FSDM311A FAIRCHILD | Alldatasheet
Document overview
- Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
- PDF pages: 12
Technical content
Features
Internal Avalanche-Rugged SenseFET Precision Fixed Operating Frequency: 67KHz Consumes Under 0.2W at 265VAC & No Load with Advanced Burst-Mode Operation Internal Start-up Circuit Pulse-by-Pulse Current Limiting Over-Voltage Protection (OVP) Overload Protection (OLP) Internal Thermal Shutdown Function (TSD) Auto-Restart Mode Under-Voltage Lockout (UVLO) with Hysteresis Built-in Soft-Start Secondary-Side Regulation
Applications
Charger & Adapter for Mobile Phone, PDA, & MP3 Auxiliary Power for White Goods, PC, C-TV, & Monitors
Description
The FSDM311A consists of an integrated Pulse Width Modulator (PWM) and SenseFET, and is specifically designed for high-performance, off-line, Switch-Mode Power Supplies (SMPS) with minimal external components. This device is an integrated high-voltage power switching regulator that combines a VDMOS SenseFET with a voltage-mode PWM control block. The integrated PWM controller features include a fixed oscillator, Under-Voltage Lockout (UVLO) protection, Leading-Edge Blanking (LEB), an optimized gate turn- on/turn-off driver, Thermal Shutdown (TSD) protection, and temperature-compensat ed precision-current sources for loop compensation and fault protection circuitry. When compared to a discrete MOSFET and controller or RCC switching converter solution, the FSDM311A device reduces total component count and design size and weight, while increasing efficiency, productivity, and system reliability. This device provides a basic platform that is well suited for the design of cost-effective flyback converters. Related Resources AN-4134: Design Guidelines for Off-line Forward Converters Using Fairchild Power Switch (FPS™) AN-4137: Design Guidelines for Off-line Flyback Converters Using Fairchild Power Switch (FPS™) AN-4138: Design Considerations for Battery Charger Using Green Mode Fairchild Power Switch (FPS™) AN-4140: Transformer Design Consideration for Off- line Flyback Converters Using Fairchild Power Switch (FPS™) AN-4141: Troubleshooting and Design Tips for Fairchild Power Switch (FPS™) Flyback Applications AN-4147: Design Guidelines for RCD Snubber of Flyback AN-4148: Audible Noise Reduction Techniques for FPS™ Applications
Ordering Information
Product Number Package Marking Code BV DSS f OSC R DS(ON) FSDM311A 8DIP DM311A 650V 67KHz 14Ω All packages are lead free per JEDEC: J-STD-020B standard. FPS™ is a trademark of Fairchild Semiconductor Corporation.
Figure 3. 8-Lead DIP Pin Assignments (Top View) 1 GND Ground. SenseFET source terminal on primary side and internal control ground.
2 Vcc
start-up switch opens and device power is supplied via the auxiliary transformer winding.
3 Vfb
conditions, but allows the protection mechani sm to operate under true overload conditions.
5 Vstr
connecting these pins to the transform er to decrease leakage inductance.
© 2007 Fairchild Semiconductor Corporation www.fairchildsemi.com FSDM311A • Rev.1.0.2 4 FSDM311A — Green Mode Fairchild Power Switch (FPSTM) Absolute Maximum Ratings Stresses exceeding the absolute maximum ratings may damage the device. The device may not function or be operable above the recommended operating conditions and stressing the parts to these levels is not recommended. In addition, extended exposure to stresses above the recommended operating conditions may affect device reliability. The absolute maximum ratings are stress ratings only. T A=25°C, unless otherwise specified. Symbol Parameter Value Unit VDRAIN Drain Pin Voltage 650 V VSTR Vstr Pin Voltage 650 V VDG Drain-Gate Voltage 650 V VGS Gate-Source Voltage ±20 V IDM Drain Current Pulsed (3) 1.5 A ID Continuous Drain Current (T C=25°C) 0.5 A ID Continuous Drain Current (T C=100°C) 0.32 A EAS Single Pulsed Avalanche Energy (4) 10 mJ VCC Supply Voltage 20 V VFB Feedback Voltage Range -0.3 to V STOP V PD Total Power Dissipation 1.40 W TJ Operating Junction Temperature Internally limited °C TA Operating Ambient Temperature -25 to +85 °C TSTG Storage Temperature -55 to +150 °C Notes: 3. Repetitive rating: Pulse width is limited by maximum junction temperature. 4. L = 24mH, starting T J = 25°C Thermal Impedance TA=25°C, unless otherwise specified. Symbol Parameter Value Unit 8DIP θJA Junction-to-Ambient Thermal Impedance (5) 88.84 °C/W θJC Junction-to-Case Thermal Impedance (6) 13.94 °C/W Notes: 5. Free standing with no heatsink; without copper clad. (M easurement Condition – just before junction temperature TJ enters into OTP). 6. Measured on the DRAIN pin close to plastic interface. 7. All items are tested with the standards JESD 51-2 and 51-10 (DIP).
