G3B25AP-XA

G3B15AP-XA NKK | Alldatasheet

Document overview

• Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
• PDF pages: 6

Technical content

NKK Switches • email: sales@nkkswitches.com • Phone (480) 991-0942 • Fax (480) 998-1435 • www.nkkswitches.com 03-07 Ultra-Miniature Process Sealed SMT Pushbuttons Series G3B Distinctive Characteristics Ultra-miniature size allows high density mounting, and extremely light weight of 0.6 gram makes these switches ideal for handheld equipment. Tape-reel and stick-tube packaging allow rapid automated placement of surface mount devices. Tape-reel packaging meets EIA-481-2 Standard. Heat resistant resin used for housing, base, and plunger allows vapor phase and infrared convection reflow soldering. Combination of design features achieves total seal and allows automated processing techniques, including flux cleaning procedures: one-piece bushing and housing, rubber seals surrounding actuator and base, epoxy at joint of case and base, and molded-in, epoxy-sealed terminals. Award-winning STC contact mechanism with benefits unavailable in conventional mechanisms: smoother, positive detent actuation, increased contact stability and unparalleled logic-level reliability. (Additional STC details in Terms & Acronyms; see Supplement section.) Gull-wing terminals provide mechanical stability during soldering and simplified solder joint inspection. Coplanarity: all considered surfaces must lie between two parallel planes that are a maximum distance apart of .0059” (0.15mm). (Additional coplanarity details in Terms and Acronyms in the Supplement section.) Actual Size

NKK Switches • email: sales@nkkswitches.com • Phone (480) 991-0942 • Fax (480) 998-1435 • www.nkkswitches.com 03-07 Ultra-Miniature Process Sealed SMT Pushbuttons Series G3B General Specifications Electrical Capacity (Resistive Load) Logic Level: 0.4VA maximum @ 28V AC/DC maximum (Applicable Range 0.1mA ~ 0.1A @ 20mV ~ 28V) Note: Find additional explanation of operating range in Supplement section. Other Ratings Contact Resistance: 80 milliohms maximum Insulation Resistance: 500 megohms minimum @ 500V DC Dielectric Strength: 500V AC minimum for 1 minute minimum Mechanical Life: 50,000 operations minimum Electrical Life: 50,000 operations minimum Nominal Operating Force: 2.0N Materials & Finishes Actuator: Polyphenylene sulfide Case: Polyphenylene sulfide Sealing Rings: Nitrile butadiene rubber Movable Contacts: Phosphor bronze with gold plating Stationary Contacts: Phosphor bronze with gold plating Base: Polyphenylene sulfide Terminals: Phosphor bronze with gold plating Environmental Data Operating Temperature Range: –30°C through +85°C (–22°F through +185°F) Humidity: 90 ~ 95% humidity for 96 hours @ 40°C (104°F) Vibration: 10 ~ 500Hz with peak-to-peak amplitude of 1.5mm traversing the frequency range & returning in 1 minute; 3 right angled directions for 2 hours Shock: 50G (490m/s2) acceleration (tested in 6 right angled directions, with 5 shocks in each direction) Installation Mounting: It is recommended that the body of models for upright mounting without bracket be fastened to a panel or similar support for protection of solder joints from mechanical stress. Coplanarity: See specifications in Terms & Acronyms in Supplement section. Processing Soldering: Reflow Soldering Recommended. See Profile B in Supplement section. Manual Soldering: See Profile B in Supplement section. Cleaning: Automated cleaning. See Cleaning specifications in Supplement section. Standards & Certifications UL Recognition The G3B Series pushbuttons have not been tested for UL recognition or CSA certification. or CSA Certification: These switches are designed for use in a low-voltage, low-current, logic-level circuit. When used as intended in a logic-level circuit, the results do not produce hazardous energy.

