x 12.5 W (0.61 x 1.14 x 0.49) -40 to +70°C (AC coil) -40 to +85°C (DC coil)

High dielectric due to large internal creepage distances.
AC coil in industry standard package 24, 100, 115/120, 200, 230/240 VAC 5, 12, 24, 48VDC 40mA @ 24VDC 0.75VA 400mW (430mW @ 48VDC) 50,000: 16A @ 24VDC/277VAC (NO) 25,000: TV-5 (NO) N/A 6,000VAC (coil-contact) 1,000VAC (open contacts) Protection level Semi-sealed General Attributes Switching 16A max. (NO), 5A max. (NC) Dielectric strength (50/60 Hz for 1 minute) Characteristics Max. switching capacity (resistive Load) 4,000VA, 384W (NO) 1,250VA, 120W (NC) UL, CSA, EN 60335 PCB (coil terminals) Quick-connect (contact terminals) 15.7H x 40.4 L x 12.5 W (0.61 x 1.60 x 0.49) -40 to +105°C

12, 24VDC Consult catalog for other coil voltages 4,000VA, 400mW (430mW for 48VDC) 50,000: 16A @ 24VDC/277VAC 20A @ 24 VAC (@ 85ºC) 25,000: TV-5 N/A Class F 5,000 VAC, (coil-contact) 1,000 VAC, (open contacts) 16A max. Semi-sealed

Increased temperature & insulation ratings in low profile package.
Simplifies PCB design by allowing removal of high power PCB tracings.
Contact/load terminals in both 5mm for RAST5 connection & 7.5mm existing standard
Single mounting/soldering process for both types of terminals reduces PCB assembly costs. UL, CSA, SEV SEMKO, VDE, TUV PCB, plug in quick-connect (flange mount)

(1 x 1.14 x 0.51) -40 to +70°C (+85°C option)

1 Form A, 1 Form C, 2 Form A,

Single button, bifurcated button Ag alloy 10kV

High dielectric withstand
8mm coil/contact spacing
1 & 2 pole models
3mm contact gap version available (see G2RG)
Meets EN tracking resistance CTI > 250 12, 18, 24, 48, 50, 100, 110/120, 110, 120, 200/220, 220, 230, 240VAC 110VDC 1 pole: 100mA @ 5VDC; 2 pole: 10mA @ 5VDC 0.9VA, 530mW (standard) 360mW (high sensitivity) 850mW (latching set), 600mW (latching reset) 100,000: (high-capacity type) 16A @ 30VDC/250VAC Consult catalog for other ratings N/A Class B available UL, CSA, VDE PCB, optional quick-connect contact terminals (-TP type) 15.5 H x 29 L x 12.7 W (0.61 x 1.14 x 0.50) -40 to +85°C

Single button (bifurcated available) AgSnO2 (1 pole); AgNi (2 pole) 10kV

Low profile for power rating
High isolation
Class F insulation option
Low power consumption
Quick connect terminal option
Meets EN tracking resistance CTI > 250 5, 12, 24, 48VDC 40mA, 24VDC 400mW (430mW for 48VDC) 5,000VAC (coil-contact) 1,000 VAC (open contacts) 5,000VAC (coil-contact) 1,000 VAC (open contacts) N/A Class F Semi-sealed Fully sealed option 16A max. 16A max. Semi-sealed Fully sealed option 4,000VA, 480W (high-capacity 1 pole) Consult catalog for other ratings 4,000VA, 384W (high-capacity 1 pole) Consult catalog for other ratings 100,000: 16A @ 250VAC 6,000: 25A @ 240VAC Consult catalog for other ratings NEW! NEW! ECbodyREADERS.indd 13 ECbodyREADERS.indd 13 7/14/06 11:22:44 PM7/14/06 11:22:44 PM

