DATASHEET SEARCH SITE | WWW.ALLDATASHEET.COM

Document overview

  • Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
  • PDF pages: 1

Technical content

Features

„ Built-in 5 full-swing/constant voltage drivers switched by serial control with brake function „ Built-in 2 constant current drivers for shutter or IRIS „ Low on-resistance (1.2Ω, sum of on-resistance of up side and bottom side) „ Output current：Iout<=0.8A(max.) for each channel „ Built-in thermal shutdown (TSD, 150 °C) „ Built-in CC mode weak excitation „ CH1/2, CH3/4 and CH5/6 correspond to STM control of 2-2 phase or 1-2 phase „ All power supply systems (VCC, VM12, VM34, VM5, VM6) can be set up with an independent power supply „ Power save mode corresponds by serial control setup „ PI (photo interrupter drive) 3 channel built-in. „ Small 40TQFN (5 ×5mm) is adopted

Applications

„ Stepping motor driver/ DC motor driver for DSC General Description G2007 is a 6-channel H-Bridge motor drivers IC for the digital camera and so on. It has five full-swing/constant voltage drivers and two full-swing/constant current drivers. G2007 can be operated in serial control mode or partial exterior control mode. When operating in partial exterior control mode, the mode of each CH is fixed by initial serial control setting. When operating in serial control mode, the mode of each driver can be setting by serial control.

Ordering Information

NUMBER MARKING TEMP. RANGE PACKAGE (Green) G2007RG1U 2007 -20 °C to +85°C TQFN5X5-40 Note: RG: TQFN5X5-40 1: Bonding Code U: Tape & Reel Pin Configurations CH1~4: CV/FS CH5 : CC/CV/FS CH6 : CC/FS IN2A SLD RESET IN1A IN1B IN2B VCC IN3A IN3B PI3 PI2 OUT1A VM12 OUT2A OUT5A RNF5 OUT5B VM5 SDAT SCLK IN5A IN5B GND IN6A IN6B IN4A IN4B VM34 OUT4A OUT4B OUT6A RNF6 OUT6B VM6 PI1 G2007 TQFN5X5-40 Thermal Pad (EP)

31 OUT3A

Note: Thermal Pad must connect to the Ground for excellent power dissipation. OUT1B TOP VIEW IN2A SLD RESET IN1A IN1B IN2B VCC IN3A IN3B PI3 PI2 OUT1A VM12 OUT2A OUT5A RNF5 OUT5B VM5 SDAT SCLK IN5A IN5B GND IN6A IN6B IN4A IN4B VM34 OUT4A OUT4B OUT6A RNF6 OUT6B VM6 PI1 G2007 TQFN5X5-40 Thermal Pad (EP) Note: Thermal Pad must connect to the Ground for excellent power dissipation. OUT1B TOP VIEW