FX16M2-51P-HC

Hirose Electric

0.5mm pitch, Next Generation High Speed Wire-to-Board Connectors

Manufacturer: Hirose Electric

Document: 24 Pages / 1Mb

Request Quote Download Datasheet Read online HTML view

More from Hirose Electric Browse F parts

Online Datasheet

Read FX16M2-51P-HC online.

FX16 HIROSE | Alldatasheet

Document overview

Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
PDF pages: 24

Technical content

Features

1.Supports next-generation high speed transmissions FX16 Series supports next-generation high-speed signals including signal transmission of up to 6Gbps. The FX16 series delivers exceptional impedance-matching, even at sharp signal rise times of Tr=50ps (10 - 90%). (Fig.1) 2. V-by-One® HS compatible connector The FX16 Series connector is recommended by Thine Electronics, Inc. for their V-By-One ® HS next- generation panel interface, due to the connector’s outstanding signal integrity performance at 3.75Gb/ s - the top data rate of the interface. As shown in Fig.2 on the right, the eye pattern remains wide open at 3.75Gbps. (Please refer to the transmission property data shown on Page 4.) 3. A patented flip-lock harness simplifies FFC applications. We have incorporated our proprietary patented flip- lock design that greatly simplifies FFC assembly by eliminating the need for costly cable soldering (Fig.3). 4. Vertical cable plug The vertical plug mating style simplifies the assembly process. In addition, it offers a lower profile by limiting the mated height to only 8mm (Fig.4). 5. Multiple variations of plug style, cable type and number of positions available The series features a common plug for shielded FFC and micro coaxial cable. Available plug variations include right-angle, vertical style for batch harness assembly and direct plugin styles. Multiple position sizes are available (please see page 5 for variations). 6. RoHS compliant All materials and substances used to produce these parts fully comply with RoHS standards. (mv) +100 7CZ0OF)4DPNQBUJCMFDPOOFDUPS &ZF%JBHSBNʢ(CQTʣ ʲ4IJFMEFE''$NNIBNFTTʳ +200 -100 -200 "V-by-One HS" is a trade mark of Thine Electronics, Inc. Simplified FFC harness assembly with a flip-lock system Supports next generation high-speed transmission Vertical mating, horizontal wiring ᶃInsert the FFC into the plug Easy operation with the use of a side lock Direct plug-in style plug [Patented] wClose the ﬂ ip-lock eCompleted mating sequence FFC Vertical style plug Vertical mating Vertical style receptacle Fig.4 Fig.3 Fig.2 Fig.1 Designed for low mated height 8mm In cases where the application will demand a high level of reliability, such as automotive, please contact a company representative for further information.

FX16 Series●0.5mm pitch, Next Generation High Speed Wire-to-Board Connectors Product Speciﬁ cations Ratings Current Rating 0.5A Voltage Rating AC60V Operating Temperature Range : -55 to 85ˆ (Note 1) (Note 2) Operating Humidity Range : relative humidity of no more than 85% (Note 2) (Note 4) Storage Temperature Range : -10 to 60ˆ (Note 3) Operating Humidity Range : relative humidity of no more than 70% (Note 3) (Note 4) Items Speciﬁ cations Conditions 1.Contact resistance 80mø max (Note 5) Measured at 1mA 2.Insulation resistance 500Mø minimum Measured at DC 100V 3.Withstand voltage No ﬂ ashover or breakdown AC 200V is applied for 1 minute 4.Overall push-pull force Inserting force (0.5 × number of pos.) : no more than 1N Extracting force (0.05 × number of pos.) : no less than 1N Measured by using applicable connectors 5.Durability Contact resistance : variation from the initial state : no more than 20mø 50 mating cycles 6. Vibration No electrical discontinuity of 1µ or greater Frequency 1055Hz, half amplitude 0.75mm, 2 hours for 3 axial directions 7.Shock No electrical discontinuity of 1µ or greater Accelerated velocity : 490m/s , for 11ms, half-sine in 3 directions, 3 times for each of the three directions (axes) 8. Humidity resistance Contact resistance : variation from the initial state : 20mø max Insulation resistance : minimum of 500Mø 96 hours at 40ç temperature and the humidity range from 90 to 95% 9. Temperature cycles Contact resistance : variation from the initial state : 20mø max Insulation resistance : 500Mø min Temperature : -55ˠ5 to 35 ˠ85 ˠ5 to 35ç 5 cycles of the testing time period of 30 ˠ5 ˠ30 ˠ5 minutes Note 1 : Includes temperature rise caused by current ﬂ ow. Note 2 : The operating temperature range when the operating humidity is above 80% shall be -55 to 40ç. Note 3 : The term “storage” refers to the long-term storage condition of unused products before PCB mounting. Note 4 : No condensation allowed. Note 5 : The conductor resistance of connected cables is not included. Materials / Finish Receptacle Part Materials Finish Remarks Insulator FX16 : LCP resin FX16M2 : Polyamide resin Black color UL94V-0 Plug Part Materials Finish Remarks Insulator FX16-SD/SDL : Polyamide resin FX16F-HC : PC resin FX16M2-HC : PBT resin FX16-SD/SDL : Beige color FX16F-HC : Black color FX16M2-HC : Black color UL94V-0 Contact (FX16-SD/SDL only) Copper alloy Contact interface area : gold plating Shell FX16-SD/SDL : Stainless steel FX16F-HC : Stainless steel FX16M2-HC : Copper alloy FX16-SD/SDL : Nickel plating FX16F-HC : Nickel plating FX16M2-HC : Pure tin-plating Accessories Part Materials Finish Remarks

