FX15SC-51S-05SH

FX15S-51S HIROSE | Alldatasheet

Document overview

• Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
• PDF pages: 25

Technical content

1mm Pitch Cable-to-Board Connectors supporting LVDS signal FX15 Series Contacts consolidated into 1 row for equal length transmission lines Mating side: 1 mm pitch, staggered 2-row construction Termination side: 0.5 mm pitch, 1-row construction I Features 1. Space saving Reduction in space is achieved by designing the contacts in 2-row staggered 1 mm pitch on the mating side and on a single row 0.5 mm pitch on the termination side (Fig. 1). 2. Equal length transmission lines Contact configuration creates equal length transmission lines preventing deterioration of LVDS signal within the connector (Fig.1). 3. Different types Availability of types with or without metal shields allows flexibility of applications and cost reduction. 4. Self alignment and self-guiding Built-in guide posts allow secure self-alignment within ±1.5 mm (Fig.2). 5. Secure and complete mating / unmating Side latch-locks assure and confirm complete and secure mating of plugs to receptacles while permitting ease of disconnection (Fig. 3). 6. Enhanced shielding effectiveness Availability of version with enlarged metal shields (preventing intrusion or emission of the electromagnetic interference) further protects the integrity of LVDS signal (FX15S series, Fig.4) 7. RoHS compliant All components and materials comply with the reqirements of EU Directive 2002/95/EC. I Applications FPD-TV, FPD panels and other applications requiring secure and reliable connection and transmission signal integrity. Space saving, Equal length transmission lines Patent pending -10 -20 -30 -40 -50 Frequency (GHz) With metal Without metal Emission Noise Level (dBm) High Shielding Effectiveness Fig.1 Self-alignment of ±1.5 mm Side latch -locks Large guide post 1.5mm1.5mm 1.5mm With metal shields (FX15 and FX15S Series) Without metal shields (FX15M Series) Fig.2 Fig.3 Fig.4 The product information in this catalog is for reference only. Please request the Engineering Drawing for the most current and accurate design information. All non-RoHS products have been discontinued, or will be discontinued soon. Please check the products status on the Hirose website RoHS search at www.hirose-connectors.com, or contact your Hirose sales representative.

FX15 SeriesG 1mm Pitch Cable-to-Board Connectors supporting LVDS signal 1 mA 100V DC 300V AC/one minute With corresponding connector 50 cycles Frequency: 10 to 55 Hz, single amplitude of 0.76mm, 2 hours, 3 axis Acceleration of 490m/s2, 11ms durations, sine half-wave waveform, 3 cycles, 3axis. 96 hours at 40ç, RH 90% to 95% Temperature : -55ç¡ +15ç to +35ç ¡ +85ç ¡ +15ç to +35ç Time : 30 ¡ 5 ¡ 30 ¡ 5 (Minutes) 5 cycles 5% water solution for 48 hours. 60 m ohms max. (Note 3) 500 M ohms min. No flashover or insulation breakdown. 0.2N min., 30N max. Contact resistance: 80 m ohms max.(Note 3) No electrical discontinuity of 1 µs or more. No electrical discontinuity of 1 µs or more. Contact resistance: 80 m ohms max. No damage, cracks, or parts dislocation.(Note 3) Contact resistance: 80 m ohms max. (Note 3) Insulation resistance: 500 M ohms min. Contact resistance: 80 m ohms max. (Note 3) No corrosions I Ordering information I Product Specifications Ratings Current rating Voltage rating 0.5A 100V AC Operating temperature range Storage temperature range -55ç to +80ç (Note 1) -10ç to +60ç (Note 2) 1. Contact resistance 2. Insulation resistance 3. Withstanding voltage 4. Insertion-Extraction force 5. Durability (mating/un-mating) 6. Vibration 7. Shock 8. Humidity 9. Temperature cycle 10. Salt spray Item Specification Conditions Note 1: Includes temperature rise caused by current flow. Note 2: The term “storage” refers to products stored for long period of time prior to mounting and use. Operating temperature r ange and humidity range covers non-conducting condition of installed connectors in storage, shipment or during transportation. Note 3: Includes wire conductor resistance (12mm long). Note 4: Information contained in this catalog represents general requirements for this Series. Contact us for the drawings and specifications for a specific part number shown. I Materials and Finishes G Receptacle UL94V-0 Material Finish RemarksComponent Insulator Contact Metal shields (with shields) Metal fittings (without shields) Polyamide Phosphor bronze FX15S : Nickel silver FX15SC : Stainless steel Phosphor bronze Color: Black Contact area: Gold plated Termination area: Tin plated FX15SC : Tin plated Selective gold flash plated UL94V-0 Material Finish RemarksComponent Insulator Contact Metal shields (with shields) Metal latch-locks (with shields) Metal shields, metal latch-looks (micro-coaxial cable) Polyamide Phosphor bronze Nickel silver Stainless steel Stainless steel Color: Black Contact area: Gold plated Termination area: Tin plated Nickel plated G Plug FX15 S -31 S - 0.5 SH 1 632 4 5 G Receptacle FX15 S - 31 P - C 1 32 4 7 G Plug FX15 - 3032 PCF B 1 2 98 10 G Crimp contact Series Name Configuration Number of contacts Connector type Contact pitch Housing configuration Termination Applicable conductor Packaging Plating (contact area) : FX15 Blank : With shields (or crimp contact) 15S : With shields – enhanced shielding 15SC : With shields – enhanced shielding (PCB mounting pattern : VESA standard) 15M : Without shields P : Male contact S : Female contact : 0.5 mm SH : Right angle SV : Straight C : Crimp 0.5SD : Micro-coaxial cable GND : Separate ground plate 2830 : AWG 28 to 30 3032 : AWG 30 to 32 PCF : Reel/ plug contact B : Gold plated The product information in this catalog is for reference only. Please request the Engineering Drawing for the most current and accurate design information. All non-RoHS products have been discontinued, or will be discontinued soon. Please check the products status on the Hirose website RoHS search at www.hirose-connectors.com, or contact your Hirose sales representative.