14 Relays - DC Power

The switching and driving sections are isolated, gas injected and hermetically sealed. This advanced construction requires no arc space, saves space, & helps ensure safety. Yes Yes Model Classification *Electrical endurance Max. switching current Rated carry current Short-time carry current *Max. interruption current *Overload interruption Reverse polarity interruption Coil Information Rated voltage Power consumption Mechanical endurance Insulation resistance Between Coil & Contacts Between contacts of the same polarity Dielectric strength Between coil & contacts Between contacts of the same polarity Impulse withstand voltage Ambient operating temperature Terminals Screw terminals Lead wire output *When using a varistor as protective circuit against reverse surge in the relay coil G9EC-1(-B) Switching/current conduction Largest capacity in series Carries/switches 400V, 200A loads SPST-NO Double-break, single 30m! max. (0.2m! typical) 0.1V max. (for a carry current of 200A) 400VDC, 200A, 3,000 operations min. 200A 200A 300A (15min.) 1,000A @ 400VDC (10 times) 700A @ 400VDC (40 times min.) -200A @ 200VDC (1,000 times min.) 12, 24, 48, 60 & 100VDC Approx. 11W 200,000 operations min. 1,000M! min. 1,000M! min. 2,500VAC for 1min. 2,500VAC for 1min. 4,500V -40 to +50°C (with no icing or condensation) G9EA-1(-B) Switching/current conduction Standard compact model carries/switches 400VDC, 60A loads SPST-NO Double-break, single 30m! max. (0.6m! typical) 0.1V max. (for a carry current of 60A) 120VDC, 100A, 3,000 operations min. 400VDC, 60A, 3,000 operations min. 400VDC, 30A, 30,000 operations min. 100A 60A 100A (10 min.) 600A @ 300VDC (5 times) 180A @ 400VDC (100 times min.) -60A @ 200VDC (1,000 times min.) 12, 24, 48, 60 & 100VDC Approx. 5 to 5.4W 200,000 operations min. 1,000M! min. 1,000M! min. 2,500VAC for 1min. 2,500VAC for 1min. 4,500V -40 to +70°C (with no icing or condensation) G9EA-1(-B)-CA High-current conduction Carries 100A Low contact resistance when carrying current SPST-NO Double-break, single 10m! max. (0.3m! typical) 0.1V max. (for a carry current of 100A) 400VDC, 30A, 1,000 operations min. 120VDC, 30A, 2,500 operations min. 30A 100A 150A (10 min.) 100A @ 120VDC (150 times min.) 12, 24, 48, 60 & 100VDC Approx. 5 to 5.4W G9EB (-1B) Switching/current conduction Smallest in series 250VDC, 25A loads SPST-NO Double-break, single 30m! max. 0.1V max (for a carry current of 25A) 250VDC, 25A, 30,000 operations min. 25A 25A 50A (5 min.), 40A (10min.) 100A @ 250VDC (5 times) 50A @ 250VDC (50 times min.) 12, 24, 48, 60 & 100VDC Approx. 2W 100,000 operations min. 1,000M! min. 1,000M! min. 2,500VAC for 1min. 2,500VAC for 1min. 4,500V 200,000 operations min. 1,000M! min. 1,000M! min. 2,500VAC for 1min. 2,500VAC for 1min. 4,500V -40 to +70°C (with no icing or condensation) -40 to +70°C (with no icing or condensation) Yes Yes Yes Yes Yes Yes ECbodyREADERS.indd 14 ECbodyREADERS.indd 14 7/14/06 11:22:49 PM7/14/06 11:22:49 PM

UL, CSA, TUV, VDE, SEMKO

2 Form C, 3 Form C

UL, CSA

4 Form C

UL, CSA, SEV, CE, VDE, IMA

2 Form C, 4 Form C

UL, CSA, SEV, VDE, CE (UL, CSA only with varistors) Dimensions mm (in) 52.58 H x 34.54 L x 34.54 W (2.07 x 1.36 x 1.36) 35 H x 28.5 L x 22 W (1.38 x 1.12 x 0.87) 36 H x 28 L x 21.5 W (1.42 x 1.10 x 0.85) 35.56 H x 27.94 L x 21.59 W (1.40 x 1.10 x 0.85)

