DATASHEET SEARCH SITE | WWW.ALLDATASHEET.COM
Document overview
- Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
- PDF pages: 4
Technical content
Series G Process Sealed Ultra-Miniature Toggles www.nkk.comA34 IndicatorsAccessoriesSupplement Tactiles KeylocksRotaries PushbuttonsIlluminated PBSlides Programmable RockersTouch Tilt AToggles General Specifications Electrical Capacity (Resistive Load) Logic Level: 0.4VA maximum @ 28V AC/DC maximum (Applicable Range 0.1mA ~ 0.1A @ 20mV ~ 28V) Note: Find additional explanation of operating range in Supplement section. Other Ratings Contact Resistance: 80 milliohms maximum Insulation Resistance: 500 megohms minimum @ 500V DC Dielectric Strength: 500V AC minimum for 1 minute minimum Mechanical Life: 100,000 operations minimum for On-None-On & On-Off-On 50,000 operations minimum for other circuits Electrical Life: 100,000 operations minimum for On-None-On & On-Off-On 50,000 operations minimum for other circuits Nominal Operating Force: 0.93N for momentary & 1.20N for maintained Angle of Throw: 28° Materials & Finishes Actuator: Glass fiber reinforced polyamide Case: Glass fiber reinforced polyamide Sealing Rings: Nitrile butadiene rubber Movable Contacts: Phosphor bronze with gold plating Stationary Contacts: Phosphor bronze with gold plating Base: Glass fiber reinforced polyamide Terminals: Phosphor bronze with gold plating Support Bracket: Phosphor bronze with tin plating Environmental Data Operating Temperature Range: –25°C through +85°C (–13°F through +185°F) Humidity: 90 ~ 95% humidity for 96 hours @ 40°C (104°F) Vibration: 10 ~ 55Hz with peak-to-peak amplitude of 1.5mm traversing the frequency range & returning in 1 minute; 3 right angled directions for 2 hours Shock: 50G (490m/s2) acceleration (tested in 6 right angled directions, with 5 shocks in each direction) PCB Processing Soldering: Wave Soldering recommended: See Profile A in Supplement section. Manual Soldering: See Profile A in Supplement section. Cleaning: Automated cleaning. See Cleaning specifications in Supplement section. Standards & Certifications The G Series toggles have not been tested for UL recognition or CSA certification. These switches are designed for use in a low-voltage, low-current, logic-level circuit. When used as intended in a logic-level circuit, the results do not produce hazardous energy.
Series GProcess Sealed Ultra-Miniature Toggles www.nkk.com A35 IndicatorsAccessoriesSupplement Tactiles KeylocksRotaries PushbuttonsIlluminated PBSlides Programmable A TogglesRockersTouch Tilt Distinctive Characteristics Ultra-miniature size allows high density mounting, and extremely light weight of 0.25 gram makes these switches ideal for handheld equipment. Totally sealed body construction prevents contact contamination and allows time- and money-saving automated soldering and cleaning. Molded-in, epoxy sealed terminals lock out flux, solvents, and other contaminants. Award-winning STC contact mechanism with benefits unavailable in conventional mechanisms: smooth, positive detent actuation, increased contact stability, and unparalleled logic-level reliability. (Additional STC details in Terms & Acronyms; see Supplement section.) .100” x .100” (2.54mm x 2.54mm) terminal spacing conforms to standard PC board grid spacing. Round terminals facilitate easier through-hole mounting on PC boards. Matching indicators available. Actual Size