FX15 SeriesG 1mm Pitch Cable-to-Board Connectors supporting LVDS signal I FX15 Series – Mating Diagram Crimp contact Crimp contact (FX15-3032-PCFB) Crimp contact (FX15-2830-PCFB) Plugs Receptacles BB B Without shields (FX15M-P-C) Right angle, with shields –enhanced shielding (FX15S-S-0.5SH) With shields – enhanced shielding (FX15S-P-C) Right angle, without shields (FX15M-S-0.5SH) With shields – enhanced shielding PCB mouting pattern : VESA standard (FX15SC-S-0.5SH) With shields – enhanced shielding PCB mouting pattern : VESA standard (FX15SC-S-0.5SV) With shields – enhanced shielding AWG#28 to 30 (FX15SW-31P-C) A Micro-coaxial cable (FX15S-P-0.5SD) With shields-standard (FX15-31P-C) Vertical, with shields (FX15-31S-0.5SV) Ground plate (FX15S-P-GND) Ragarding the availability of the positions, contact your nearest Hirose representative. The product information in this catalog is for reference only. Please request the Engineering Drawing for the most current and accurate design information. All non-RoHS products have been discontinued, or will be discontinued soon. Please check the products status on the Hirose website RoHS search at www.hirose-connectors.com, or contact your Hirose sales representative.

FX15 SeriesG 1mm Pitch Cable-to-Board Connectors supporting LVDS signal No.2 No.1 No.30 No.31 Polarizing mark indicator 22.57±0.15 (27) 9.4±0.3 18.3±0.3 (13.45) P=1±0.1 14±0.15 P=1±0.1 15±0.15 24.6±0.3 2.7±0.1 3.7±0.3 Part number FX15S-31P-C FX15S-41P-C FX15S-51P-C CL575-2106-6 CL575-2107-9 CL575-2103-8 24.6 29.6 34.6 22.6 27.6 32.6 18.3 23.3 28.3 YES CL No. Number of contacts A RoHS YES RoHS FEDCB G With shields (FX15-31P-C) 3.7±0.3 4±0.3B±0.3 (A) 9.4±0.3 D±0.3 C±0.15 (13.45) 2.7±0.1 E±0.15 P=1±0.1 P=1±0.1 F±0.15No.1 No.2 No.n No.n-1 Polarizing mark indicator G With shields, enhanced shielding (FX15S-**P-C) Note 1: Packaged in trays. Note 2: Dimensions in parenthesis ( ) are reference dimensions. Note 1: Packaged in trays. Note 2: Dimensions in parenthesis ( ) are reference dimensions. Part number FX15-31P-C CL575-2101-2 31 CL No. Number of contacts YES RoHSPart number FX15-31P-C CL575-2101-2 31 CL No. Number of contacts The product information in this catalog is for reference only. Please request the Engineering Drawing for the most current and accurate design information. All non-RoHS products have been discontinued, or will be discontinued soon. Please check the products status on the Hirose website RoHS search at www.hirose-connectors.com, or contact your Hirose sales representative.

