FXO-HC73 FOX | Alldatasheet

Document overview

  • Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
  • PDF pages: 14

Technical content

Features

Frequency Resolution to six decimal places Stabilities to ± 20 PPM -20 to +70°C or -40 to +85°C operating temperatures Tri-State Enable / Disable Feature Industry Standard Package, Footprint & Pin-Out Fully RoHS compliant Gold over Nickel Termination Finish Serial ID with Comprehensive Traceability

Applications

  • ANY application requiring an oscillator
  • SONET
  • Ethernet
  • Storage Area Network
  • Broadband Access
  • Microprocessors / DSP / FPGA
  • Industrial Controllers
  • Test and Measurement Equipment
  • Fiber Channel

Contents

Model Selection & Part Number Guide 2 Electrical Characteristic 2 Absolute Maximums 3 Output Wave Characteristics 3 Phase Noise 4 Jitter 4 Pin Assignment 5 Recommended Circuit 5 Reflow 5 Mechanical Drawing and Pad Layout 6 Tape and Reel Specification 7 Label 7 Traceability – LOT Number & Serial Identification 8 RoHS Material Declaration 9 SGS Report 10 & 11 Mechanical Test 12 Burn-In Test 12 MTTF / FITS calculations 13 Other X PRESSO Links 14 Fox Contact Information 14

Description

The Fox XPRESSO Crystal Oscillator is a breakthrough in configurable Frequency Control Solutions. X PRESSO utilizes a family of proprietary ASICs, designed and developed by Fox, with a key focus on noise reduction technologies. The 3 rd order Delta Sigma Modulator reduces noise to the levels that are comparable to traditional Bulk Quartz and SAW oscillators. The ASICs family has ability to select the output type, input voltages, and temperature performance features. With the X PRESS lead-time, low cost, low noise, wide frequency range, excellent ambient performance, XpressO is an excellent choice over the conventional technologies. Finished XPRESSO parts are 100% final tested. OUTPUT Enable / DisableV GND DD For more information -- Click on the drawing PRESSX FOX ASICs O

© 2008 FOX ELECTRONICS | ISO9001:2000 Certified This example, FXO-HC736R-106.25 = HCMOS Output, Ceramic 7 x 5mm Package, 3.3V, ±25 PPM Stability, -40 to +85°C Temperature Range, at 106.25 MHz

Electrical Characteristics

(unless otherwise noted) Frequency Range F O 0.750 to 250.000 MHz Frequency Stability 1 100, 50, 25, & 20 ppm Temperature Range TO TSTG Standard operating Optional operating Storage -20°C to +70°C -40°C to +85°C -55°C to +125°C Supply Voltage V DD Standard 3.3 V ± 5% Input Current (@ 15pF LOAD) I DD 0.75 ~ 20 MHz 20+ ~ 50 MHz 50+ ~ 130 MHz 130+ ~ 200 MHz 200+ ~ 250 MHz 32 mA 35 mA 47 mA 55 mA 60 mA Output Load HCMOS Standard Operational To 125MHz 15 pF 30 pF Start-Up Time T S 10 mS Output Enable / Disable Time 100 nS Moisture Sensitivity Level MSL JEDEC J-STD-20 1 Termination Finish Au Note 1 – Stability is inclusive of 25°C tolerance, operating temperature range, input voltage change, load change, aging, shock and vibration. Model Selection Guide & Fox Part Number 7 6 8 – 1 0 6 . 2 5 – 2 0 The 1st Field Product Code # 767 = FXO–HC5 768 = FXO–HC7 770 = FXO–LC5 771 = FXO–LC7 773 = FXO–PC5 774 = FXO–PC7 The 2nd Field The Customer’s Frequency The 3rd Field Fox Internally Generated Number (If any specification changes, the last digits change) (The same specs for a different customer also changes the last digits) STEP #2: The Fox Customer Service team provides a customer specific Part Number for use on their Bill Of Materials (BOM). Fox Part Number (The assigned Fox Part Number must be on the BOM – not the above Model Description) (This will ensure receipt of the proper part) 0 = ± 100 PPM 5 = ± 50 PPM 6 = ± 25 PPM 8 = ± 20 PPM (-20 ~ +70°C) 5 = 5 x 3.2mm 7 = 7 x 5mm C = Ceramic Q = Quartz blank = -20°C to +70°C R = -40°C to +85°C 3 = 3.3 V 2 = 2.5 V M = LVDS (pin 2 E/D) Q = LVPECL (pin 2 E/D) X = HCMOS (comp 2 nd Output) F X O – H C 7 3 6 R – 1 0 6 . 2 5 Frequency (in MHz) Resolutions to 6 places past the decimal point H = HCMOS L = LVDS P = LVPECL STEP #1: Customer selects the Model Description and provides to Fox Customer Service Model Description

