FSAV450QSCX FAIRCHILD | Alldatasheet

Document overview

  • Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
  • PDF pages: 12

Technical content

Features

/c79 /c16 50dB OFF Isolation at 30MHz /c79 /c16 80dB non-adjacent channel crosstalk at 30MHz /c79 4/c58 typical On Resistance (RON) /c79 /c16 3dB bandwidth: 800MHz /c79 Low power consumption (1uA max) /c79 Control input: TTL compatible

Applications

/c79 RGB Video Switch in LCD, plasma and projector displays Ordering Code: Devices also available in Tape and Reel. Specify by appending suffix letter “X” to the ordering code. Pb-Free package per JEDEC J-STD-020B. Note 1: DQFN package available in Tape and Reel only. Order Package Package DescriptionNumber Number FSAV450BQX (Note 1) MLP016E Pb-Free 16-Terminal Depopulated Quad Very-Thin Flat Pack No Leads (DQFN), JEDEC MO-241, 2.5 x 3.5mm FSAV450QSC MQA16A 16-Lead Quarter Size Outline Package (QSOP), JEDEC MO-137, 0.150 Wide FSAV450MTC MTC16 16-Lead Thin Shrink Small Outline Package (TSSOP), JEDEC MO-153, 4.4mm Wide

www.fairchildsemi.com 2 FSAV450 Analog Symbol Pin Descriptions Connection Diagrams Pin Assignments for QSOP and TSSOP Pad Assignments for DQFN (Preliminary) Truth Table Pin Name Description OE Bus Switch Enable S Select Input AB u s A B1–B2 Bus B SO E Function X H Disconnect LL A = B 1 HL A = B 2

3 www.fairchildsemi.com FSAV450 Absolute Maximum Ratings(Note 2) Recommended Operating Conditions (Note 4) Note 2: The Absolute Maximum Ratings are those values beyond which the safety of the device cannot be guaranteed. The device should not be operated at these limits. The parametric values defined in the Electrical Characteristics tables are not guaran- teed at the absolute maximum rating. The Recommended Operating Conditions tables will define the conditions for actual device operation. Note 3: The input and output negative voltage ratings may be exceeded if the input and output diode current ratings are observed. Note 4: Unused control inputs must be held HIGH or LOW. They may not float. Note 5: Typical values are at TA = /c14 25/c113 C Note 6: Measured by the voltage drop between A and B pins at the indicated current through the switch. On Resistance is determined by the lower of the voltages on the two (A or B) pins. Supply Voltage (VCC) /c16 0.5V to /c14 6.0V DC Switch Voltage (VS) /c16 0.5V to /c14 6.0V DC Input Voltage (VIN) (Note 3) /c16 0.5V to /c14 6.0V DC Input Diode Current (lIK) VIN /c31 0V /c16 50 mA DC Output (IOUT) Sink Current 128 mA DC VCC/GND Current (ICC/IGND) /c114 100 mA Storage Temperature Range (TSTG) /c16 65/c113 C to /c14 150 /c113 C ESD Human Body Model 2kV Power Supply Operating (VCC) 4.5V to 5.5V Input Voltage (VIN)0 V t o V CC Output Voltage (VOUT)0 V t o V CC Input Rise and Fall Time (tr, tf) Switch Control Input 0 ns/V to 5 ns/V Switch I/O 0 ns/V to DC Free Air Operating Temperature (TA) /c16 40 /c113 C to /c14 85 /c113 C Symbol Parameter VCC (V) TA = /c16 40 /c113 C to /c14 85 /c113 C Units ConditionsMin Typ (Note 5) Max Analog Signal Range 0 2.0 V VIK Clamp Diode Voltage 4.5 /c16 1.2 V I IN = /c16 18 mA VIH HIGH Level Input Voltage 4.5 to 5.5 2.0 V VIL LOW Level Input Voltage 4.5 to 5.5 0.8 V II Input Leakage Current 5.5 /c114 1.0 /c80 A0 /c100 VIN /c100 5.5V IOFF OFF-STATE Leakage Current 5.5 /c114 1.0 /c80 A0 /c100 A, B /c100 VCC RON Switch On Resistance 4.5 4.0 6.0 /c58 VIN = 1.0V (Note 6) RI = 75 /c58 , ION = 13 mA 4.5 5.0 7.0 /c58 VIN = 2.0V RI = 75 /c58 , ION = 26 mA ICC Quiescent Supply Current 5.5 1.0 /c80 AV IN = VCC or GND, IOUT = 0 /c39 ICC Increase in ICC per Input 5.5 1.5 mA One Input at 3.4V Other Inputs at VCC or GND