FX15 SeriesG 1mm Pitch Cable-to-Board Connectors supporting LVDS signal Note 1: Packaged in trays. Note 2: Dimensions in parenthesis ( ) are reference dimensions. YES RoHSPart number FX15SW-31P-C CL575-2113-1 31 CL No. Number of contacts C±0.3 F±0.15 P=1±0.1 P=1±0.1 E±0.15 No.1 No.n-1No.2 No.n B±0.3 9.55±0.3 (A) (D) (13) (13.6) 4.2±0.3 Polarizing mark indicator G Without shields (FX15M- **P-C) Part number FX15M-21P-C FX15M-31P-C CL575-2109-4 CL575-2108-1 24.8 29.8 CL No. Number of contacts A B 17.6 22.6 C 13.7 18.7 D 25.8 30.8 E F G YES RoHS 20.5 25.5 Note 1: Sold in package containing 100 pieces. Order by package. Note 2: Dimensions in parenthesis ( ) are reference dimensions. 4±0.324.6±0.3 (27) 9.4±0.3 18.3±0.3 3.7±0.3 22.57±0.15 (13.45) 2.7±0.1 14±0.15 P=1±0.1 P=1±0.1 15±0.15No.1 No.2 No.30 No.31 B A Polarizing mark indicator G With shields – enhanced shielding AWG#28 to 30 (FX15SW-31P-C) The product information in this catalog is for reference only. Please request the Engineering Drawing for the most current and accurate design information. All non-RoHS products have been discontinued, or will be discontinued soon. Please check the products status on the Hirose website RoHS search at www.hirose-connectors.com, or contact your Hirose sales representative.

FX15 SeriesG 1mm Pitch Cable-to-Board Connectors supporting LVDS signal FX15-2830PCFB I Plug crimp contacts CL No.Part number Packaging Quantity Finish RoHS CL575-2002-0 CL575-2003-3 FX15-2830PCFB FX15-3032PCFB Reel 20,000 pieces per reel Gold plated YES Applicable wire size (Stranded wire conductor) Jacket diameter UL No. AWG #28 (7/0.127 mm) AWG #30 (7/0.1 mm) Ø0.56 to 0.72mm 1517 1571 Applicable crimp contact FX15-2830PCFB FX15-3032PCFB 0.5±0.15 0.9±0.15 0.72±0.1 (7) 2±0.15 0.35±0.1 t=0.15±0.05Note: When using other than the recommended wire, contact your nearest Hirose representative. Note: Consult HRS representative when using applicator. G Applicable cable(Tin plated solid soft strands) G Wire strip length: 1.1 to 1.8 mm FX15-3032PCFB Applicable wire size (Stranded wire conductor) Jacket diameter UL No. AWG #30 (7/0.1 mm) AWG #32 (7/0.08 mm) Ø0.5 to 0.6mm 1516, 1571(Note) 1571 Product number Item CL No. AP105-FX15-2830 AP105-FX15-3032 CM-105 Applicator Press unit 901-4036-0 901-4033-1 901-0005-4 G Tools The product information in this catalog is for reference only. Please request the Engineering Drawing for the most current and accurate design information. All non-RoHS products have been discontinued, or will be discontinued soon. Please check the products status on the Hirose website RoHS search at www.hirose-connectors.com, or contact your Hirose sales representative.

FX15 SeriesG 1mm Pitch Cable-to-Board Connectors supporting LVDS signal A C±0.15 D±0.15 P=0.5±0.1 2.7±0.15 No.1 No.n No.1 No.2 No.n No.n-1 3.5±0.3 (A) B±0.3 8.75±0.3 (13) Polarizing mark indicator G Plug – Micro-coaxial cable (FX15SC- **P-0.5SD) 31.9 36.9 29.6 34.6 27.57 32.57 YES A B C D RoHSPart number FX15S-41P-0.5SD FX15S-51P-0.5SD CL575-2110-3 CL575-2118-5 CL No. Number of contacts Note 1: Packaged in trays. Note 2: Dimensions in parenthesis ( ) are reference dimensions. A±0.2 11.45±0.3 B±0.2 2.2±0.2 1.55±0.2 G Ground plate for micro-coaxial cable Note 1: Packaged in trays. Note 2: Dimensions in parenthesis ( ) are reference dimensions. 29.2 34.2 30.06 35.06 YES A B RoHSPart number FX15S-41P-GND FX15S-51P-GND CL575-2111-6 CL575-2117-2 CL No. Number of contacts The product information in this catalog is for reference only. Please request the Engineering Drawing for the most current and accurate design information. All non-RoHS products have been discontinued, or will be discontinued soon. Please check the products status on the Hirose website RoHS search at www.hirose-connectors.com, or contact your Hirose sales representative.

FX15 SeriesG 1mm Pitch Cable-to-Board Connectors supporting LVDS signal B±0.15 P=0.5±0.07

0.9 MAX

2.1 0 -0.1Inner conductor Insulator Outer conductor 0.6±0.1 AWG#36 to 40 Micro-coaxial cable 1+0.05 -0.2 A±0.2 Gronding bar

1 MIN

23.1 28.1 B Wire size (Standed wire inner conductor) Jacket diameter AWG #36 (7/0.05 mm) AWG #38 (7/0.04 mm) AWG #40 (7/0.03 mm) 0.3mm to 0.5mm G Applicable cable(Micro-coaxial cable) G Cable preparation The product information in this catalog is for reference only. Please request the Engineering Drawing for the most current and accurate design information. All non-RoHS products have been discontinued, or will be discontinued soon. Please check the products status on the Hirose website RoHS search at www.hirose-connectors.com, or contact your Hirose sales representative.