FX16 Series●0.5mm pitch, Next Generation High Speed Wire-to-Board Connectors Product Number Structure Refer to the chart below when determining the product specifications from the product number. Please select from the product numbers listed in this catalog when placing orders. Receptacle FX 16 M2 - 51 S - 0.5 SH (**) Plug FX 16 M2 - 51 P - HC Accessories (Cover shell) FX 16 - 31 P - GND Series Name : FX Series No. : 16 Shape designation None/F/M2 : Hirose control identiﬁ cation code Number of positions Contact type S : female contact P : male contact Contact pitch 0.5 : 0.5mm pitch None : No contact Product type (Receptacle) SH : right-angle type SV : vertical type Product type(Plug) SD : Right-angle batch cable assembly type (Micro coaxial cable) SDL : Vertical batch cable assembly type (Micro coaxial cable) HC : FFC holder type Product type (Accessories) GND : Right-angle type cover for micro coaxial cables GNDL : Vertical type cover for micro coaxial cables Packaging None : embossed tape package (1,000pcs/reel) (30) : embossed tape package (100pcs/reel)

FX16 Series●0.5mm pitch, Next Generation High Speed Wire-to-Board Connectors Transmission properties Differential impedance [Rise time: Tr=100ps] A differential impedance of 100ø ±10% is maintained at signal rise time of 100ps. ( ˞Notes), This specification is met by way of an impedance-matching design based on SI simulation. Eye diagram The FX16 Series connector shows outstanding performance at 3.75Gbps, the maximum speed of V-By-One ® HS developed by Thine Electronics, Inc. Testing with actual V-by-One® HS signals shows that the eye pattern is wide open at these signal speeds. (˞Notes) [Micro coax cable harness product] [Shielded FFC type harness product] * V-by-One HS is a trade mark of Thine Electronics, Inc. (ø) 120 110 100 (ø) 120 110 100 93.6ø 95.2ø PCB+SMA PCB+SMAFX16 FX16 Cable Cable [Micro coax cable harness 500mm product] [Shielded FFC type harness 500mm product] Eye Mask Eye Mask *Note) Results may vary depending on the length and properties of the cables used.

FX16 Series●0.5mm pitch, Next Generation High Speed Wire-to-Board Connectors Diagram of FX16 Series variations and mating table Micro coax cable assembly Ground Plate for micro coax cables (FX16-P-GND) Right-angle batch cable assembly type (FX16-P-0.5SD) Right-angle type (FX16-S-0.5SH) FFC cable Assembly Vertical type (FX16-S-0.5SV) FFC holder type assembly FFC holder type (FX16-P-HC) Right-angle type (FX16M2-S-0.5SH) Micro coax cable assembly Ground plate for micro coax cables (FX16-P-GNDL) Vertical batch cable assembly type (FX16-P-0.5SDL) Vertical type (FX16M2-S-0.5SV) FFC batch assembly type FFC holder type assembly FFC holder type (FX16M2P-HC) Receptacle Plug Additional Components Cable Assemblies

FX16 Series●0.5mm pitch, Next Generation High Speed Wire-to-Board Connectors FX16 Series mating dimensions (Reference dimensions) Right-angle type micro coaxial cable harness (FX16P-SD) Holder FFC type assembly (FX16-P-HC) Vertical type micro coaxial cable harness (FX16-P-SDL) Holder FFC type assembly (FX16M2--P-HC) Right-angle, PCB mount type (FX16-S-0.5SH) Vertical, PCB mount type (FX16-S-0.5SV) Right-angle, PCB mount type (FX16M2-S-0.5SH) Vertical, PCB mount type (FX16M2-S-0.5SV) Receptacle Plug Mated condition (14.6) (9.95) (8) (16.5) (14.85) (10.2) (16.75) (Unit : mm)

FX16 Series●0.5mm pitch, Next Generation High Speed Wire-to-Board Connectors Receptacle Right-angle type (FX16-S-0.5SH) Unit : mm Part No. HRS No. No. of Contacts (n) A B C D E F G H J K RoHS FX16-21S-0.5SH() 575-3411-5 ** 21 22.85 16 10 4 ----- 1 0 20.46 10 19.75 4 (00) : Embossed package (1,000pcs/reel), (30) : Embossed package (100pcs/reel) Notes:

1 The co-planarity of the contact and shell of this

product is 0.1mm max.

2 Insulation measures such as the pattern prohibited

area or resist processing are required in the area identiﬁ ed by ɹɹɹɹ inside the land pattern. 3 ( ) is a reference dimension.

4 During the manufacturing process, products may

incur some minor cosmetic damage (dents/ scratches), but this will not affect their performance.

5 This product is delivered in an embossed reel

packaging; the packaged quantity for one reel is 1,000 pieces for standard articles (00) and 100 pieces for the speciﬁ cation of (30). Right-angle type (FX16M2-**S-0.5SH) Recommended PCB layout (Metal mask dimension) ̙ʶ̌ɽ̎ Product lot No. Polarity mark ʢ̑ɽ̔ʣ ̐ɽ̐ʶ̌ɽ̏ 4-̌ɽ̑ʶ̌ɽ̍ ̛ʶ̌ɽ̎ ̥ʹ̚ʶ̌ɽ̍ ̖ʶ̌ɽ̏ ̍ɽ̑ʶ̌ɽ̍ ̜ʶ̌ɽ̏ ̥ʹ̌ɽ5ʶ̌ɽ1 ̝ʶ̌ɽ̍̑ ̐ɽ̔ʶ̌ɽ̎ ̥ʹ̌ɽ5ʶ̌ɽ1 ̘ʶ̌ɽ̍̑ ̗ʶ̌ɽ̎ ̎ɽ̍ʶ̌ɽ̎ Signal contactɿʢ̌ɽ̑ʣ Shellɿʢ̌ɽ̓ʣ Signal contact:ʢ0.5ʣ Shell:ʢ0.7ʣ Polarity mark No.nNo.1 Product lot No. ʢ0.6ʣ ʢ5.8ʣ ̘ʶ0.15 ̗ʶ0.2 ̖ʶ0.3 1.5ʶ0.1 1.5ʶ0.1 2.1ʶ0.2 4.8ʶ0.2 5.55ʶ0.20.25ʶ0.15 P=0.5ʶ0.1 ̝ʶ0.15 ̜ʶ0.3 4.4ʶ0.3 ʢ1.05ʣʢ1.05ʣ ̙ʶ̌ɽ̌̑ Pattern prohibited area ̘ʶ̌ɽ̌̑ ̗ʶ̌ɽ̌̑ ̟ʶ̌ɽ̌̑ ̛ʶ̌ɽ̌̑

