FSQ0170RNA ONSEMI | Alldatasheet
Document overview
- Manufacturer or author: Provided By alldatasheet.com(free datasheet download site)
- PDF pages: 18
Technical content
To learn more about ON Semiconductor, please visit our website at www.onsemi.com Is Now Part of ON Semiconductor and the ON Semiconductor logo are trademarks of Semiconductor Components Industries, LLC dba ON Semiconductor or its subsidiaries in the United States and/or other countries. ON Semiconductor owns the rights to a number to make changes without further notice to any products herein. ON Semiconductor makes no warranty, representation or guarantee regarding the suitability of its products for any particular purpose, nor does ON Semiconductor assume any liability arising out of the application or use of any product or circuit, and specifically disclaims any and all liability, including without limitation special, consequential or incidental damages. Buyer is responsible for its products and applications using ON Semiconductor products, including compliance with all laws, regulations and safety requirements or standards, regardless of any support or applications information provided by ON Semiconductor. “Typical” parameters which may be provided in ON Semiconductor data sheets and/or specifications can and do vary in different applications and actual performance may vary over time. All operating parameters, including “Typicals” must be validated for each customer application by customer’s technical experts. ON Semiconductor does not convey any license under its patent rights nor the rights of others. ON Semiconductor products are not designed, intended, or authorized for use as a critical component in life support systems or any FDA Class 3 medical devices or medical devices with a same or similar classification in a foreign jurisdiction or any devices intended for implantation in the human body. Should Buyer purchase or use ON Semiconductor products for any such unintended or unauthorized application, Buyer shall indemnify and hold ON Semiconductor and its officers, employees, subsidiaries, affiliates, and distributors harmless against all claims, costs, damages, and expenses, and reasonable attorney fees arising out of, directly or indirectly, any claim of personal injury or death associated with such unintended or unauthorized use, even if such claim alleges that ON Semiconductor was negligent regarding the design or manufacture of the part. ON Semiconductor is an Equal Opportunity/Affirmative Action Employer. This literature is subject to all applicable copyright laws and is not for resale in any manner.
© 2006 Fairchild Semiconductor Corporation www.fairchildsemi.com FSQ0170RNA, FSQ0270RNA — Green Mode Fairchild Power Switch (FPS™) October 2011 FSQ0170RNA, FSQ0270RNA Rev. 1.0.5 FPSTM is a trademark of Fairchild Semiconductor Corporation. FSQ0170RNA, FSQ0270RNA Green Mode Fairchild Power Switch (FPS™)
Features
Internal Avalanche Rugged 700V SenseFET Consumes only 0.8W at 230 VAC & 0.5W Load with Burst-Mode Operation Precision Fixed Operating Frequency, 100kHz Internal Start-up Circuit and Built-in Soft-Start Pulse-by-Pulse Current Limiting and Auto-Restart Mode Over-Voltage Protection (OVP), Overload Protection (OLP), Internal Thermal Shutdown Function (TSD) Under-Voltage Lockout (UVLO) Low Operating Current (3mA) Adjustable Peak Current Limit
Applications
Auxiliary Power Supply for PC and Server SMPS for VCR, SVR, STB, DVD & DVCD Player, Printer, Facsimile & Scanner Adapter for Camcorder Related Application Notes AN-4134: Design Guidelines for Off-line Forward Converters Using Fairchild Power Switch (FPS™) AN-4137: Design Guidelines for Off-line Flyback Converters Using Fairchild Power Switch (FPS™) AN-4141: Troubleshooting and Design Tips for Fairchild Power Switch (FPS™) Flyback Applications AN-4147: Design Guidelines for RCD Snubber of Flyback AN-4148: Audible Noise Reduction Techniques for FPS™ Applications
Description
The FSQ0170RNA, and FSQ0270RNA, consists of an integrated current mode Pulse Width Modulator (PWM) and an avalanche-rugged 700V Sense FET. It is specifically designed for high-performance off-line Switch Mode Power Supplies (SMPS) with minimal external components. The integrated PWM controller features include: a fixed-fre quency generating oscillator, Under-Voltage Lockout (UVLO) protection, Leading Edge Blanking (LEB), an optimized gate turn-on/ turn-off driver, Thermal Shutdown (TSD) protection, and temperature compensated prec ision current sources for loop compensation and fault protection circuitry. Compared to a discrete MOSFET and controller or RCC switching converter solu tion, the FSQ0170RNA, and FSQ0270RNA reduces total component count, design size, and weight while increasing efficiency, productivity, and system reliabili ty. These devices provide a basic platform that is well suited for the design of cost-effective flyback converters, as in PC auxiliary power supplies.
