FSAL200 FAIRCHILD | Alldatasheet

Document overview

  • Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
  • PDF pages: 6

Technical content

Features

I Typical 6Ω switch connection between two ports I Minimal propagation delay through the switch I Low ICC I Zero bounce in flow-through mode I Control inputs compatible with TTL level I Rail-to-rail signal handling I Low insertion loss I Route communications signals including: 10/100 Ethernet USB1.1 100VG-AnyLAN Token Ring 4/16 Mbps ATM25 SONET OCI 51.8 Mbps T1/E1 Ordering Code: Device also available in Tape and Reel. Specify by appending suffix letter “X” to the ordering code. Analog Symbol Truth Table Connection Diagram Pin Descriptions Order Number Package Number Package Description FSAL200QSC MQA16 16-Lead Quarter Size Outline Package (QSOP), JEDEC MO-137, 0.150" Wide SO E Function X H Disconnect LL A = B1 HL A = B2 Pin Name Description OE Switch Enable S Select Input A, B1, B2 Data Port

www.fairchildsemi.com 2 FSAL200 Absolute Maximum Ratings(Note 1) Recommended Operating Conditions (Note 3) Note 1: Absolute maximum ratings are DC values beyond which the device may be damaged or have its useful life impaired. The datasheet specifica- tions should be met, without exception, to ensure that the system design is reliable over its power supply, temperature, and output/input loading vari- ables. Fairchild does not recommend operation outside datasheet specifi- cations. Note 2: The input and output negative voltage ratings may be exceeded if the input and output diode current ratings are observed. Note 3: Control input must be held HIGH or LOW, it must not float. Note 4: Measured by the voltage drop between A and B pins at the indicated current through the switch. On Resistance is determined by the lower of the voltages on the two (A or B Ports). Note 5: ∆R ON = RON max − RON min measured at identical VCC , temperature and voltage levels. Note 6: Flatness is defined as the difference between the maximum and minimum value of On Resistance over the specified range of conditions. Supply Voltage (VCC ) −0.5V to +7.0V DC Switch Voltage (VS) (Note 2) −0.5V to VCC +0.5V DC Input Voltage (VIN) (Note 2) −0.5V to +7.0V DC Input Diode Current (IIK) @ (IIK) VIN < 0V −50 mA DC Output Current (IOUT ) 120 mA DC V CC or Ground Current (ICC /IGND ) ±100 mA Storage Temperature Range (TSTG ) −65°C to +150°C Power Dissipation (PD ) @ +85°C 0.5 W Ambient Temperature with Power Applied −40°C to +85°C Supply Voltage Operating (VCC ) 3.0V to 5.5V Control Input Voltage (VIN) 0V to V CC Switch Input Voltage (VIN) 0V to V CC Output Voltage (VOUT ) 0V to V CC Operating Temperature (TA) −40°C to +85°C Input Rise and Fall Time (tr, tf) Control Input VCC = 2.3V - 3.6V 0 ns/V to 10 ns/V Control Input VCC = 4.5V - 5.5V 0 ns/V to 5 ns/V Thermal Resistance (θJA)3 5 0 °C/W Symbol Parameter VCC TA = −40°C to +85°C Units Conditions (V) Min Typ Max VIH HIGH Level Input Voltage 4.5 - 5.5 2.0 V 3.0 - 3.6 2.0 VIL LOW Level Input Voltage 4.5 - 5.5 −0.5 0.8 V 3.0 - 3.6 −0.5 0.8 IOZ OFF State Leakage Current 0 − 5.5 100 nA 0 ≤ VIN ≤ 5.5V R ON Switch On Resistance 4.5 - 5.5 6 12 Ω ION = 10 - 30 mA (Note 4) 3.0 - 3.6 15 22 I ON = 10 - 30 mA IIN Control Input Leakage Current 5.5 ±1 µAV IN = VCC or GND 3.6 ±1V IN = VCC or GND ICC Quiescent Supply Current 5.5 1 µA VIN = VCC or GND All Channels ON or OFF IOUT = 0 Analog Signal Range V CC 0V CC V ∆R ON On Resistance Match Between 4.5 - 5.5 0.4 2 Ω IA = −30 mA, VBn = 3.15 Channels (Note 4)(Note 5) 3.0 - 3.6 1 3 I A = −10 mA, VBn 2.1 IO Output Current 4.5 - 5.5 100 mA B n, Bn, S = 0V to 5V 3.0 - 3.6 80 R flat On Resistance Flatness 4.5 - 5.5 3 Ω A, B1, B2 = 0V to 5V (Note 4)(Note 6) 3.0 - 3.6 7 A, B 1, B2 = 0V to 5V

www.fairchildsemi.com 6 FSAL200 Wide Bandwidth Quad 2:1 Analog Multiplexer/Demultiplexer Switch Physical Dimensions inches (millimeters) unless otherwise noted 16-Lead Quarter Size Outline Package (QSOP), JEDEC MO-137, 0.150" Wide Fairchild does not assume any responsibility for use of any circuitry described, no circuit patent licenses are implied and Fairchild reserves the right at any time without notice to change said circuitry and specifications. LIFE SUPPORT POLICY FAIRCHILD ’S PRODUCTS ARE NOT AUTHORIZED FOR USE AS CRITICAL COMPONENTS IN LIFE SUPPORT DEVICES OR SYSTEMS WITHOUT THE EXPRESS WRITTEN APPROVAL OF THE PRESIDENT OF FAIRCHILD SEMICONDUCTOR CORPORATION. As used herein: 1. Life support devices or systems are devices or systems which, (a) are intended for surgical implant into the body, or (b) support or sustain life, and (c) whose failure to perform when properly used in accordance with instructions for use provided in the labeling, can be rea- sonably expected to result in a significant injury to the user. 2. A critical component in any component of a life support device or system whose failure to perform can be rea- sonably expected to cause the failure of the life support device or system, or to affect its safety or effectiveness. www.fairchildsemi.com