FX15 SeriesG 1mm Pitch Cable-to-Board Connectors supporting LVDS signal No.1 No.2 No.31 No.30 a b cd ef P=0.5±0.1 15±0.15 19.82±0.2 25.7±0.3 4±0.3 5.6±0.3 (6) (0.8) 0.9±0.2 22.8±0.3 4.8±0.3 I Receptacles G Vertical, with shields (FX15-31S-0.5SV) 1.5 0 -0.05 3.2+0.05 2-Ø1(TH) 2-Ø1.4(LND) 0.9 0 -0.1 4.1+0.1 17.72 0 -0.1 21.92+0.1 2.2 0 -0.1 6.7+0.1 22.8±0.05 15±0.05 0.25±0.03(Metal mask) 0.2+0.1 Note 1 :The co-planarity of the terminal leads is as follows:

• All signals and shield leads “c” and “d”: 0.1mm max.
• Shield leads “a”, “b”, “e” and “f”: 0.15 mm max. 2 :Area indicated by the crosshatched lines must be free of conductive traces or the conductive traces must be covered by resist film. 3 : Packaged on tape-and-reel, 1000 pieces per reel. 4 : Dimensions in parenthesis ( ) are reference dimensions. BRecommended PCB mounting pattern and metal mask dimensions YES RoHSPart number FX15-31S-0.5SV CL575-2201-7 31 CL No. Number of contacts The product information in this catalog is for reference only. Please request the Engineering Drawing for the most current and accurate design information. All non-RoHS products have been discontinued, or will be discontinued soon. Please check the products status on the Hirose website RoHS search at www.hirose-connectors.com, or contact your Hirose sales representative.

FX15 SeriesG 1mm Pitch Cable-to-Board Connectors supporting LVDS signal 4.45±0.1 (3) (0.2) (1.7) 0.5±0.1 A±0.2 P=1±0.1 P=1±0.1 C±0.15 D±0.15 B±0.2 E±0.3 0.2±0.05No.1 No.2 No.n No.n-1 (2.6) (4) Polarizing mark indicator 4.4±0.3 G Right angle with shields – enhanced shielding (FX15S-**S-0.5SH) L 0 -0.05 4.25 4.15 K±0.05 0.5±0.03 0.25±0.03(Metal mask) J 0-0.05 H+0.05 0 G 0-0.05 F+0.05 0 3.55+0.05 0 2.05 0 -0.05 M+0.05 0 N23.2 0-0.05 P26.8+0.05 0 3.7+0.05 0 1.45 0 -0.052.2+0.05 0 1.7 0 -0.05 3.7+0.05 0 R 13.85 S 0.3±0.03(Land) 2 : Do not place any components in the area indicated. Placement of components in this area may affect mating and latch lock operation. 3 : Area indicated by the cross-hatched lines must be free of conductive traces or the conductive traces must be covered by resist film. 4 : The area marked indicates vacuum pick-and-place area for board placement with automatic equipment. 5 : Vacuum pick-up area 6 : Packaged on tape-and-reel, 1000 pieces per reel. 7 : Dimensions in parenthesis ( ) are reference dimensions. BRecommended PCB mounting pattern and metal mask dimensions Part number FX15S-31S-0.5SH FX15S-41S-0.5SH FX15S-51S-0.5SH CL575-2306-5 CL575-2307-8 CL575-2303-7 HRS No. Number of contacts A B C D 27.8 32.8 37.8 E 28.8 33.8 38.8 F 24.8 29.8 34.8 G 21.6 26.6 31.6 H 27.4 32.4 37.4 J K 5.2 5.2 L 8.8 8.8 M 13.2 18.2 23.2 N 16.8 21.8 26.8 P 24.8 29.8 34.8 R YES S RoHS The product information in this catalog is for reference only. Please request the Engineering Drawing for the most current and accurate design information. All non-RoHS products have been discontinued, or will be discontinued soon. Please check the products status on the Hirose website RoHS search at www.hirose-connectors.com, or contact your Hirose sales representative.

FX15 SeriesG 1mm Pitch Cable-to-Board Connectors supporting LVDS signal 4.3±0.3 4.8±0.3 (5.5) Vacuum pick and place area Polarizing mark indicator No.1 No.2 No.n No.n-1 6.55±0.3 B±0.2 D±0.15 P=1±0.1 P=1±0.1 C±0.15 A±0.2 0.5±0.1 0.2±0.05 6.15±0.3 G Right angle, without shields (FX15M- **S-0.5SH) E±0.05 0.3±0.03(Land) 0.9±0.03 3.7 0 -0.05 7.4+0.05 (1.85) 0.25±0.03(Metal mask) G 14 2 F±0.05 P=0.5±0.03 1.9 0 -0.053.4+0.05 Part number FX15M-21S-0.5SH FX15M-31S-0.5SH CL575-2309-3 CL575-2308-0 HRS No. Number of contacts A B C D 17.9 22.9 E F G YES RoHS 22.4 27.4 Note 1 : The co-planarity of all terminal leads is 0.1 mm max. 2 : Do not place any components in the area indicated. Placement of components in this area may affect mating and latch lock operation. 3 : Packaged on tape-and-reel, 1000 pieces per reel. BRecommended PCB mounting pattern and metal mask dimensions The product information in this catalog is for reference only. Please request the Engineering Drawing for the most current and accurate design information. All non-RoHS products have been discontinued, or will be discontinued soon. Please check the products status on the Hirose website RoHS search at www.hirose-connectors.com, or contact your Hirose sales representative.