FX16 Series●0.5mm pitch, Next Generation High Speed Wire-to-Board Connectors Vertical type (FX16-S-0.5SV) Unit : mm Part No. HRS No. No. of Contacts (n) A B C D E F G RoHS FX16-21S-0.5SV() 575-3401-1 21 20.46 10 4 - 10 16 4 ˓FX16-31S-0.5SV() 575-3402-4 31 25.46 15 - 4 12 21 FX16M2-41S-0.5SV() 575-3002-6 ** 41 30.46 20 - 20 26 6 (00) : Embossed package (1,000pcs/reel), (30) : Embossed package (100pcs/reel) Notes :

1 The co-planarity of the contact and shell should

measure no more than 0.1 (mm).

2 Insulation measures such as the pattern

prohibited area or resist processing are required in the area identified by ɹɹɹɹ inside the land pattern. 3 ( ) is a reference dimension.

4 During the manufacturing process, products

may incur some minor cosmetic damage (dents/scratches), but this will not affect their performance.

5 This product is delivered in an embossed

package; the packaged quantity in one reel is 1,000 pieces for standard articles (00) and 100 pieces for the speciﬁ cation of (30). Vertical type (FX16M2-**S-0.5SV) Recommended PCB layout (Metal mask dimension) No.1 No.n Lot No. (side face)Polarity mark (side face) Signal contactɿʢ0.7ʣ Shellɿʢ0.5ʣ 5.5ʶ0.3 4.7ʶ0.2 Aʶ0.3 5.3ʶ0.3 P=0.5ʶ0.1 Bʶ0.2 n-0.18ʶ0.05 1.5ʶ0.1 Fʶ0.2 P=Dʶ0.1 6-0.5ʶ0.1 Eʶ0.2 ̘ʶ̌ɽ̌̑ ̗ʶ̌ɽ̌̑ ̛ʶ̌ɽ̌̑ ̛ʶ̌ɽ̌̑ ̚ʶ̌ɽ̌̑ Pattern prohibition area n-0.22ʶ0.03(Metal mask) n-0.25ʶ0.03(Land pattern) Signal contact:ʢ0.7ʣ Shellɿʢ0.5ʣ ̐ɽ̎ʶ̌ɽ̎ 4-̌ɽ̑ʶ̌ɽ̍ ̍ɽ̑ʶ̌ɽ̍ ̑ɽ̑ʶ̌ɽ̏ ̑ɽ̏ʶ̌ɽ̏ ̛ʶ̌ɽ̎ ̚ʶ̌ɽ̎ ̘ʶ̌ɽ̎ ̖ʶ̌ɽ̏ ̗ʶ̌ɽ̎ Lot No. Polarity mark

FX16 Series●0.5mm pitch, Next Generation High Speed Wire-to-Board Connectors Emboss carrier dimensions (receptacles only) Horizontal type (FX16-S-0.5SH / FX16M2-S-0.5SH) Unit : mm Part No. HRS No. No. of Contacts (n) ABCD W (00) : Embossed package (1,000pcs/reel), (30) : Embossed package (100pcs/reel) ʢ̏ɽ̒̑ʣ П̍ɽ̑ ʴ̌ɽ̍ ɹ̌ ʢ̌ɽ̑ʣ ʢ̒ɽ̓ʣ ʢ̙ʣ ̘ʶ̌ɽ̍ ̗ʶ̌ɽ̍ ̖ʶ̌ɽ̏ ʢ̔ɽ̐ʣ П̍̏ʶ̌ɽ П̎̍ʶ ̌ɽ̔ ʢ̍ɽ̒ʣ П̏̔̌ʶ̎ П̔̌ʶ̎ ʢ̬ʣ Reel Dimensions Unreeling direction ʢ̍ɽ̒ʣ П̏̔̌ʶ̎ П̔̌ʶ̎ ʢ̬ʣ Reel Dimensions П̍ɽ̑ ʴ̌ɽ̍ Unreeling direction ʢEʣ ʢ0.5ʣ ʢ7ʣ ʢ̙ʣ ʢ10ʣ 1.5 ʴ0.1 ̖ʶ0.3 1.7 ʴ0.15 2ʶ0.15 P=4ʶ0.1 P=12ʶ0.1 ̗ʶ0.1 ̘ʶ0.1 ʢ5ʣ П13 ʶ 0.5 П21ʶ0.8 Vertical type (FX16-S-0.5SV / FX16M2-S-0.5SV) Unit : mm Part No. HRS No. No. of Contacts (n) ABCDE W 44 40.4 20.2 (00) : Embossed package (1,000pcs/reel), (30) : Embossed package (100pcs/reel) Note 1 : ( ) shows a reference dimension. Note 1 : ( ) shows a reference dimension.