1 Form C, 2 Form C,

3 Form C, 4 Form C

Terminal choices Plug-inPlug-in PCB, plug-in Track mounted socket PCB with .187/.250 QC Electrical service life (@ 1800 ops./hr.) (resistive load) 100,000 min. 10A @ 28VDC/250VAC 100,000 min. 3A@24VDC/110VAC (50,000 min. bifurcated) 2P 500,000: 5A @ 30VDC/250VAC 4P 200,000: 3A @ 30VDC/250VAC 100,000: 3A@30VDC/250VAC (bifurcated) 200,000 min: 15A @ 24VDC/110VAC 10A @ 24VDC/110VAC 500,000 min: (2 pole) 10A @ 110VAC Contact material(s) Ag (fine silver)AgSnIn AgNi Ag-Alloy DC Coil: 0.9W 1.1VA, 0.9W (1 pole); 1.1VA, 0.9W (DPDT); 1.6VA, 1.4W (3PDT); 1.95VA, 1.5W (4PDT) Minimum permissible load (@1800 ops./hr.) 100mA @ 1VDC100µA @ 1VDC for MY4H 100µA @ 100mVDC for MY4ZH (Bifurcated contacts) 2 pole: 1mA @ 5VDC 4 pole: 1mA @ 5VDC 10µA @ 1 VDC (bifurcated contacts) 100mA @ 5VDC 10mA @ 5VDC (bifurcated contacts) Accessories Sockets & clips for track mount sockets with screw terminals, & back connecting sockets with solder & PCB terminals PYF14A-E Socket PYC-A1 Clip Sockets & clips for track mount sockets with screw terminals, & back connecting sockets with solder & PCB terminals. Note: PYF-S series screwless clamp terminal socket available Mounting rails= PFP Sockets & clips for track mount sockets with screw terminals, & back connecting sockets with solder & PCB terminals General Attributes Switching 10 A max.3A 10A (2 pole);

5 A (4 pole)

Features • Octal base plug-in

Exceptional reliability
Push-to-test button standard
CENELEC conformity
Full hermetic seal for hazardous applications
UL Class1, Division II approved
Signal level switching option using bifurcated contacts
Exceptional reliability
Push-to-test button standard
Arc barrier built into 4 pole
Built in diode (DC) or C/R Circuit
Name plate and mechanical indicator, standard
Compact power relay
LED, Push-to-test button, bifurcated contacts and other features available
Space efficient power switching
Extended life to 500,000/200,000 operations Contact type(s) Single buttonSingle button, bifurcated button Single button, bifurcated button Single button, bifurcated 2,500VAC (coil-contact) 1,000VAC (open contacts) 1,000VAC (coil-contact) 1,000VAC (contacts pole pole) 700VAC (open contacts) 2,000VAC (coil-contact) 1,000VAC (open contacts) 2,000VAC (coil-contact) 1,000VAC (open contacts) Dielectric strength (50/60 Hz for 1 minute) Coil Information Coil voltage 12, 24, 110/120, 220/240VAC; 12, 24, 48, 100VDC 24, 110/120VAC 12, 24VDC 220/240 VAC; 6,12, 24, 48, 100/110VDC 12, 24, 110/120, 220/240VAC, 12, 24, 48, 100VDC Operating temperature -10°C to +40°C-25°C to +60°C -55°C to +70°C -25°C to +70°C Characteristics Impulse withstand voltage (1.2 x 50µ sec. unless noted) —— — — Max. switching capacity (resistive load) 2,500VA, 280W330VA, 72W 2,500VA, 300W 1,250VA, 150W (4-pole) 1,700VA, 360W (1 pole) 1,100VA, 240W (2, 3, 4 pole) 550VA, 120W (bifurcated) Protection level UnsealedHermetic seal Unsealed Unsealed, semi-sealed ECbodyREADERS.indd 15 ECbodyREADERS.indd 15 7/14/06 11:22:57 PM7/14/06 11:22:57 PM

