FSQ565RS FAIRCHILD | Alldatasheet

Document overview

  • Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
  • PDF pages: 23

Technical content

Features

! Optimized for Quasi-Resonant Converters (QRC) ! Low EMI through Variable Frequency Control and AVS (Alternating Valley Switching) ! High-Efficiency through Minimum Voltage Switching ! Narrow Frequency Variation Range over Wide Load and Input Voltage Variation ! Advanced Burst-Mode Operation for Low Standby Power Consumption ! Simple Scheme for Sync Voltage Detection ! Pulse-by-Pulse Current Limit ! Various Protection Functions: Overload Protection (OLP), Over-Voltage Protection (OVP), Internal Thermal Shutdown (TSD) with Hysteresis, Output Short Protection (OSP) ! Under-Voltage Lockout (UVLO) with Hysteresis ! Internal Startup Circuit ! Internal High-Voltage Sense FET (650V) ! Built-in Soft-Start (17.5ms)

Applications

! Power Supply for LCD TV and Monitor, VCR, SVR, STB, and DVD & DVD Recorder ! Adapter Related Resources Visit: http://www.fairchildsemi.com/apnotes/ for: ! AN-4134: Design Guidelines for Offline Forward Converters Using Fairchild Power Switch (FPS ! AN-4137: Design Guidelines for Offline Flyback Converters Using Fairchild Power Switch (FPS ! AN-4140: Transformer Design Consideration for Offline Flyback Converters Using Fairchild Power Switch (FPS™) ! AN-4141: Troubleshooting and Design Tips for Fairchild Power Switch (FPS ™) Flyback Applications ! AN-4145: Electromagnetic Compatibility for Power Converters ! AN-4147: Design Guidelines for RCD Snubber of Flyback Converters ! AN-4148: Audible Noise Reduction Techniques for Fairchild Power Switch (FPS™) Applications ! AN-4150: Design Guidelines for Flyback Converters Using FSQ-Series Fairchild Power Switch (FPS

Description

A Quasi-Resonant Converter (QRC) generally shows lower EMI and higher power conversion efficiency than a conventional hard-switched converter with a fixed switching frequency. The FSQ-series is an integrated Pulse-Width Modulation (PWM) controller and SenseFET specifically designed for quasi-resonant operation and Alternating Valley Switching (AVS). The PWM controller includes an integrated fixed-frequency oscillator, Under-Voltage Lockout (UVLO), Leading- Edge Blanking (LEB), optimized gate driver, internal soft- start, temperature-compensated precise current sources for a loop compensation, and self-protection circuitry. Compared with a discrete MOSFET and PWM controller solution, the FSQ-series can reduce total cost, component count, size, and weight; while simultaneously increasing efficiency, productivity, and system reliability. This device provides a basic platform for cost-effective designs of quasi-resonant switching flyback converters.

FSQ0565RS/RQ — Green-Mode Farichild Power Switch (FPS™) for Quasi-Resonant Operation © 2008 Fairchild Semiconductor Corporation www.fairchildsemi.com FSQ0565RS/RQ Rev. 1.0.3 2

Ordering Information

For Fairchild’s definition of Eco Status, please visit: http://www.fairchildsemi.com/company/green/rohs_green.html. Notes: 1. The junction temperature can limit the maximum output power. 2. 230VAC or 100/115VAC with doubler. 3. Typical continuous power in a non-ventilated enclosed adapter measured at 50°C ambient temperature. 4. Maximum practical continuous power in an open-frame design at 50°C ambient. 5. Eco Status, RoHS Application Diagram Figure 1. Typical Flyback Application

Figure 4. Pin Configuration (Top View) 1D r a i n SenseFET Drain. High-voltage power SenseFET drain connection. 2G N D Ground. This pin is the control ground and the SenseFET source. both startup and steady-state operation. protection triggers, which shuts down the FPS. ing. In normal quasi-resonant operation, the threshold of the sync comparator is 1.2V/1.0V. disabled. It is not recommended to connect Vstr and Drain together.