© 2007 Fairchild Semiconductor Corporation www.fairchildsemi.com FSDM311A • Rev.1.0.2 5 FSDM311A — Green Mode Fairchild Power Switch (FPSTM)
Electrical Characteristics
TA=25°C unless otherwise specified. Symbol Parameter Conditions Min. Typ. Max. Unit SENSEFET SECTION VDS=650V, VGS=0V 25 IDSS Zero-Gate-Voltage Drain Current VDS=520V, VGS=0V, TC=125°C 200 mA RDS(ON) Drain-Source On-State Resistance (8) V GS=10V, ID=0.5A 14 19 Ω gfs Forward Trans-Conductance V DS=50V, ID=0.5A 1.0 1.3 S CISS Input Capacitance 162 COSS Output Capacitance 18 CRSS Reverse Transfer Capacitance VGS=0V, VDS=25V, f=1MHz 3.8 pF td(on) Turn-On Delay Time 9.5 tr Rise Time 19 td(off) Turn-Off Delay Time 33 tf Fall Time VDS=325V, ID=1.0A ns Qg Total Gate Charge 7.0 Qgs Gate-Source Charge 3.1 Qgd Gate-Drain (Miller) Charge VGS=10V, ID=1.0A, VDS=325V 0.4 nC CONTROL SECTION fOSC Switching Frequency 61 67 73 KHz ΔfOSC Switching Frequency Variation (9) -25°C ≤ TA ≤ 85°C ±5 ±10 % DMAX Maximum Duty Cycle 60 67 74 % VSTART V FB=GND 8 9 10 V VSTOP UVLO Threshold Voltage VFB=GND 6 7 8 V IFB Feedback Source Current 0V ≤ VFB ≤ 3V 0.35 0.40 0.45 mA tS/S Internal Soft-Start Time 10 15 20 ms VREF Reference Voltage (10) 4.2 4.5 4.8 V ΔVREF/ΔT Reference Voltage Variation with Temperature(9, 10) -25°C ≤ TA ≤ 85°C 0.3 0.6 mV/°C BURST MODE SECTION VBURH 0.6 0.7 0.8 V VBURL TJ=25°C 0.45 0.55 0.65 V VBUR(HYS) Burst Mode Voltage Hysteresis 150 mV PROTECTION SECTION ILIM Peak Current Limit di/dt=90mA/µs 0.500 0.575 0.650 A TSD Thermal Shutdown Temperature (10) 125 145 °C VSD Shutdown Feedback Voltage 4.0 4.5 5.0 V VOVP Over-Voltage Protection 20 V IDELAY Shutdown Delay Current 3V ≤ VFB ≤ VSD 4 5 6 µA TOTAL DEVICE SECTION IOP Operating Supply Current (control part only) VCC ≤ 16V 1.5 3.0 mA ICH Start-up Charging Current V CC=0V, VSTR=50V 450 550 650 µA Notes: 8. Pulse test: Pulse width ≤ 300µs, duty ≤ 2%. 9. These parameters, although guaranteed, are tested in EDS (wafer test) process. 10. These parameters, although guaranteed, are not 100% tested in production.
4.1 Overload Protection (OLP): Overload is defined as
from 3V to 4.5V with 5µA current source. Figure 19. Overload Protection (OLP)
4.2 Thermal Shutdown (TSD): The SenseFET and the
- Soft-Start: The FPS has an internal soft-start circuit
Figure 20. Internal Soft-Start
- Burst Operation: To minimize the power dissipation
start to drop. This causes the feedback voltage to rise. BURH (0.70V), switching starts again. The feedback voltage falls and the process repeats. Figure 21. Burst Operation Block Figure 22. Burst Operation Function
5.08 MAX
0.33 MIN
B) ALL DIMENSIONS ARE IN MILLIMETERS. MOLD FLASH, AND TIE BAR EXTRUSIONS. E) DRAWING FILENAME AND REVSION: MKT-N08FREV2. Figure 25. 8-Lead DIP Package
© 2007 Fairchild Semiconductor Corporation www.fairchildsemi.com FSDM311A • Rev.1.0.2 12 FSDM311A — Green Mode Fairchild Power Switch (FPSTM)