16 Relays - General Purpose

G2R-S (S) G7LG7J Dimensions mm (in) Minimum permissible load (@1800 ops./hr.) (@ 1800 ops./hr.) (resistive load) Impulse withstand voltage (1.2 x 50µ sec. unless noted) Insulation class Contact type(s) Contact material(s) Coil Information Coil voltage Power consumption Terminal choices Accessories Approved standards Contact Information Contact form UL, CSA, TUV, CE, IEC Quick-connect, screw, PCB 64 H x 53.5 L x 34.5 W (2.52 x 2.11 x 1.36) -25ºC to +60°C

4 Form A, 3 Form A/1 Form B,

2 Form A/2 Form B

10kV (coil-contacts) Class A, Class B (available)

Variety of contact forms
Ideal for 3 phase motor control
4 pole mini contactor
DIN rail mountable
Minimal chattering
UL94V-0 100mA @ 24VDC 6, 12, 24, 48, 100/110VDC; 200/240VAC 1.8 to 2.6VA, 2.0W 100,000 min. (at rated loads) (see data sheet for more information) R99-04V for G5D W-bracket UL, CSA Plug-in

35.5 H x 29 L x 13 W

-40 to +70°C Single button, bifurcated crossbar Ag Alloy 8kV

Nameplate and mechanical flag indicator standard
LED diode, and lockable test button option available
Socket mount 10A relay (1-pole) 100mA @ 5VDC , 10mA @ 5VDC (2 pole) 6, 12, 24, 48VDC; 24, 110 120, 230, 240VAC 0.9VA, 0.53W 100,000 min. (at rated loads) (see data sheet for more information) Sockets for track mount, sockets with screw terminals, & back connecting sockets with solder & PCB terminals. Note: P2RF-S series screwless clamp terminal socket available. SSR option: G3R. Class A UL, CSA, TUV, CE, VDE available Quick-connect, screw, PCB 49.02 H x 68.58 L x 34.54 W (1.93 x 2.70 x 1.36) -20ºC to +85°C

1 Form A-(Double Make)

2 Form A-(Double Make)

10kV (coil-contacts)

Reliable high power relay
3 mm contact gap
Conforms to IEC 950/UL 1950
Class B insulation standard
Most cost effective solution in its class.
Ideal for pump, motor loads 100mA @ 5VDC 12, 24, 48, 100VDC; 12, 24, 100/120, 200/240VAC 1.7 to 2.5VA, 1.9W 100,000 min. (at rated loads) (see data sheet for more information) R99-07G5D E bracket; P7LF-D adapter; P7LF-06 front connecting socket Class B 4,000VAC (coil-contacts) 4,000VAC (different polarity) 2,000VAC (open contacts) 1 pole: 5,000VAC (coil-contacts) 1,000VAC (open contacts) 2 pole: 5,000VAC (coil-contacts) 3,000VAC (different polarity) 1,000VAC (open contacts) 4,000VAC (coil-contacts) 2,000VAC (different polarity) 2,000VAC (open contacts) Protection level Unsealed Semi-sealed Unsealed Unsealed Semi-sealed General Attributes Switching 25A max.1 pole: 10A max. 2 pole: 5A max. 30A max. Dielectric strength (50/60 Hz for 1 minute) Characteristics Maximum switching capacity 5,500VA, 750W (NO contacts) 1,760VA, 240W (NC contacts) 2,500VA, 300W (1-pole resistive load) 4,400VA G2RV Relay: Quick-connect Socket: screw terminals, push-in wire connections (sold separately) 91.0 H x 94.0 L x 6.1 W Relay & terminal block -40ºC to +60ºC
Slimmest control relay available
Capable of switching both electrical control loads (6A) and signal level loads (1mA)
Relay available separately
Sealed for unprotected environments 5mA @ 5VDC 12, 24, 48VDC 24, 48, 110, 230VAC 300mW 6,000: 6A @ 30 VDC /250VAC Socket: G2RV-SL (UL 508) SSR Option: G3MB / G3MC Class A 4,000VAC (coil-contacts) 1,000VAC (open contacts) Semi-sealed 6A max. 1,500VA, 18W (resistive load) NEW! UL, CSA, VDE, IEC, LR, CE ECbodyREADERS.indd 16 ECbodyREADERS.indd 16 7/14/06 11:23:10 PM7/14/06 11:23:10 PM

