FSGM0465R ONSEMI | Alldatasheet
Document overview
- Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
- PDF pages: 18
Technical content
Features
- Soft Burst−Mode Operation for Low Standby Power Consumption and Low Noise
- Precision Fixed Operating Frequency: 66 kHz
- Pulse−by−Pulse Current Limit
- Various Protection Functions: Overload Protection (OLP), Over−V oltage Protection (OVP), Abnormal Over−Current Protection (AOCP), Internal Thermal Shutdown (TSD) with Hysteresis, Output−Short Protection (OSP), and Under−V oltage Lockout (UVLO) with Hysteresis
- Auto−Restart Mode
- Internal Startup Circuit
- Internal High−V oltage SENSEFET: 650 V
- Built−in Soft−Start: 15 ms
- These are Pb−Free Devices
Applications
- Power Supply for LCD TV and Monitor, STB and DVD Combination Related Resources
- Power Supply WebDesigner — Flyback Design & Simulation − In Minutes at No Expense www.onsemi.com TO−220−6LD LF CASE 340BG MARKING DIAGRAM $Y = ON Semiconductor Logo &Z = Assembly Plant Code &3 = 3 −Digit Date Code Format &K = 2 −Digit Lot Run Tracebility Code GM0465R = Specific Device Code Data See detailed ordering and shipping information on page 2 of this data sheet.
ORDERING INFORMATION
$Y&Z&3&K GM0465R TO−220 FULLPAK 6LD LF CASE 340BP
www.onsemi.com Temperature Current Limit RDS(ON) (Max.) Output Power Table (Note 2) Replaces Device Shipping 230VAC /C0043 15% (Note 3) 85 − 265 VAC Adapter (Note 4) Open Frame (Note 5) Adapter (Note 4) Open Frame (Note 5) FSGM0465RWDTU TO−220F 6−Lead (Note 1) W−Forming −40°C ~ +125°C 1.80 A 2.6 /C0087 60 W 70 W 33 W 48 W FSDM0465RE 400 / Tube FSGM0465RUDTU TO−220F 6−Lead (Note 1) U−Forming −40°C ~ +125°C 1.80 A 2.6 /C0087 60 W 70 W 33 W 48 W FSDM0465RE FSGM0465RLDTU TO−220F 6−Lead (Note 1) L−Forming −40°C ~ +125°C 1.80 A 2.6 /C0087 60 W 70 W 33 W 48 W FSDM0465RE 1. Pb −free package per JEDEC J−STD−020B. 2. The junction temperature can limit the maximum output power. 3. 230 V AC or 100 / 115 VAC with voltage doubler. 4. Typical continuous power in a non −ventilated enclosed adapter measured at 50°C ambient temperature. 5. Maximum practical continuous power in an open −frame design at 50°C ambient temperature. Application Circuit Figure 1. Typical Application Circuit
SENSEFET Drain. High−voltage power SENSEFET drain connection. Ground. This pin is the control ground and the SENSEFET source. GND. If the voltage of this pin reaches 6 V, the overload protection triggers, which shuts down the power switch. high−voltage current source supplies internal bias and charges the external capacitor connected to the VCC pin. Once VCC reaches 12 V, the internal current source (ICH) is disabled. should not be assumed, damage may occur and reliability may be affected.
- Repetitive peak switching current when the inductive load is assumed: Limited by maximum duty (D
- Infinite cooling condition (refer to the SEMI G30−88).
- Although this parameter guarantees IC operation, it does not guarantee all electrical characteristics.
