FSA806

FSA806 ONSEMI | Alldatasheet

Document overview

• Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
• PDF pages: 14

Technical content

To learn more about ON Semiconductor, please visit our website at www.onsemi.com Please note: As part of the Fairchild Semiconductor integration, some of the Fairchild orderable part numbers will need to change in order to meet ON Semiconductor’s system requirements. Since the ON Semiconductor product management systems do not have the ability to manage part nomenclature that utilizes an underscore (_), the underscore (_) in the Fairchild part numbers will be changed to a dash (-). This document may contain device numbers with an underscore (_). Please check the ON Semiconductor website to verify the updated device numbers. The most current and up-to-date ordering information can be found at www.onsemi.com. Please email any questions regarding the system integration to Fairchild_questions@onsemi.com. Is Now Part of ON Semiconductor and the ON Semiconductor logo are trademarks of Semico nductor Components Industries, LLC dba ON Semiconductor or its subsid iaries in the United States and/or other countries. ON Semiconductor ow ns the rights to a number to make changes without further notice to any products herein. ON Semicon ductor makes no warranty, representation or guarantee regarding the s uitability of its products for any particular purpose, nor does ON Semico nductor assume any liability arising out of the application or use of any product or circuit, and specifica lly disclaims any and all liability, including without limitation spe cial, consequential or incidental damages. Buyer is responsible for i ts products and applications using ON Semiconductor products, including compliance with all laws, regul ations and safety requirements or standards, regardless of any suppor t or applications information provided by ON Semiconductor. “Typica l” parameters which may be provided in ON Semiconductor data sheets and/or specifications can and do vary in diffe rent applications and actual performance may vary over time. All operat ing parameters, including “Typicals” must be validated for each custo mer application by customer’s technical experts. ON Semiconductor does not convey any license und er its patent rights nor the rights of others. ON Semiconductor products a re not designed, intended, or authorized for use as a critical compone nt in life support systems or any FDA Class 3 medical devices or medical devices with a same or similar classifica tion in a foreign jurisdiction or any devices intended for implantation i n the human body. Should Buyer purchase or use ON Semiconductor products fo r any such unintended or unauthorized application, Buyer shall indemnify and hold ON Semico nductor and its officers, employees, subsidiaries, affiliates, and di stributors harmless against all claims, costs, damages, and expense s, and reasonable attorney fees arising out of, directly or indirectly, any claim of personal injury or death associa ted with such unintended or unauthorized use, even if such claim alleges th at ON Semiconductor was negligent regarding the design or manufacture o f the part. ON Semiconductor is an Equal Opportunity/Affirmative Action Employer. This literatu re is subject to all applicable copyright laws and is not for resale in any manne r.

© 2010 Fairchild Semiconductor Corporation www.fairchildsemi.com FSA806 • Rev. 1.0.1 FSA806 — USB2.0 High-Speed (480Mbps), UART, and Audio Switch with Negative Signal Capability FSA806 — USB2.0 High-Speed (480Mbps), UART, and Audio Switch with Negative Signal Capability

Features

 3:1 Switch Handles: - Audio Headsets - UART - Up to Two High- and Low-Speed USB Data  Negative-Swing-Capable Audio Channel  Built-in Termination Resistors for Audio Pop Reduction  Simple Switch Control Using Two Select Pins

Applications

 Cell Phones, MP3 Players, PDAs

Description

The FSA806 is a 3:1 USB accessory switch that enables USB data, stereo and mono audio, and UART data to share a common connector port. Two ports are designed for high-speed USB 2.0 signaling, while also capable of full speed USB and UART communication. The architecture is designed to allow audio signals to swing below ground so a common USB and headphone jack can be used for personal media players and portable peripheral devices. The FSA806 meets both USB Rev. 2.0 and micro-USB specifications.

Ordering Information

Part Number Operating Temperature Range Top Mark Package FSA806UMX -40 to +85°C KN 12-Lead Quad, 1.8 x 1.8mm Ultrathin Molded Leadless Package (UMLP) Figure 1. Functional Block Diagram

Figure 2. Typical Application phone purchases by allowing re-use of the accessories. of three ports at the baseband’s discretion.