Dimensions mm (in) Minimum permissible load (@1800 ops./hr.) (@ 1800 ops./hr.) (resistive load) Impulse withstand voltage (1.2 x 50µ sec. unless noted) Insulation class Contact type(s) Contact material(s) Coil Information Coil voltage Power consumption Terminal choices Accessories Approved standards Contact Information Contact form UL, CSA Quick-connect plug-in 48.38 H x 35.56 L x 38.73 W (1.91 x 1.40 x 1.53) -45ºC to +60°C (1 & 2 pole AC coil), + 70°C (DC coil) -45ºC to +45°C (3 pole AC coil) -45ºC to +70°C (3 pole DC coil)

1 Form C, 2 Form C, 3 Form C (monostable);

1 Form C, 2 Form C (latching/unlatching)

3/16” diameter AgCdO2 N/A Class A

Rugged power driver offers superior 3/16” through-air & 3/8” over-surface spacing
Interlocked frame & contact block prevent contact misalignment during plug-in
Indicator lamp, push-to-operate options
10A-30A in same package
Continous duty at 125% coil voltage N/A 6, 12, 24, 120VAC 5, 6, 12, 24, 48, 110VDC AC 1.7VA (1, 2PDT) 2.0VA (3PDT DC 1.2W 100,000 min. 10A @ 28VDC/240VAC 20A @ 28VDC/277VAC 30A @ 28VDC PTF11PC Socket; PTF11QDC Socket; PTF21PC Socket; PTFPCB Socket; PYMJN-PCB Retaining Clips; PYMJN-S Retaining Clips UL, CSA, TUV, VDE Screw

84 H x 62 L x 45 W

(3.31 x 2.44 x 1.77) -25ºC to +60ºC 4A, 3A/1B, 2A/2B Bifurcated Crossbar AgSnIn 10kV (coil to contacts or different polarity) 4.5kV (open contacts)

Each pole able to switch and carry 40A in parallel
Capable of switching up to 160A
Reduced power consumption & size
Low noise
Safety function included as standard
Optional auxiliary contact block enables concurrent signal (1mA) switching 2A @ 24VDC <1mA @ 5VDC (auxiliary contact block) 12, 24VDC 3.7W 100,000: 5A @ 110VDC (at 1,2000 ops/hr) 80,000: 40A @ 440VAC Auxiliary Contact Block (2 poles of 4 poles) Signal level switching capability (2 poles of 4 poles) Class B 750VAC, rms 60Hz across open contacts; 2,500VAC, rms 60Hz all other mutually insulated elements 4,000VAC (coil-contacts) 4,000VAC (different polarity) 2,000VAC (open contacts) Protection level Semi-sealedUnsealed, fully sealed General Attributes Switching 10A, 20A, 30A (UL ratings) (see: Electrical service life) 40A max. (160A max. in parallel) Dielectric strength (50/60 Hz for 1 minute) Characteristics Max. Switching Capacity (resistive load) N/A17,600VA, 550W 440VA, 110W (auxiliary contact block) UL Screw Short Base: 55.88 H x 63.50 L x 63.50 W (2.20 x 2.50 x 2.50) Long Base: 60.45 H x 84.33 L x 63.50 W (2.38 x 3.32 x 2.50) At 30Amps: -45ºC to +80°C (AC coil) -45ºC to +115°C (DC coil)

