FX1-144S-1.27DS HIROSE | Alldatasheet

Document overview

  • Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
  • PDF pages: 8

Technical content

1.27mm Pitch Connector FX1 Series Power Supply Ground Signal Mating Removal FX1V (3 step sequence) DIN duplex density mount has been achieved. (DIN 96 contacts and FX1 192 (96x2) Photo 1 Sequence Structure (Pin contact sequence) Row B Row A, row C B1 to B4, B45to B52, B93to B96 B5 to B44, B53to B92 Row A, row C *FX1 Series (2 step sequence) *FX1 Series (3 step sequence) Figure 2 Setting row B to ground, if active cable insertion and extraction are performed as power supply, arc will occur between contact and contact. The row B contact structure is constructed to separate arc occurrence point a and normal contact point b, and minimizes affects on the contact. I Features 1. High density and space saved-DIN Duplex Mount Achieved The alignment of the mating area in 4-row allows to duplex the number of contacts in the nearly equivalent mount square as for the conventional DIN connector.(Refer to photo (1).) 2. High Current and High Voltage Two-thirds of total contact numbers are used for half pitch signaling contact, while the other one-third thereof is used for the power ground contact. Power ground contact corresponds to high current (1A) and high voltage (250V). 3. Sequence Structure Considering insertion/extraction in active power mode and maintenance on the end user side, the FX series is designed in a mechanism that can afford the time different contact at three steps. (For details, refer to Figure (2) as shown on the right.) 4. Mis-insertion Prevent Provide the insertion guide on both ends of connector, and widen an inductive area in order to prevent mis-insertion.

Current rating Voltage rating Signal Contact: 0.5A Signal Contact: 125V AC Operating Temperature Range-55to 85ç (Note 1)Storage Temperature Range -10to +60ç(Note 2) Power Supply Contact: 1APower Supply Contact: 250V ACOperating Humidity Range -40 to 80% Operating Humidity Range-40 to 70%(Note 2) Item Specification Condition 1. Insulation Resistance 1000Mohms min. 250V DC 2. Withstanding VoltageNo flashover or insulation breakdown. 1 minute Signal contact 300V AC Power supply contact 600V AC 3. Contact Resistance 60mohms max. (conductor resistance included) 100mA 4. Vibration No electrical discontinuity of 1µs or more Frequency: 10 to 55 Hz, single amplitude of 0.75 mm, 2 hours in each of the 3 directions. 5. Humidity (Steady state) Contact resistance: 70mohms max. 96 hours at temperature of 40ç and humidity of 90% to 95%Insulation resistance: 1000Mohms min. 6. Temperature Cycle Contact resistance: 70mohms max. (-55ç: 30 minutes¡ 15-to 35ç: 5 minutes max.¡ Insulation resistance: 1000Mohms min. (-85ç: 30 minutes¡ 15-to 35ç: 5 minutes max.) 5 cycles 7. Durability (Mating/un-mating)Contact resistance: 70 mohms max. 500 cycles I Material Contact Prefixed pin Insulator Straight header Right angle header Receptacle Header Receptacle Brass Phosphor bronze Phosphor bronze Phosphor bronze PPS PPS/ PTB Contact area:Gold plated Lead area:Tin-lead plated Tin-lead plated Black UL94V-0 Parts Material Finish Remarks G FX1 Series Contact Prefixed pin Insulator Header Receptacle Phosphor bronze Phosphor bronze LCP PPS/ PTB Contact area:Gold plated Lead area:Tin-lead plated Tin-lead plated Black UL94V-0 Parts Material Finish Remarks G FXV Series Note 1: Includes temperature rise caused by current flow. Note 2: The term "storage" refers to products stored for long period of time prior to mounting and use. Operating Temperature R ange and Humidity range covers non conducting condition of installed connectors in storage, shipment or during transportation.

FX1 - 192 P - 1.27 DSA L qe wr t y rContact pitch: 1.27mm tContact type: DS : Right angle DSA : Straight yL: Board prefixed pin qSeries Name : FX1 wNumber of contacts: 192, 216 eConnector type : P-header : S-receptacle G FX1 Series FX1V A - 192 P - DSA L qe wr t y rConnector type: P-header S-receptacle tContact type: DS : Right angle DSA : Straight yL: Board prefixed pin qSeries Name : FX1V wA: Cleaning type (header side only) Blank: No cleaning type eNumber of contacts : 288 G FX1V Series Note: The cleaning type only is applied on the header side to FX1 series. Note 1. Cleaning type: the liquid escape hole is added at dip cleaning. No cleaning type: no liquid escape hole is added at dip cleaning. Note 2. The FX1V series omits the contact pitch. BApplication Pattern

I Receptacle : Right Angle Type C DPart Number CL No. BANumber of Contacts 144 192 216 73.29 93.61 103.77 68.08 88.4 98.56 59.69 80.01 90.17 ____ 67.31 ____ 87.63 ____ 97.79 FX1-144S-1.27DS FX1-144S-1.27DSL FX1-192S-1.27DS FX1-192S-1.27DSL FX1-216S-1.27DS FX1-216S-1.27DSL 571-0003-7 571-0053-5 571-0004-0 571-0054-8 571-0005-2 571-0055-0 Unit: mm BPCB mounting pattern Applicable board thickness t=1.6mm FX1 Series

I Header : Straight Type BPCB mounting pattern Applicable board thickness t=1.6mm DPart Number CL No. BANumber of Contacts 144 192 216 73.29 93.61 103.77 59.69 80.01 90.17 ____ 69.85 ____ 90.17 ____ 100.33 FX1-144P-1.27DSA FX1-144P-1.27DSAL FX1-192P-1.27DSA FX1-192P-1.27DSAL FX1-216P-1.27DSA FX1-216P-1.27DSAL 571-0303-0 571-0353-9 571-0304-3 571-0354-1 571-0305-6 571-0355-4 Unit: mm

I Header : Right Angle Type BPCB mounting pattern Applicable board thickness t=1.6mm Part Number CL No. Number of Contacts 144 FX1-144P-1.27DS FX1-144P-1.27DSL 571-0203-6 571-0253-4

I Receptacle : Right Angle Type I Header : Straight Type BPCB mounting pattern Recommended board thickness t=1.6mm (lead length: 3mm) BPCB mounting pattern Recommended board thickness t=1.6mm (lead length: 3.4mm) FX1V Series Part Number CL No. FX1V-288S-DS FX1V-288S-DSL 571-0606-2 571-0656-0 Part Number CL No. FX1V-288P-DSA FX1V-288P-DSAL FX1VA-288P-DSA FX1VA-288P-DSAL 571-0906-6 571-0956-4 571-1006-0 571-1056-9 Liquid escape hole With hole : Cleaning type Without hole : No Cleaning type

  1. Soldering (1)In the case of manual soldering, complete services under the condition of soldering iron bit temperature below 300ç for 2 seconds max. Please be sure to coat the contacts with solder so that no force is given. (2)In the case of dip soldering bath, complete service under the condition of soldering iron bit temperature below 260ç for 5 seconds max. 2. Prefixed function If the prefixed function is required, please use to the board prefixed pin type.