FSAL200 ONSEMI | Alldatasheet
Document overview
- Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
- PDF pages: 13
Technical content
To learn more about ON Semiconductor, please visit our website at www.onsemi.com Please note: As part of the Fairchild Semiconductor integration, some of the Fairchild orderable part numbers will need to change in order to meet ON Semiconductor’s system requirements. Since the ON Semiconductor product management systems do not have the ability to manage part nomenclature that utilizes an underscore (_), the underscore (_) in the Fairchild part numbers will be changed to a dash (-). This document may contain device numbers with an underscore (_). Please check the ON Semiconductor website to verify the updated device numbers. The most current and up-to-date ordering information can be found at www.onsemi.com. Please email any questions regarding the system integration to Fairchild_questions@onsemi.com. Is Now Part of ON Semiconductor and the ON Semiconductor logo are trademarks of Semico nductor Components Industries, LLC dba ON Semiconductor or its subsid iaries in the United States and/or other countries. ON Semiconductor ow ns the rights to a number to make changes without further notice to any products herein. ON Semicon ductor makes no warranty, representation or guarantee regarding the s uitability of its products for any particular purpose, nor does ON Semico nductor assume any liability arising out of the application or use of any product or circuit, and specifica lly disclaims any and all liability, including without limitation spe cial, consequential or incidental damages. Buyer is responsible for i ts products and applications using ON Semiconductor products, including compliance with all laws, regul ations and safety requirements or standards, regardless of any suppor t or applications information provided by ON Semiconductor. “Typica l” parameters which may be provided in ON Semiconductor data sheets and/or specifications can and do vary in diffe rent applications and actual performance may vary over time. All operat ing parameters, including “Typicals” must be validated for each custo mer application by customer’s technical experts. ON Semiconductor does not convey any license und er its patent rights nor the rights of others. ON Semiconductor products a re not designed, intended, or authorized for use as a critical compone nt in life support systems or any FDA Class 3 medical devices or medical devices with a same or similar classifica tion in a foreign jurisdiction or any devices intended for implantation i n the human body. Should Buyer purchase or use ON Semiconductor products fo r any such unintended or unauthorized application, Buyer shall indemnify and hold ON Semico nductor and its officers, employees, subsidiaries, affiliates, and di stributors harmless against all claims, costs, damages, and expense s, and reasonable attorney fees arising out of, directly or indirectly, any claim of personal injury or death associa ted with such unintended or unauthorized use, even if such claim alleges th at ON Semiconductor was negligent regarding the design or manufacture o f the part. ON Semiconductor is an Equal Opportunity/Affirmative Action Employer. This literatu re is subject to all applicable copyright laws and is not for resale in any manne r.
© 2002 Fairchild Semiconductor Corporation www.fairchildsemi.com FSAL200 Rev. 1.7.1 FSAL200 — Wide Bandwidth Quad 2:! Analog Multiplexer / De-multiplexer Switch FSAL200 — Wide Bandwidth Quad 2:1 Analog Multiplexer / De-multiplexer Switch
Features
Typical 6Ω Switch Connection Between Two Ports Minimal Propagation Delay Through the Switch Low ICC Zero Bounce in Flow-Through Mode Control Inputs Compatible with TTL Level Rail-to-Rail Signal Handling Route Communications Signals Include: - 10/100 Ethernet - 100VG—AnyLAN - ATM25 - SONET OCI 51.8Mbps - USB1.1 - T1/E1 - Token Ring 4/16Mbps
Description
The Fairchild Switch FSAL200 is a rail-to-rail quad 2:1 high-speed CMOS TTL-compatible analog multiplexer / de-multiplexer switch. The low on resistance of the switch allows inputs to be connected to outputs without adding propagation delay or generating additional ground bounce noise. When OE is low, the select pin connects the A Port to the selected B Port output. When OE is high, the switch is open and a high-impedance state exists between the two ports.