FX15 SeriesG 1mm Pitch Cable-to-Board Connectors supporting LVDS signal 0.18±0.05 1.5±0.1 3.1±0.2 4.45±0.2 0.5±0.1 F±0.3 1.5±0.1 (0.25 ) (1.1) P=1±0.1 G±0.15 H±0.15 P=1±0.1 No.1 No.n 4.4±0.3 P=0.5±0.1 C±0.2 B±0.2 E±0.2 P=D±0.1 A±0.3 Polarizing mark indicator G Right angle with shields – enhanced shielding (FX15SC- **S-0.5SH) PCB mounting pattern : VESA standard 1.55±0.05 K 5.6 3.5±0.05 5.1±0.05 J±0.05 2.05±0.05 2.5±0.05 C±0.05 B±0.05 2.5±0.05 1.55±0.05 E±0.05 No.1 No.n Part number FX15SC-41S-0.5SH FX15SC-51S-0.5SH CL575-2310-2 CL575-2311-5 32.85 37.85 HRS No. Number of contacts A YES RoHS BRecommended PCB mounting pattern and metal mask dimensions B C D E 32.4 37.4 F G H 29.75 34.75 J K Note 1 : The coplanarity of the terminal leads is 0.1 mm max. 2 : Do not place any components in the area indicated. Placement of components in this area may affect mating and latch lock operation. 3 : Area indicated by the cross-hatched lines must be free of conductive traces or the conductive traces must be covered by resist film. 4 : Packaged on tape-and-reel, 1000 pieces per reel. 5 : Dimensions in parenthesis ( ) are reference dimensions. The product information in this catalog is for reference only. Please request the Engineering Drawing for the most current and accurate design information. All non-RoHS products have been discontinued, or will be discontinued soon. Please check the products status on the Hirose website RoHS search at www.hirose-connectors.com, or contact your Hirose sales representative.

FX15 SeriesG 1mm Pitch Cable-to-Board Connectors supporting LVDS signal E±0.3 A±0.2 D±0.2 P=C±0.1 0.5±0.1 P=0.5±0.1 1.5±0.1 0.18±0.05 No.nB±0.2No.1 5.3±0.3 4.2±0.2 5.5±0.3 G Vertical with shields – enhanced shielding (FX15SC- **S-0.5SV) PCB mounting pattern : VESA standard B±0.05 A±0.05 D±0.05 A±0.05 P=C±0.05 2.5±0.056-1.3±0.05 No.1 No.n BRecommended PCB mounting pattern and metal mask dimensions 32.4 37.4 YES A B C D E RoHSPart number FX15SC-41S-0.5SV FX15SC-51S-0.5SV CL575-2205-8 CL575-2204-5 CL No. Number of contacts Note 1 : The coplanarity of the terminal leads is 0.1 mm max. 2 : Area indicated by the cross-hatched lines must be free of conductive traces or the conductive traces must be covered by resist film. 3 : Packaged on tape-and-reel, 1000 pieces per reel. The product information in this catalog is for reference only. Please request the Engineering Drawing for the most current and accurate design information. All non-RoHS products have been discontinued, or will be discontinued soon. Please check the products status on the Hirose website RoHS search at www.hirose-connectors.com, or contact your Hirose sales representative.

FX15 SeriesG 1mm Pitch Cable-to-Board Connectors supporting LVDS signal I Packaging Specifications G Vertical, with shields (FX15-31SC-0.5SV) G Right angle, with shields-enhanced shielding (FX15S-S-0.5SH) G Right angle, without shields (FX15M- S-0.5SH) G Reel dimensions A A A A A (4.8) (0.5) (6.3) Unreeling direction 40.45±0.1 44±0.3 +0.1 0 Ø1.5 +0.1 0 4±0.12±0.15 12±0.1 A±0.1 B±0.1 C±0.3 Ø1.5 +0.1 0 4±0.1 12±0.1 (0.5) (4.7) (6.7) Unreeling direction A±0.1 B±0.1 C±0.3 Ø1.5 +0.1 0 4±0.12±0.1 12±0.1 (0.5) (5.15) (6.5) Unreeling direction Ø13±0.5 (1.6) (Ø380) (Ø80) (D) Part number FX15S-31S-0.5SH FX15S-41S-0.5SH FX15S-51S-0.5SH CL575-2306-5 CL575-2307-8 CL575-2303-7 20.3 26.3 26.3 HRS No. Number of contacts A 40.5 52.5 52.5 B C 44.5 56.5 56.5 D Part number FX15M-21S-0.5SH FX15M-31S-0.5SH CL575-2309-3 CL575-2308-0 20.2 20.2 HRS No. Number of contacts A 40.4 40.4 B C 44.5 44.5 D Part number FX15-31S-0.5SV CL575-2201-7 31 HRS No. Number of contacts 44.5 D The product information in this catalog is for reference only. Please request the Engineering Drawing for the most current and accurate design information. All non-RoHS products have been discontinued, or will be discontinued soon. Please check the products status on the Hirose website RoHS search at www.hirose-connectors.com, or contact your Hirose sales representative.

