G2SBA480-E GULFSEMI | Alldatasheet
Document overview
- Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
- PDF pages: 2
Technical content
Rev.A1 www.gulfsemi.com G2SBA480-E SINGLE PHASE GLASS PASSIVATED BRIDGE RECTIFIER Voltage: 800V Current:4.0A Features GBL Plastic package has Underwriters Laboratory Flammability Classification 94V-0 Glass passivated chip junction High case dielectric strength Typical I R less than 0.1 μA High surge current capability Ideal for printed circuit board High temperature soldering guaranteed: 260 ℃ /10 seconds, 0.375”(9.5mm) lead length, 5lbs.(2.3kg) tension Mechanical Data Terminal: Plated leads solderable per MIL-STD 750, Method 2026 Case: Molded plastic body over passivated junctions Polarity: Polarity symbol marked on body Mounting position: any Dimensions in millimeters MAXIMUM RATINGS AND ELECTRICAL CHARACTERISTICS (single-phase, half -wave, 60HZ, resistive or inductive load rating at 25 °C, unless otherwise stated, for capacitive load, derate current by 20%) Symbol G2SBA480-E units Maximum repetitive peak reverse voltage Vrrm 800 V Maximum RMS voltage Vrms 560 V Maximum DC blocking voltage Vdc 800 V Maximum average forward Tc = 50 ℃(Note1) rectified output current Ta = 40 ℃(Note2) If(av) 4.0 3.0 A Peak forward surge current single sine-wave superimposed on rated load (JEDEC Method) Ifsm 120 A Maximum instantaneous forward voltage drop per leg at 2.0A Vf 1.0 V Rating for fusing (t < 8.3ms) I2t 60 A2Sec Maximum DC reverse current at Ta = 25° C rated DC blocking voltage per leg Ta = 125° C Ir 5.0 500 µA Maximum thermal resistance per leg Rth(ja) Rth(jc) 47.0 10.0 ℃/W Operating junction and storage temperature range Tj, Tstg -55 to +150 ℃ Note: 3. Recommended mounting position is to bolt down on heatsinkwith silicone thermal compound for maximum heat transfer with #6 screw
Rev.A1 www.gulfsemi.com RATINGS AND CHARACTERISTIC CURVES G2SBA480-E