NKK Switches • email: sales@nkkswitches.com • Phone (480) 991-0942 • Fax (480) 998-1435 • www.nkkswitches.com 03-07 Ultra-Miniature Process Sealed SMT Pushbuttons Series G3B POLES

1 SPDT

2 DPDT

TYPICAL SWITCH ORDERING EXAMPLE COLORS A Black B White C Red CIRCUITS

5 ON (ON)

( ) = Momentary PLUNGER A .130” (3.3mm) Long 1G3B A5 B TERMINALS P Gull Wing for Upright Mount B Gull Wing for Upright with Bracket H Gull Wing for Right Angle PACKAGING No Code Partitioned Tray for Upright & Right Angle - Any Quantity R Tape-Reel for Right Angle Only

500 Pieces/Reel

S Stick-Tube for Upright Mount

50 Pieces/Stick

Packaging details at end of G3B Series SPDT ON-(ON) Circuit Gull Wing Terminals for Upright with Bracket Mount Packaged in Partitioned Tray DESCRIPTION FOR TYPICAL ORDERING EXAMPLE G3B15AB .130” (3.3mm) Long Plunger Plunger Position ( ) = Momentary Connected Terminals Throw & Schematics Pole Model Normal Down Normal Down Note: Terminal numbers are not actually on the switch. SP G3B15 ON (ON) 5-6 5-4 SPDT DP G3B25 ON (ON) 5-6 2-3 5-4 2-1 DPDT POLES & CIRCUITS (COM) 5 (COM) OPTIONAL CAPS X Slip-on Cap .157” (4.0mm) Diameter (For installation after processing only) Y Process Compatible Cap .157” (4.0mm) Diameter (Combines with R or S packaging only)

NKK Switches • email: sales@nkkswitches.com • Phone (480) 991-0942 • Fax (480) 998-1435 • www.nkkswitches.com 03-07 Ultra-Miniature Process Sealed SMT Pushbuttons Series G3B (0.6) Typ .024 Slot (5.0) .197 (9.0) .354 (0.1) .004 (0.7) .028 (0.25) Typ .010 (1.5) .059 (2.0) Dia .079 (4.0) Dia .157 (3.3) .130 (5.08) .200 Support Legs

5 COM

(8.5) .335 (0.5) Typ .020 (7.6) .299 (8.5) .335 (0.5) Typ .020 (7.6) .299 (0.6) Typ .024 Slot (5.0) .197 (9.0) .354 (0.1) .004 (0.7) .028 (0.25) Typ .010 (1.5) .059 (2.0) Dia .079 (4.0) Dia .157 (3.3) .130 (5.08) .200 Support Legs (3.8) .150 (1.2) Typ .047 (11.0) .433 (0.5) Typ .020 (0.9) Typ .035 (7.6) .299 (3.8) .150 (1.2) Typ .047 5COM (11.0) .433 (0.5) Typ .020 (0.9) Typ .035 (7.6) .299 (5.55) .219 6 5 4 (0.1) .004 COM(0.25) .010 (1.5) .059 (3.8) Typ .150 (2.54) Typ .100 (1.25) Typ .049 (0.5) Typ .020 (0.9) Typ .035 (11.0) .433 (0.55) .022 (9.0) .354 (3.3) .130 (2.0) Dia .079 (4.0) Dia .157 Slot (8.5) .335 (0.25) Typ .010 6 5 4 (5.55) .219 (0.1) .004COM 3 2 1 Single Pole Double Pole TYPICAL SWITCH DIMENSIONS Right Angle Mounting Upright Mounting with Bracket Single & Double Pole G3B25AP G3B15AB Upright Mounting Single & Double Pole G3B15AH Cap Colors Available: Black White RedA B C PLUNGER & OPTIONAL CAPS .130” (3.3mm) Long PlungerA (3.8) .150 (4.0) Dia .157 (2.4) .094 (2.0) Dia .079 (3.3) .130 Process Compatible Cap .157” (4.0mm) DiameterY Factory assembled. Available with tape-reel or stick-tube packaging only. Material: Polyamide Finish: Glossy Actual Size AT4063 Slip-on Cap .157” (4.0mm) DiameterX Available with bulk pack - aging only. Cap must be installed after processing. Material: Polyamide Finish: Glossy

