DATASHEET SEARCH SITE | WWW.ALLDATASHEET.COM

Document overview

  • Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
  • PDF pages: 12

Technical content

Features

 1.0V to 3.6V VCC Supply Voltage  Converts Any Voltage (1.0V to 3.6V) to (1.0V to 3.6V)  4.6V Tolerant Inputs and Outputs  tPD: - 4ns Typical for 3.0V to 3.6V VCC  Power-Off High Impedance Inputs and Outputs  Static Drive (IOH/IOL): - ±2.6mA at 3.00V VCC  Uses Proprietary Quiet Series™ Noise / EMI Reduction Circuitry  Ultra-Small Micropak™ Leadless Packages  Ultra-Low Dynamic Power

Description

The FXLP34 is a single translator with two separate supply voltages: V CC1 for input translation voltages and VCC for output translation voltages. The FXLP34 is part of Fairchild’s Ultra Low Power (ULP) series of products. This device operates with V CC values from 1.0V to 3.6V, and is intended for use in portable applications that require ultra low power consumption. The internal circuit is composed of a minimum of buffer stages, to enable ultra low dynamic power. The FXLP34 is uniquely designed for optimized power and speed, and is fabricat ed with an advanced CMOS technology to achieve high-speed operation while maintaining low CMOS power dissipation.

Ordering Information

Part Number Top Mark Package Packing Method FXLP34P5X X34 5-Lead SC70, EIAJ SC-88a, 1.25mm Wide 3000 Units on Tape & Reel FXLP34L6X X3 6-Lead MicroPak™, 1.00mm Wide 5000 Units on Tape & Reel FXLP34FHX X3 6-Lead, MicroPak2, 1x1mm Body, .35mm Pitch 5000 Units on Tape & Reel Micropak™ and Quiet Series™ are trademarks of Fairchild Semiconductor Corporation.

Figure 1. SC70 (Top View) Figure 2. MicroPak™ (Top Through View)

5 NC No Connect

© 2006 Fairchild Semiconductor Corporation www.fairchildsemi.com FXLP34 • Rev. 1.0.4 3 FXLP34 — Single Bit Uni-Directional Translator Absolute Maximum Ratings Stresses exceeding the absolute maximum ratings may damage the device. The devic e may not function or be operable above the recommended operating c onditions and stressing the parts to these levels is not recommended. In addition, extended exposure to stresses above the recommended operating conditions may affect device reliability. The absolute maximum ratings are stress ratings only. Symbol Parameter Min. Max. Unit VCC, VCC1 Supply Voltage -0.5 +4.6 V VIN DC Input Voltage -0.5 +4.6 V VOUT DC Output Voltage HIGH or LOW State(1) -0.5 V CC +0.5V V VCC=0V -0.5 +4.6 IIK DC Input Diode Current V IN < 0 -50 mA IOK DC Output Diode Current VOUT < 0V -50 mA VOUT > VCC +50 IOH/IOL DC Output Source/Sink Current ±50 mA ICC or IGND DC V CC or Ground Current per Supply Pin ±100 mA TSTG Storage Temperature Range -65 150 °C PD Power Dissipation at +85°C SC70-6 180 mW MicroPak™-6 130 MicroPak2™-6 120 ESD Human Body Model, JEDEC:JESD22-A114 4000 V Charge Device Model, JEDEC:JESD22-C101 2000 Note: 1. I O Absolute Maximum Rating must be observed. Recommended Operating Conditions The Recommended Operating Conditions table defines the conditions for actual device oper ation. Recommended operating conditions are specified to ens ure optimal performance to the datasheet specificat ions. Fairchild does not recommend exceeding them or designing to Absolute Maximum Ratings. Symbol Parameter Conditions Min. Max. Unit VCC, VCC1 Supply Voltage 1.0 3.6 V VIN Input Voltage 0 3.6 V VOUT Output Voltage HIGH or LOW State 0 V CC V VCC=0V 0 3.6 IOH/IOL Output Current in I OH/IOL VCC=3.0 to 3.6V ±2.6 mA VCC=2.3 to 2.7V ±2.1 VCC=1.65 to 1.95V ±1.5 VCC=1.40 to 1.60V ±1.0 VCC=1.10 to 1.30V ±0.5 VCC=1.0V ±20 µA TA Operating Temperature, Free Air -40 +85 °C JA Thermal Resistance SC70-6 425 °C/W MicroPak™-6 500 MicroPak2™-6 560 Note: 2. Unused inputs must be held HIGH or LOW. They may not float.