FX16 Series●0.5mm pitch, Next Generation High Speed Wire-to-Board Connectors Recommended Temperature Proﬁ le This temperature profile is a reference based on the following conditions. Since your actual conditions may vary, please check your process before mounting the connectors. (Applicable Conditions) Test PCB Dimensions : 40×30×1 mm Reflow method Material : glass epoxy Solder Composition : Sn-3 Ag-0.5 Cn (flux component : 10.5wt%) Metal mask thickness : 0.12mm Note 1 : This temperature profile is a recommended value. Note 2 : The reflow process should not be conducted more than two times. Note 3 : The values may show a slight variance due to solder paste type and thickness. Cleaning Conditions Cleaning with organic solvents Solvent Clean at normal temperature Heated cleaning IPA (Isopropyl alcohol) ˓˓ Water cleaning If wet cleaning is necessary, please select the proper cleaning agent (terpene, alkali saponification agent etc.) based on the reaction it will have on the metals and resins of the connector. This information is issued by the manufacturer of the cleaning agent. Additionally, please make sure not to apply an excessive amount of the cleaning agent. Points to note during cleaning When using organic solvents or wet cleaning agents, please ensure proper rinsing is done to eliminate the possibility of deterioration in electrical performance caused by flux or cleaning agents remaining in the connector. (Peak temperature : MAX250ç) Time (sec) 30 ±10 seconds Soldering time (minimum of 230°C) 90 ±30 seconds Pre-heating time(150~180ç) ˆ ˆ ˆ Connector surface temperature(ç)

FX16 Series●0.5mm pitch, Next Generation High Speed Wire-to-Board Connectors Plug Right-angle batch cable assembly type Unit : mm Part No. HRS No. No. of Contacts (n) A B C D RoHS Notes : 1. ( ) shows a reference dimension. 2. During the manufacturing process, products may incur some minor cosmetic damage (dents/scratches) or black spots in the resin, but these small imperfections will not affect their performance. 3. This product is delivered in a tray package. Right-angle-type cover shell for micro axial cables Unit : mm Part No. HRS No. No. of Contacts (n) A B C RoHS ̘ʶ̌ɽ̍̑ ʵ̌ɽ̍̑ ʴ̌ɽ̖̍ ̗+0.2 -0.1 ̎ɽ̔ʶ̌ɽ̍ ̙ʶ̌ɽ̍ ̏ɽ̑ʶ̌ɽ̏ ̘ʶ̌ɽ̍̑ ̗ʶ̌ɽ̏ ʢ̖ʣ ʢ̍̏ɽ̏ʣ ʢ̍ɽ̒ʣ ʢ̑ɽ̍̑ʣ ʢ̓ɽ6ʣ ʢ̍̌ɽ̕ʣ ʢ̚ʣ ʢ̛ʣ Notes : 1. During the manufacturing process, products may incur some minor cosmetic damage (dents/scratches), but this will not affect their performance. 2. This product is delivered packaged on a 2500pcs/reel. 3. This product is an accessory to the separately sold item "Right angle batch cable connection type plug (FX16-**P-0.5SD)". Please be sure to use them together.

FX16 Series●0.5mm pitch, Next Generation High Speed Wire-to-Board Connectors Vertical batch cable connection type Unit : mm Part No. HRS No. No. of Contacts (n) A B C D E F RoHS Notes : 1. ( ) shows a reference dimension. 2. During the manufacturing process, products may incur some minor cosmetic damage (dents/scratches) or black spots in the resin, but these small imperfections will not affect their performance. 3. This product is delivered in a tray package. Vertical type cover shell for micro coaxial cables Unit : mm Part No. HRS No. No. of Contacts (n) A B C RoHS 1.3ʶ0.15 2.05ʶ0.15 ̖ʶ0.2 ̘ʶ0.15 9ʶ0.15 ̗ʶ0.2 No.n No.1 ʢ8.65ʣ ʢ4.9ʣ ʢ1.6ʣ ʢ̗ʣ ʢ̘ʣ ʢ9.6ʣ 2.8ʶ0.1 ʢ6.55ʣ 2.4ʶ0.3 ʢ̚ʣ ̛ʶ0.15 ̖ʶ0.3 ̖ʶ0.3 ̙ʶ0.1 P=0.5ʶ0.08 Notes : 1. During the manufacturing process, products may incur some minor cosmetic damage (dents/scratches), but this will not affect their performance. 2. This product is delivered packaged on a 2000pcs/reel. 3. This product is a compliment to the separately sold item "vertical batch cable assembly type plug (FX16-**P-0.5SDL)". Please be sure to use them together.

FX16 Series●0.5mm pitch, Next Generation High Speed Wire-to-Board Connectors Notes : 1 ( ) shows a reference dimension.