1 Form A, 1Form B, 1Form C, 2 Form A,

2 Form C (long base)

5/16” diameter AgCdO2 N/A

30 Amp heavy duty power relay
Class F coil insulation system for 155°C (total temperature)
Coil molded in DuPont Rynite® for environmental protection
Rugged construc tion rivets terminals to base
Magnetic blow-out option N/A 6, 12, 24, 120, 240, 480VAC; 6, 12, 24, 48, 110VDC 9.5VA nominal; 2W nominal 100,000 min. 30A @ 28VDC/240VAC Aluminum dust cover - sealed knock-out holes for standard conduit fittings. Relay mounts on pre-drilled base. Snap action cover release 127 W x 76.20 H x 101.60 D (5 x 3 x 4) Class F 2,200Vrms, 60Hz between contacts; 2,200Vrms, 60Hz between other elements None 30A max. N/A NEW! ECbodyREADERS.indd 17 ECbodyREADERS.indd 17 7/14/06 11:23:25 PM7/14/06 11:23:25 PM

18 Relays - Solid State

Dimensions mm (in) 13.5 H x 24.5 L x 4.5 W (0.53 x 0.96 x 0.18) 20.5 H x 24.5 L x 5.5 W (0.81 x 0.96 x 0.22) Input & Output modules:

28 H x 29 L x 13 W

(1.10 x 1.14 x 0.51) 12.5 max. H x 18.5 L x 6.5 W (0.49 x 0.73 x 0.26) max. Approvals UL, CSA, VDEUL, CSA, TUV UL, CSA, TUV UL, CSA Isolation PhototriacPhototriac Photocoupler, Phototriac Phototriac Life (MTTF) 100,000 hours100,000 hours 100,000 hours 100,000 hours Features •Reduced height thin profile SIP

Ideal for close PCB mounting
Monoblock construction results in ultimate reliability
Industry standard footprint
Space saving SIP design
Industry standard footprint
Monoblock construction results in ultimate reliability
4 kV insulation
Operation indicator standard
Interchangeable with G2R electromechanical relay
Ideal for DIN rail mount I/O operations
AC/DC & AC half-wave switching with one model
10µA max. leakage current
Matches G6D form factor Snubber circuit YesOptional Input module: No; Output module Yes (Built-in Varistor) Zero crossing YesOptional Input module: No; Output module: Yes No Dielectric strength (50/60Hz for 1 min.) 2,500VAC2,500VAC 4,000VAC 2,500VAC Socket N/AN/A P2RF-05E P6D-04P Optional heat sink N/AN/A N/A N/A Equivalent Omron EMR footprint G2RV similar for terminal blockG2RV similar for terminal block G2R G3MB G3R I/O G3DZG3MCGeneral Attributes Switching current (resistive) 2A @ 240VAC 2A @ 240VAC Input module: 100mA; Output module: 2A 0.6A @ 240VAC PCB PCB Plug-in PCB Terminal Mounting PCBPCB Socket PCB or Socket G6D, G6DS Output voltage 75-264VAC75-264VAC Input module: 4-32VDC; Output module: 75-264VAC, 4-200VDC 5, 12, 24VDC Operating input 5, 12, 24VDC5, 12, 24VDC Input module: 5VDC; 6.6-32VDC; 60-264VAC; Output module: 4-32VDC 5, 12, 24VDC Operating temperature -30ºC to +80°C-30ºC to +80°C -30ºC to +80°C -30ºC to +85°C SIP SIP DIP DIP Leakage Current (max.) 1.5mA (at 200VAC) 1.5mA (at 200VAC) Input Module: 5µA Output Module: 1.5mA (AC) 1mA (DC) 10µA (at 125VDC) ECbodyREADERS.indd 18 ECbodyREADERS.indd 18 7/14/06 11:23:32 PM7/14/06 11:23:32 PM

Phototriac (G3S) Photocoupler (G3SD) No Yes (Built-in Varistor) Phototriac Optional Yes Dimensions mm (in) 26H x 33H x 14 W (1.04 x 1.30 x .55) max.