Ordering Information
Product Number Package Marking Code BV DSS fOSC RDS(ON) (MAX.) FSQ0170RNA 8DIP Q0170RA 700V 100kHz 11 FSQ0270RNA 8DIP Q0270RA 700V 100kHz 7.2
Figure 3. Pin Configuration (Top View) supplied via the auxiliary transformer winding. the protection mechanism to operate under true overload conditions. Peak Current Limit. This pin adjusts the peak current limit of the SenseFET. typical peak current limit is 0.8A (FSQ0170RNA), 0.9A (FSQ0270RNA). the internal switch is opened. 6D r a i n SenseFET drain. High-voltage power SenseFET drain connection. 7D r a i n SenseFET drain. High-voltage power SenseFET drain connection. 8D r a i n SenseFET drain. High-voltage power SenseFET drain connection.
FSQ0170RNA, FSQ0270RNA — Green Mode Fairchild Power Switch (FPS™) © 2006 Fairchild Semiconductor Corporation www.fairchildsemi.com FSQ0170RNA, FSQ0270RNA Rev. 1.0.5 4 Absolute Maximum Ratings Stresses exceeding the absolute maximum ratings may dam age the device. The device may not function or be operable above the recommended operating conditions and stressing the parts to these levels is not recommended. In addition, extended exposure to stresse s above the recommended operating condit ions may affect device reliability. The absolute maximum ratings are stress ratings only Notes: 5. Non-repetitive rating: Pulse width is limited by maximum junction temperature. 6. L = 51mH, starting TJ = 25C. Thermal Impedance TA = 25C, unless otherwise specified. All items are tested with the standards JESD 51-2 and 51-10 (DIP). Notes: 7. Free standing with no heatsink; without copper clad. (Measurement Condition - Just before junction temperature TJ enters into OTP.) 8. Measured on the DRAIN pin close to plastic interface. 9. Measured on the PKG top surface. Symbol Characteristic Value Unit VDRAIN Drain Pin Voltage 700 V VSTR Vstr Pin Voltage 700 V IDM Drain Current Pulsed(5) FSQ0170RNA 4 A FSQ0270RNA 8 EAS Single Pulsed Avalanche Energy(6) FSQ0170RNA 50 mJ FSQ0270RNA 140 VCC Supply Voltage 20 V VFB Feedback Voltage Range -0.3 to V CC V PD Total Power Dissipation 1.5 W TJ Operating Junction Temperature Internally limited C TA Operating Ambient Temperature -25 to +85 C TSTG Storage Temperature -55 to +150 C Symbol Parameter Value Unit JA Junction-to-Ambient Thermal Resistance(7) 80 C/W JC Junction-to-Case Thermal Resistance(8) 20 C/W JT Junction-to-Top Thermal Resistance(9) 35 C/W
FSQ0170RNA, FSQ0270RNA — Green Mode Fairchild Power Switch (FPS™) © 2006 Fairchild Semiconductor Corporation www.fairchildsemi.com FSQ0170RNA, FSQ0270RNA Rev. 1.0.5 5
Electrical Characteristics
TA = 25C unless otherwise specified. Symbol Parameter Condition Min. Typ. Max. Unit SenseFET Section(10) IDSS Zero-Gate-Voltage Drain Current VDS = 700V, VGS = 0V 50 A VDS = 560V, VGS = 0V, TC = 125C 200 RDS(ON) Drain-Source On-State Resistance(11) FSQ0170RNA VGS = 10V, ID = 0.5A 8.8 11 FSQ0270RNA 6.0 7.2 CISS Input Capacitance FSQ0170RNA VGS = 0V, VDS = 25V, f = 1MHz 250 pF FSQ0270RNA 550 COSS Output Capacitance FSQ0170RNA 25 FSQ0270RNA 38 CRSS Reverse Transfer Capacitance FSQ0170RNA 10 FSQ0270RNA 17 td(on) Turn-On Delay Time