2 Pulse heat batch soldering is recommended to afﬁ x the harness to the connector

3 To prevent any conductor deformation prior to harnessing, please use the cable material immediately after cutting 4 After conﬁ rming that the soldered state has no problems, departure from recommended values is permissible 5 Use of out-of-spec dimension cables may hinder the correct attachment to the connector. Additionally, use of excessive force during cable connection may cause faults such as unsoldered areas and disconnects. 6 The protrusion of the external conductor from the metal bar should be minimized. 7 Apply a solder coat (pre-tinning) on the internal conductor. 8 Shows the position at which the connector should be connected and the cable inserted into the connector when the cable has been stripped at the recommended length. If cable is stripped at a different length, the amount of cable insertion will need to be changed as well. Applicable wires Micro coaxial cables Applicable conductor size (core structure) Insulation diameter 36 AWG# (7pcs/0.05mm) Ø0.3~Ø0.5mm38 AWG# (7pcs/0.04mm) 40 AWG# (7pcs/0.03mm) Selected cable material Marginal cable length cutting position AWG #36, 38, 40 micro axial cables Solder coat Metal bar Jacket External conductor Dielectric Internal conductor ̍ ̢̞̣ ̖ʶ̌ɽ̎ ʵ̌ɽ̎ ʴ̌ɽ̌̑̍ ̌ɽ̒ʶ̌ɽ̍ ʵ̌ɽ̍ ̎ɽ̍ ̗ʶ̌ɽ̍̑ ʢ̘ʣ Recommended micro coaxial cable dimensions No. of Contacts (n) Applicable connectors A B C 21 FX16-21P-0.5SD 13.1 10 4.55 FX16-21P-0.5SDL 4.3 31 FX16-31P-0.5SD 18.1 15 4.55 FX16-31P-0.5SDL 4.3

FX16 Series●0.5mm pitch, Next Generation High Speed Wire-to-Board Connectors FFC holder type (FX16F-P-HC) Unit : mm Part No. HRS No. No. of Contacts (n) A B C RoHS Notes : 1. ( ) shows a reference dimension. 2. During the manufacturing process, products may incur some minor cosmetic damage (dents/scratches). But this will not affect their performance. Additionally there may be mold sinks present. 3. This product is delivered in a tray package. FFC holder type (FX16M2-P-HC) Unit : mm Part No. HRS No. No. of Contacts (n) A B RoHS FX16M2-41P-HC 575-3262-7 41 35.4 27.57 ˓FX16M2-51P-HC 575-3263-0 51 40.4 32.57 15ʶ0.3 11.2ʶ0.3 ʢ̖ʣ ̗ʶ0.15 3.5ʶ0.3ʢ6.45ʣ 1.65ʶ0.2 ʢ3.2ʣʢ4ʣ 3.7ʶ0.3 2.8ʶ0.1 8.7ʶ0.3 ̘ʶ0.3 ̖ʶ0.3 ̗ʶ0.15 Notes : 1. ( ) shows a reference dimension. 2. During the manufacturing process, products may incur some minor cosmetic damage (dents/scratches), but this will not affect their performance. Additionally there may be mold sinks present. 3. This product is delivered in a tray package.

FX16 Series●0.5mm pitch, Next Generation High Speed Wire-to-Board Connectors Notes : 1 The plating on the ground plate (tape) must be at least 1.5µm of Sn plating, with the ﬁ rst 1 to 5µm of Ni plating + at least 0.2µ of Au plating on the pad surface as well as C-2000-equivalent sealing. 2 ɹɹɹɹ denotes the shielded area. (both sides are shielded). 3 ɹɹɹɹ denotes the area for the ground plate (conductive tape). 4 ɹɹɹɹ denotes the area for the reinforcing ﬁ lm. 5 The width of the conductor must be 0.3 ±0.03mm. 6 The ground plate (tape) and shield must overlap each other. This will allow a conductive path to be established through bot h ground plates and on both sides. 7 FFC must be made to satisfy the differential impedance value of 100ø ±7%. 8 ( ) denotes the reference dimension and ◆ mark denotes important dimensions. 9 The L dimension is the length of the harness from one end face to the other end face of the connector cable port. Applicable wires Completely shielded FFC for holder type Unit : mm No. of Contacts (n) Applicable connectors A B C D E F Enlarged view 4 16 2 Connector cut-off positionʢ̸̢̽ ̓ɽ̼̼̍ʣ ʢL+14.4ʣʴ3 9.2ʴ2 6.2ʴ0.1 1.4ʶ0.051.4ʶ0.05 3.5ʶ0.5 10.7ʶ1 2.3ʶ0.05 ˗3.8 0 ʵ0.06 ˗̗ʶ0.05 ̖ʶ0.1 ̘ʶ0.05 ̙ʶ0.05 P=0.5ʶ0.03 0.3ʶ0.03 ̚ʶ0.05 ʢ7.2ʣ 6.05ʴ1.05 ʵ0.7 ʢ0.7ʣ 0.85 max Fʶ0.4 R0.2 max R0.2 max R0.2 ma x R0.2 max ʢ̌ɽ̍̎ʣ ˗̌ɽ̐̑ʶ̌ɽ̌̏ Reinforcing film Ground plate (conductive tape) Insulator (polyester) Insulator (polyester) Conductor (gold-plated annealed copper foil) FX16F-P-HC The length of the harness when the harness is used for both sides. FX16F-P-HC Recommended FFC dimensions Enlarged view

FX16 Series●0.5mm pitch, Next Generation High Speed Wire-to-Board Connectors Notes : 1 The plating on the grounding plate (tape) must be at least 1.5µm of Sn plating, with the ﬁ rst 1 to 5µm of Ni plating + at least 0.2µ of Au plating on the pad surface as well as C-2000-equivalent sealing. 2 ɹɹɹɹ denotes the shielded area. (both sides are shielded). 3 ɹɹɹɹ denotes the area for the ground plate (conductive tape). 4 ɹɹɹɹ denotes the area for the reinforcing ﬁ lm. 5 The width of the conductor must be 0.3 ±0.03mm. 6 The ground plate (tape) and shield must overlap each other. This will allow a conductive path to be established through bot h ground plates and on both sides. The manufacturing work should be directed to ensure that the FFC is made to satisfy a differential impedance value of 100ø ±7%. 8 ( ) denotes the reference dimension and ◆ mark denotes important dimensions. 9 Warpage of the reinforcing ﬁ lm is permitted only in the direction of OK in reference to ˛ ␿ ˛ on both sides. However, please make sure that the ﬁ lm can still be inserted into the connector without any problems. Completely shielded FFC for holder type Unit : mm No. of Contacts (n) Applicable connectors A B C D E F 41 FX16M2-41P-HC 24.4 23 21.2 20 23.5 20.7 51 FX16M2-51P-HC 29.4 28 26.2 25 28.5 25.7 Reinforcing film Warpage provision9 Conductor (gold-plated annealed copper foil) Insulator (polyester) Insulator (polyester) Ground plate (conductive tape) Reinforcing film ˗0.45ʶ0.03 0.33ʶ0.03 ˗0.3ʶ0.03 0.035ʶ0.01̑ FX16M2-P-HCFX16M2-P-HC ʢ13.15ʣ L 0 ʢ13.15ʣ ʢL+26.3ʣ+3 Harness lengths and tolerance for double-ended assemblies 1 34 Enlarged view Connector cut-off position(NIN 13.12mm) ̖ ̢̖̭ ̚ʶ0.1 ʢ0.7ʣ