16.5 H x 20 L x 10 W

(0.65 x 0.79 x 0.39)

20 H x 40 L x 9 W

(0.79 x 1.58 x 0.35) Input module: 20.5 H x 43.5 L x 10 W (0.81 x 1.70 x 0.39) Output module: 30.5 H x 43.5 L x 10 W (1.20 x 1.70 x 0.39) Photocoupler Input module: No; Output module: Yes Input module: No; Output module: Yes Approvals UL (114), CSA (22.2)UL, CSA UL, CSA, TUV UL, CSA Life (MTTF) 100,000 hours100,000 hours 100,000 hours 100,000 hours Features • Flat & vertical packages

Ideal for FA & OA equipment
AC and DC models available
Socketable
Heatsink, available
Interchanges with G6B SPST electrical mechanical relay
Multi-input SSR
Space-saving SIP design
Ideal for high density Power PCB applications
High current switching capability
Color-coded input & output modules
Industry standard footprint
4kV dielectric strength
LED indicator Dielectric strength (50/60Hz for 1 min.) 2,500VAC2,500VAC 2,000VAC (2A versions) 2,500VAC (3A and 5A versions) 4,000VAC Socket N/AP6B-04P (PCB) N/A N/A Optional heat sink N/AY92B-S08N N/A N/A General Attributes Switching current (resistive) (max.) 2A, 3A, @ 53VDC, 26VAC1A @ 240VAC (1.2A, G3S-PD & heatsink) (1.1A, G3SD-PD & heatsink) 2, 3A, 5A @ 250VAC Input module: 25mA @ 4 to 32VDC Output module: 3mA max. @ 5 to 48VDC 3mA max. @ 100 to 240 VAC 1.5 max. @ 48 to 200 VDC PCBPCB PCB PCBTerminal Mounting PCBPCB or Socket PCB PCB Equivalent Omron EMR footprint N/AG6B N/A N/A Output voltage 75~264VAC 3~53VDC 5, 12. 24VDC 75-264VAC Input module: 4-32VDC; Output module: 75-264VAC, 4-200VDC Operating input 5, 12, 24; 3~28VDC5, 12, 24VDC 5, 12, 24VDC Input module: 80-264VAC, 3-32VDC; Output module: 3-32VDC Operating temperature -30°C to +80°C-30°C to +80°C -30°C to +80°C -30°C to +85°C SIP SIP SIP SIP Leakage Current (max.) 2mA (G3S) 0.1mA @ 26VDC (G3S) 2.5/5mA 2mA @ 100VAC/5mA @ 200VAC (2Amp versions) 1.5mA @ 200VAC (3 & 5 Amp versions) Input module: 100µA max. Output module: 5mA @ 200VAC (AC) 1mA max. (DC) ECbodyREADERS.indd 19 ECbodyREADERS.indd 19 7/14/06 11:23:38 PM7/14/06 11:23:38 PM

20 Relays - Solid State

Dimensions mm (in) 11.5 H x 47 L x 37.5 W (0.45 x 1.90 x 1.50)

High capacity
Panel Mount
Quick-connect terminals 31.8 H x 43.2 L x 15.2 W (1.25 x 1.7 x 0.6)
Color-coded modules
Industry standard footprint
Built-in anchor screw
Optical isolation – Dielectric 4kV
Zero cross on AC output modules

27 H x 58 L x 43 W

(1.06 x 2.28 x 1.69)

