FSA5157 FAIRCHILD | Alldatasheet

Document overview

  • Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
  • PDF pages: 11

Technical content

Features

/c79 Typical 0.4/c58 On Resistance (RON) for /c14 2.7V supply /c79 FSA5157 features less than 12/c80 A ICCT current when S input is lower than VCC /c79 0.25/c58 maximum RON flatness for /c14 2.7V supply /c79 1.0mm x 1.45mm 6-Lead Pb-Free MicroPak /c165 package /c79 Broad VCC operating range: 1.65V to 4.3V /c79 Low THD (0.02% typical for 32/c58 load) /c79 High current handling capability (350mA continuous current under 3.3V supply) /c79 Control logic is 1.8V CMOS logic compatible

Applications

/c79 Cellular phone /c79 PDA /c79 Portable Media Player Ordering Code: Pb-Free package per JEDEC J-STD-020B. Applications Diagram MicroPak/c165 is a trademark of Fairchild Semiconductor Corporation. Product Package Description Supplied AsOrder Package Code Number Number Top Mark FSA5157P6X MAA06A A57 6-Lead SC70, EIAJ SC88, 1.25mm Wide 3K Units on Tape and Reel FSA5157P6X_NL MAA06A A57 Pb-Free 6-Lead SC70, EIAJ SC88, 1.25mm Wide 3K Units on Tape and Reel FSA5157L6X MAC06A FT Pb-Free 6-Lead MicroPak , 1.0mm Wide 5K Units on Tape and Reel

www.fairchildsemi.com 2 FSA5157 Analog Symbols Pin Assignment for SC70 (Top View) Pin Assignment for MicroPak (Top Through View) Truth Table H = HIGH Logic Level L = LOW Logic Level Pin Descriptions Control Input(s) Function LB 0 Connected to A HB 1 Connected to A Pin Names Function A, B0, B1 Data Ports S Control Input

3 www.fairchildsemi.com FSA5157 Absolute Maximum Ratings(Note 1) Recommended Operating Conditions Note 1: The “Absolute Maximum Ratings” are those values beyond which the safety of the device cannot be guaranteed. The device should not be operated at these lim- its. The parametric values defined in the Electrical Characteristics tables are not guaranteed at the absolute maximum ratings. The “Recommended Operating Condi- tions” table will define the conditions for actual device operation. Note 2: The input and output negative voltage ratings may be exceeded if the input and output diode current ratings are observed. Note 3: Unused inputs must be held HIGH or LOW. They may not float. Supply Voltage (VCC) /c16 0.5V to /c14 4.6V Switch Voltage (VS) (Note 2) /c16 0.5V to VCC /c14 3.0V Input Voltage (VIN) (Note 2) /c16 0.5V to /c14 4.6V Input Diode Current /c16 50 mA Switch Current 350 mA Peak Switch Current (Pulsed at 1 ms duration, /c31 10% Duty Cycle) 500 mA Storage Temperature Range (TSTG) /c16 65/c113 C to /c14 150/c113 C Maximum Junction Temperature (TJ) /c14 150/c113 C Lead Temperature (TL) Soldering, 10 seconds /c14 260/c113 C ESD Human Body Model 8000V Supply Voltage (VCC) 1.65V to 4.3V Control Input Voltage (VIN) (Note 3) 0V to V CC Switch Input Voltage (VIN)0 V t o V CC Operating Temperature (TA) /c16 40/c113 C to /c14 85/c113 C Symbol Parameter VCC TA = /c14 25/c113 CT A = /c16 40/c113 C to /c14 85/c113 C Units Conditions (V) Min Typ Max Min Max VIH Input Voltage High 3.6 to 4.3 1.4 V 2.7 to 3.6 1.3 2.3 to 2.7 1.1 1.65 to 1.95 0.9 VIL Input Voltage Low 3.6 to 4.3 0.7 V 2.7 to 3.6 0.5 2.3 to 2.7 0.4 1.65 to 1.95 0.4 IIN Control Input Leakage 1.65 to 4.3 /c16 0.5 0.5 /c80 AV IN = 0V to VCC INC(OFF) of Port B0 and B1 B0 or B1 = 0.3V, VCC /c16 0.3V or Floating of Port A B0 or B1 = 0.3V, VCC /c16 0.3V or Floating RON Switch On Resistance 4.3 0.36 0.6 /c58 IOUT = 100 mA, B0 or 0.7V, 3.6V (Note 4) B0 or B1 = 0V, 0.7V, 3.6V, 4.3V 2.7 0.4 0.7 I OUT = 100 mA, B0 or B1 = 0V, 0.7V, 2.0V, 2.7V 2.3 0.55 0.8 I OUT = 100 mA, 0V or Delete 0.7V, 2.0V, 2.3V /c39 RON On Resistance Matching 4.3 0.04 0.75 /c58 IOUT = 100 mA, B0 or B1 = 0.7V Between Channels 2.7 0.06 0.13 (Note 5) 2.3 0.12 0.2 1.65 1.0 RFLAT(ON) On Resistance Flatness 4.3 0.25 /c58 IOUT = 100 mA, B0 or B1 = 0V to VCC (Note 6) 2.7 0.25 2.3 0.3 1.65 0.3 ICC Quiescent Supply Current 4.3 /c16 100.0 30.0 100.0 /c16 500 500 nA V IN = 0V or VCC, IOUT = 0V ICCT Increase in ICC per 4.3 7.0 12.0 15.0 /c80 A VIN = 1.8 Control Input 3.0 6.0 7.0 V IN = 2.6