© 2006 Fairchild Semiconductor Corporation www.fairchildsemi.com FXLP34 • Rev. 1.0.4 4 FXLP34 — Single Bit Uni-Directional Translator

Electrical Characteristics

Symbol Parameter Condition V CC (V) V CC1 (V) TA=+25°C T A=-40 to +85°C Unit Min. Max. Min. Max. VIH HIGH Level Input (VCC1) 1.0 to 3.6 1.0 0.65 x V CCI 0.65 x V CCI V 1.10VCC11.30 0.65 x VCCI 0.65 x V CCI 1.40VCC11.60 0.65 x VCCI 0.65 x V CCI 1.65VCC11.95 0.65 x VCCI 0.65 x V CCI VIL LOW Level Input 1.0 to 3.6 1.0 0.35 x V CCI 0.35 x V CCI V 1.10VCC11.30 0.35 x V CCI 0.35 x V CCI 1.40VCC11.60 0.35 x V CCI 0.35 x V CCI 1.65VCC11.95 0.35 x V CCI 0.35 x V CCI VOH HIGH Level Output (VCC) IOH=-20µA 1.0 1.0 to 3.6 VCC-0.1 V CC-0.1 V 1.10VCC11.30 VCC-0.1 V CC-0.1 1.40VCC11.60 VCC-0.1 V CC-0.1 1.65VCC11.95 VCC-0.1 V CC-0.1 2.30VCC12.70 VCC-0.1 V CC-0.1 3.00VCC13.60 VCC-0.1 V CC-0.1 IOH=-0.5mA 1.10VCC11.30 1.0 to 3.6 0.75 x VCC 0.70 x V CC VOL LOW Level Output IOL=20µA 1.0 1.0 to 3.6 0.1 0.1 V IOL=0.5mA 1.10VCC11.30 1.0 to 3.6 0.30 x V CC 0.30 x V CC IIN Input Leakage Current 0 V IN IOFF Power Off Leakage Current 0 (V IN, VO) 3.60 0 0 1.0 5.0 µA ICC Quiescent Supply Current V IN=VCC or Continued on the following page…

Figure 5. 5-Lead, SC70, EIAJ SC-88a, 1.25mm Wide warranty therein, which covers Fairchild products. http://www.fairchildsemi.com/products/analog/pdf/sc70-5_tr.pdf.

  1. DIMENSIONS ARE IN MILLIMETERS
  2. CONFORMS TO JEDEC STANDARD M0-252 VARIATION UAAD
  3. FILENAME AND REVISION: MAC06AREV4
  4. DRAWING CONFORMS TO ASME Y14.5M-1994

0.075 X 45

0.10 CBA

  1. PIN ONE IDENTIFIER IS 2X LENGTH OF ANY

OTHER LINE IN THE MARK CODE LAYOUT. Figure 6. 6-Lead, MicroPak™, 1.0mm Wide warranty therein, which covers Fairchild products. http://www.fairchildsemi.com/products/logic/pdf/micropak_tr.pdf.

B. DIMENSIONS ARE IN MILLIMETERS. Figure 7. 6-Lead, MicroPak2™, 1x1mm Body, .35mm Pitch warranty therein, which covers Fairchild products. http://www.fairchildsemi.com/packaging/MicroPAK2_6L_tr.pdf.

© 2006 Fairchild Semiconductor Corporation www.fairchildsemi.com FXLP34 • Rev. 1.0.4 12 FXLP34 — Single Bit Uni-Directional Translator