FSAV430 FAIRCHILD | Alldatasheet

Document overview

  • Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
  • PDF pages: 11

Technical content

Features

I −50dB OFF Isolation at 10MHz I −75dB non-adjacent channel crosstalk at 10MHz I 4.5Ω typical On Resistance (RON ) I −3dB bandwidth: 1.1GHz I Low power consumption (1uA max) I Control input: TTL compatible I Bidirectional operation

Applications

  • RGB Video Switch in LCD, plasma and projection displays D V D - R W Ordering Code: Devices also available in T ape and Reel. Specify by appending suffix letter “X” to the ordering code. Note 1: DQFN package available in Tape and Reel only. Order Number Package Number Package Description FSAV430BQX (Note 1) (Preliminary) MLP016E 16-Terminal Depopulated Quad Very-Thin Flat Pack No Leads (DQFN), JEDEC MO-241, 2.5 x 3.5mm FSAV430QSC MQA16 16-Lead Quarter Size Outline Package (QSOP), JEDEC MO-137, 0.150" Wide FSAV430MTC MTC16 16-Lead Thin Shrink Small Outline Package (TSSOP), JEDEC MO-153, 4.4mm Wide

www.fairchildsemi.com 2 FSAV430 Analog Symbol Pin Descriptions Connection Diagrams Pin Assignments for QSOP and TSSOP Pad Assignments for DQFN Truth Table Pin Name Description OE Bus Switch Enable S Select Input AB u s A B1–B2 Bus B SO E Function X H Disconnect LL A = B1 HL A = B2

3 www.fairchildsemi.com FSAV430 Absolute Maximum Ratings(Note 2) Recommended Operating Conditions (Note 4) Note 2: The Absolute Maximum Ratings are those values beyond which the safety of the device cannot be guaranteed. The device should not be operated at these limits. The parametric values defined in the Electrical Characteristics tables are not guaranteed at the absolute maximum rating. The Recommended Operating Conditions tables will define the conditions for actual device operation. Note 3: The input and output negative voltage ratings may be exceeded if the input and output diode current ratings are observed. Note 4: Unused control inputs must be held HIGH or LOW. They may not float. Note 5: Typical values are at TA = +25°C Note 6: Measured by the voltage drop between A and B pins at the indicated current through the switch. On Resistance is determined by the lower of the voltages on the two (A or B) pins. Note 7: Flatness is defined as the difference between the maximum and minimum value On Resistance over the specified range of conditions. Supply Voltage (VCC ) −0.5V to +4.6V DC Switch Voltage (VS) −0.5V to VCC +0.05V DC Input Voltage (VIN) (Note 3) −0.5V to +4.6V DC Input Diode Current (lIK) VIN < 0V −50 mA DC Output (IOUT ) Sink Current 128 mA DC V CC /GND Current (ICC /IGND ) ±100 mA Storage Temperature Range (TSTG ) −65°C to +150 °C ESD Human Body Model 4kV Power Supply Operating (VCC ) 3.0V to 3.6V Input Voltage (VIN) 0V to V CC Output Voltage (VOUT ) 0V to V CC Input Rise and Fall Time (tr, tf) Switch Control Input 0 ns/V to 5 ns/V Switch I/O 0 ns/V to DC Free Air Operating Temperature (T A) −40 °C to +85 °C Symbol Parameter VCC (V) TA = −40 °C to +85 °C Units ConditionsMin Typ (Note 5) Max Analog Signal Range 0 2.0 V VIK Clamp Diode Voltage 3.0 −1.2 V I IN = −18 mA VIH HIGH Level Input Voltage 3.0 - 3.6 2.0 V VIL LOW Level Input Voltage 3.0 - 3.6 0.8 V II Input Leakage Current 3.6 ±1.0 µA0 ≤ VIN ≤ 3.6V IOFF OFF-STATE Leakage Current 3.6 ±1.0 µA0 ≤ A, B ≤ VCC R ON Switch On Resistance 3.0 5.0 7.0 Ω VIN = 1.0V (Note 6) R I = 75 Ω , ION = 13 mA 3.0 4.5 6.0 Ω VIN = 2.0V R I = 75 Ω , ION = 26 mA R FLAT(ON) On Resistance Flatness (Note 7) 3.0 1.0 Ω IOUT = 13 mA, VIN = 0 to VCC ICC Quiescent Supply Current 3.6 1.0 µAV IN = VCC or GND, IOUT = 0 ∆ ICC Increase in ICC per Input 3.6 30.0 uA One Input at 3.0V Other Inputs at VCC or GND

FIGURE 1. Gain vs. Frequency

www.fairchildsemi.com 8 FSAV430 Tape and Reel Specification Tape Format for DQFN TAPE DIMENSIONS inches (millimeters) REEL DIMENSIONS inches (millimeters) Package Tape Number Cavity Cover Tape Designator Section Cavities Status Status Leader (Start End) 125 (typ) Empty Sealed BQ/BQX Carrier 2500/3000 Filled Sealed Trailer (Hub End) 75 (typ) Empty Sealed T a p e S i z e ABCDN W 1 W 2

9 www.fairchildsemi.com FSAV430 Physical Dimensions inches (millimeters) unless otherwise noted 16-Terminal Depopulated Quad Very-Thin Flat Pack No Leads (DQFN), JEDEC MO-241, 2.5 x 3.5mm

www.fairchildsemi.com 10 FSAV430 Physical Dimensions inches (millimeters) unless otherwise noted (Continued) 16-Lead Quarter Size Outline Package (QSOP), JEDEC MO-137, 0.150" Wide

Physical Dimensions inches (millimeters) unless otherwise noted (Continued) 11 www.fairchildsemi.com FSAV430 Low Voltage Ultra Low Power High Bandwidth (1.1GHz) Quad SPDT Video Switch Physical Dimensions inches (millimeters) unless otherwise noted (Continued) 16-Lead Thin Shrink Small Outline Package (TSSOP), JEDEC MO-153, 4.4mm Wide Technology Description The Fairchild Switch family derives from and embodies Fairchild’s proven switch technology used for several years in its 74LVX3L384 (FST3384) bus switch product. Fairchild does not assume any responsibility for use of any circuitry described, no circuit patent licenses are implied and Fairchild reserves the right at any time without notice to change said circuitry and specifications. LIFE SUPPORT POLICY FAIRCHILD ’S PRODUCTS ARE NOT AUTHORIZED FOR USE AS CRITICAL COMPONENTS IN LIFE SUPPORT DEVICES OR SYSTEMS WITHOUT THE EXPRESS WRITTEN APPROVAL OF THE PRESIDENT OF FAIRCHILD SEMICONDUCTOR CORPORATION. As used herein: 1. Life support devices or systems are devices or systems which, (a) are intended for surgical implant into the body, or (b) support or sustain life, and (c) whose failure to perform when properly used in accordance with instructions for use provided in the labeling, can be rea- sonably expected to result in a significant injury to the user. 2. A critical component in any component of a life support device or system whose failure to perform can be rea- sonably expected to cause the failure of the life support device or system, or to affect its safety or effectiveness. www.fairchildsemi.com