FX5-80P-SH

FX5-20P-SH HIROSE | Alldatasheet

Document overview

• Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
• PDF pages: 7

Technical content

1mm Pitch Connector for Vertical Connection FX5 Series I Features 1. Header Side : 2 Types Available Two header types, low profile and high profile, are prepared according to the contact number variation and the connecting height variation, considering unit connections of HDD, FDD, CD- ROM and so on. 2. Two-stages Sequential Structure The connecting sequence is designed with 2 stages so that the end user side can maintain. 3. Mating Guide In the connecting process, the self-alignment is ±1mm high sufficient to the guide level, and the guide rib is provided to achieve easy mating. 4. SMT Coplanarity The coplanarity of SMT soldered area secures the high accuracy of 0.1mm. 5. Miniaturization The connector is miniaturized about 30% in the mounting area, compared with the conventional half pitch connector (1.27mm). I Applications Note PC , other business equipments PCB ( 3.6 ) PCB 6.6 Connecting Height: Low profile Connecting Height: High profile

Insulator Polyamide Beige UL94V-0 Header Contact Brass Contact area : Gold plated ________ Receptacle Contact Phosphor bronze Lead area : Tin-lead plated ________ 1. Insulation Resistance 100Mohms min. 250V DC 2. Withstanding voltageNo flashover or insulation breakdown. 300V AC/1 minute 3. Contact Resistance 50mohms max. 100mA 4. Vibration No electrical discontinuity of 1µs or more Frequency: 10 to 55 Hz, single amplitude of 0.75 mm, 2 hours in each of the 3 directions. 5.Moisture Resistance Contact resistance: 60mohms max. Insulation resistance: 100Mohms min. 96 hours at temperature of 40ç and humidity of 90% to 95% 6. Temperature Cycle Contact resistance: 60mohms max. (-55 ç: 30 minutes, 15 to 35ç: 2 to 3 minutes Insulation resistance: 100Mohms min. (-85ç: 30 minutes, 15 to 35ç: 2 to 3minutes) 5 cycles 7. Durability (Mating/un-mating)Contact resistance: 60mohms max. 500 cycles 8.Resistance to Soldering heatNo deformation of components affecting performance. Reflow: At the recommended temperature profile Manual soldering: 300ç for 3 seconds I Product Specifications Rating Current rating 0.5A Operating Temperature Range -55ç to +85ç (Note 1)Storage Temperature Range -10ç to +60ç (Note 2) Voltage rating 100V ACOperating Humidity Range40% to 80% Storage Humidity Range 40% to 70% Note 1: Includes temperature rise caused by current flow. Note 2: The term "storage" refers to products stored for long period of time prior to mounting and use. Operating Temperature R ange and Humidity range covers non conducting condition of installed connectors in storage, shipment or during transportation. Note : The black dots on the insulater will not affect performance. Note: The 56 contact header is for SH 3 type only. Item Specifications Condition I Material Part Material Finish Remarks I Ordering Information G Header tConnector Height Blank : 6.5mm 3 : 9.5mm qSeries Name : FX5 wNumber of Contacts : 20, 40, 52, 56, 68, 80 eConnector Type P: Header rContact type SH : Right angle SMT type FX5 – * P – SH 3 G Receptacle yContact type DSA : Straight through hole type uBoard prefixed pin Blank : Without board prefixed pin L : With board Prefixed pin qSeries Name : FX5 wNumber of Contacts : 20, 40, 52, 56, 68, 80 eConnector Type S: Receptacle rContact Sequence 2 : 2 Stages Sequence tSerial No. : A FX5 – * S 2 A – DSA L qw e r t y u qw e r t

20 9 24 22.9 19 9.5 20 13.6 FX5-20P-SH3 575-0041-1 FX5-40P-SH 575-0005-8 40 19 34 32.9 29 19.5 30 23.6 FX5-40P-SH3 575-0045-2 FX5-52P-SH 575-0006-0 52 25 40 38.9 35 25.5 36 29.6 FX5-52P-SH3 575-0046-5 FX5-56P-SH3 575-1001-2 56 27 42 40.9 37 27.5 38 31.6 FX5-68P-SH 575-0008-6 68 33 48 46.9 43 33.5 44 37.6 FX5-68P-SH3 575-0048-0 FX5-80P-SH 575-0009-9 80 39 54 52.9 49 39.5 50 43.6 FX5-80P-SH3 575-0049-3 A 6.5±0.3 6±0.3 (0 . 5) Polarity Mark D±0.3 B±0.3 0.5 E F±0.3 1.7±0.3 9.3±0.3 C±0.5 1 0 _0.2 2.5±0.3 1.4±0.3 2_Ø2.3±0.15 G±0.1 2.5±0.3 3.2±0.2 6.35±0.3 ( 1.3 ) A C±0.5 1.7±0.3 9.5±0.3 6±0.3 (3 . 5 ) 9.3±0.3 Polarity Mark D±0.3 B±0.3 0.5 E F±0.3 3.2±0.2 G±0.1 2.5±0.3 6.35±0.3 2_Ø2.3±0.15 (1 . 3 ) 1 0 _0.2 2.5±0.3 1.4±0.3 a1 b1 a1 b1 ** * == (number of contacts)/2 Unit: mm Part Number CL No. Number of Contacts ABCDEFG I Header High profileLow profile