10.The voltage between the package back side and the lead is guaranteed. Figure 4. Repetitive Peak Switching Current
www.onsemi.com THERMAL CHARACTERISTICS Symbol Characteristic Value Unit /C0113JA Junction−to−Ambient Thermal Impedance (Note 11) 62.5 °C/W /C0113JC Junction−to−Case Thermal Impedance (Note 12) 3 °C/W 11. Infinite cooling condition (refer to the SEMI G30−88). 12.Free standing with no heat−sink under natural convection. ELECTRICAL CHARACTERISTICS (TJ = 25°C unless otherwise noted) Symbol Parameter Test Condition Min Typ Max Unit SENSEFET SECTION BVDSS Drain−Source Breakdown Voltage VCC = 0 V, ID = 250 /C0109A 650 − − V IDSS Zero−Gate−Voltage Drain Current VDS = 520 V, TA = 125°C − − 250 /C0109A RDS(ON) Drain−Source On−State Resistance VGS = 10 V, ID = 1 A − 2.1 2.6 /C0087 CISS Input Capacitance (Note 13) VDS = 25 V, VGS = 0 V, f = 1MHz − 436 − pF COSS Output Capacitance (Note 13) VDS = 25 V, VGS = 0 V, f = 1MHz − 65 − pF tr Rise Time VDS = 325 V, ID = 4 A, RG = 25 /C0087 − 24 − ns tf Fall Time VDS = 325 V, ID = 4 A, RG = 25 /C0087 − 24 − ns td(on) Turn−on Delay Time VDS = 325 V, ID = 4 A, RG = 25 /C0087 − 13 − ns td(off) Turn−off Delay Time VDS = 325 V, ID = 4 A, RG = 25 /C0087 − 30 − ns CONTROL SECTION fS Switching Frequency VCC = 14 V, VFB = 4 V 60 66 72 kHz /C0068fS Switching Frequency Variation (Note 13) −25°C < TJ < +125°C − ±5 ±10 % DMAX Maximum Duty Ratio VCC = 14 V, VFB = 4 V 65 70 75 % DMIN Minimum Duty Ratio VCC = 14 V, VFB = 0 V − − 0 % IFB Feedback Source Current VFB = 0 160 210 260 /C0109A VSTART UVLO Threshold Voltage VFB = 0 V, VCC Sweep 11 12 13 V VSTOP After Turn−on, VFB = 0 V 7.0 7.5 8.0 V VOP VCC Operating Range 13 − 23 V tS/S Internal Soft−Start Time VSTR = 40 V, VCC Sweep − 15 − ms BURST−MODE SECTION VBURH Burst−Mode Voltage VCC = 14 V, VFB Sweep 0.6 0.7 0.8 V VBURL 0.4 0.5 0.6 V Hys − 200 − mV PROTECTION SECTION ILIM Peak Drain Current Limit di/dt = 300 mA//C0109s 1.64 1.80 1.96 A VSD Shutdown Feedback Voltage VCC = 14 V, VFB Sweep 5.5 6.0 6.5 V IDELAY Shutdown Delay Current VCC = 14 V, VFB = 4 V 2.5 3.3 4.1 /C0109A Hys Leading−Edge Blanking Time (Note 13, 14) − 300 − ns VOVP Over−Voltage Protection VCC Sweep 23.0 24.5 26.0 V
performance may not be indicated by the Electrical Characteristics if operated under different conditions. 13.Although these parameters are guaranteed, they are not 100% tested in production. LEB includes gate turn−on time. Table 1. COMPARISON OF FSDM0465RE AND FSGM0465R
(CVcc) connected to the VCC pin, as illustrated in Figure 17. unless VCC goes below the stop voltage of 7.5 V .
7.5 V / 12 V
Figure 17. Startup Block together with the SENSEFET current, slowly after it starts. Figure 18. An opto−coupler (such as the FOD817) and shunt voltage is increased or the output load is decreased. FB*), as shown in Figure 18. voltage of the cathode of D2 is clamped at this voltage. (300 ns) after the SENSEFET is turned on. Figure 18. Pulse Width Modulation Circuit
www.onsemi.com Winding Specification Table 3. WINDING SPECIFICATION
Electrical Characteristics
Table 4. ELECTRICAL CHARACTERISTICS
- Core: EER3019 (Ae = 134.0 mm2) • Bobbin: EER3019
Table 5. Bill of Materials SENSEFET is registered trademark of Semiconductor Components Industries, LLC (SCILLC) or its subsidiaries in the United States and/or other countries.
TO−220−6LD LF CASE 340BG ISSUE O DATE 31 AUG 2016 MECHANICAL CASE OUTLINE PACKAGE DIMENSIONS ON Semiconductor and are trademarks of Semiconductor Components Industries, LLC dba ON Semiconductor or its subsidiaries in the United States and/or other countries. ON Semiconductor reserves the right to make changes without further notice to any products herein. ON Semiconductor makes no warranty, representation or guarantee regarding the suitability of its products for any particular purpose, nor does ON Semiconductor assume any liability arising out of the application or use of any product or circuit, and specifically disclaims any and all liability, including without limitation special, consequential or incidental damages. ON Semiconductor does not convey any license under its patent rights nor the rights of others. 98AON13840GDOCUMENT NUMBER: DESCRIPTION: Electronic versions are uncontrolled except when accessed directly from the Document Repository. Printed versions are uncontrolled except when stamped “CONTROLLED COPY” in red. PAGE 1 OF 1TO−220−6LD LF © Semiconductor Components Industries, LLC, 2019 www.onsemi.com
TO−220 FULLPAK 6LD LF CASE 340BP ISSUE O DATE 31 AUG 2016 MECHANICAL CASE OUTLINE PACKAGE DIMENSIONS http://onsemi.com © Semiconductor Components Industries, LLC, 2002 October, 2002 − Rev. 0 Case Outline Number: XXX DOCUMENT NUMBER: STATUS: NEW STANDARD: DESCRIPTION: 98AON13848G ON SEMICONDUCTOR STANDARD TO−220 FULLPAK 6LD LF Electronic versions are uncontrolled except when accessed directly from the Document Repository. Printed versions are uncontrolled except when stamped “CONTROLLED COPY” in red. PAGE 1 OF 2
DOCUMENT7NUMBER: 98AON13848G PAGE 2 OF 2 ISSUE REVISION DATE O RELEASED FOR PRODUCTION FROM FAIRCHILD TO220F06 TO ON SEMICON- DUCTOR. REQ. BY B. NG.