Ordering Information
Part Number Package Description Packing Method FSAL200MTC 16-Lead Thin Shrink Small Outline Package(TSSOP), JEDEC MO-153, 4.4mm Wide Rails FSAL200MTCX 16-Lead Thin Shrink Small Outline Package(TSSOP), JEDEC MO-153, 4.4mm Wide Tape and Reel FSAL200QSC 16-Lead Quarter Size Outline Package (QSOP), JEDEC MO-137, 0.150" Wide Rails FSAL200QSCX 16-Lead Quarter Size Outline Package (QSOP), JEDEC MO-137, 0.150" Wide Tape and Reel All packages are Pb-free per JEDEC standard J-SDD-020B.
© 2002 Fairchild Semiconductor Corporation www.fairchildsemi.com FSAL200 Rev. 1.7.1 3 FSAL200 — Wide Bandwidth Quad 2:! Analog Multiplexer / De-multiplexer Switch Absolute Maximum Ratings Stresses exceeding the absolute maximum ratings may damage the device. The device may not function or be operable above the recommended operating conditions and stressing the parts to these levels is not recommended. In addition, extended exposure to stresses above the recommended operating conditions may affect device reliability. The absolute maximum ratings are stress ratings only. Symbol Parameter Min. Max. Unit VCC Supply Voltage -0.5 7.0 V VSW DC Switch Voltage (1) -0.5 0.5 V VIN DC Input Voltage (1) -0.5 7.0 V IIK DC Input Diode Current at (IIK) VIN < 0V -50 mA IOUT DC Output Current 120 mA ICC /IGND DC VCC or Ground Current ±100 mA PD Power Dissipation at 85°C 0.5 W TSTG Storage Temperature Range -65 +150 °C TA Ambient Temperature with Power Applied -40 +85 °C Note: 1. Input and output negative ratings may be exceeded if input and output diode current ratings are observed. Recommended Operating Conditions The Recommended Operating Conditions table defines the conditions for actual device operation. Recommended operating conditions are specified to ensure optimal performance to the datasheet specifications. Fairchild does not recommend exceeding them or designing to Absolute Maximum Ratings. Symbol Parameter Min. Max. Unit VCC Supply Voltage 3.0 5.5 V VIN Control Input Voltage (2) 0 VCC V VSW Switch Input Voltage V CC V VOUT Output Voltage V CC V TA Operating Temperature -40 +85 °C Control Input VCC =2.3V -3.6V 0 10 tr,tf Input Rise and Fall Time Control Input VCC =4.5V -5.5V 0 5 ns/V θJA Thermal Resistance in Still Sir °C/W Note: 2. Control input must be held HIGH or LOW and it must not float.
© 2002 Fairchild Semiconductor Corporation www.fairchildsemi.com FSAL200 Rev. 1.7.1 4 FSAL200 — Wide Bandwidth Quad 2:! Analog Multiplexer / De-multiplexer Switch Typical values are at 25°C unless otherwise specified. TA=-40°C to +85°C Symbol Parameter Conditions V CC (V) Min. Typ. Max. Units 4.5 to 5.5 2.0 VIH Input Voltage High 3.0 to 3.6 2.0 V 4.5 to 5.5 -0.5 0.8 VIL Input Voltage Low V IOZ Off State Leakage Current 0 ≤ VIN ≤ 5.5V 0 to 5.5 100 µA ION =10 -30mA 4.5 to 5.5 6 12 R ON Switch On Resistance (3) ION =10 -30mA 3.0 to 3.6 15 22 Ω VIN=V CC or GND 5.5 ±1 IIN Control Input Leakage VIN=V CC or GND 3.6 µA ICC Quiescent Supply Current, All Channels Off VIN=V CC or GND, IOUT =0 5.5 1 µA Analog Signal Range V CC 0 V CC V ΔR ON On Resistance Matching Between Channels(3)(4) IA=-10 mA, VBN =2.1 3.0 to 3.6 1.0 3.0 Ω 4.5 to 5.5 100 IO Output Current B n, Bn, S-0V to 5V 3.0 to 3.6 80 m Α A1, B1, B2=0V to 5V 4.5 to 5.5 3 R FLAT(ON) On Resistance Flatness(3)(5) A1, B1, B2=0V to 5V 3.0 to 3.6 Ω Notes: 3. Measured by the voltage drop between the A and B pins at the indicated current through the switch. On resistance is determined by the lower of the voltages on the two (A or B ports). 4. ΔR ON = RON maximum – RON minimum measured at identical VCC , temperature, and voltage levels. 5. Flatness is defined as the difference between the maximum and minimum value of on resistance over the specified range of conditions.