FSQ0565RS/RQ — Green-Mode Farichild Power Switch (FPS™) for Quasi-Resonant Operation © 2008 Fairchild Semiconductor Corporation www.fairchildsemi.com FSQ0565RS/RQ Rev. 1.0.3 5 Absolute Maximum Ratings Stresses exceeding the absolute maximum ratings may damage the device. The device may not function or be opera- ble above the recommended operating conditions and stressing the parts to these levels is not recommended. In addi- tion, extended exposure to stresses above the recommended operating conditions may affect device reliability. The absolute maximum ratings are stress ratings only. TA = 25°C, unless otherwise specified. Notes: 6. Repetitive rating: pulse-width limited by maximum junction temperature. 7. L=14mH, starting TJ=25°C. Thermal Impedance TA = 25°C unless otherwise specified. Notes: 8. Free standing with no heat-sink under natural convection. 9. Infinite cooling condition - refer to the SEMI G30-88. Symbol Parameter Min. Max. Unit Vstr Vstr Pin Voltage 500 V VDS Drain Pin Voltage 650 V VCC Supply Voltage 20 V VFB Feedback Voltage Range -0.3 13.0 V VSync Sync Pin Voltage -0.3 13.0 V IDM Drain Current Pulsed 11 A ID Continuous Drain Current(6) TC = 25°C 2.8 A TC = 100°C 1.7 EAS Single Pulsed Avalanche Energy(7) 190 mJ PD Total Power Dissipation (TC=25°C) 45 W TJ Operating Junction Temperature Internally limited °C TA Operating Ambient Temperature -25 +85 °C TSTG Storage Temperature -55 +150 °C ESD Electrostatic Discharge Capability, Human Body Model 2.0 kV Electrostatic Discharge Capability, Charged Device Model 2.0 Symbol Parameter Package Value Unit θJA Junction-to-Ambient Thermal Resistance(8) TO-220F-6L 50 °C/W θJC Junction-to-Case Thermal Resistance(9) 2.8 °C/W

FSQ0565RS/RQ — Green-Mode Farichild Power Switch (FPS™) for Quasi-Resonant Operation © 2008 Fairchild Semiconductor Corporation www.fairchildsemi.com FSQ0565RS/RQ Rev. 1.0.3 6

Electrical Characteristics

TA = 25°C unless otherwise specified. Continued on the following page... Symbol Parameter Condition Min. Typ. Max. Unit SENSEFET SECTION BVDSS Drain Source Breakdown Voltage V CC = 0V, ID = 100µA 650 V IDSS Zero-Gate-Voltage Drain Current V DS = 560V 300 µA RDS(ON) Drain-Source On-State Resistance T J = 25°C, ID = 0.5A 1.76 2.20 Ω COSS Output Capacitance V GS = 0V, VDS = 25V, f = 1MHz 78 pF td(on) Turn-On Delay Time V DD = 350V, ID = 25mA 22 ns tr Rise Time V DD = 350V, ID = 25mA 52 ns td(off) Turn-Off Delay Time V DD = 350V, ID = 25mA 95 ns tf Fall Time V DD = 350V, ID = 25mA 50 ns CONTROL SECTION tON.MAX Maximum On Time T J = 25°C 8.8 10.0 11.2 µs tB Blanking Time T J = 25°C, Vsync = 5V 13.5 15.0 16.5 µs tW Detection Time Window T J = 25°C, Vsync = 0V 6.0 µs fS Initial Switching Frequency 59.6 66.7 75.8 kHz ΔfS Switching Frequency Variation(11) -25°C < TJ < 85°C ±5 ±10 % tAVS AVS Triggering Threshold(11) On Time at VIN = 240VDC, Lm = 360μH (AVS triggered when VAVS > spec. and tAVS < spec.) 4.0 µs VAVS Feedback Voltage 1.2 V tSW Switching Time Variance by AVS(11) Sync = 500kHz sine input VFB = 1.2V, tON = 4.0µs 13.5 20.5 µs IFB Feedback Source Current V FB = 0V 700 900 1100 µA DMIN Minimum Duty Cycle V FB = 0V 0 % VSTART UVLO Threshold Voltage 11 12 13 V VSTOP After turn-on 7 8 9 V tS/S Internal Soft-Start Time With free-running frequency 17.5 ms VOVP Over-Voltage Protection (FSQ0565RS) 18 19 20 V VOVP Over-Voltage Protection (FSQ0565RQ) Threshold Voltage VCC = 15V, VFB = 2V 7.4 8 9.6 V tOVP Blanking Time(11) 1.0 1.7 2.4 µs BURST-MODE SECTION VBURH Burst-Mode Voltages T J = 25°C, tPD = 200ns(10) 0.45 0.55 0.65 V VBURL 0.25 0.35 0.45 V Hysteresis 200 mV

