FSHPLC CYNERGY3 | Alldatasheet
Document overview
- Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
- PDF pages: 2
Technical content
www.cynergy3.com © 2014 Cynergy3 Components, All Rights Reserved. Specifications are subject to change without prior notice. Cynergy3 Components and the Cynergy3 Components logo are trademarks of Cynergy3 Components Limited. ISO9001CERTIFIED FSHPLC Flow switch for connection to PLC Cynergy3 Components Ltd.
7 Cobham Road
Ferndown Industrial Estate Wimborne, Dorset BH21 7PE Telephone +44 (0) 1202 897969 Email:sales@cynergy3.com The FSHPLC other equipment or process via a PLC. It could be for controlling a circulating or centrifugal electric pump that is providing increased pressure or flow within water systems with storage tanks. The FSHPLC switches the output, once the flow rate through the pipe exceeds 20 l/min. A flow of less than 20 l/min, whether due to a lack of supply (e.g. tank empty) or to a decrease in demand(e.g. tap closing), will turn the output off again. can be used to control some Automatic shut down on flow stop 1”BSP pipe connections Signal level output for PLC 20 l/min turn on flow rate Volt free contact for output to PLC Technical Specification Screw mount Material Brass Enclosure material Polyamide Enclosure rating IP54 Start up flow rate Q. min l/min 20 Max Pressure P max bar 10 Max Temperature T max C 100 Pipe connections BSP 1” Electrical Specification Output SPNO volt free contact Max voltage Vac <5 Switching Current Max mA <1 Standard Parts On flow rate FSH10PLC 20 l/min 113
G1” mounting thread G1” - G4” pipe size G1” socket connection “o” ring seal “o” ring seal Adaptor ring Flow Direction Installation information The flow switch is designed to be used in a horizontal pipe with the switch mounted through a side entry. Pipe connection is G1” (1”BSP). The device relies on the flow of liquid working in opposition to the spring loaded paddle. The liquid flow moves the paddle within the pipe, when the flow increases beyond the minimum specified level. A magnet mounted on the head of the paddle closes a magnetic switch in the control circuit. The output switch will open, if the flow drops below the specified level and the paddle has returned to the rest position. The output is a SPNO switch with contacts rated to 1mA/5Vac. FSHPLC www.cynergy3.com © 2012 Cynergy3 Components, All Rights Reserved. Specifications are subject to change without prior notice. Cynergy3 Components and the Cynergy3 Components logo are trademarks of Cynergy3 Components Limited. ISO9001CERTIFIED Cynergy3 Components Ltd. Ferndown Industrial Estate Wimborne, Dorset BH21 7PE Telephone +44 (0) 1202 897969 Email:sales@cynergy3.com Flow switch for connection to PLC