FIGURE 1. Gain vs. Frequency

www.fairchildsemi.com 8 FSAV450 Tape and Reel Specification TAPE FORMAT for DQFN TAPE DIMENSIONS inches (millimeters) REEL DIMENSIONS inches (millimeters) Package Tape Number Cavity Cover Tape Designator Section Cavities Status Status Leader (Start End) 125 (typ) Empty Sealed BQX Carrier 2500/3000 Filled Sealed Trailer (Hub End) 75 (typ) Empty Sealed T a p e S i z e ABCDN W 1 W 2 12 mm

9 www.fairchildsemi.com FSAV450 Physical Dimensions inches (millimeters) unless otherwise noted Pb-Free 16-Terminal Depopulated Quad Very-Thin Flat Pack No Leads (DQFN), JEDEC MO-241, 2.5 x 3.5mm

www.fairchildsemi.com 10 FSAV450 Physical Dimensions inches (millimeters) unless otherwise noted (Continued) 16-Lead Quarter Size Outline Package (QSOP), JEDEC MO-137, 0.150 Wide

11 www.fairchildsemi.com FSAV450 Physical Dimensions inches (millimeters) unless otherwise noted (Continued) 16-Lead Thin Shrink Small Outline Package (TSSOP), JEDEC MO-153, 4.4mm Wide Technology Description The Fairchild Switch family derives from and embodies Fairchild’s proven switch technology used for several years in its 74LVX3L384 (FST3384) bus switch product.

www.fairchildsemi.com 12 FSAV450 800MHz 4 Channel 2:1 Video Switch DISCLAIMER FAIRCHILD SEMICONDUCTOR RESERVES THE RIGHT TO MAKE CHANGES WITHOUT FURTHER NOTICE TO ANY PRODUCTS HEREIN TO IMPROVE RELIABILITY, FUNCTION OR DESIGN. FAIRCHILD DOES NOT ASSUME ANY LIABILITY ARISING OUT OF THE APPLICATION OR USE OF ANY PRODUCT OR CIRCUIT DESCRIBED HEREIN; NEITHER DOES IT CONVEY ANY LICENSE UNDER ITS PATENT RIGHTS, NOR THE RIGHTS OF OTHERS. LIFE SUPPORT POLICY FAIRCHILD’S PRODUCTS ARE NOT AUTHORIZED FOR USE AS CRITICAL COMPONENTS IN LIFE SUPPORT DEVICES OR SYSTEMS WITHOUT THE EXPRESS WRITTEN APPROVAL OF FAIRCHILD SEMICONDUCTOR CORPORATION As used herein: 1. Life support devices or s ystems are devices or systems which, (a) are intended for surgical implant into the body, or (b) support or sustain life, or (c) whose failure to perform when properly used in accordanc e with instructions for use provided in the labeling, can be reasonably expected to result in significant injury to the user. 2. A critical component is any component of a life support device or system whose failure to perform can be reason- ably expected to cause the failure of the life support device or system, or to affect its safety or effectiveness. PRODUCT STATUS DEFINITIONS Definition of terms Datasheet Identification Product Status Definition Advance Information Formative or In Design This datasheet contains the design specifications for product develop- ment. Specifications may change in any manner without notice. Preliminary First Production This datasheet contai ns preliminary data, and supplementary data will be published at a later date. Fairchild Semiconductor reserves the right to make changes at any time without notice in order to improve design. No Identification Needed Full Production This datasheet cont ains final specifications. Fairchild Semiconductor reserves the right to make changes at any time without notice in order to improve design. Obsolete Not In Production This datasheet contains specifications on a product that has been dis- continued by Fairchild Semiconductor. The datasheet is printed for ref- erence information only.