FSP300-60THA SPI | Alldatasheet

Document overview

  • Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
  • PDF pages: 2

Technical content

Features

Complied with ATX12V 2.0 standard High efficiency and reliability Remote On/Off function Internal 12V DC fan included Noise Killer (Thermal fan speed control function) Low noise and ripple Complies with FCC part 15 subpart J Class B and CISPR 22 Class B Output over voltage, short circuit, and over current protection 100% Hi-pot, ATE, and burn-in tested Re-settable power shut down Approved by UL 60950, CSA C22.2 Level 3, TUV EN60950, NEMKO (CB Report) Sparkle Power Inc. A Leading Power Supply manufacturer Web site: www.sparklepower.com FSP300-60THA 300 Watts ATX12V 2.0 Switching Power Supply Specification Temperature Range: Operating 0° C ~ +25° C on full load; De-rate 2W/C from +50° C to +25° C; storage & shipping -20° C ~ +65° C Humidity: 90% on operating and 95% on storage Dielectric Withstand: Input to frame ground 1800V AC for 1 second Efficiency: 70% at minimum measured at nominal AC main voltage and frequency with maximum load on all output Rise Time: Less than 20ms on all output Hold-up Time: 17ms minimum at nominal input voltage Power Good Signal: Power on delay time 100 ms to 500 ms, off delay 1ms minimum (TTL and CMOS compatible) Leakage Current: Not exceed 3.5mA MTBF: 100,000 hours on maximum load at +25° C degree Dimension (WxHxL): 150x86x140mm/6”x3.4”x5.5” inches Sparkle Power Inc. Main Office

1000 Rock Avenue

San Jose, CA 95131 TEL: 408-519-8888 FAX: 408-519-9999 E-MAIL: info@sparklepower.com Sparkle Power Inc. Los Angeles Office

17071 Green Drive

City of Industry, CA 91745 TEL: 626-839-7180 FAX: 626-839-3395 Sparkle Power Inc. Colorado Office

1316 Indian Paintbrush Lane

Longmont, CO 80503 TEL: 303-776-3281 FAX: 303-776-7645 Output Characteristics Output Voltage Minimum Load Maximum Load Load Reg. Line Reg. Ripple & Noise +5V 1.0A 20/10.8A ± 5% ± 1% 50mV P-P +12V1 1.0A 8A ± 5% ± 1% 120mV P-P +12V2 1.0A 14A ± 5% ± 1% 120mV P-P -12V 0.0A 0.8A ± 10% ± 2% 120mV P-P +5Vsb 0.0A 2.0 A ± 5% ± 1% 50mV P-P *+5V and +3.3V total output not exceed 120W *When +3.3V is load on 20A, the +5V maximum load is 10.8A *When +3.3V is load on 6A, the +5V maximum load is 20A *+3.3V, +5V, +12V1, and +12V2 total output not exceed 280W

文文文文文文 文文文文文文 文文文文文文 1 / 1禁禁禁禁禁禁 OAD04022510-R7.pdf 發發發發 : 2006/2/8 7:05 下下