FSQ0170RNA VDS = 350V, ID = 1.0A ns FSQ0270RNA 20 tr Rise Time FSQ0170RNA 4 FSQ0270RNA 15 td(off) Turn-Off Delay Time FSQ0170RNA 30 FSQ0270RNA 55 tf Fall Time FSQ0170RNA 10 FSQ0270RNA 25 Control Section fOSC Switching Frequency 92 100 108 KHz fOSC Switching Frequency Variation(10) -25C TA 85C± 5 ± 1 0 % DMAX Maximum Duty Cycle Measured at 0.1 x V DS 55 60 65 % DMIN Minimum Duty Cycle 0 0 0 % VSTART UVLO Threshold Voltage VFB = GND 11 12 13 V VSTOP V FB = GND 7 8 9 IFB Feedback Source Current V FB = GND 0.7 0.9 1.1 mA tS/S Internal Soft-Start Time (10) VFB = 4V 10 ms
FSQ0170RNA, FSQ0270RNA — Green Mode Fairchild Power Switch (FPS™) © 2006 Fairchild Semiconductor Corporation www.fairchildsemi.com FSQ0170RNA, FSQ0270RNA Rev. 1.0.5 6 Electrical Characteristics (Continued) TA = 25C unless otherwise specified. Notes: 10. These parameters, although guaranteed, are not 100% tested in production. 11. Pulse test: Pulse width ≤ 300µs, duty ≤ 2%. 12. RSTR is connected between the rectified AC line voltage source and VSTR pin. Symbol Parameter Condition Min. Typ. Max. Unit Burst-Mode Section VBURH Burst-Mode Voltage T J 25C 0.5 0.6 0.7 V VBURL 0.3 0.4 0.5 V VBUR(HYS) 100 200 300 mV Protection Section ILIM Peak Current Limit FSQ0170RNA di/dt = 170mA/µs 0.70 0.80 0.90 A FSQ0270RNA di/dt = 200mA/µs 0.79 0.90 1.01 tCLD Current Limit Delay Time (10) 500 ns TSD Thermal Shutdown Temperature (10) 125 140 C VSD Shutdown Feedback Voltage 5.5 6.0 6.5 V VOVP Over-Voltage Protection 18 19 V IDELAY Shutdown Delay Current V FB = 4V 3.5 5.0 6.5 A tLEB Leading Edge Blanking Time(10) 200 ns Total Device Section IOP Operating Supply Current (Control Part Only) VCC = 14V 1 3 5 mA ICH Startup Charging Current VCC = 0V, RSTR<100k (12) 0.70 0.85 1.00 mA VSTR Vstr Supply Voltage V CC = 0V 24 V
- Startup: In previous generations of Fairchild Power
source turns back on if VCC drops below 8V. Figure 13. High-Voltage Current Source
- Feedback Control: The 700V FPS series employs
input voltage increases or the output load decreases. Figure 14. Pulse Width Modulation Circuit
- Leading Edge Blanking (LEB): When the internal
LEB) after the Sense FET is turned on.
- Protection Circuits: The FPS has several protective
SenseFET until the fault condition is eliminated.
4.1 Overload Protection (OLP): Overload is defined as
from 3V to 6V with 5µA current source. Figure 15. Overload Protection (OLP)
4.2 Thermal Shutdown (TSD) : The SenseFET and the
3 OSC
4.3 Over-Voltage Protection (OVP): In the event of a
CC should be designed to be below 19V.
- Soft-Start: The FPS has an internal soft-start circuit
stress on the secondary diode during startup. Figure 16. Soft-Start Function
- Burst Operation: To minimize power dissipation in
standby mode, the FPS ent ers burst-mode operation. feedback voltage drops below V BURL (typically 400mV). Figure 17. Burst Operation Function
- Adjusting Peak Current Limit: As shown in Figure
diodes are biased by the main current source of 900µA. Figure 18. Peak Current Limit Adjustment 0.6A by inserting Rx between the IPK pin and the ground. where X represents the resistance of the parallel network.