NKK Switches • email: sales@nkkswitches.com • Phone (480) 991-0942 • Fax (480) 998-1435 • www.nkkswitches.com 03-07 Ultra-Miniature Process Sealed SMT Pushbuttons Series G3B PACKAGING Pad Layouts for Upright Mounting Upright Mounting with Bracket Right Angle Mounting Surface Mount Terminals Single Pole Double Throw Double Pole Double Throw (1.7) Typ .067 (0.635) .025 (0.7) Typ .028 (2.54) Typ .100 (6.0) .236 Support Pads (5.08) .200 (1.7) Typ .067 (0.635) Typ .025 (0.7) Typ .028 (2.54) Typ .100 (6.0) .236 (1.7) Typ .067 (3.8) .150 (1.1) Typ .043 (1.55) Typ .061 (0.635) Typ .025 (0.7) Typ .028 (2.54) Typ .100 (9.75) .384 (6.0) .236 (1.7) Typ .067 (3.8) .150 (1.1) Typ .043 (1.55) Typ .061 (0.635) .025 (0.7) Typ .028 (2.54) Typ .100 Support Pads (9.75) .384 (5.08) .200 (6.0) .236 (1.1) Typ .043 (3.8) .150 (1.7) Typ .067 (1.27) Typ .050 (0.635) Typ .025 (0.7) Typ .028(1.55) Typ .061 (3.0) .118 (9.75) .384 (1.1) Typ .043 (3.8) .150 (1.7) Typ .067 (2.54) Typ .100 (0.635) .025 (0.7) Typ .028(1.55) Typ .061 (3.0) .118 (9.75) .384 Partitioned Tray for Upright & Right Angle Any quantity If the G3 upright models are ordered in less than 50-piece increments or the right angle models in less than 500-piece increments, the switches are packaged in a partitioned tray. No code is required. No Code R Tape-Reel for Right Angle 500 pieces per reel Switches must be ordered in 500-piece increments when tape-reel packaging is selected. This packaging meets EIA-481-2 Standard for “16mm and 24mm Embossed Carrier Taping of Surface Mount Components for Automatic Handling.”

NKK Switches • email: sales@nkkswitches.com • Phone (480) 991-0942 • Fax (480) 998-1435 • www.nkkswitches.com 03-07 Ultra-Miniature Process Sealed SMT Pushbuttons Series G3B PACKAGING (CONTINUED) Tape-Reel Packaging for Right Angle Mount Each tape-reel of 550 pockets contains 500 switches. Minimum Leader Length: 7.87” (200mm) Minimum Trailer Length: 1.97” (50mm) Reel Dimensions Tape Dimensions Terminal #1 Part No. Direction of Feed (2.1) Dia Typ .083 (1.5) Dia Typ .059 (4.0) Typ .157 (16.0) Typ .630 (2.0) Typ .079 (1.75) .069 (11.5) .453 (24.0) .945 (78.49) Dia 3.090 (2.0) .079 (24.4) .961 (13.0) Dia .512 (2.0) Typ .079 (21.0) Dia .827 Overall Dia (330.0) 13.0 (6.0) .236 (0.4) .016 (17.8) .701 (8.6) .339 (13.9) .547 (1.5) R .059 (2.0) .079 Stick-Tube Packaging for Upright Mount Each stick-tube contains 50 switches. L = Length G3B Upright (code P) 18.31” (465mm) G3B Upright with Bracket (code B) .386 (15.3) .602 (7.7) .303 L Stick-Tube Dimensions S Stick-Tube for Upright Mount 50 pieces per stick Switches must be ordered in 50-piece increments when stick-tube packaging is selected.