FSCL SENSATA | Alldatasheet

Document overview

  • Manufacturer or author: Provided By alldatasheet.com(free datasheet download site)
  • PDF pages: 2

Technical content

Features

  • Mandatory stop at MAX with push button override to go to Emergency position
  • 4-Channel RVDT position feedback
  • Locked stow
  • Emergency position gated to prevent inadvertent movement
  • 9 soft detents
  • LED illuminated panel (LRU)
  • Simple 4-screw mount permits rapid line replacement with minimal tools. Kavlico’s Flight Spoiler Control Lever (FSCL) meets the small envelope, minimum weight, and high reliability demanded by today’s aerospace industry. The design of the FSCL contains many features common to Kavlico’s overall line of pilot control products. The FSCL’s high reliability and durability have been verified through extensive qualification and endurance testing. The lever is locked in the stow position. Once the button is depressed on the handle, the lever can be released from the stow position. As the lever moves, the output signals from the RVDTs change continuously. These signals are processed in the override to go to Emergency position flight control computer and the spoilers move to the commanded position (1/4, 1/2, 3/4, Max and Emer). Four single channel RVDTs are connected to a lever through a geared mechanism, command signals generated are sent via two MIL-DTL-D38999, Series III connectors to the on board avionic system. Six Positions 5 positions and 1 gated position Stow Locked position, depress button to go out of stow Operating Force 2.5 to 5 lbs. (11 to 22N) Mechanical Travel 48 degrees Angled Handle White semi-gloss, color 27875 per FED-STD-595 Light Panel Light panel per Mii-P-7788, class 2-BW, SAE 7788, Type VII (LED), 5VDC Electrical Receptacles MIL-DTL-D38999 Connectors, Series III

www.sensata.com CONTACT US Americas +1 (805) 716-0322 info.kavlico@sensata.com Copyright © 2018 Sensata Technologies, Inc. Sensata Technologies, Inc. (“Sensata”) data sheets are solely intended to assist designers (“Buyers”) who are developing systems that incorporate Sensata products (also referred to herein as “components”). Buyer understands and agrees that Buyer remains responsible for using its independent analysis, evaluation and judgment in designing Buyer’s systems and products. Sensata data sheets have been created using standard laboratory conditions and engineering practices. Sensata has not conducted any testing other than that specifically described in the published documentation for a particular data sheet. Sensata may make corrections, enhancements, improvements and other changes to its data sheets or components without notice. Buyers are authorized to use Sensata data sheets with the Sensata component(s) identified in each particular data sheet. HOWEVER, NO OTHER LICENSE, EXPRESS OR IMPLIED, BY ESTOPPEL OR OTHERWISE TO ANY OTHER SENSATA INTELLECTUAL PROPERTY RIGHT, AND NO LICENSE TO ANY THIRD PARTY TECHNOLOGY OR INTELLECTUAL PROPERTY RIGHT, IS GRANTED HEREIN. SENSATA DATA SHEETS ARE PROVIDED “AS IS”. SENSATA MAKES NO WARRANTIES OR REPRESENTATIONS WITH REGARD TO THE DATA SHEETS OR USE OF THE DATA SHEETS, EXPRESS, IMPLIED OR STATUTORY , INCLUDING ACCURACY OR COMPLETENESS. SENSATA DISCLAIMS ANY WARRANTY OF TITLE AND ANY IMPLIED WARRANTIES OF MERCHANTABILITY , FITNESS FOR A PARTICULAR PURPOSE, QUIET ENJOYMENT, QUIET POSSESSION, AND NON-INFRINGEMENT OF ANY THIRD PARTY INTELLECTUAL PROPERTY RIGHTS WITH REGARD TO SENSATA DATA SHEETS OR USE THEREOF. All products are sold subject to Sensata’s terms and conditions of sale supplied at www.sensata.com SENSATA ASSUMES NO LIABILITY FOR APPLICATIONS ASSISTANCE OR THE DESIGN OF BUYERS’ PRODUCTS. BUYER ACKNOWLEDGES AND AGREES THAT IT IS SOLELY RESPONSIBLE FOR COMPLIANCE WITH ALL LEGAL, REGULATORY AND SAFETY-RELATED REQUIREMENTS CONCERNING ITS PRODUCTS, AND ANY USE OF SENSATA COMPONENTS IN ITS APPLICATIONS, NOTWITHSTANDING ANY APPLICATIONS-RELATED INFORMATION OR SUPPORT THAT MAY BE PROVIDED BY SENSATA. Mailing Address: Sensata Technologies, Inc., 529 Pleasant Street, Attleboro, MA 02703, USA. Revised 2/16/18 Dimensions in mm [Inch] DIMENSIONS Cut Out Dimensions Schematics