FXR05A TAOGLAS | Alldatasheet
Document overview
- Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
- PDF pages: 10
Technical content
SPE-14-8-073/E/CM Page 1 of 10
SPE-14-8-073/E/CM Page 2 of 10
SPE-14-8-073/E/CM Page 3 of 10
SPE-14-8-073/E/CM Page 4 of 10 The test sample is placed on a thin sheet of plastic connected to the movable part of the fixture. Then the distance is carefully adjusted until the reader can no longer read the sample, thus the maximum interrogation distance is displayed in the ruler. Test sample Antenna Evaluation board Ruler Test fixture
SPE-14-8-073/E/CM Page 5 of 10 3.2. RFID tags used for test A total of 10 RFID tags were used to measure the interrogation distances. The next picture shows type 1, type 2 and type 4 tags, respectively. Type 1 tag is based on ISO/IEC 14443A standard and has 512 bytes of memory. Type 2 tag is based on ISO/IEC 14443A standard and has 192 bytes of memory. Type 4 is based on ISO / IEC 14443A 1-4 compliant and has 2K of memory. The next picture shows the Tag-it HF-I RFID tags from Texas Instruments: RI-102-112, RI-I11-112, RI-I03-112, RI-I16-112, Button and RI-I17-112. The Tag-it HF-I Plus Transponder Inlay family of Texas Instruments RFID is based on the ISO/IEC 15693 standard for contactless integrated circuit cards (vicinity cards) and ISO/IEC 18000-3 standard for item management.
SPE-14-8-073/E/CM Page 6 of 10
SPE-14-8-073/E/CM Page 7 of 10
SPE-14-8-073/E/CM Page 8 of 10 4. Mechanical Drawing
SPE-14-8-073/E/CM Page 9 of 10 5. Packaging
SPE-14-8-073/E/CM Page 10 of 10 Taoglas makes no warranties based on the accuracy or completeness of the contents of this document and reserves the right to make changes to specifications and product descriptions at any time without notice. Taoglas reserves all rights to this document and the information contained herein. Reproduction, use or disclosure to third parties without express permission is strictly prohibited. Copyright © Taoglas Ltd.