FSQ0565RS/RQ — Green-Mode Farichild Power Switch (FPS™) for Quasi-Resonant Operation © 2008 Fairchild Semiconductor Corporation www.fairchildsemi.com FSQ0565RS/RQ Rev. 1.0.3 7 Electrical Characteristics (Continued) TA = 25°C unless otherwise specified. Notes: 10. Propagation delay in the control IC. 11. Guaranteed by design; not tested in production. 12. Includes gate turn-on time. Symbol Parameter Condition Min. Typ. Max. Unit PROTECTION SECTION ILIMIT Peak Current Limit FSQ0565RS T J = 25°C, di/dt = 370mA/µs 2.00 2.25 2.50 A ILIMIT FSQ0565RQ T J = 25°C, di/dt = 370mA/µs 2.64 3.0 3.36 A VSD Shutdown Feedback Voltage V CC = 15V 5.5 6.0 6.5 V IDELAY Shutdown Delay Current V FB = 5V 4 5 6 µA tLEB Leading-Edge Blanking Time(11) 250 ns tOSP Output Short Protection(11) Threshold Time TJ = 25°C OSP triggered when tON < tOSP, VFB > VOSP and lasts longer than tOSP_FB 1.2 1.4 µs VOSP Threshold Feedback Voltage 1.8 2.0 V tOSP_FB Feedback Blanking Time 2.0 2.5 3.0 µs TSD Thermal Shutdown(11) Shutdown Temperature 125 140 155 Hys Hysteresis 60 SYNC SECTION VSH1 Sync Threshold Voltage 1 V CC = 15V, VFB = 2V 1.0 1.2 1.4 V VSL1 0.8 1.0 1.2 tsync Sync Delay Time(11, 12) 230 ns VSH2 Sync Threshold Voltage 2 V CC = 15V, VFB = 2V 4.3 4.7 5.1 V VSL2 4.0 4.4 4.8 VCLAMP Low Clamp Voltage ISYNC_MAX = 800µA, ISYNC_MIN = 50µA 0.0 0.4 0.8 V TOTAL DEVICE SECTION IOP Operating Supply Current V CC = 13V 1 3 5 mA ISTART Start Current VCC = 10V (before VCC reaches VSTART) 350 450 550 µA ICH Startup Charging Current V CC = 0V, VSTR = minimum 50V 0.65 0.85 1.00 mA VSTR Minimum VSTR Supply Voltage 26 V

FSQ0565RS/RQ — Green-Mode Farichild Power Switch (FPS™) for Quasi-Resonant Operation © 2008 Fairchild Semiconductor Corporation www.fairchildsemi.com FSQ0565RS/RQ Rev. 1.0.3 8 Comparison Between FSDM0x65RNB and FSQ-Series Differences Between FSQ0565RS and FSQ0565RQ Function FSDM0x65RE FSQ-Series FSQ-Series Advantages Operation Method Constant Frequency PWM Quasi-Resonant Operation ! Improved efficiency by valley switching ! Reduced EMI noise ! Reduced components to detect valley point EMI Reduction Frequency Modulation Reduced EMI Noise ! Valley Switching ! Inherent Frequency Modulation ! Alternate Valley Switching Hybrid Control CCM or AVS Based on Load and Input Condition ! Improves efficiency by introducing hybrid control Burst-Mode Operation Burst-Mode Operation Advanced Burst-Mode Operation ! Improved standby power by advanced burst-mode Strong Protections OLP, OVP OLP, OVP, OSP ! Improved reliability through precise OSP TSD 145°C without Hysteresis 140°C with 60°C Hysteresis ! Stable and reliable TSD operation ! Converter temperature range Function FSQ0565RS FSQ0565RQ Remark ILIM 2.25A 3.0A ! Lower current peak is suitable to reduce conduc- tion loss ! Higher current peak is suitable for handling higher power Over Voltage Protection VCC OVP (triggered by VCC voltage) Sync OVP (triggered by Sync voltage) ! Sync OVP is suitable when VCC voltage is pre reg- ulated.