0.85 MAX

1.5ʶ0.051.5ʶ0.05 4ʶ0.5 ʢ13.15ʣ 11+0.5 ˗̗ʶ0.05 ˗6.5 0 ʵ0.06 9.1ʴ0.1 02.5ʶ0.5 10.5ʴ20 ʢ̡ʴ26.3ʣ 0.3ʶ0.03 Pʹ0.5ʶ0.03 ̙ʶ0.05 ̘ʶ0.05 ʴ0.4 ʢ12ʣ C 0.5 R0.2 MAX R0.2 MAX R0.2 MAX Recommended FFC dimensions Enlarged view

FX16 Series●0.5mm pitch, Next Generation High Speed Wire-to-Board Connectors Plug (Vertical/horizontal batch cable connection type) [Precautions for soldering] [1] Recommended soldering iron Wire solder with flux (lead-free type: Sn-3Au-0.5Cu) When using micro coax cables……Ø0.15 Length : number of pos. ×0.5mm Be careful not use an excessive amount of flux, especially when using a wire solder that contains flux. Doing so may cause the flux to run up to the contact portion which can lead to contact failure. [2] Prior to fixing the cables to the connector, make sure that the conductor is placed correctly in the center of the contact. Fix the cable at the metal bar guide on the connector. [3] Before you solder down the cables onto the connector, please check for the following issues : ɾDeformation of the conductor ɾPitch deviations to the conductor relative to the contact ɾExtreme uplift of the conductor tip end This feature can lead to unsoldered spaces or solder bridges. [4] Recommended pulse heat conditions Conditions will vary depending on the length/type of cable used, type of solder, etc… Please reference the recommended profile conditions when setting up your working conditions. Pressure on the iron tip 13-17N Main heating Temperature (Y) 275±5 ˆ Hold time (X) 2 ±0.5 seconds [5] Please check the soldered part after soldering to ensure no deformities were made. The illustrations below depict some examples of correct parts and some examples of incorrectly soldered parts. ̮ ˆ ̭ ͂̎͂ Time to apply pressure on the iron tip ̎͂̎͂ ̎̎̌ˆIdling Main heating Preheating̎̎̌ˆ ̑̌ˆ Precautions of use Example of a correctly soldered part Examples of incorrectly soldered parts Solder bridge Insufﬁ cient amount of solder used Scattered solder balls Floating Uplift of the conductor The conductor is located too close to the extended contact. The conductor is located at the center of the contact, and the whole area is uniformly soldered. Deformation of the conductor Pitch deviation Uplift

FX16 Series●0.5mm pitch, Next Generation High Speed Wire-to-Board Connectors [Precautions for resin sealing] [1] To prevent insulation failure due to foreign materials, cable disconnection during the routing of the cable and other failures, we recommend that the soldered area be protected with an ultraviolet curable resin or another equivalent material. Recommended resin sealing material : Ultraviolet curable resin 3033 manufactured by ThreeBond Co., Ltd. [2] Please refer to the resin manufacturer’s directions for recommended usage conditions. [3] Ensure that the complete soldering area of the conductor is covered with resin. Be careful not to let the applied resin flow into or stick to the connector contacts. [4] Please pay close attention to the load (e.g. tension, stress.) placed on the soldered part after soldering. Poor handling could cause cable disconnection. [How to mount the cover shell] [1] After connecting the cables, mount the separately sold cover shell (for micro coax cables : FX16-31P-GND). [2] Place the cover shell over the connector from above, set it on the connector while holding it with your fingers. [3] After applying it to the connector, check to see if all six "joining point" locations are correctly in place. Precautions of use (0.65)(16.5) (2.7) (1) Cover shell qPrepare the cover shell. wPlace it horizontally on the connector from above. eSet it on the connector and pinch it down Pinch together Pinch together Joining point Joining point Joining point Joining point Joining point Joining point OK NG Illustration showing proper joining (cross-section of the joining point). The cover shell is locked into place and is seated correctly. The cover shell is not locked and is still incomplete.