FX15 SeriesG 1mm Pitch Cable-to-Board Connectors supporting LVDS signal G Right angle with shields – enhanced shielding (FX15SC- S-0.5SH) G Vertical with shields – enhanced shielding (FX15SC- S-0.5SV) G Reel dimensions A±0.1 B±0.1 C±0.3 Ø1.54±0.12±0.1 12±0.1 (0.5) (6.7) +0.10 Unreeling direction Unreeling direction (0.5) A±0.1 B±0.1 C±0.3 Ø1.5 +0.10 4±0.12±0.1 12±0.1 (7) Ø13±0.5 (1.6) (Ø380) (Ø80) (E) Part number FX15SC-41S-0.5SV FX15SC-51S-0.5SV CL575-2205-8 CL575-2204-5 26.2 26.2 HRS No. Number of contacts A 52.4 52.4 B C 56.5 56.5 YES D RoHS Part number FX15SC-41S-0.5SH FX15SC-51S-0.5SH CL575-2310-2 CL575-2311-5 26.2 26.2 HRS No. Number of contacts A 52.4 52.4 B C 56.5 56.5 YES D RoHS The product information in this catalog is for reference only. Please request the Engineering Drawing for the most current and accurate design information. All non-RoHS products have been discontinued, or will be discontinued soon. Please check the products status on the Hirose website RoHS search at www.hirose-connectors.com, or contact your Hirose sales representative.

FX15 SeriesG 1mm Pitch Cable-to-Board Connectors supporting LVDS signal 250 150ç 180ç 30±10sec.90±30sec. 230ç MAX 250ç Time (sec.) Sodering (230çmin) Preheating(150 to 180ç) 230 180 150 100 Temperature (ç) BRecommended temperature profile HRS test conditions Test boardGlass epoxy 40mm∞30mm∞1mm thick Solder method :Reflow Solder composition :Paste, 96.5%Sn/3%Ag/0.5%Cu Metal mask : 0.12mm thick Reflow cycles : 2 cycles The temperature profile is based on the above conditions. In individual applications the actual temperature may vary, depending on solder paste type, volume/thickness and board size/thickness. Consult your solder paste and equipment manufacturer for specific recommendations. Note: The temperature profile indicates the maximum temperature of the connector surfaces at the highest point from the PCB mounting surface. BCleaning recommendations Water based cleaning When using water based cleaning agents (e.g., terpene, alkali saponifiers), select the cleaning agent based on the documentatio n issued by the various manufacturers of cleaning agents which describes it’s affects on metals, platings and plastics. Remove an y moisture after cleaning. Residual flux or cleaning agents in the contact areas may affect electrical performance. Organic solvent cleaning Solvent type Room temperature cleaning Heated cleaning IPA (Isoporopyl alcohol) HCFC (Hydrochlorofluorocarbon) YES YES YES YES The product information in this catalog is for reference only. Please request the Engineering Drawing for the most current and accurate design information. All non-RoHS products have been discontinued, or will be discontinued soon. Please check the products status on the Hirose website RoHS search at www.hirose-connectors.com, or contact your Hirose sales representative.

FX15 SeriesG 1mm Pitch Cable-to-Board Connectors supporting LVDS signal Precautions and recommendations Retention tab Crimp side Molded-in lance Molded-in lance Molded-in lance Retention tab facing down Retention tab facing up Retention tab N Wire termination The following documents will be needed in order to perform the cable terminations. 1Basic cable termination and crimp requirements (general explanations). 2Contact crimp termination machine instruction manual (Explanation of the press) 3Applicator parts installation table (Applicator installation explanation) 4Crimp conditions table (Crimp height/Tensile strength standard values) 5Crimp quality fundamentals manual (Bell-mouth dimensions, bent up, bent down, rolling, etc.) * Correct cable preparation and crimp termination is based on understanding and following the procedures in the above documents. N Insertion of the crimp contacts in the housing Crimp contacts are inserted in the housing as illustrated below. Exercising caution when inserting, align the retention tab of the contact with the corresponding molded-in lance in the housing’s contact cavity and push the contacts in. Make sure that the contact is fully inserted and the retention tab clears the molded-in lance. N Verify that the retention tabs clear the molded-in lances as shown on the illustration below. Light pull on the wire, with force NOT EXCEEDING 3N will also verify the correct contact insertion. N Removal of the contacts Using sharp-pointed tool of appropriate size gently lift the molded-in tab and pull-out the terminated contacts. Excersize caution as NOT to damage the molded-in lance. Should the damage occur, the entire housing will need to be replaced. The product information in this catalog is for reference only. Please request the Engineering Drawing for the most current and accurate design information. All non-RoHS products have been discontinued, or will be discontinued soon. Please check the products status on the Hirose website RoHS search at www.hirose-connectors.com, or contact your Hirose sales representative.