  1. Startup: At startup, an internal high-voltage current

below the stop voltage of 8V. Figure 23. Startup Circuit

  1. Feedback Control: FPS employs current-mode

are typically used to impl ement the feedback network. increased or the output load is decreased. Figure 24. Pulse-Width-Modulation (PWM) Circuit

2.1 Pulse-by-Pulse Current Limit: Because current-

through the SenseFET is limited.

2.2 Leading-Edge Blanking (LEB): At the instant the

LEB) after the SenseFET is turned on.

  1. Synchronization: The FSQ-series employs a quasi-

winding voltage, as shown in Figure 25. Figure 25. Quasi-Resonant Switching Waveforms

6 VSTR

4 OSC

4.1 Overload Protection (OLP): Overload is defined as

protection circuit should trigger to protect the SMPS. 20 ~ 50ms delay time is typical for most applications. Figure 30. Overload Protection

4.2 Abnormal Over-Current Protection (AOCP): When

Figure 31. Abnormal Over-Current Protection

4.3 Output-Short Protection (OSP): If the output is

abnormal condition output short is shown in Figure 32. Figure 32. Output Short Waveforms

4.4.1 V CC Over-Voltage Protection (OVP) of

normal operation, VCC should be designed below 19V.

4.4.2 Sync Over-Voltage Protection (OVP) of

Figure 33. OVP Triggering of FSQ0565RQ

4.5 Thermal Shutdown with Hysteresis (TSD): The

SenseFET and the control IC are built in one package. CC reaches startup voltage (Vstart).

  1. Soft-Start: The FPS has an internal soft-start circuit

stress on the secondary diode during startup.

  1. Burst Operation: To minimize power dissipation in

thereby reducing switching loss in standby mode. Figure 34. Waveforms of Burst Operation

FSQ0565RS/RQ — Green-Mode Farichild Power Switch (FPS™) for Quasi-Resonant Operation © 2008 Fairchild Semiconductor Corporation www.fairchildsemi.com FSQ0565RS/RQ Rev. 1.0.3 18 Typical Application Circuit ! Average efficiency of 25%, 50%, 75%, and 100% load conditions is higher than 80% at universal input ! Low standby mode power consumption (<1W at 230VAC input and 0.5W load) ! Reduce EMI noise through valley switching operation ! Enhanced system reliability through various protection functions ! Internal soft-start (17.5ms) Key Design Notes ! The delay time for overload protection is designed to be about 23ms with C105 of 33nF. If faster/slower triggering of OLP is required, C105 can be changed to a smaller/larger value (e.g. 100nF for 70ms). ! The input voltage of VSync must be between 4.7V and 8V just after MOSFET turn-off to guarantee hybrid control and to avoid OVP triggering during normal operation. ! The SMD-type 100nF capacitor must be placed as close as possible to VCC pin to avoid malfunction by abrupt pulsating noises and to improve surge immunity. 1. Schematic Figure 39. Demo Circuit of FSQ0565RS