Unit: mm FX5-20S2A-DSA 575-0101-1 20 9 19 15.08 __ a1,a2,a9,a10 a3 to a8 FX5-20S2A-DSAL 575-0121-9 15 b1,b2,b9,b10 b3 to b8 FX5-40S2A-DSA 575-0105-2 40 19 29 25.08 __ a1,a2,a19,a20 a3 to a18 FX5-40S2A-DSAL 575-0125-0 25 b1,b2,b19,b20 b3 to b18 FX5-52S2A-DSA 575-0106-5 52 25 35 31.08 __ a1,a2,a25,a26 a3 to a24 FX5-52S2A-DSAL 575-0126-2 31 b1,b2,b25,b26 b3 to b24 FX5-56S2A-DSA 575-0107-8 56 27 37 33.08 __ a1,a2,a27,a28 a3 to a26 FX5-56S2A-DSAL 575-0127-5 33 b1,b2,b27,b28 b3 to b26 FX5-68S2A-DSA 575-0108-0 68 33 43 39.08 __ a1,a2,a33,a34 a3 to a32 FX5-68S2A-DSAL 575-0128-8 39 b1,b2,b33,b34 b3 to b32 FX5-80S2A-DSA 575-0109-3 80 39 49 45.08 __ a1,a2,a39,a40 a3 to a38 FX5-80S2A-DSAL 575-0129-0 45 b1,b2,b39,b40 b3 to b38 I Receptacle 0.6±0.3 E – E F – F 4.25±0.2 6±0.3 a2 1 B ±0.3 C E E F F A ±0.2 * = (number of contacts)/2 +0.1 –0.2 1.5±0.2 3±0.3 Polarity Mark Part Number CL No. Number of Contacts ABCD Order of Contact Sequence(Contact No.)

FX5-*-SH, FX5-*-SH3 G Receptacle FX5-*S2A-DSA FX5-*S2A-DSAL (5.95) 3.15±0.12.55±0.1 2.1±0.1 a2(Polarity mark position) (Mating side) 4±0.1 2.05±0.05 0.5±0.02 C ±0.05 2.15±0.1 3.4±0.1 B ±0.05 A ±0.1 4±0.1 0.3±0.03 (Land pattern) 0.25±0.03 (Metal mask) D±0.1 * = (number of contacts)/2 2-Ø2.3 2-Ø1.4±0.05 +0.1 (Polarity mark position) * = (number of contacts)/2Ø0.6 b* E ±0.1 1±0.05 b1 b4 b3b2 +0.1 1.5±0.051.5±0.05 1.5±0.05 * = (number of contacts)/2 2-Ø2.3 F ±0.1 E ±0.1 1±0.05 3±0.05 (Polarity mark position) Ø0.6 b* b1 b4 b3b2 +0.1 +0.1 1.5±0.05 1.5±0.05 1.5±0.05 Number of Contacts ABCDEF 20 16 13.6 9.5 20 9 15 40 26 23.6 19.5 30 19 25 52 32 29.6 25.5 36 25 31 56 34 31.6 27.5 38 27 33 68 40 37.6 33.5 44 33 39 80 46 43.6 39.5 50 39 45 Note: If the connector is installed in the board beyond the above recommended size, it may cause the connector to board mounting failure or the soldering failure. It is desirable to implement the board process on the recommended PCB mounting pattern. Unit: mm

BRecommended Temperature Profile BCleaning Conditions Less than 5 seconds 230ç 200ç 160ç 150ç 25ç 30 seconds 60 seconds START Time (Second) 60 120 20~30 seconds SolderingPreheating 60~90 seconds 250 200 150 100 (ç) Temperature 1. Organic Solvent Cleaning IPA (Isopropyl alcohol) HCFC (Hydrochlorophloro carbon) Solvent Cold Cleaning Heat Cleaning *Methylene chroride isn't suitable for this product solvent. 2. Liquid Cleaning When liquid detergents (such as terpene, alkali saponifier) are used, please select the cleaning detergent according to the influence table on metal or resin which is issued from each detergent manufacturer.In addition, please do not leave the connector outdoor, in which moisture remains. 3. Cautions for Cleaning As for organic solvent or liquid cleaning, if flux or detergent remains on the connector, it can cause electrical performance degradation. Therefore, please make sure that the connector is thoroughly cleaned so that neither flux nor detergent is found on the connector. Applicable Conditions Reflow system :IR reflow Solder : Paste type 63 Sn/37 Pb (Flux content 9 wt%) Test board : Glass epoxy 85mm x 60mm x 1.6 mm Metal mask thickness: 0.15 mm Recommended temperature profile. The temperature may be slightly changed according to the solder paste type and amount.

( 3.6) FX5-πP-SH Nut (M2) Plain sheet (t = 0.3) Board (t = 1.6) Spring sheet (t = 0.5)Screw (M2) PCB Prefixed pin Dip post FX5-*P-SH3 ( 6.6) PCB BConnector Precautions 1. Tolerance Clearance on Mating Side The effective connection clearance of the product is 1.6mm. Please use the product so as to specify within 1mm the clearance between the header and the receptacle in the connection process. 2. Header Connector Height The SMT connector height doesn't include the solder paste thickness. Thus, please consider that the stacking height will slightly increase after the mounting process. 3. Screw Fastening Torque (SMT Type) When the screw is fastened, please use the M2 screw. The recommended fastening torque is 0.15(N.m) max. 5. Plug and Play When the connector is inserted or extracted in the active line state, please contact HRS company. 6. Others G It is noted that the forced excessive insertion/extraction will result in damage. G Avoid holding the board with the connector only, and fix the board by any other means except for the connector. G The color phase of this product may be slightly different from that of the forming product according to the manufacturing lot, but the difference doesn't affect the performance. 4. Prefixed Process to Board (Through hole Type) If the prefixed process is required for board mounting, please use the prefixed pin type. (Applicable Thickness t = 1.6±0.1) Note: When the connector is mounted on the board, the dip post is guided into the board through-hole in order to prevent the dip post damage, and then insert the board in parallel to the connector so as to push in the prefixed pin. Mating Height: Low profile Mating Height: High profile