Table 1. Selection Truth Table

1. The SELECT pins are CMOS inputs and should not be left in a floating condition. Some applications require a

resistors to GND defaults the device to all paths open (low-power mode).

1. When the audio switch is in the OPEN position, the R and L are terminat ed to GND with internal termination

resistors to discharge any stray capacitance that could cause audio pop.

Figure 3. 12-Pin, UMLP Pin Assignments (Top-Through View) R_HOST 7 Right audio channel from phone audio codec. L_HOST 8 Left audio channel from phone audio codec. VCC 2 Input voltage supply pin to be connected to the phone battery output. can share DP_HOST1, DP_HOST2 or R_HOST signals. can share DM_HOST1, DM_HOST2 or L_HOST signals. SEL[1:0] 12, 1 Switch selection pins; refer to Table 1 for truth table.

© 2010 Fairchild Semiconductor Corporation www.fairchildsemi.com FSA806 • Rev. 1.0.1 5 FSA806 — USB2.0 High-Speed (480Mbps), UART, and Audio Switch with Negative Signal Capability Absolute Maximum Ratings Stresses exceeding the absolute maximum ratings may damage the device. The devic e may not function or be operable above the recommended operating c onditions and stressing the parts to these levels is not recommended. In addition, extended exposure to stresses above the recommended operating conditions may affect device reliability. The absolute maximum ratings are stress ratings only. Symbol Parameter Min. Max. Unit VCC Supply Voltage from Battery / Baseband -0.5 6.0 V VSW Switch I/O Voltage USB -0.5 V BUS+0.5 V Stereo/Mono Audio Path Active Vcc-8.5 V CC +0.5 All Other Channels -0.5 V CC +0.5 IIK Input Clamp Diode Current -50 mA ISW Switch I/O Current (Continuous) USB 50 mA Audio 60 All Other Channels 50 ISWPEAK Peak Switch Current (Pulsed at 1ms Duration, <10% Duty Cycle) USB 150 mA Audio 150 mA All Other Channels 150 mA TSTG Storage Temperature Range -65 +150 °C TJ Maximum Junction Temperature +150 °C TL Lead Temperature (Solder ing, 10 Seconds) +260 °C ESD IEC 61000-4-2 System USB Connector Pins (D+, D-, VBUS) Air Gap 15 kV Contact 8 Human Body Model, JEDEC JESD22-A114 All Pins 3 Charged Device Model, JEDEC JESD22-C101 All Pins 2 Recommended Operating Conditions The Recommended Operating Conditions table defines the conditions for actual device oper ation. Recommended operating conditions are specified to ens ure optimal performance to the datasheet specificat ions. Fairchild does not recommend exceeding them or designing to Absolute Maximum Ratings. Symbol Parameter Min. Max. Unit VCC Battery Supply Voltage 2.7 4.4 V VSW Switch I/O Voltage USB/UART Path Active 0 4.4 V Audio Path Active V CC-7 2.0 V TA Operating Temperature -40 +85 ºC

© 2010 Fairchild Semiconductor Corporation www.fairchildsemi.com FSA806 • Rev. 1.0.1 7 FSA806 — USB2.0 High-Speed (480Mbps), UART, and Audio Switch with Negative Signal Capability Switch Path AC Electrical Characteristics(4) All typical value are for VCC =3.8V at 25ºC unless otherwise specified. Symbol Parameter V CC (V) Conditions TA = -40 to +85°C Unit Figure Min. Typ. Max. Xtalk Active Channel Crosstalk DP_CON to DM_CON Audio Mode 3.8 f=20kHz, RT=32Ω, CL=0pF -95 dB Figure 10 USB Mode 3.8 f=1MHz, RT=50Ω, CL=0pF -75 f=240MHz, RT=50Ω, CL=0pF -36 OIRR Off Isolation Rejection Ratio Audio Rejection L_HOST to DM_CON, R_HOST to DP_CON 3.8 f=20kHz, RT=32Ω, CL=0pF -100 dB Figure 9 USB Rejection DM_HOST to DM_CON, DP_HOST to DP_CON 3.8 f=1 MHz, RT=50Ω, CL=0pF -85 f=240MHz, RT=50Ω, CL=0pF -35 THD+N Total Harmonic Distortion + Noise (Audio Path) 3.8 20Hz to 20kHz, RL=16Ω, Input Signal Range 1.6VPP 0.10 % Figure 14 20Hz to 20kHz, RL=32Ω, Input Signal Range 1.6VPP 0.07 % Figure 14 Note: 4. Guaranteed by characteriza tion; not production tested. Capacitance Symbol Parameter V CC (V) Conditions TA = -40 to +85°C Unit Figure Min. Typ. Max. CIN Select Pins Capacitance(5) 0 V BIAS=0.2V 2.5 pF Figure 12 COFF(D+, D-) D+, D- On Capacitance (HS USB Mode)(5) 3.8 V BIAS=0.2V, f=1MHz 4.0 pF Figure 12 CON(D+, D-) D+, D- On Capacitance (HS USB Mode)(5) 3.8 V BIAS=0.2V, f=1MHz 6.8 pF Figure 13 Note: 5. Guaranteed by characteriza tion; not production tested.