FX15 SeriesG 1mm Pitch Cable-to-Board Connectors supporting LVDS signal Soldering area 1 Soldering area 2 (Ground harness examples) B B [Soldering precautions related to FX15S-**P-C connectors ] N Grounding Methods of the ground wire or shields for the cable assemblies 1Solder the ground wire or the shields ONLY in the areas specifically designated for this purpose, as shown on the illustrations below. 2Observe the soldering iron tip temperature and soldering time specified. 3Do not apply excessive force to the connector by pressing it with the tip of a soldering iron. 4Do not splatter the flux from the solder core. Precautions and recommendations The product information in this catalog is for reference only. Please request the Engineering Drawing for the most current and accurate design information. All non-RoHS products have been discontinued, or will be discontinued soon. Please check the products status on the Hirose website RoHS search at www.hirose-connectors.com, or contact your Hirose sales representative.

FX15 SeriesG 1mm Pitch Cable-to-Board Connectors supporting LVDS signal 2Minimize the length of outer conductor beyond the ground the bar. 3Length of cutting the extra cable shall be 2.1 mm Max. Its over length will cause the cable touching the connector body during assembly and cause defective product. Minimal length 2.0 mm is a recommended dimension and allowed to be changed if necessary, as long as ensuring good solderability. 4Pre-solder and coat the inner conductor at the cable end. 2. Recommended solder for the assembly is flux cored solder with 0.2 mm dia. (Lead-free: Sn-3Ag-0.5Cu), 21 mm length. If you consider using additional flux, please pay enough attention not to have flux wicking to the contact area. Flux wicking to the contact area will cause contact failure. 3. Place the cable to the connector and check the below points before soldering by cable assembly machine. 1Misalinment of cable end to the terminals in pitch direction 2Excessive floating of cable end 4. Follow the recommended temperature profile shown below for the soldering. However, the optimum condition could vary depending on various including type of cable and its length, solder type. Therefore refer to the recommended temperature profile and optimize the condition if necessary. N Plug – micro-coaxial cable [Coutions for soldring] 1. For the micro coaxial cable assembled to this connector, cable alignment process as shown in "Recommended cable" on the page 1 is required before assembly. 1Width of ground bar shall be 1.05 mm Max. including misalignment of overlapping, flush by cutting, side drop or soldering. Using an inadequate cable will interfere the assembly to the connector. Forceful assembly and soldering could cause mis-soldering to defective product. Precautions and recommendations Inner conductor Outer conductor Grounding bar q w w e rSolder coating qMisalignment in pitch direction wfloating 50ç 250ç 265ç Pre-heating Heating Idling 2s 1s 2s 3-4s 220ç Duration of pressure application Solder tip pressurization Temperature Duration Heating 265±5ç 3~4 sec 13~17N The product information in this catalog is for reference only. Please request the Engineering Drawing for the most current and accurate design information. All non-RoHS products have been discontinued, or will be discontinued soon. Please check the products status on the Hirose website RoHS search at www.hirose-connectors.com, or contact your Hirose sales representative.

FX15 SeriesG 1mm Pitch Cable-to-Board Connectors supporting LVDS signal [Coutions for potting process] 1. Protect the soldered area by UV cured resin (referred as "potting" hereafter), in order to prevent cable breakage during cabling and other troubles. 2. Apply 3033 manufactured by THREEBOND CO., LTD. or any equivalent product for potting. Follow the instruction of potting manufacture's for the condition of UV exposure. 3. Refer to the following conditions the potting area. 4. Use extreme care for the handling after solding to the end potting process not to apply stress to the cable, otherwise, cable could be broken. 5. After soldering, check that no defect is found at soldered area. Examples of correct soldered and defective soldered state are shown below. Precautions and recommendations A A AA B B BB Correct soldering Solder shortage solder bridge Floating A 0 2.15 0 -0.4 1.25 0 -0.75 Enlarged view A 23.7 28.7 Number of contacts A The product information in this catalog is for reference only. Please request the Engineering Drawing for the most current and accurate design information. All non-RoHS products have been discontinued, or will be discontinued soon. Please check the products status on the Hirose website RoHS search at www.hirose-connectors.com, or contact your Hirose sales representative.