5 R105

Figure 40. Transformer Schematic Diagram of FSQ0565RS

  1. Electrical Characteristics

FSQ0565RS/RQ — Green-Mode Farichild Power Switch (FPS™) for Quasi-Resonant Operation © 2008 Fairchild Semiconductor Corporation www.fairchildsemi.com FSQ0565RS/RQ Rev. 1.0.3 20 6. Demo Board Part List Part Value Note Part Value Note Resistor C205 47nF/50V Film (Sehwa) R101 1M Ω 1W C301 4.7nF/1kV Y-cap(Samwha) R102 75k Ω 1/2W Inductor R103 43k Ω 1W L201 5µH 5A Rating R104 0 Ω jumper L202 5µH 5A Rating R105 100 Ω optional, 1/4W Diode R107 39k Ω 1/4W, 1% D101 IN4007 VISHAY R108 27k Ω 1/4W, 1% D102 UF4004 VISHAY R201 620 Ω 1/4W ZD101 1N4745A 1W 16V Zener Diode (optional) R202 1.2k Ω 1/4W D201 MBRF10H100 10A,100V Schottky Rectifier R203 18k Ω 1/4W, 1% D202 MBRF1060 10A, 60V Schottky Rectifier R204 8k Ω 1/4W, 1% IC R205 8k Ω 1/4W, 1% IC101 FSQ0565RS FPS™ Capacitor IC201 KA431 (TL431) Voltage Reference C101 150nF/275V AC Box Capacitor(PILKOR) IC202 FOD817A Opto-Coupler C102 150nF/275V AC Box Capacitor(PILKOR) Fuse C103 100µF/400V Electrolytic (Samwha) Fuse 2A/250V C104 3.3nF/630V Film (Sehwa) NTC C105 33nF/50V Film (Sehwa) RT101 5D-9 C106 100nF/50V Mono (PILKOR) Bridge Diode C107 47µF/50V Electrolytic (Samyoung) BD101 2KBP06M Bridge Diode C201 1000µF/25V Low-ESR Electrolytic Capacitor(Samwha) Line Filter C202 1000µF/25V Low-ESR Electrolytic Capacitor(Samwha) LF101 30mH C203 2200µF/10V Low-ESR Electrolytic Capacitor(Samwha) Transformer C204 1000µF/10V Low-ESR Electrolytic Capacitor(Samwha) T1 EER3016 Ae=109.7mm

Figure 41. 6-Lead, TO-220 Package (Forming) specifically the warranty therein, which covers Fairchild products. http://www.fairchildsemi.com/packaging/.

Figure 42. 6-Lead, TO-220 Package (L-Forming) specifically the warranty therein, which covers Fairchild products. http://www.fairchildsemi.com/packaging/. A) NO PACKAGE STANDARD APPLIES. MOLD FLASH, AND TIE BAR EXTRUSIONS. C) DIMENSIONS ARE IN MILLIMETERS.