FX16 Series●0.5mm pitch, Next Generation High Speed Wire-to-Board Connectors [Ground soldering of the connector to the cable] [1] Soldering the metal bar of the cable and the connector shell will enhance the shielding properties and provide additional cable strain relief. ɹɹɹɹ [2] Do not apply too much solder as this can lead to deformation/melting of the cable/connector due to the heat generated while soldering. Plug (FFC holder type) [Precautions during harness work] [1] Inserting FFC Insert the FFC straight along the guide rib of the mold, as shown in the following figure. It cannot be inserted in different directions. Please be careful not to deform FFC or damage the case or spring contact. [2] Confirming the insertion of the FFC Check if the FFC has been inserted correctly by observing the tip end of the FFC from above the connector. * If the FFC was inserted correctly, the tip of the FFC will meet up with the wall of the connector. Precautions of use Spring contact Conductor portion FFC Molded guide rib Connector (FX16M2-**P-HC) Soldered part Soldered part FFC has been completely inserted. Check the tip end of the FFC by observing it from above the connector as shown in the ﬁ gure on the left. Check to see if the FFC edge meets the wall of the connector.If the end of the FFC does not meet the wall of the connector *Re-insert it until they meet evenly with each other. Wall of the connector Wall of the connector

FX16 Series●0.5mm pitch, Next Generation High Speed Wire-to-Board Connectors [3] Fixing the FFC As shown in the figure below, hold the connector in both hands and push the lock straight with both thumbs. At this time, verify the hooks are tightly attached to each other on both sides. Additionally, after closing the lock, verify that the FFC cannot be easily pulled out, and that the hooks on both sides are tightly attached to each other by holding both ends of the assembly and pulling the FFC in the drawing direction with a force of 3 to 5 N [4] Other cautions q From the time of opening the package until the assembly process, please do not handle the product in the manner which will cause the lock of the connector to be pushed down. If the lock gets deflected it in the direction shown in the figure below, discard the connector. w Once FFC has been removed from the connector, do not reuse the connector. eAt the time of packing the harness, be careful not to let the connector be damaged or deformed. Precautions of use Hinges (at 4 places) Left side Left side Right side Check to see that the FFC cannot be pulled out with a force of 3 to 5 N. Check to see that the hooks on both sides are tightly attached to each other. Right side

FX16 Series●0.5mm pitch, Next Generation High Speed Wire-to-Board Connectors General cautions [Cautions for handling] [1] Insertion into the connector on the side of PCB The mating direction of this connector has been specified. Mating should be done with the mark facing the direction shown in the figure below. Additionally, insertion should be done until the locks on both sides are set. Although this connector is designed to prevent reverse insertion, the connector could be damaged if it were mated forcibly with a force exceeding 25 N. Avoid forced mating, and please verify the triangle mark position before mating. Do not pull it out at an angle as shown in the figure below. This could damage the connector. [2] Unmating the connector mounted on a PCB This connector is structured to lock on both ends when mated. When unmating the connector, pull it out straight while pushing on both sides with your fingers to unlock it. Please do not pull out FFC with a strong force. ɹɹ Do not pull it out at an angle as shown in the figure below. This could damage the connector. ʪIncorrect insertion methodʫ Precautions of use PCB side: FX16M2-**S-0.5SH Mating When inserting it, do not touch the button of the plug, and hold this face to insert it. Pull-out Pull-out wPull it out straight. ePull it out straight while pushing in the buttons. ᶃ Push it. ᶃ Push it. Triangle mark

FX16 Series●0.5mm pitch, Next Generation High Speed Wire-to-Board Connectors ʪIncorrect pull-out methodʫ [3] In the case when the connector has been unmated forcibly. If the connector has been unmated forcibly, push it back once to the completely mated condition, from this state, pull the plug by the "correct pull- out method". [4] In the case when you have pulled it out with one side locked If the plug has been pulled out with one side locked, the locked part could be damaged if you pull it out forcibly. In such a situation, do not try to unlock it forcibly, but mate the plug again as it is, and pull out the plug by the "correct pull-out method" again with both sides locked. [5] Handling after mating After mating, be careful not to apply load to the connector during cable routing. The connector could be damaged if you pull the cable with a force of 20 N or more. Additionally, it could cause cable disconnection. Please make sure that you do not pull the cable forcibly. Repeated strain could also cause cable disconnection. Avoid any use which involves repeated strain. When you use a cable that is folded back from the connector base, please maintain a large bend radius or keep the folding position away from the connector base in order minimize the load on the connector. Precautions of use Be sure to push it once to the completely mated condition. If the plug has been pulled out with one side locked, be sure to mate them again. Repeated tension Using the cable in a folded state. Allow for a large bend radius. Keep the folding position away from the connector base.

FX16 Series●0.5mm pitch, Next Generation High Speed Wire-to-Board Connectors MEMOɿ

FX16 Series●0.5mm pitch, Next Generation High Speed Wire-to-Board Connectors The characteristics and the specifications contained herein are for reference purpose. Please refer to the latest customer drawings prior to use. The contents of this catalog are current as of date of 02/2018. Contents are subject to change without notice for the purpose of improvements. 2-6-3,Nakagawa Chuoh,Tsuzuki-Ku,Yokohama-Shi 224-8540,JAPAN TEL: +81-45-620-3526 Fax: +81-45-591-3726 http://www.hirose.com http://www.hirose-connectors.com USA: HIROSE ELECTRIC (U.S.A.), INC. SAN JOSE OFFICE

2841 Junction Ave, Suite 200

San Jose, CA. 95134 Phone : +1-408-253-9640 Fax : +1-408-253-9641 http://www.hirose.com/us/ USA: HIROSE ELECTRIC (U.S.A.), INC. DETROIT OFFICE (AUTOMOTIVE) 17197 N. Laurel Park Drive, Suite 253, Livonia, MI 48152 Phone : +1-734-542-9963 Fax : +1-734-542-9964 http://www.hirose.com/us/ USA: HIROSE ELECTRIC (U.S.A.), INC. BOSTON OFFICE

300 Brickstone Square Suite 201,

Andover, MA 01810 Phone : +1-978-662-5255 USA: HIROSE ELECTRIC (U.S.A.), INC. HEADQUARTERS CHICAGO OFFICE

2300 Warrenville Road, Suite 150,

Downers Grove, IL 60515 Phone : +1-630-282-6700 http://www.hirose.com/us/ CHINA: HIROSE ELECTRIC TECHNOLOGIES (SHENZHEN) CO., LTD. Room 09-13, 19/F, Office Tower Shun Hing Square, Di Wang Commercial Centre,