© 2008 FOX ELECTRONICS | ISO9001:2000 Certified If 30% to 70% times are used, Rise and Fall times change to 1.5 nS from 0.75 to 250MHz If 20% to 80% times are used, Rise and Fall times change to 2 nS from 0.75 to 150MHz Absolute Maximum Ratings (Useful life may be impaired. For user guidelines only, not tested) Parameters Symbol Condition Maximum Value (unless otherwise noted) Input Voltage V DD –0.5V to +5.0V Operating Temperature T AMAX –55°C to +105°C Storage Temperature T STG –55°C to +125°C Junction Temperature 150°C ESD Sensitivity HBM Human Body Model 1 kV Output Wave Characteristics Parameters Symbol Condition Maximum Value (unless otherwise noted) Output LOW Voltage V OL 0.75 to 150 MHz 150+ to 250 MHz 10% VDD 20% VDD Output HIGH Voltage V OH 0.75 to 150 MHz 150+ to 250 MHz 90% VDD MIN 80% VDD MIN Output Symmetry (See Drawing Below) @ 50% V DD Level 45% ~ 55% Output Enable (PIN # 1) Voltage V IH > 70% V DD Output Disable (PIN # 1) Voltage V IL < 30% V DD Cycle Rise Time (See Drawing Below) T R 0.75 to 150 MHz 150+ to 250 MHz 3 nS (10%~90%) 3 nS (20%~80%) Cycle Fall Time (See Drawing Below) T F 0.75 to 150 MHz 150+ to 250 MHz 3 nS (90%~10%) 3 nS (80%~20%) 20% to 80% 10% to 90% 0V to V Rise Time Fall Time Times 80 - 20 50% V On Time Off Time 1/2 Period Period Ideally, Symmetry should be 50/50 -- Other expressions are 45/55 or 55/45 1/2 Period Rise Time / Fall Time Measurements Oscillator Symmetry 70 - 30 Times 30% to 70% DD DD

© 2008 FOX ELECTRONICS | ISO9001:2000 Certified Jitter is frequency dependent. Below are typical values at select frequencies. Phase Jitter is integrated from HP3048 Phase Noise Measurement System; measured directly into 50 ohm input; VDD = 3.3V. TIE was measured on LeCroy LC684 Digital Storage Scope, directly into 50 ohm input, with Amherst M1 software; VDD = 3.3V. Per MJSQ spec (Methodologies for Jitter and Signal Quality specifications) Rj and Dj, measured on LeCroy LC684 Digital Storage Scope, directly into 50 ohm input, with Amherst M1 software. Per MJSQ spec (Methodologies for Jitter and Signal Quality specifications) Phase Jitter & Time Interval Error (TIE) Frequency Phase Jitter (12kHz to 20MHz) T I E (Sigma of Jitter Distribution) Units 62.5 MHz 0.93 2.8 pS RMS 106.25 MHz 0.86 3.2 pS RMS 125 MHz 0.75 2.7 pS RMS 156.25 MHz 0.77 3.3 pS RMS Random & Deterministic Jitter Composition Frequency Random (Rj) (pS RMS) Deterministic (Dj) (pS P-P) Total Jitter (Tj) (14 x Rj) + Dj 62.5 MHz 1.28 6.8 25.1 pS 106.25 MHz 1.28 8.4 26.6 pS 125 MHz 1.20 8.0 25.2 pS 156.25 MHz 1.27 8.6 26.6 pS Phase Noise -160dBc -140dBc -150dBc -130dBc -120dBc -110dBc -90dBc -80dBc -100dBc -50dBc -70dBc -60dBc -20dBc -30dBc -40dBc 0 dBc -10dBc Data Collected using HP 3048A 1M100k10k100 1k Offset Frequency (10Hz to 40MHz) 40M10M