B. DIMENSIONS ARE IN MILLIMETERS. E. DRAWING FILENAME: MKT-UMLP12Arev4.

0.10 C A B

Figure 15. 12-Lead, Ultrathin Molded Leadless Package (UMLP) warranty therein, which covers Fairchild products. http://www.fairchildsemi.com/packaging/.

© 2010 Fairchild Semiconductor Corporation www.fairchildsemi.com FSA806 • Rev. 1.0.1 12 FSA806 — USB2.0 High-Speed (480Mbps), UART, and Audio Switch with Negative Signal Capability

www.onsemi.com ON Semiconductor and are trademarks of Semiconductor Components Industries, LLC dba ON Semiconductor or its subsidiaries i n the United States and/or other countries. ON Semiconductor owns the rights to a number of patents, trademarks, copyrights, trade secrets, and other intellectual property . A listing of ON Semiconductor’s product/patent ON Semiconductor makes no warranty, representation or guarantee regarding the suitability of its products for any particular purpose, nor does ON Semiconductor assume any liability arising out of the application or use of any product or circuit, and specifically disclaims any and all liability, including without limitation special, consequential or incidental damages. Buyer is responsible for its products and applications using ON Semiconductor products, including compliance with all laws, reg ulations and safety requirements or standards, regardless of any support or applications information provided by ON Semiconductor. “Typical” parameters which may be provided in ON Semiconductor data sheets and/or specifications can and do vary in different applications and actual performance may vary over time. All operating parameters, including “Typicals” must be validated for each customer application by customer’s technical experts. ON Semiconductor does not convey any license under its patent rights nor the right s of others. ON Semiconductor products are not designed, intended, or authorized for use as a critical component in life support systems or any FDA Class 3 medical devices or medical devices with a same or similar classification in a foreign jurisdiction or any devices intended for implantation in the human body. Should Buyer purchase or use ON Semiconductor products for any such unintended or unauthorized application, Buyer shall indemnify and hold ON Semiconductor and its officers, employees, subsidiaries, affiliates, and distributors harmless against all claims, costs, damages, and expenses, and reasonable attorney fees arising out of, directly or indirectly, any claim of personal injury or death associated with such unintended or unauthorized use, even if such claim alleges that ON Semiconductor was negligent regarding the design or manufacture of the part. ON Semiconductor is an Equal Opportunity/Affirmative Action Employer. This literature is subject to all applicable copyright laws and is not for resale in any manner. PUBLICATION ORDERING INFORMATION N. American Technical Support: 800−282−9855 Toll Free USA/Canada Europe, Middle East and Africa Technical Support: Phone: 421 33 790 2910 Japan Customer Focus Center Phone: 81−3−5817−1050 www.onsemi.com LITERATURE FULFILLMENT: Literature Distribution Center for ON Semiconductor 19521 E. 32nd Pkwy, Aurora, Colorado 80011 USA Phone: 303−675−2175 or 800−344−3860 Toll Free USA/Canada Fax: 303−675−2176 or 800−344−3867 Toll Free USA/Canada Email: orderlit@onsemi.com ON Semiconductor Website: www.onsemi.com Order Literature: http://www.onsemi.com/orderlit For additional information, please contact your local Sales Representative  Semiconductor Components Industries, LLC