DATASHEET SEARCH SITE | WWW.ALLDATASHEET.COM
Document overview
- Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
- PDF pages: 2
Technical content
Features
2.5V to 5.5V Input Supply Range Active-High Enable Control 1.2MHz Current-Mode Boost Regulator Fast Transient Response to Pulse Load ±1% Accurate Output Voltage Built-In 20V/1.8A, 0.7Ω N-Channel MOSFET High Efficiency up to 90% Over-Current Protection Output Under-Voltage Protection High-Performance Operational Amplifier ±150mA Output Short-Circuit Current 12V/μs Slew Rate 12MHz, -3dB Bandwidth Rail-to-Rail Input and Output 600kHz Negative Charge Pump Driver for V GL 600kHz Positive Charge Pump Driver for V GH White LED Driver 1MHz Switching Frequency 20V/1.2A, 0.3Ω N-channel MOSFET Input Under Voltage Protection Over Current Protection Over Voltage Protection Digital Dimming Control Power-On Sequence Control Thermal-Overload Protection RoHs Compliant TQFN4X4-24 Package
Applications
Notebook Computer Displays UMPCs Medium Size LCD Panel General Description The G2500 includes a high-performance boost regu- lator, a V COM buffer (unity gain OPA), a V GH charge pump driver, a VGL charge pump driver, and white LED driver for active-matrix thin-film transistor (TFT) liq- uid-crystal displays (LCDs). The boost converter provides the regulated supply voltage for the panel source driver ICs. The converter is a high switching frequency (1.2MHz) current mode regulator with an integrated 20V N-Channel 0.7 Ω MOSFET that allows the use of ultra-small inductors and ceramic capacitors. It provides fast transient re- sponse to pulsed loading while achieving efficiency over 90%. The device can produce output voltage as high as 18V from an input as low as 2.8V. The V COM buffer can drive the LCD V COM voltage that features high short-circuit current (150mA), fast slew rate (12V/μs), wide bandwidth (12MHz) and rail-to-rail input/output. A positive and a negative charge-pump driver provide adjustable regulated output voltages V GH and V GL to bias the TFT. Both charge-pump drivers operate with 600kHz switching frequency. The LED driver automatically regulated supply voltage for the LED light bars without the need to calculate the output for different LED types. It also integrates a 20V n-channel MOSFET that provides high output power. The low reference voltage minimized the power loss across the current-setting resistor. An enable input can be pulsed repeatedly to adjust LED’s brightness. The boost converter of the LED driver incorporates over current protection and over voltage protection to en- sure safety operation. The G2500 includes internal power-up sequencing, over/under voltage protections of the boost converter, and over temperature protection to ensure in safe op- erating. The G2500 is available in a 24-pin 4X4 TQFN package.
Ordering Information
NUMBER MARKING TEMP. RANGE PACKAGE (Green) G2500R51U 2500 -40 °C to 85°C TQFN4X4-24 Note: R5: TQFN4X4-24 1: Bonding Code U: Tape & Reel
Ver: 0.1 Aug 14, 2013 TEL: 886-3-5788833 http://www.gmt.com.tw G2500Global Mixed-mode Technology P i n C o n f i g u r a t i o n DRVP FB FBP NC FBN AGNDB FBB AGND VREF DRVN Thermal PAD 7 8 10 11 2021222324 COMP VCC PGND NC AVDD OPAO OPAI 13 EN LX LXB PGNDB VCCB OVP ENB G2500 TQFN4X4-24 Note: Recommend connecting the Thermal Pad to the Ground for excellent power dissipation