Ideal for industrial controls & commercial cooking
"Hockey Puck" standard
Operation indicator standard General Attributes Switching current (resistive) (max.) 20A max.@ 240VAC (264VAC max.) Input Module: 12mA, 15mA, or 18mA (depending on model) Output Module: 3A (1A on DC output models rated< 200VDC) Versions range from 10A to 90A max. (when using heat sink) Output voltage 75-264VACInput Module: 4.5-6VDC, 12-18VDC, 20-30VDC Output Module: 75-140 VAC, 75-280VAC, 5-60 VDC, 5-200VDC 19 - 264VAC 180 - 528VAC 4 - 220VDC (10A model) 400 - 600VAC (10, 25, 50A models) Operating input 5, 12, 24VDCInput Module: 90-140VDC/AC, 180-280 VDC/AC, 10-32VDC/AC Output Module: 5, 15, 24VDC 4-32VDC; 75-264VAC Operating temperature -30ºC to +80°C-30ºC to +80°C -30ºC to +80°C SIP Quick Connect Quick Connect G3PA/B Consult Omron
Built-in heat sink increases life and reliability
Voltage turn-on at zero cross- ing reduces initial inrush load currents
LED indicator when control power applied Isolation Life (MTTF) Mounting Snubber circuit Dielectric strength (50/60Hz for 1 min.) Zero crossing Approvals Socket Mounting plate UL, CSA, TUV 100,000 hours Plug-in Yes (built in varistor) 2,000VAC Phototriac Optional N/A UL, CSA, TUV, CE 100,000 hours PCB with anchor screw 4,000VAC AC Input, DC Input, DC Output: Photocoupler AC Output: Phototriac Yes (AC output modules only) Yes (AC output modules only) Mounting plate UL, CSA, TUV 100,000 hours Panel 2,500VAC 4000VAC (75 and 90A models) Phototriac, Photocoupler Yes Yes Quick connectPCB Screw Optional heat sink Y92B-N50, -N100N/A Y92B-A , -B , -P Equivalent Omron EMR footprint N/AN/A N/A Terminal PFP-xxx UL, CSA, TUV, VDE 100,000 hours Panel, DIN G3PA: 4,000VAC G3PB: 2,500VAC Phototriac Yes Yes Screw N/A N/A up to 45A 75 - 264VAC 180 - 528VAC 12-24VDC -30ºC to +80°C Leakage Current (max.) Input Module: 100µA AC Output Modules: 5mA @ 240VAC 2.5mA @ 120VAC DC Output Modules: 1mA 2mA (at 100VAC) 5mA (at 200VAC) 5mA @ 100VAC 10mA @ 200VAC 20mA @ 400VAC 10mA @ 200VAC 20mA @ 400VAC ECbodyREADERS.indd 20 ECbodyREADERS.indd 20 7/14/06 11:23:44 PM7/14/06 11:23:44 PM

Solder terminals PCB terminals Mounting Track Length PFP-100N PFP-50N 1 meter .5 meter Relay Type Mounting Bracket Adaptor Track Mount/Panel Mount Front Connecting Socket Track Mount/Panel Mount G7J-(ALL) G7L-1A-T G7L-1A-TJ G7L-1A-B G7L-1A-BJ G7L-2A-T G7L-2A-TJ G7L-2A-B G7L-2A-BJ R99-04-FOR-G5F W bracket R99-07G5D E bracket P7LF-D P7LF-06 P7LF-06 P7LF-06 P7LF-06 Terminal Cover Socket Bridge P&LE-C PYDM G2R-1-S G2R-2-S G2RV G6B G6D G6BK G6BU G6C-1, G6C-2 G6CK G6CU LY1, LY2 LY3 LY4 MK2 MK3 MY2 MY3 MY4 MY2K MY4(Z)H P2RF-05 P2RF-05-E P2RF-05-S P2RF-08 P2RF-08-E P2RF-08-S G2RL-SL500, -SL700 PTF08A-E PTF11A PTF14A-E PFO83A-E PF113A-E PYF08A-E PYF08A-N PYF08-S PYF11A PYF14A-E PYF14A-N PYF14S PYF14A-E PYF14A-E P2R-05A P2R-08A PT08 PT11 PT14 PL08 PL11 PY08 PY11 PY14 PY14 P2R-05P P2R-08P P6B-04P (1-pole), P6B-26P (2-pole) P6D-04P P6B-06P P6B-04P P6C-06P P6C-08P P6C-06P PT08-0 PT11-0 PT14-0 PLE08-0 PLE11-0 PY08-02 PY11-02 PY14-02 PY14-02 NOTES: 1. -E and -N models are finger-protect construction. Round terminals cannot be used. Use Y-shaped terminals. 2. -S types are screwless terminal styles. ECbodyREADERS.indd 21 ECbodyREADERS.indd 21 7/14/06 11:24:03 PM7/14/06 11:24:03 PM