Series G Process Sealed Ultra-Miniature Toggles www.nkk.comA36 IndicatorsAccessoriesSupplement Tactiles KeylocksRotaries PushbuttonsIlluminated PBSlides Programmable RockersTouch Tilt AToggles Poles
1 SPDT
2 DPDT
( ) = Momentary Connected Terminals Throw & Schematics Pole Model Up Center Down Up Center Down Note: Terminal numbers are not actually on the switch. SP G12 G13 G15 G18 G19 ON ON ON (ON) ON NONE OFF NONE OFF OFF ON ON (ON) (ON) (ON) 5-6 OPEN 5-4 SPDT DP G22 G23 G25 G28 G29 ON ON ON (ON) ON NONE OFF NONE OFF OFF ON ON (ON) (ON) (ON) 5-6 2-3 OPEN 5-4 2-1 DPDT Circuits
2 ON NONE ON
3 ON OFF ON
5 ON NONE (ON)
8 (ON) OFF (ON)
9 ON OFF (ON)
( ) = Momentary DESCRIPTION FOR TYPICAL ORDERING EXAMPLE G13AH POLES & CIRCUITS A .150” (3.8mm) Column Toggle H Actuator A .150” (3.8mm) Column Toggle Right Angle PC Terminals Slot Slot PC Terminals P Straight H Right Angle V Vertical 5 (COM) (COM) ACTUATOR A .150” (3.8mm) Column Toggle (4.0) Dia .157 (1.7) Dia .067 28° (3.8) .150 TYPICAL SWITCH ORDERING EXAMPLE
Series GProcess Sealed Ultra-Miniature Toggles www.nkk.com A37 IndicatorsAccessoriesSupplement Tactiles KeylocksRotaries PushbuttonsIlluminated PBSlides Programmable A TogglesRockersTouch Tilt P H VStraight Right Angle TYPICAL SWITCH DIMENSIONS Single & Double Pole Straight PC Single & Double Pole Right Angle PC On single pole models, locations 1 & 3 are for support pins. G19AP G19AH (2.54) Typ .100 (2.6) .102 (2.54) Typ .100 (0.4) Dia Typ .016 (7.0) .276 (4.5) .177 (0.4) Dia Typ .016 (2.54) Typ .100 (7.0) .276 (4.5) .177 (2.54) Typ .100 (0.5) Typ .020 (4.5) .177 (7.0) .276 (0.5) Typ .020 (2.54) Typ .100 (2.54) Typ .100 (0.4) Dia Typ .016 Single & Double Pole Vertical PC G22AV Slot (4.5) .177 28° (1.7) Dia .067 (4.0) Dia .157 (0.4) Dia Typ .016 (3.8) .150 (2.6) .102 (7.0) .276 (1.6) .063 (2.54) Typ .100 (7.0) .276 (2.54) .100 Slot (5.08) .200 (7.8) .307 (0.4) Dia Typ .016 (1.7) Dia .067 (4.0) Dia .157 (2.6) .102 (0.5) .020 (2.54) .100 (5.08) .200 (1.6) .063 (10.22) .402 (3.8) .150 32 1 4 5 6 (0.4) .016 (4.9) .193 (0.4) Dia Typ .016 (7.0) .276 (2.54) Typ .100 Slot (5.3) .209 (2.54) .100 (0.4) Dia Typ .016 28° (1.7) Dia .067 (4.0) Dia .157 (2.6) .102 (0.5) Typ .020 (2.54) Typ .100 (1.6) .063 (3.8) .150 (1.0) .039 (5.08) .200 (12.76) .502 (7.4) .292 (2.54) .100 (4.5) .177 (0.4) Dia Typ .016 (0.4) .016 (0.6) Dia Typ .024 (2.54) Typ .100 (2.54) .100 4 (0.6) Dia Typ .024 (2.54) Typ .100 (2.54) .100 1 (0.6) Dia Typ .024 (2.54) Typ .100 45 6 (5.08) .200 (0.6) Dia Typ .024 (2.54) Typ .100 (2.54) .100 12 3 45 6 (5.08) .200 (0.6) Dia Typ .024 (5.08) .200 (2.54) Typ .100 (2.54) .100 1 (0.6) Dia Typ .024 (5.08) .200 (2.54) Typ .100 (2.54) .100 4 CL Vertical 28° PC TERMINALS