FV024908

FV024908 3M | Alldatasheet

Document overview

• Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
• PDF pages: 5

Technical content

March, 2017 3M™ Textured Vinyl Durable Label Material FV024908 Product Description 3M™ Textured Vinyl Durable Label Materials are exible and conformable clear vinyl label stocks that oer durability and moisture resistance. These vinyl labels utilize 3M™ Adhesive P1212 which is a high clarity general purpose acrylic emulsion that exhibits good initial tack, excellent die cutting properties, minimal cold ow, and good UV resistance. Product Features

3M™ Textured Vinyl Durable Label Material FV024908 Technical Information Note The following technical information and data should be considered representative or typical only and should not be used for specication purposes. Construction Tested Adhesion properties determined per TLMI Method using 1.0 mil polyester with 1.0 mil of adhesive on a polished stainless steel panel. Typical Physical Properties Property Values Facestock Clear Textured Vinyl NTC Facestock Thickness 0.13 mm 5 mil Adhesive P1212 Perm. 18 Liner 44# Poly/Kraft liner where polypropylene has been laminated to a 44# brown kraft sheet Liner Thickness 0.079 mm 3.1 mil Adhesive Coat Weight 1.58 to 1.93 g/100 in² Convertability 3M™ General Purpose Acrylic Adhesive P1212 is designed to be compatible with a variety of print methods and indoor end use applications. Adhesive processing issues are not anticipated when proper roll tensions, handling and storage conditions are used. Please refer to the die cutting/converting section of this data page or the “Guide to Converting and Handling Label Products” technical bulletin for additional information. Note Calipers are nominal values Typical Performance Characteristics Table continued on next page PropertyValues Method EnvironmentalCondition Substrate Notes Temp C TempF Service Temperature Range -29 to 60 °C -20 to 140 °F Application Temperature 5 to 49 °C 40 to 120 °F 180° Peel Adhesion

5.28 N/cm TLMI 52%RH Stainless Steel 12 in/min (300 mm/min)

3M™ Textured Vinyl Durable Label Material FV024908 Typical Performance Characteristics (continued) PropertyValues Method EnvironmentalCondition Substrate Notes Temp C TempF 180° Peel Adhesion 48 oz/in TLMI 52%RH Stainless Steel 12 in/min (300 mm/min) 22C 72F Loop Tack 3.16 N/cm 28.8 oz/in TLMI 12 in/min, 1 in wide sample Shear Adhesion3 hr TLMI 0.25 in² x 500g Liner Release 15 to 50 g/2 in TLMI 180° removal, 300 in/min Handling/Application Information Application Ideas Decorative overlaminate for labels on durable goods, power tools, equipment and machinery. Application Techniques Printing This lm is not treated for printability. Storage and Shelf Life Store under normal conditions of 70°F (21°C) and 50% relative humidity. To minimize the eects of humidity on the products, package the die-cut and printed stock in polyethylene bags. Low density polyethylene (2-4 mils) can help prevent humidity penetration. To obtain best performance, use this product within 24 months from the date of manufacture. Industry Specications Meets CONEG requirements FDA 21 CFR 175.105 Trademarks 3M is a trademark of 3M Company.

3M™ Textured Vinyl Durable Label Material FV024908 References Safety Data Sheet (SDS) https://www.3m.com/3M/en_US/company-us/SDS-search/results/?gsaAction=msdsSRA&msdsLocale=en_US&co=ptn&q=FV024908 FV024908 FV02490N FV02800N Facestock Clear Textured Vinyl NTC Clear Textured Vinyl NTC Clear Textured Vinyl NTC Facestock Thickness (mm) 0.13 0.13 0.1 Adhesive P1212 Perm. 18 P1212 Perm. 18 P1212 Perm. 18 Liner 44# Poly/Kraft liner where polypropylene has been laminated to a 44# brown kraft sheet Clear Polyester Clear Polyester Liner Thickness (mm) 0.079 0.038 0.038 This Industrial Adhesives and Tapes Division product was manufactured under a 3M quality system registered to ISO 9001 standards.

3M™ Textured Vinyl Durable Label Material FV024908 Information 3M United States 3M Center St. Paul, MN 55144-1000 800-362-3550 www.3M.com Please recycle. © 3M 2021. All Rights Reserved. The brands listed above are trademarks of 3M Technical Information: The technical information, guidance, and other statements contained in this document or otherwise provided by 3M are based upon records, tests, or experience that 3M believes to be reliable, but the accuracy, completeness, and representative nature of such information is not guaranteed. Such information is intended for people with knowledge and technical skills sucient to assess and apply their own informed judgment to the information. No license under any 3M or third party intellectual property rights is granted or implied with this information. Warranty, Limited Remedy, and Disclaimer: Unless a dierent warranty is specically stated on the applicable 3M product packaging or product literature (in which case such warranty governs), 3M warrants that each 3M product meets the applicable 3M product specication at the time 3M ships the product. 3M MAKES NO OTHER WARRANTIES OR CONDITIONS, EXPRESS OR IMPLIED, INCLUDING, BUT NOT LIMITED TO, ANY IMPLIED WARRANTY OR CONDITION OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE, OR ARISING OUT OF A COURSE OF DEALING, CUSTOM, OR USAGE OF TRADE. If a 3M product does not conform to this warranty, then the sole and exclusive remedy is, at 3M’s option, replacement of the 3M product or refund of the purchase price. Limitation of Liability: Except for the limited remedy stated above, and except to the extent prohibited by law, 3M will not be liable for any loss or damage arising from or related to the 3M product, whether direct, indirect, special, incidental, or consequential (including, but not limited to, lost prots or business opportunity), regardless of the legal or equitable theory asserted, including, but not limited to, warranty, contract, negligence, or strict liability.