FX15 SeriesG 1mm Pitch Cable-to-Board Connectors supporting LVDS signal 3. Check the six fitting points after assembly and make sure that they are all correctly fitted together. [Soldering to ground plate] 1. Solder down the metal bar of the cable and ground plate after the assembly of ground plate in order to enhance the grounding performance and robustness against cable stroke to up and down direction. [Coutions for ground plate assembly] 1. Attach a ground plate separately provided as FX15S-41P-GND after the cable assembly process. 2. Place the ground plate onto the connector horizontally and pinch two components from top and bottom with fingers. Precautions and recommendations Pinch from top and bottom with fingers A Ground plate (FX15S-41P-GND) qAssembly wHorizontally from the top ePinch with fingers A Fitting Fitting Fitting Fitting Fitting Fitting A Ground plate does not hook the protrusion of connector housing Ground plate hooks the protrusion of connector housing How to check fitting points OK NG (Cut section of fitting points) Soldering Soldering A The product information in this catalog is for reference only. Please request the Engineering Drawing for the most current and accurate design information. All non-RoHS products have been discontinued, or will be discontinued soon. Please check the products status on the Hirose website RoHS search at www.hirose-connectors.com, or contact your Hirose sales representative.

FX15 SeriesG 1mm Pitch Cable-to-Board Connectors supporting LVDS signal Precautions and recommendations Connectors Packaging Triangle mark MatingMating Arrow mark Triangle mark Center mark Center mark N Packaging of the complete cable assemblies Exercise caution as not to tangle, twist or deform the complete cable assemblies when packaging. Special care should be taken NOT to apply any excessive pull forces to the individual wires. When removing the cable assemblies from the packaging do not pull on the wires. Make sure that the latch-locks are not interfering with packaging. N Mating of the connectors The connectors have built-in polarizing feature and will NOT mate when reversed. Do NOT try forced mating. Align the connectors as shown on the illustration below and fully insert the plug into the receptacle. Confirm that both latch-locks are fully engaged. The product information in this catalog is for reference only. Please request the Engineering Drawing for the most current and accurate design information. All non-RoHS products have been discontinued, or will be discontinued soon. Please check the products status on the Hirose website RoHS search at www.hirose-connectors.com, or contact your Hirose sales representative.

FX15 SeriesG 1mm Pitch Cable-to-Board Connectors supporting LVDS signal Precautions and recommendations B B B 2Pull straight apart Press Press Press Press B B Lock latches N Handling of Connectors after Mating Do not to apply excessive forces to the connectors when routing the cable after mating. Pulling on the entire cable with a force of 20 N or greater can damage the connector. Please take due care not to pull the cable. N Un-mating of the connectors Depress equally both sides of the latch-locks as shown on the illustration and pull the plug straight out. Do not pull on the cables! The product information in this catalog is for reference only. Please request the Engineering Drawing for the most current and accurate design information. All non-RoHS products have been discontinued, or will be discontinued soon. Please check the products status on the Hirose website RoHS search at www.hirose-connectors.com, or contact your Hirose sales representative.

FX15 SeriesG 1mm Pitch Cable-to-Board Connectors supporting LVDS signal BTechnical Information (FX15S Series) G Eye Pattern Waveforms (700 MHz) G Shielding Effectiveness (Shielding Characteristics Comparison Using a 2-chamber Shielded Room) Notes:The measurement value of "Without plug-side shields + Without receptacle-side shields” are taken as the zero level of the graph vertical axis dB. The respective results express the noise suppression effect (dB) as a relative comparison value with this "without shields” condition as the reference. With cable-side shields + With PCB-side shields With cable-side shields + Without PCB-side shields Without cable-side shields + With PCB-side shields Without cable-side shields + Without PCB-side shields ➝ (0 dB line) Frequency (GHz) Shielding Effect (dB) Measured shielding effectiveness for frequencies from 100 MHz to 2 GHz. Shielded connectors show noise suppression of 10 db to 20 dB, when compared with connectors without the shields. 1 m Cable Length 1.5 m Cable Length The product information in this catalog is for reference only. Please request the Engineering Drawing for the most current and accurate design information. All non-RoHS products have been discontinued, or will be discontinued soon. Please check the products status on the Hirose website RoHS search at www.hirose-connectors.com, or contact your Hirose sales representative.

Click to View Pricing, Inventory, Delivery & Lifecycle Information: Hirose Electric: AP105-FX15-3032 FX15-3032PCFA FX15-2830PCFB FX15-3032PCFB FX15-31P-C FX15S-51P-C FX15S-31P-C FX15S-41P-C FX15S-41P-C(61) FX15M-31P-C FX15M-21P-C FX15S-41P-0.5SD FX15S-41P-GND FX15SW- 31P-C FX15S-51P-GND FX15S-51P-0.5SD FX15-31S-0.5SV FX15SC-51S-0.5SV FX15SC-41S-0.5SV FX15S-51S- GND(A)