106.25 MHz

62.5 MHz

156.25MHz (dBc / Hz) vs. offset frequency Phase Noise Graph Three Frequencies from Jitter Tables 156.25MHz

© 2008 FOX ELECTRONICS | ISO9001:2000 Certified NOTE: XPRESSO HCMOS XOs are designed to fit on Industry Standard, 4 pad layouts Pin Description and Recommended Circuit Pin # Name Type Function

1 E / D 1 Logic Enable / Disable Control of Output (0 = Disabled)

2 GND Ground Electrical Ground for V DD

3 Output Output HCMOS Oscillator Output

4 VDD

2 Power Power Supply Source Voltage

Points N. C. Hi Z No Connection (Factory Use ONLY) NOTES: 1 Includes pull-up resistor to VDD to provide output when the pin (1) is No Connect. 2 Installation should include a 0.01µF bypass capacitor placed between VDD (Pin 4) and GND (Pin 2) to minimize power supply line noise. E / D V DD N. C. N. C. GND Output Terminations as viewed from the Top Enable / Disable Control Pin # 1 (state) Output (Pin # 3) OPEN (No Connection) ACTIVE Output “1” Level V IH > 70% VDD ACTIVE Output “0” Level V IL < 30% VDD High Impedance TP TP Soldering Reflow Profile (2 times Maximum at 260°C for 10 seconds MAX) 25°C 160°C 180°C 225°C 260°C

10 Seconds Max

within 5°C of 260°C peak Ramp Down Not to exceed 6°C/s Ramp-Up 3°C/s Max pt 120 ± 20 Seconds In Pre-heating Area Above 225°C Reflow Area 50±10 Seconds

400 Seconds MAX from +25°C to 260°C peak

(15 pF) N C # 4 # 3# 2 # 1 OUT 0.01 F DDV N C

© 2008 FOX ELECTRONICS | ISO9001:2000 Certified Mechanical Dimensional Drawing & Pad Layout Actual part marking is depicted. See Traceability (pg. 8) for more information Drawing is for reference to critical specifications defined by size measurements. Certain non-critical visual attributes, such as side castellations, reference pin shape, etc. may vary

5.2 Max

1.4 Max

7.5 Max

#1 #2 #1 TP* 1.4 5.08 2.6 2.0 1.8 4.2 TP*#4 2.54 Pin 1 Designator (FOX Head or Dot) Note: XPRESSO HCMOS XOs are designed to fit on industry standard, 4 pad, layouts. 5.08 Pin Connections #1) E/D #3 Output #2 GND #4 VDD *TP are test points and are NC Top View Bottom View

© 2008 FOX ELECTRONICS | ISO9001:2000 Certified An additional identification code is contained internally if tracking should ever be necessary Tape and Reel Dimensions Labeling (Reels and smaller packaging are labeled with the below) Ø1.5mm4.0mm 8.0mm 7.5mm 16mm 2.15mm 2.0 255.0 17.5 80.0 2.0 Ø13.0 Ø21.0 120° Ø21.0Ø13.0 17.5 2.0 178.0 62.0 2.0 2.0 2k Reel Dimensions 1k Reel Dimensions in mm in mm

  • Fox Part Number: 768-106.25-20
  • Quantity: 2000 pieces
  • LOT # 24435 If traceability should become necessary
  • Description: FXO-HC736R-106.25
  • Date Code 0745 (YYWW 2007 45 th wk)