FSQ0170RNA, FSQ0270RNA — Green Mode Fairchild Power Switch (FPS™) © 2006 Fairchild Semiconductor Corporation www.fairchildsemi.com FSQ0170RNA, FSQ0270RNA Rev. 1.0.5 12 Typical Application Circuit High efficiency (> 78% at 115 VAC and 230 VAC input) Low standby mode power consumption (< 0.8W at 230 VAC input and 0.5W load) Enhanced system reliability through various protection functions Internal soft-start (10ms) Line UVLO function can be achieved using external component Key Design Notes The delay time for overload protection is designed to be about 30ms with C8 of 47nF. If faster/slower triggering of OLP is required, C8 can be changed to a smaller/larger value (e.g. 100nF for about 60ms). ZP1, DL1, RL1, RL2, RL3, RL4, RL5, RL7, QL1, QL2, and CL9 build a Line Under-Voltage Lockout block (UVLO). The Zener voltage of ZP1 determines the input voltage that makes FPS turn on. RL5 and DL1 provide a reference voltage from VCC. If the input voltage divided by RL1, RL2, and RL4 is lower than the Zener voltage of DL1, QL1 and QL2 turn on and pull down VFB to ground. An evaluation board and corresponding test report can be provided. 1. Schematic Figure 21. Demo Circuit
Figure 22. Transformer Schematic Diagram
- Electrical Characteristics
FSQ0170RNA, FSQ0270RNA — Green Mode Fairchild Power Switch (FPS™) © 2006 Fairchild Semiconductor Corporation www.fairchildsemi.com FSQ0170RNA, FSQ0270RNA Rev. 1.0.5 14 6. Demo Circuit Part List Part Number Value Quantity D escription (Manufacturer) C6, C8 47nF 2 Ceramic Capacitor C1 2.2nF (1KV) 1 AC Cerami c Capacitor(X1 & Y1) C10 1nF (200V) 1 Mylar Capacitor CS1 1.5nF (50V) 1 Ceramic Capacitor C2, C3 22µF (400V) 2 Low Impedance Electrolytic Capacitor KMX series C4, C9 1000µF (16V) 2 Low ESR Electrolytic Capacitor NXC series C5 470µF (10V) 1 Low ESR Electrolytic Capacitor NXC series C7 47µF (25V) 1 General Electrolytic Capacitor CL9 10µF (50V) 1 General Electrolytic Capacitor L1 330µH 1 Inductor L2 1µH 1 Inductor R6 2.4 (1W) 1 Fusible Resistor J1, J2, J4, L3 0 4 Jumper R2 4.7k 1R e s i s t o r R3 560 1R e s i s t o r R4 100 1R e s i s t o r R5 1.25k 1R e s i s t o r R11 1.2k 1R e s i s t o r R9 10k 1R e s i s t o r R10 2 1R e s i s t o r R14 30 1R e s i s t o r RL3 1k 1R e s i s t o r RL1, RL2 1M 2R e s i s t o r RL4 120k 1R e s i s t o r RL5 30k 1R e s i s t o r RL7 40k 1R e s i s t o r RS1 9 1R e s i s t o r ZR1 80 1R e s i s t o r U1 FOD817A 1 IC (Fairchild Semiconductor) U2 TL431 1 IC (Fairchild Semiconductor) U3 FSQ0270RNA 1 IC (Fairchild Semiconductor) QL1 2N2907 1 IC (Fairchild Semiconductor) QL2 2N2222 1 IC (Fairchild Semiconductor) D2, D3, D4, D5, D6, DS1 1N4007 6 Diode (Fairchild Semiconductor) D1 SB540 1 Schottky Diode (Fairchild Semiconductor) ZD1 1N4745 1 Zener Diode (Fairchild Semiconductor) DL1 1N5233 1 Zener Diode (Fairchild Semiconductor) ZP1 82V (1W) 1 Zener Diode (Fairchild Semiconductor) ZDS1 P6KE180A 1 TVS (Fairc hild Semiconductor)
0.070 0.045 1.78 1.14 0.140 0.125 3.56 3.17 0.021 0.015 0.53 0.38 0.135 0.125 3.43 3.18 7° TYP 0.015 0.38 MIN 0.210 5.33 MAX 0.100 2.54 C 7° TYP 0.43 10.92 MAX 0.015 0.010 0.381 0.254 0.060 1.52 MAX 0.300 7.62 0.320 0.300 8.13 7.62 0.255 0.245 6.48 6.22 0.036 0.9 TYP 0.400 0.373 10.16 9.47 0.092 2.337 PIN #1 A B R0.032 0.813 PIN #1 TOP VIEW, OPTION 1 FRONT VIEW SIDE VIEW NOTES: A. CONFORMS TO JEDEC MS-001, VARIATION BA B. CONTROLLING DIMENSIONS ARE IN INCHES. REFERENCE DIMENSIONS ARE IN MILLIMETERS. C DOES NOT INCLUDE MOLD FLASH OR PROTRUSIONS. MOLD FLASH OR PROTRUSIONS SHALL NOT EXCEED 0.010 INCHES OR 0.25MM. D DOES NOT INCLUDE DAMBAR PROTRUSIONS. DAMBAR PROTRUSIONS SHALL NOT EXCEED 0.010 INCHES OR 0.25MM. E. DIMENSIONING AND TOLERANCING PER ASME Y14.5M-2009 F. DRAWING FILENAME: MKT-N08Erev8 TOP VIEW, OPTION 2 C D C 0.001 [0.025] M C