0.20 A B

© 2008 Fairchild Semiconductor Corporation www.fairchildsemi.com TRADEMARKS The following includes registered and unregistered trademarks and service marks, owned by Fairchild Semiconductor and/or its global subsidiaries, and is not intended to be an exhaustive list of all such trademarks. AccuPower¥ Auto-SPM¥ Build it Now¥ CorePLUS¥ CorePOWER¥ CROSSVOLT¥ CTL™ Current Transfer Logic™ DEUXPEED EcoSPARK® EfficientMax™ EZSWITCH™* Fairchild® Fairchild Semiconductor® FACT Quiet Series™ FACT® FAST® FastvCore¥ FETBench¥ FlashWriter®* FPS¥ F-PFS¥ FRFET® Global Power Resource SM Green FPS¥ Green FPS¥ e-Series¥ Gmax™ GTO¥ IntelliMAX¥ ISOPLANAR¥ MegaBuck™ MICROCOUPLER¥ MicroFET¥ MicroPak¥ MillerDrive™ MotionMax™ Motion-SPM™ OPTOLOGIC OPTOPLANAR® PDP SPM™ Power-SPM¥ PowerTrench® PowerXS™ Programmable Active Droop¥ QFET® QS¥ Quiet Series¥ RapidConfigure¥ Saving our world, 1mW/W/kW at a time™ SignalWise™ SmartMax™ SMART START¥ SPM STEALTH™ SuperFET¥ SuperSOT¥-3 SuperSOT¥-6 SuperSOT¥-8 SupreMOS™ SyncFET™ Sync-Lock™ The Power Franchise® TinyBoost¥ TinyBuck¥ TinyCalc¥ TinyLogic® TINYOPTO¥ TinyPower¥ TinyPWM¥ TinyWire¥ TriFault Detect¥ TRUECURRENT¥* PSerDes¥ UHC® Ultra FRFET¥ UniFET¥ VCX¥ VisualMax¥ XS™ * Trademarks of System General Corporation, used under license by Fairchild Semiconductor. DISCLAIMER FAIRCHILD SEMICONDUCTOR RESERVES THE RIGHT TO MAKE CHANGES WITHOUT FURTHER NOTICE TO ANY PRODUCTS HEREIN TO IMPROVE RELIABILITY, FUNCTION, OR DESIGN. FAIRCHILD DOES NOT ASSUME ANY LIABILITY ARISING OUT OF THE APPLICATION OR USE OF ANY PRODUCT OR CIRCUIT DESCRIBED HEREIN; NEITHER DOES IT CONVEY ANY LICENSE UNDER ITS PATENT RIGHTS, NOR THE RIGHTS OF OTHERS. THESE SPECIFICATIONS DO NOT EXPAND THE TERMS OF FAIRCHILD’S WORLDWIDE TERMS AND CONDITIONS, SPECIFICALLY THE WARRANTY THEREIN, WHICH COVERS THESE PRODUCTS. LIFE SUPPORT POLICY FAIRCHILD’S PRODUCTS ARE NOT AUTHORIZED FOR USE AS CRITICAL COMPONENTS IN LIFE SUPPORT DEVICES OR SYSTEMS WITHOUT THE EXPRESS WRITTEN APPROVAL OF FAIRCHILD SEMICONDUCTOR CORPORATION. As used herein: 1. Life support devices or systems are devices or systems which, (a) are intended for surgical implant into the body or (b) support or sustain life, and (c) whose failure to perform when properly used in accordance with instructions for use provided in the labeling, can be reasonably expected to result in a significant injury of the user. 2. A critical component in any component of a life support, device, or system whose failure to perform can be reasonably expected to cause the failure of the life support device or system, or to affect its safety or effectiveness. ANTI-COUNTERFEITING POLICY Fairchild Semiconductor Corporation's Anti-Counterfeiting Policy. Fairchild's Anti-Counterfeiting Policy is also stated on our external website, www.fairchildsemi.com, under Sales Support. Counterfeiting of semiconductor parts is a growing problem in the industry. All manufacturers of semiconductor products are experiencing counterfeiting of their parts. Customers who inadvertently purchase counterfeit parts experience many problems such as loss of brand reputation, substandard performance, failed applications, and increased cost of production and manufacturing delays. Fairchild is taking strong measures to protect ourselves and our customers from the proliferation of counterfeit parts. Fairchild strongly encourages customers to purchase Fairchild parts either directly from Fairchild or from Authorized Fairchild Distributors who are listed by country on our web page cited above. Products customers buy either from Fairchild directly or from Authorized Fairchild Distributors are genuine parts, have full traceability, meet Fairchild's quality standards for handling and storage and provide access to Fairchild's full range of up-to-date technical and product information. Fairchild and our Authorized Distributors will stand behind all warranties and will appropriately address any warranty issues that may arise. Fairchild will not provide any warranty coverage or other assistance for parts bought from Unauthorized Sources. Fairchild is committed to combat this global problem and encourage our customers to do their part in stopping this practice by buying direct or from authorized distributors. PRODUCT STATUS DEFINITIONS Definition of Terms Datasheet Identification Product Status Definition Advance Information Formative / In Design Datasheet contains the design specifications for product development. Specifications may change in any manner without notice. Preliminary First Production Datasheet contains preliminary data; supplementary data will be published at a later date. Fairchild Semiconductor reserves the right to make changes at any time without notice to improve design. No Identification Needed Full Production Datasheet contains final specifications. Fairchild Semiconductor reserves the right to make changes at any time without notice to improve the design. Obsolete Not In Production Datasheet contains specifications on a product that is discontinued by Fairchild Semiconductor. The datasheet is for reference information only. Rev. I44 FSQ0565RS/RQ — Green-Mode Farichild Power Switch (FPS™) for Quasi-Resonant Operation © 2008 Fairchild Semiconductor Corporation www.fairchildsemi.com FSQ0565RS/RQ Rev. 1.0.3 23