DATASHEET SEARCH SITE | WWW.ALLDATASHEET.COM

Document overview

  • Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
  • PDF pages: 1

Technical content

Features

„ Built in 3 full-swing/constant voltage drivers switched by serial control with brake function. „ Built in 1 constant current drivers for shutter or IRIS. „ Low on-resistance (1.2Ω, sum of on-resistance of upside and bottom side). „ Output current：Iout<=0.8A(max.) for each channel. „ Build-in thermal shutdown (TSD, 150 °C). „ CH1/2 corresponds to STM control of 2-2 phase or 1-2 phase. „ Built in exclusive control mode: CH13/23 Æ the combination control mode of 5CH is set. „ Built in exclusive control mode: CH3/4(for DCM) Æ the combination control mode of 6CH is set. „ Power save mode corresponds by serial control setup. „ PI (photo interrupter drive) 3 channel built-in. „ Small 20TQFN (3 ×3mm) is adopted.

Applications

„ Stepping motor driver/ DC motor driver for DSC General Description G2009 is a 4+2-channel H-Bridge motor drivers IC for the digital camera and so on. It has three full-swing/constant voltage drivers and one full-swing/constant current drivers. G2009 can be operated in serial control mode or partial exterior control mode. When operating in partial exterior control mode, the mode of each CH is fixed by initial serial control setting. When operating in serial control mode, the mode of each driver can be setting by serial control.

Ordering Information

NUMBER MARKING TEMP. RANGE PACKAGE (Green) G2009RZ1U 2009 -20 °C to +85°C TQFN3X3-20 Note: RZ: TQFN3X3-20 1: Bonding Code U: Tape & Reel Pin Configurations CH1~3ÆCV/FS CH4 Æ4A:CC/CV/FS

4 B : C C / F S

Note: Recommend connecting the Thermal Pad to the Ground for excellent power dissipation. G2009 TQFN3X3-20 5 11 Thermal Pad (EP) OUT2A OUT1B OUT2B VM OUT3A OUT3B OUT4A RNF4 OUT4B PI1 PI2 PI3 VCC IN3 IN2 IN1 SDAT SCLK SLD OUT1A

21 GND

Note: Recommend connecting the Thermal Pad to the Ground for excellent power dissipation. G2009 TQFN3X3-20 5 11 Thermal Pad (EP) OUT2A OUT1B OUT2B VM OUT3A OUT3B OUT4A RNF4 OUT4B PI1 PI2 PI3 VCC IN3 IN2 IN1 SDAT SCLK SLD OUT1A