© 2008 FOX ELECTRONICS | ISO9001:2000 Certified LOT Number The LOT Number has direct ties to the customer purchase order. The LOT Number is marked on the “Reel” label, and also stored internally on non-volatile memory inside the X PRESSO part. XPRESSO parts that are shipped Tape and Reel, are also placed in an Electro Static Discharge (ESD) bag and will have the LOT Number labeled on the exterior of the ESD bag. It is recommended that the X PRESSO parts remain in this ESD bag during storage for protection and identification. If the parts become separated from the label showing the LOT Number, it can be retrieved from inside one of the parts, and the information that can be obtained is listed below:

  • Customer Purchase Order Number
  • Internal Fox Sales Order Number
  • Dates that the X PRESSO part was shipped from the factory
  • The assigned customer part number
  • The specification that the part was designed for Serial Identification The Serial ID is the individualized information about the configuration of that particular XPRESSO part. The Serial ID is unique for each and every XPRESSO part, and can be read by special Fox equipment. With the Serial ID, the below information can be obtained about that individual, XPRESSO part:
  • Equipment that the X PRESSO part was configured on
  • Raw material used to configure the X PRESSO part
  • Traceability of the raw material back to the foundries manufacturing lot
  • Date and Time that the part was configured
  • Any optimized electrical parameter s based on customer specifications
  • Electrical testing of the actual completed part
  • Human resource that was monitoring the configuration of the part Fox has equipment placed at key Fox locations World Wide to read the Lot Identification and Serial Number of any XPRESSO part produced and can then obtain the information from above within 24 hours Traceability – LOT Number & Serial Identification

© 2008 FOX ELECTRONICS | ISO9001:2000 Certified Material Name Component Content Content (mg) （ｗｔ％） (CAS Number) Cover Kovar Nickel (Ni) 5.09 3.63% 7440-02-0 Cobalt (Co) 3.15 2.24% 7440-48-4 Iron (Fe) 9.47 6.75% 7439-89-6 Base Ceramic Alumina (Al 2O3) 79.178 56.4% 1344-28-1 Silicon Oxide (SiO 2) 3.143 2.24% 14808-60-7 Chromium Oxide (Cr 2O3) 3.379 2.41% 1308-38-9 Titanium Oxide (TiO 2) 0.873 0.622% 13463-67-7 Magnesium Oxide (MgO) 0.437 0.311% 1309-48-4 Calcium Oxide (CaO) 0.297 0.212% 1305-78-8 + Metallization Tungsten (W) 12.272 8.74% 7440-33-7 Molybdenum (Mo) 0.380 0.27% 7439-98-7 + Nickel Plating Nickel (Ni) 4.740 3.38% 7440-02-0 Cobalt (Co) 0.395 0.28% 7440-48-4 + Gold Plating Gold (Au) 0.624 0.445% 7440-57-5 ＋Seal ring Iron (Fe) 5.809 4.14% 7439-89-6 Nickel (Ni) 3.119 2.22% 7440-02-0 Cobalt (Co) 1.829 1.30% 7440-48-4 ＋silver solder Silver (Ag) 2.269 1.62% 7440-22-4 Copper (Cu) 0.400 0.285% 7440-50-8 ＩＣ ＩＣ Aluminum (Al) 0.0021 0.00150% 7429-90-5 Silicon (Si) 0.950 0.68% 7440-21-3 Gold Gold (Au) 0.480 0.342% 7440-57-5 Adhesive Silver (Ag) 0.000210 0.000150% 7440-22-4 Epoxy 0.0000700 0.0000499% Crystal Crystal Silicon Dioxide (SiO 2) 2.04 1.45% 14808-60-7 Electrode Silver (Ag) 0.019 0.0135% 7440-22-4 Nickel (Ni) 0.000159 0.000113% 7440-02-0 Adhesive Silver (Ag) 0.00037 0.000264% 7440-22-4 Silicon (Si) 0.000125 0.000089% 7440-21-3 TOTAL 140.3 100.00% RoHS Material Declaration

© 2008 FOX ELECTRONICS | ISO9001:2000 Certified 3rd Party (SGS) Material Report

© 2008 FOX ELECTRONICS | ISO9001:2000 Certified 3rd Party (SGS) Material Report (continued)

