G12KP-YA NKK | Alldatasheet

Document overview

  • Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
  • PDF pages: 4

Technical content

NKK Switches • email: sales@nkkswitches.com • Phone (480) 991-0942 • Fax (480) 998-1435 • www.nkkswitches.com 03-07 Process Sealed Ultra-Miniature Rockers Series G Distinctive Characteristics Actual Size Ultra-miniature size allows high density mounting, and extremely light weight of 0.25 gram makes these switches ideal for handheld equipment. Totally sealed body construction prevents contact contamination and allows time-and money-saving automated soldering and cleaning. Award-winning STC contact mechanism with benefits unavailable in conventional mech- anisms: smoother, positive detent actuation, increased contact stability and unparalleled logic-level reliability. (Additional STC details in Terms & Acronyms; see Supplement section.) terminal spacing conforms to standard PC board grid spacing. Round terminals facilitate easier through-hole mounting on PC boards. Matching indicators available and shown at the end of Section M.

NKK Switches • email: sales@nkkswitches.com • Phone (480) 991-0942 • Fax (480) 998-1435 • www.nkkswitches.com 03-07 Process Sealed Ultra-Miniature Rockers Series G General Specifications Electrical Capacity (Resistive Load) Logic Level: 0.4VA maximum @ 28V AC/DC maximum (Applicable Range 0.1mA ~ 0.1A @ 20mV ~ 28V) Note: Find additional explanation of operating range in Supplement section. Other Ratings Contact Resistance: 80 milliohms maximum Insulation Resistance: 500 megohms minimum @ 500V DC Dielectric Strength: 500V AC minimum for 1 minute minimum Mechanical Life: 100,000 operations minimum for On-None-On & On-Off-On 50,000 operations minimum for other circuits Electrical Life: 100,000 operations minimum for On-None-On & On-Off-On 50,000 operations minimum for other circuits Nominal Operating Force: .81N for momentary & 1.06N for maintained Angle of Throw: 28° Materials & Finishes Actuator: Glass fiber reinforced polyamide Case: Glass fiber reinforced polyamide Sealing Rings: Nitrile butadiene rubber Movable Contact: Phosphor bronze with gold plating Stationary Contacts: Phosphor bronze with gold plating Base: Glass fiber reinforced polyamide Terminals: Phosphor bronze with gold plating Environmental Data Operating Temperature Range: –25°C through +85°C (–13°F through +185°F) Humidity: 90 ~ 95% humidity for 96 hours @ 40°C (104°F) Vibration: 10 ~ 55Hz with peak-to-peak amplitude of 1.5mm traversing the frequency range & returning in 1 minute; 3 right angled directions for 2 hours Shock: 50G (490m/s2) acceleration (tested in 6 right angled directions, with 5 shocks in each direction) Installation Cap Installation Force: 39.1N (8.8 lbf) maximum downward force on actuator PCB Processing Soldering: Wave Soldering Recommended: See Profile A in Supplement section. Manual Soldering: See Profile A in Supplement section. Cleaning: Automated cleaning. See Cleaning specifications in Supplement section. Standards & Certifications UL Recognition or CSA Certification: The G Series rockers have not been tested for UL recognition or CSA certification. These switches are designed for use in a low-voltage, low-current, logic-level circuit. When used as intended in a logic-level circuit, the results do not produce hazardous energy.

NKK Switches • email: sales@nkkswitches.com • Phone (480) 991-0942 • Fax (480) 998-1435 • www.nkkswitches.com 03-07 Process Sealed Ultra-Miniature Rockers Series G CAP COLORS A Black B White C Red POLES

1 SPDT

2 DPDT

TYPICAL SWITCH ORDERING EXAMPLE 2 YG CIRCUITS

2 ON NONE ON

3 ON OFF ON

5 ON NONE (ON)

8 (ON) OFF (ON)

9 ON OFF (ON)

( ) = Momentary PC TERMINALS P Straight DESCRIPTION FOR TYPICAL ORDERING EXAMPLE G22KP-YA K A ROCKER CAP Y Rocker P ACTUATOR K Snap Top Straight PC Terminals DPDT ON-NONE-ON Circuit Snap Top with Black Rocker Rocker Position ( ) = Momentary Connected Terminals Throw & Schematics Pole Model Up Center Down Up Center Down Note: Terminal numbers are not actually on the switch. SP G12 G13 G15 G18 G19 ON ON ON (ON) ON NONE OFF NONE OFF OFF ON ON (ON) (ON) (ON) 5-6 OPEN 5-4 SPDT DP G22 G23 G25 G28 G29 ON ON ON (ON) ON NONE OFF NONE OFF OFF ON ON (ON) (ON) (ON) 5-6 2-3 OPEN 5-4 2-1 DPDT POLES & CIRCUITS 5 (COM) (COM)

NKK Switches • email: sales@nkkswitches.com • Phone (480) 991-0942 • Fax (480) 998-1435 • www.nkkswitches.com 03-07 Process Sealed Ultra-Miniature Rockers Series G ACTUATOR Snap Top for RockerK (4.0) .157 (2.3) .090 28° (3.8) .150 (1.7) Dia .067 PC TERMINALS StraightP (2.54) Typ .100 (2.6) .102 (2.54) Typ .100 (0.4) Dia Typ .016 (7.0) .276 (4.5) .177 Color Codes: Material: Polyamide Finish: Matte Colors Available: A, B, C Black White RedA B C ROCKER CAP & COLORS AT4062 RockerY TYPICAL SWITCH DIMENSIONS (6.2) .244 (14.0) .551 (11.25) .443 (11.5) .453 28° (13.4) .528 (10.0) .394 Actual Size Straight PC Single & Double Pole G23KP-YA On single pole models positions 1 & 3 are support pins. (6.2) .244 28° (11.5) .452 (4.0) Dia .156 (0.4) Dia Typ .016 (2.54) Typ .100 (2.6) .102 (14.0) .551 (3.8) .150 (1.6) .063 (7.0) .276 P/N This Side (7.0) .276 (2.54) .100 (4.5) .177 (0.6) Dia Typ .024 (2.54) Typ .100 (2.54) .100 4 (0.6) Dia Typ .024 (2.54) Typ .100 (2.54) .100 1