FSL140F-N FUZETEC | Alldatasheet
Document overview
- Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
- PDF pages: 3
Technical content
FUZETEC TECHNOLOGY CO., LTD. NO. PQ30-101EN Product Specification and Approval Sheet Version 9 Page 1/3 NOTE : Specification subject to change without notice. 2016/11/8 Axial Leaded Low Rho PTC Resettable Fuse: FSL-N Series 1. Summary (a) RoHS Compliant & Halogen Free (b) Applications: Laptop Computer, Mobile phone battery packs, Rechargeable battery packs, Lithium cell and battery packs (c) Product Features: Low resistance, Solid state (d) Operation Current: 1.4~7.0A (e) Maximum Voltage: 6VDC (f) Temperature Range : -40℃ to 85℃ 2. Agency Recognition UL: File No. E211981 C-UL: File No. E211981 TÜ V: File No. R50004084 3. Electrical Characteristics (23℃) Part Number Hold Current Trip Current Rated Voltage Maximum Current Typical Power Max Time to Trip Resistance Tolerance Current Time RMIN RMAX R1MAX IH,A IT,A VMAX, VDC IMAX, A Pd, W A Sec Ohms Ohms Ohms IH=Hold current-maximum current at which the device will not trip at 23℃ still air. IT=Trip current-minimum current at which the device will always trip at 23℃ still air. V MAX=Maximum voltage device can withstand without damage at its rated current. I MAX= Maximum fault current device can withstand without damage at rated voltage (V MAX). Pd=Maximum power dissipated from device when in tripped state in 23℃ still air environment. RMIN=Minimum device resistance at 23℃. RMAX=Maximum device resistance at 23℃. R1MAX = 1) Maximum resistance of device at 23℃ measured 1 hour, after tripping for all product series; 2) or after REFLOW soldering of 260℃ for 20 ~ 40 seconds for all SMD series; 3) or after WAVE soldering of 260℃ for less than 5 seconds for all DIP series. Special Note : - In the event that TWO of the above three conditions were experienced once each,the acceptance criteria will become 1.3 times of R1MAX. - In the event that ALL of the above three conditions were experienced once each, the acceptance criteria will become 1.5 times of R1MAX. Physical specifications: Lead material: 0.1 mm nominal thickness, quarter-hard nickel. Insulating material: Epoxy.
FUZETEC TECHNOLOGY CO., LTD. NO. PQ30-101EN Product Specification and Approval Sheet Version 9 Page 2/3 NOTE : Specification subject to change without notice. 2016/11/8 4. Production Dimensions (millimeter) Part Number A B C D E F Min Max Min Max Min Max Min Max Min Max Min Max 5. Thermal Derating Curve 50% 100% 150% 200% -40 -20 0 20 40 60 80 Precent of Rated Hold and Trip Current Ambient Temperature (℃) FSL-N Series
FUZETEC TECHNOLOGY CO., LTD. NO. PQ30-101EN Product Specification and Approval Sheet Version 9 Page 3/3 NOTE : Specification subject to change without notice. 2016/11/8 6. Typical Time-To-Trip at 23℃ 7. Material Specification Lead material: 0.1 mm nominal thickness, quarter-hard nickel Insulating material:Epoxy 8. Part Numbering and Marking System Part Numbering System Warning: -Operation beyond the specified maximum ratings or improper use may result in damage and possible electrical arcing and/or flame. -PPTC device are intended for occasional overcurrent protection. Application for repeated overcurrent condition and/or prolonged trip are not anticipated. - Avoid contact of PPTC device with chemical solvent. Prolonged contact will damage the device performance. A = FSL140F-N B = FSL190F-N C = FSL250F-N / FSL270F-N D = FSL310F-N E = FSL370F-N F = FSL450LF-N G = FSL500F-N H = FSL700F-N RoHS Compliant/ Lead Free Special Coating Current Rating Long Lead Type 0.001 0.01 0.1 1 10 100 Time-to-trip (S) Fault Current (A) A B C DEF G H