FSAV433 FAIRCHILD | Alldatasheet

Document overview

  • Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
  • PDF pages: 11

Technical content

Features

I Ground between channels to optimize isolation and hostile crosstalk I /c16 85dB non-adjacent channel crosstalk at 10MHz I 6.5/c58 typical On Resistance (RON ) I /c16 3dB bandwidth: 550MHz I Low power consumption (1uA max)

Applications

  • RGB Video Switch in LCD, plasma and projection displays  DVD-RW, notebook Ordering Code: Device also available in Tape and Reel. Specify by appending suffix letter “X” to the ordering code. Pb-Free package per JEDEC J-STD-020B. Note 1: DQFN package available in Tape and Reel only. Order Number Package Number Package Description FSAV433BQX (Preliminary) (Note 1) MLP020B Pb-Free 20-Terminal Depopulated Quad Very-Thin Flat Pack No Leads (DQFN), JEDEC MO-241, 2.5 x 4.5mm FSAV433MTC MTC20 20-Lead Thin Shrink Small Outline Package (TSSOP), JEDEC MO-153, 4.4mm Wide

www.fairchildsemi.com 2 FSAV433 Analog Symbol Pin Descriptions Truth Table Connection Diagrams Pin Assignments for TSSOP (Top Through View) Pad Assignments for DQFN (Top Through View) Pin Name Description OE Bus Switch Enable S1, S2 Select Input AB u s A B1–B3 Bus B S1 S2 Function L L Disconnect LH A /c32 B1 HL A /c32 B2 HH A /c32 B3

3 www.fairchildsemi.com FSAV433 Absolute Maximum Ratings(Note 2) Recommended Operating Conditions (Note 4) Note 2: The Absolute Maximum Ratings are those values beyond which the safety of the device cannot be guaranteed. The device should not be operated at these limits. The parametric values defined in the Electrical Characteristics tables are not guaranteed at the absolute maximum rating. The Recommended Operating Conditions tables will define the conditions for actual device operation. Note 3: The input and output negative voltage ratings may be exceeded if the input and output diode current ratings are observed. Note 4: Unused control inputs must be held HIGH or LOW. They may not float. Note 5: Typical values are at TA /c32 /c14 25/c113 C Note 6: Measured by the voltage drop between A and B pins at the indicated current through the switch. On Resistance is determined by the lower of the voltages on the two (A or B) pins. Supply Voltage (VCC ) /c16 0.5V to /c14 4.6V DC Switch Voltage (VS) /c16 0.5V to VCC /c14 0.05V DC Input Voltage (VIN) (Note 3) /c16 0.5V to /c14 4.6V DC Input Diode Current (lIK) VIN /c31 0V /c16 50 mA DC Output (IOUT ) Sink Current 100 mA DC V CC /GND Current (ICC /IGND ) /c114 100 mA Storage Temperature Range (TSTG ) /c16 65/c113 C to /c14 150 /c113 C ESD Human Body Model 7kV Power Supply Operating (VCC ) 2.3V to 3.6V Input Voltage (VIN) 0V to V CC Free Air Operating Temperature (TA) /c16 40 /c113 C to /c14 85 /c113 C Symbol Parameter VCC (V) TA /c32 /c16 40 /c113 C to /c14 85 /c113 C Units ConditionsMin Typ (Note 5) Max Analog Signal Range 0 2.0 V VIK Clamp Diode Voltage 3.0 /c16 1.2 V I IN /c32 /c16 18 mA VIH HIGH Level Input Voltage 2.3 1.8 V 3.0 - 3.6 2.0 VIL LOW Level Input Voltage 2.3 0.7 V 3.0 - 3.6 0.8 II Input Leakage Current 3.6 /c114 1.0 /c80 A0 /c100 VIN /c100 3.6V IOFF OFF-STATE Leakage Current 3.6 /c114 1.0 /c80 A0 /c100 A, B /c100 VCC , See Figure 5 R ON Switch On Resistance 2.3 9.0 13.0 /c58 VIN /c32 1.0V (Note 6) 3.0 6.5 9.0 I ON /c32 13 mA, See Figure 4 2.3 10.0 15.0 /c58 VIN /c32 2.0V 3.0 6.5 9.0 I ON /c32 26 mA, See Figure 4 ICC Quiescent Supply Current 3.6 1.0 /c80 AV IN /c32 VCC or GND, IOUT /c32 0 ICCT Increase in ICC per Control Input 3.6 10.0 uA One Control Input at 3.0V Other Inputs at VCC or GND

9 www.fairchildsemi.com FSAV433 Tape and Reel Specification Tape Format for DQFN TAPE DIMENSIONS inches (millimeters) REEL DIMENSIONS inches (millimeters) Package Tape Number Cavity Cover Tape Designator Section Cavities Status Status Leader (Start End) 125 (typ) Empty Sealed BQX Carrier 2500/3000 Filled Sealed Trailer (Hub End) 75 (typ) Empty Sealed T a p e S i z e ABCDN W 1 W 2

www.fairchildsemi.com 10 FSAV433 Physical Dimensions inches (millimeters) unless otherwise noted Pb-Free 20-Terminal Depopulated Quad Very-Thin Flat Pack No Leads (DQFN), JEDEC MO-241, 2.5 x 4.5mm

Physical Dimensions inches (millimeters) unless otherwise noted (Continued) 11 www.fairchildsemi.com FSAV433 Low Voltage Ultra Low Power High Bandwidth (550MHz) 3-Port 3:1 Video Switch Physical Dimensions inches (millimeters) unless otherwise noted (Continued) 20-Lead Thin Shrink Small Outline Package (TSSOP), JEDEC MO-153, 4.4mm Wide Technology Description The Fairchild Switch family derives from and embodies Fairchild’s proven switch technology used for several years in its 74LVX3L384 (FST3384) bus switch product. Fairchild does not assume any responsibility for use of any circuitry described, no circuit patent licenses are implied and Fairchild reserves the right at any time without notice to change said circuitry and specifications. LIFE SUPPORT POLICY FAIRCHILD ’S PRODUCTS ARE NOT AUTHORIZED FOR USE AS CRITICAL COMPONENTS IN LIFE SUPPORT DEVICES OR SYSTEMS WITHOUT THE EXPRESS WRITTEN APPROVAL OF THE PRESIDENT OF FAIRCHILD SEMICONDUCTOR CORPORATION. As used herein: 1. Life support devices or systems are devices or systems which, (a) are intended for surgical implant into the body, or (b) support or sustain life, and (c) whose failure to perform when properly used in accordance with instructions for use provided in the labeling, can be rea- sonably expected to result in a significant injury to the user. 2. A critical component in any component of a life support device or system whose failure to perform can be rea- sonably expected to cause the failure of the life support device or system, or to affect its safety or effectiveness. www.fairchildsemi.com