31 AUG 2016
© Semiconductor Components Industries, LLC, 2016 August, 2016 − Rev. O Case Outline Number: 340BP ON Semiconductor and are registered trademarks of Semiconductor Components Industries, LLC (SCILLC). SCILLC reserves the right to make changes without further notice to any products herein. SCILLC makes no warranty, representation or guarantee regarding the suitability of its products for any particular purpose, nor does SCILLC assume any liability arising out of the application or use of any product or circuit, and specifically disclaims any and all liability, including without limitation special, consequential or incidental damages. “Typical” parameters which may be provided in SCILLC data sheets and/or specifications can and do vary in different applications and actual performance may vary over time. All operating parameters, including “Typicals” must be validated for each customer application by customer’s technical experts. SCILLC does not convey any license under its patent rights nor the rights of others. SCILLC products are not designed, intended, or authorized for use as components in systems intended for surgical implant into the body, or other applications intended to support or sustain life, or for any other application in which the failure of the SCILLC product could create a situation where personal injury or death may occur. Should Buyer purchase or use SCILLC products for any such unintended or unauthorized application, Buyer shall indemnify and hold SCILLC and its officers, employees, subsidiaries, affiliates, and distributors harmless against all claims, costs, damages, and expenses, and reasonable attorney fees arising out of, direct ly or indirectly, any claim of personal injury or death associated with such unintended or unauthorized use, even if such claim alleges that SCILLC was negligent regarding the design or manufacture of the part. SCILLC is an Equal Opportunity/Affirmative Action Employer. This literature is subject to all applicable copyright laws and is not for resale in any manner.
www.onsemi.com ON Semiconductor and are trademarks of Semiconductor Components Industries, LLC dba ON Semiconductor or its subsidiaries i n the United States and/or other countries. ON Semiconductor owns the rights to a number of patents, trademarks, copyrights, trade secrets, and other intellectual property . A listing of ON Semiconductor’s product/patent ON Semiconductor makes no warranty, representation or guarantee regarding the suitability of its products for any particular purpose, nor does ON Semiconductor assume any liability arising out of the application or use of any product or circuit, and specifically disclaims any and all liability, including without limitation special, consequential or incidental damages. Buyer is responsible for its products and applications using ON Semiconductor products, including compliance with all laws, reg ulations and safety requirements or standards, regardless of any support or applications information provided by ON Semiconductor. “Typical” parameters which may be provided in ON Semiconductor data sheets and/or specifications can and do vary in different applications and actual performance may vary over time. All operating parameters, including “Typicals” must be validated for each customer application by customer’s technical experts. ON Semiconductor does not convey any license under its patent rights nor the right s of others. ON Semiconductor products are not designed, intended, or authorized for use as a critical component in life support systems or any FDA Class 3 medical devices or medical devices with a same or similar classification in a foreign jurisdiction or any devices intended for implantation in the human body. Should Buyer purchase or use ON Semiconductor products for any such unintended or unauthorized application, Buyer shall indemnify and hold ON Semiconductor and its officers, employees, subsidiaries, affiliates, and distributors harmless against all claims, costs, damages, and expenses, and reasonable attorney fees arising out of, directly or indirectly, any claim of personal injury or death associated with such unintended or unauthorized use, even if such claim alleges that ON Semiconductor was negligent regarding the design or manufacture of the part. ON Semiconductor is an Equal Opportunity/Affirmative Action Employer. This literature is subject to all applicable copyright laws and is not for resale in any manner. PUBLICATION ORDERING INFORMATION TECHNICAL SUPPORT North American Technical Support: Voice Mail: 1 800−282−9855 Toll Free USA/Canada Phone: 011 421 33 790 2910 LITERATURE FULFILLMENT: Email Requests to: orderlit@onsemi.com ON Semiconductor Website: www.onsemi.com Europe, Middle East and Africa Technical Support: Phone: 00421 33 790 2910 For additional information, please contact your local Sales Representative