© 2008 FOX ELECTRONICS | ISO9001:2000 Certified Burn-In Testing – under power 2000 Hours, 125°C Mechanical Testing Parameter Test Method Mechanical Shock Drop from 75cm to hardwood surface – 3 times Mechanical Vibration 10~55Hz, 1.5mm amplitude, 1 Minute Sweep

2 Hours each in 3 Directions (X, Y, Z)

High Temperature Burn-in Under Power @ 125°C for 2000 Hours (results below) Hermetic Seal He pressure: 4 ±1 kgf / cm 2 2 Hour soak 2,000 Hour Burn-In

© 2008 FOX ELECTRONICS | ISO9001:2000 Certified Products are grouped together by process for MTTF calculations. (All XpressO output and package types are manufactured with the same process) Number of Parts Tested: 360 (120 of each output type: HCMOS, LVDS, LVPECL) Number of Failures: 0 Test Temperature: 125°C Number of Hours: 2000 MTTF was calculated using the following formulas: [1.] Device Hours (devhrs) = (number of devices) x (hours at elevated temperature in °K) [2.] 2 χ ××= afdevhrsMTTF [3.] FITS = MTTF 1 * 109 Where: Label Name Formula/Value af Acceleration Factor e ttk eV )11()( eV Activation Energy 0.40 V k Bolzman’s Constant 8.62 X 10 -5 eV/°K t1 Operating Temperature (°K) t2 Accelerated Temperature (°K) Θ Theta Confidence Level (60% industry standard) r Failures Number of failed devices χ2 Chi-Square statistical significance for bivariate tabular analysis [table look- up] based on assumed Θ (Theta – confidence) and number of failures (r) For zero failures (60% Confidence): χ2 = 1.830 DEVICE-HOURS = 360 x 2000 HOURS = 720,000 ACCELERATION FACTOR = e )398 298 1()625.8 40.0( −× = 49.91009 MTTF = 833.1 291009.49000,720 ×× = 15,607,065 Hours Failure Rate = 291009.49000,720 833.1 = 6.41E-8 FITS = Failure Rate *1E9 = 64 MTTF / FITS Calculations

© 2008 FOX ELECTRONICS | ISO9001:2000 Certified Other XPRESSO Links XPRESSO Brochure Crystal Oscillators HCMOS 5 x 3.2mm 3.3V XO 0.75 to 250MHz HCMOS 7 x 5mm 3.3V XO 0.75 to 250MHz LVPECL 5 x 3.2mm 3.3V XO 0.75 to 1.35GHz LVPECL 7 x 5mm 3.3V XO 0.75 to 1.35GHz LVDS 5 x 3.2mm 3.3V XO 0.75 to 1.35GHz LVDS 7 x 5mm 3.3V XO 0.75 to 1.35GHz Voltage Controlled Crystal Oscillators HCMOS 5 x 3.2mm 3.3V VCXO 0.75 to 250MHz HCMOS 7 x 5mm 3.3V VCXO 0.75 to 250MHz LVPECL 5 x 3.2mm 3.3V VCXO 0.75 to 1.35GHz LVPECL 7 x 5mm 3.3V VCXO 0.75 to 1.35GHz LVDS 5 x 3.2mm 3.3V VCXO 0.75 to 1.35GHz LVDS 7 x 5mm 3.3V VCXO 0.75 to 1.35GHz Main Website www.foxonline.com Patent Numbers: US 6,664,860, US 5,960,403, US 5,952,890; US 5,960,405; US 6,188,290; China ZL 98802217.6, Malaysia MY-118540-A, Philippines 1-1998-000245, Hong Kong #HK1026079, Mexico #232179 US and Foreign Patents Pending XpressO™ Fox Electronics Contact Information Fox Hong Kong Fox Japan Outside US: +1.239.693.0099, Fax:+1.239.693.1554 Fox EMEA Fox Taiwan Email: www.foxonline.com/email.htm Fax:+886-2-22073486 Email: www.foxonline.com/email.htm The above specifications, having been carefully prepared and checked, is believed to be accurate at the time of publication; however, no responsibility is assumed by Fox Electronics for inaccuracies. Notes :