Figure 11. 16-lead, Quarter Size Outline Package (QSOP), JEDEC MO-137. 0.150” wide
Figure 12. 16-lead, Thin Shrink Small Outline Package (TSSOP), JEDEC MO-153, 4.4mm wide
© 2002 Fairchild Semiconductor Corporation www.fairchildsemi.com FSAL200 Rev. 1.7.1 10 FSAL200 — Wide Bandwidth Quad 2:1 Analog Multiplexer / De-multiplexer Switch TRADEMARKS The following are registered and unregistered trademarks and service marks Fairchild Semiconductor owns or is authorized to use and is not intended to be an exhaustive list of all such trademarks. ACEx ® Build it Now™ CorePLUS ™ CROSSVOLT ™ CTL™ Current Transfer Logic™ EcoSPARK ® Fairchild® Fairchild Semiconductor® FACT Quiet Series™ FACT ® FAST ® FastvCore™ FPS ™ FRFET ® Global Power Resource SM Green FPS™ Green FPS™ e-Series™ GTO ™ i-Lo™ IntelliMAX™ ISOPLANAR ™ MegaBuck™ MICROCOUPLER ™ MicroFET™ MicroPak™ MillerDrive™ Motion-SPM™ OPTOLOGIC ® OPTOPLANAR ® PDP-SPM™ Power220® Power247® POWEREDGE ® Power-SPM ™ PowerTrench® Programmable Active Droop™ QFET ® QS ™ QT Optoelectronics™ Quiet Series™ RapidConfigure™ SMART START ™ SPM ® STEALTH™ SuperFET™ SuperSOT™-3 SuperSOT ™-6 SuperSOT ™-8 SyncFET™ The Power Franchise® TinyBoost™ TinyBuck™ TinyLogic® TINYOPTO ™ TinyPower™ TinyPWM ™ TinyWire™ μSerDes™ UHC ® UniFET™ VCX ™ DISCLAIMER FAIRCHILD SEMICONDUCTOR R ESERVES THE RIGHT TO MAKE CHANGES WITHOUT FURTHER NOTICE TO ANY PRO DUCTS HEREIN TO IMPROVE RELIABILITY, FUNCTION, OR DESIGN. FAIRCHILD DOES NOT ASSUME ANY LIABILITY ARISING OUT OF THE APPLICATION OR USE OF ANY PRODUCT OR CIRCUIT DESCRIBED HEREIN; NEITHER DOES IT CONVEY ANY LICENSE UNDER ITS PATENT RIGHTS, NOR THE RIGHTS OF OTHERS. THESE SPECIFICATIONS DO NOT EXPAND THE TERMS OF FAIRCHILD’S WORLDWIDE TERMS AND CONDITIONS, SPECIFICALLY THE WARRANTY THEREIN, WHICH COVERS THESE PRO DUCTS. LIFE SUPPORT POLICY FAIRCHILD’S PRODUCTS ARE NOT AUTHORIZED FOR USE AS CRITICAL COMPONENTS IN LIFE SUPPORT DEV ICES OR SYSTEMS WITHOUT THE EXPRESS WRITTEN APPROVAL OF FAI RCHILD SEMICONDUCTOR CORPORATION. As used herein: 1. Life support devices or systems are devices or systems which, (a) are intended for surgical implant into the body or (b) support or sustain life, and (c) whose failure to perform when properly used in accordance with instructions for use provided in the labeling, can be reasonably expected to result in a significant injury of the user. 2. A critical component in any component of a life support, device, or system whose failure to perform can be reasonably expected to cause the failure of the life support device or system, or to affect its safety or effectiveness. PRODUCT STATUS DEFINITIONS Definition of Terms Datasheet Identification Product Status Definition Advance Information Formative or In Design This datasheet contains the design specifications for product development. Specifications may change in any manner without notice. Preliminary First Production This datasheet contai ns preliminary data; supplementary data will be published at a later date. Fairchild Semiconductor reserves the right to make changes at any time without notice to improve design. No Identification Needed Full Production This datasheet contains final specifications. Fairchild Semiconductor reserves the right to make changes at any time without notice to improve design. Obsolete Not In Production This datasheet contains specifications on a product that has been discontinued by Fairchild Semiconductor. The datasheet is printed for reference information only. Rev. I31