5002 Shen Nan Dong Road, Shenzhen City, Guangdong Province, 518008

Phone : +86-755-8207-0851 Fax : +86-755-8207-0873 http://www.hirose.com/cn/ KOREA: HIROSE KOREA CO.,LTD. 143, Gongdan 1-daero, Siheung-si, Gyeonggi-do, 15084, Korea Phone : +82-31-496-7000 Fax : +82-31-496-7100 http://www.hirose.co.kr/ GERMANY: HIROSE ELECTRIC EUROPE B.V. NUREMBERG OFFICE Neumeyerstrasse 22-26, 90411 Nurnberg Phone : +49-911 32 68 89 63 Fax : +49-911 32 68 89 69 http://www.hirose.com/eu/ GERMANY: HIROSE ELECTRIC EUROPE B.V. HANOVER OFFICE Bayernstr. 3, Haus C 30855 Langenhagen, Germany Phone : +49-511 97 82 61 30 Fax : +49-511 97 82 61 35 http://www.hirose.com/eu/ GERMANY: HIROSE ELECTRIC EUROPE B.V. GERMAN BRANCH Schoenbergstr. 20, 73760 ostfildern Phone : +49-711-456002-1 Fax : +49-711-456002-299 http://www.hirose.com/eu/ FRANCE: HIROSE ELECTRIC EUROPE B.V. PARIS OFFICE

130 Avenue Joseph Kessel, Bat E, 78960

Voisins le Bretonneux, France Phone : +33-1-85764886 Fax : +33-1-85764823 http://www.hirose.com/eu/ THE NETHERLANDS: HIROSE ELECTRIC EUROPE B.V. Hogehillweg #8 1101 CC Amsterdam Z-O Phone : +31-20-6557460 Fax : +31-20-6557469 http://www.hirose.com/eu/ UNITED KINGDOM: HIROSE ELECTRIC EUROPE BV (UK BRANCH)

4 Newton Court, Kelvin Drive, Knowlhill,

Milton Keynes, MK5 8NH Phone : +44-1908 202050 Fax : +44-1908 202058 http://www.hirose.com/eu/ CHINA: HIROSE ELECTRIC (SHANGHAI) CO., LTD. 18, Enterprise Center Tower 2, 209# Gong He Road, Jing’an District, Shanghai, CHINA 200070 Phone : +86-21-6391-3355 Fax : +86-21-6391-3335 http://www.hirose.com/cn/ CHINA: HIROSE ELECTRIC (SHANGHAI) CO.,LTD. BEIJING BRANCH A1001, Ocean International Center, Building 56# East 4th Ring Middle Road, ChaoYang District, Beijing, 100025 Phone : +86-10-5165-9332 Fax : +86-10-5908-1381 http://www.hirose.com/cn/ TAIWAN: HIROSE ELECTRIC TAIWAN CO., LTD. 103 8F, No.87, Zhengzhou Rd., Taipei Phone : +886-2-2555-7377 Fax : +886-2-2555-7355 http://www.hirose.com/tw/ HONG KONG: HIROSE ELECTRIC HONGKONG TRADING CO., LTD. Room 1001, West Wing, Tsim Sha Tsui Centre, 66 Mody Road, Tsim Sha Tsui East, Kowloon, Hong Kong Phone : +852-2803-5338 Fax : +852-2591-6560 http://www.hirose.com/hk/ INDIA: HIROSE ELECTRIC SINGAPORE PTE. LTD. DELHI LIAISON OFFICE Office NO.552, Regus-Green Bo ulevard, Level5, Tower C, Sec62, Plot B-9A, Block B, Noida, 201301, Uttar Pradesh, India Phone : +91-12-660-8018 Fax : +91-120-4804949 http://www.hirose.com/sg/ SINGAPORE: HIROSE ELECTRIC SINGAPORE PTE. LTD. 03, Anson Road, #20-01, Springleaf Tower, Singapore 079909 Phone : +65-6324-6113 Fax : +65-6324-6123 http://www.hirose.com/sg/ INDIA: HIROSE ELECTRIC SINGAPORE PTE. LTD. BANGALORE LIAISON OFFICE Unit No-403, 4th Floor, No-84, Barton Centre, Mahatma Gandhi (MG) Road, Bangalore 560 001, Karnataka, India Phone : +91-80-4120 1907 Fax : +91-80-4120 9908 http://www.hirose.com/sg/ MALAYSIA: PENANG REPRESENTATIVE OFFICE 73-3-1, Ideal@The One, Jalan Mahsuri, Bayan Lepas Penang, 11950, Malaysia Phone : +604-648-5536 http://www.hirose.com/sg/ THAILAND: BANGKOK OFFICE (REPRESENTATIVE OFFICE) Unit 4703, 47th FL., 1 Empire Tower, South Sathorn Road, Yannawa, Sathorn, Bangkok 10120 Thailand Phone : +66-2-686-1255 Fax : +66-2-686-3433 http://www.hirose.com/sg/ Powered by TCPDF (www.tcpdf.org)

Product Information

FX16M2-51P-HC specifications and overview.

Summary

0.5mm pitch, Next Generation High Speed Wire-to-Board Connectors

Description

0.5mm pitch, Next Generation High Speed Wire-to-Board Connectors

Source title FX16M2-51P-HC Datasheet(PDF) - Hirose Electric

Related Parts

More parts from the same family.

Browse manufacturer