www.onsemi.com ON Semiconductor and are trademarks of Semiconductor Components Industries, LLC dba ON Semiconductor or its subsidiaries i n the United States and/or other countries. ON Semiconductor owns the rights to a number of patents, trademarks, copyrights, trade secrets, and other intellectual property . A listing of ON Semiconductor’s product/patent ON Semiconductor makes no warranty, representation or guarantee regarding the suitability of its products for any particular purpose, nor does ON Semiconductor assume any liability arising out of the application or use of any product or circuit, and specifically disclaims any and all liability, including without limitation special, consequential or incidental damages. Buyer is responsible for its products and applications using ON Semiconductor products, including compliance with all laws, reg ulations and safety requirements or standards, regardless of any support or applications information provided by ON Semiconductor. “Typical” parameters which may be provided in ON Semiconductor data sheets and/or specifications can and do vary in different applications and actual performance may vary over time. All operating parameters, including “Typicals” must be validated for each customer application by customer’s technical experts. ON Semiconductor does not convey any license under its patent rights nor the right s of others. ON Semiconductor products are not designed, intended, or authorized for use as a critical component in life support systems or any FDA Class 3 medical devices or medical devices with a same or similar classification in a foreign jurisdiction or any devices intended for implantation in the human body. Should Buyer purchase or use ON Semiconductor products for any such unintended or unauthorized application, Buyer shall indemnify and hold ON Semiconductor and its officers, employees, subsidiaries, affiliates, and distributors harmless against all claims, costs, damages, and expenses, and reasonable attorney fees arising out of, directly or indirectly, any claim of personal injury or death associated with such unintended or unauthorized use, even if such claim alleges that ON Semiconductor was negligent regarding the design or manufacture of the part. ON Semiconductor is an Equal Opportunity/Affirmative Action Employer. This literature is subject to all applicable copyright laws and is not for resale in any manner. PUBLICATION ORDERING INFORMATION N. American Technical Support: 800−282−9855 Toll Free USA/Canada Europe, Middle East and Africa Technical Support: Phone: 421 33 790 2910 Japan Customer Focus Center Phone: 81−3−5817−1050 www.onsemi.com LITERATURE FULFILLMENT: Literature Distribution Center for ON Semiconductor 19521 E. 32nd Pkwy, Aurora, Colorado 80011 USA Phone: 303−675−2175 or 800−344−3860 Toll Free USA/Canada Fax: 303−675−2176 or 800−344−3867 Toll Free USA/Canada Email: orderlit@onsemi.com ON Semiconductor Website: www.onsemi.com Order Literature: http://www.onsemi.com/orderlit For additional information, please contact your local Sales Representative © Semiconductor Components Industries, LLC