© 2002 Fairchild Semiconductor Corporation www.fairchildsemi.com FSAL200 Rev. 1.7.1 11 FSAL200 — Wide Bandwidth Quad 2:1 Analog Multiplexer / De-multiplexer Switch
www.onsemi.com ON Semiconductor and are trademarks of Semiconductor Components Industries, LLC dba ON Semiconductor or its subsidiaries i n the United States and/or other countries. ON Semiconductor owns the rights to a number of patents, trademarks, copyrights, trade secrets, and other intellectual property . A listing of ON Semiconductor’s product/patent ON Semiconductor makes no warranty, representation or guarantee regarding the suitability of its products for any particular purpose, nor does ON Semiconductor assume any liability arising out of the application or use of any product or circuit, and specifically disclaims any and all liability, including without limitation special, consequential or incidental damages. Buyer is responsible for its products and applications using ON Semiconductor products, including compliance with all laws, reg ulations and safety requirements or standards, regardless of any support or applications information provided by ON Semiconductor. “Typical” parameters which may be provided in ON Semiconductor data sheets and/or specifications can and do vary in different applications and actual performance may vary over time. All operating parameters, including “Typicals” must be validated for each customer application by customer’s technical experts. ON Semiconductor does not convey any license under its patent rights nor the right s of others. ON Semiconductor products are not designed, intended, or authorized for use as a critical component in life support systems or any FDA Class 3 medical devices or medical devices with a same or similar classification in a foreign jurisdiction or any devices intended for implantation in the human body. Should Buyer purchase or use ON Semiconductor products for any such unintended or unauthorized application, Buyer shall indemnify and hold ON Semiconductor and its officers, employees, subsidiaries, affiliates, and distributors harmless against all claims, costs, damages, and expenses, and reasonable attorney fees arising out of, directly or indirectly, any claim of personal injury or death associated with such unintended or unauthorized use, even if such claim alleges that ON Semiconductor was negligent regarding the design or manufacture of the part. ON Semiconductor is an Equal Opportunity/Affirmative Action Employer. This literature is subject to all applicable copyright laws and is not for resale in any manner. PUBLICATION ORDERING INFORMATION N. American Technical Support: 800−282−9855 Toll Free USA/Canada Europe, Middle East and Africa Technical Support: Phone: 421 33 790 2910 Japan Customer Focus Center Phone: 81−3−5817−1050 www.onsemi.com LITERATURE FULFILLMENT: Literature Distribution Center for ON Semiconductor 19521 E. 32nd Pkwy, Aurora, Colorado 80011 USA Phone: 303−675−2175 or 800−344−3860 Toll Free USA/Canada Fax: 303−675−2176 or 800−344−3867 Toll Free USA/Canada Email: orderlit@onsemi.com ON Semiconductor Website: www.onsemi.com Order Literature: http://www.onsemi.com/orderlit For additional information, please contact your local Sales Representative Semiconductor Components Industries, LLC