www.fairchildsemi.com 4 FSA5157 Note 4: On Resistance is determined by the voltage drop between A and B pins at the indicated current through the switch. Note 5: /c39 RON = RONmax /c16 RONmin measured at identical VCC, temperature, and voltage. Note 6: Flatness is defined as the difference between the maximum and minimum value of On Resistance over the specified range of conditions. Capacitance Symbol Parameter VCC TA = /c14 25/c113 CT A= /c16 40/c113 C to /c14 85/c113 C Units Conditions Figure (V) Min Typ Max Min Max Number tON Turn ON Time 3.6 to 4.3 55.0 60.0 ns Figure 4 2.3 to 2.7 65.0 70.0 R L = 50/c58 , CL = 35 pF 1.65 to 1.95 70.0 90.0 tOFF Turn OFF Time 3.6 to 4.3 30.0 35.0 ns Figure 4 2.3 to 2.7 40.0 45.0 R L = 50/c58 , CL = 35 pF 1.65 to 1.95 40.0 55.0 tB-M Break-Before-Make 3.6 to 4.3 5.0 ns Figure 5 Time 2.7 to 3.6 5.0 B 0 or B1 = 1.5V, 2.3 to 2.7 5.0 R L = 50/c58 , CL = 35 pF 1.65 to 1.95 5.0 Q Charge Injection 3.6 to 4.3 6.0 pC C L = 1.0 nF, VGEN = 0V, RGEN = 0/c58 Figure 7 2.7 to 3.6 6.0 2.3 to 2.7 6.0 1.65 to 1.95 OIRR OFF-Isolation 3.6 to 4.3 /c16 75.0 dB f = 100kHz, R L = 50/c58 , CL = 5 pF (Stray) Figure 6 2.7 to 3.6 /c16 75.0 2.3 to 2.7 /c16 75.0 1.65 to 1.95 /c16 75.0 Xtalk Crosstalk 3.6 to 4.3 /c16 75.0 dB f = 100kHz, R L = 50/c58 , CL = 5 pF (Stray) Figure 6 2.7 to 3.6 /c16 75.0 2.3 to 2.7 /c16 75.0 1.65 to 1.95 /c16 70.0 BW /c16 3db Bandwidth 1.65 to 4.3 80.0 MHz R L = 50/c58 Figure 9 THD Total Harmonic 3.6 to 4.3 % Figure Distortion 2.7 to 3.6 0.02 R L = 32/c58 , VIN = 2V P.P, f= 20Hz to 20kHz Symbol Parameter VCC TA = /c14 25/c113 CT A = 40/c113 C to /c14 85/c113 C Units Conditions (V) Min Typ Max Min Max CIN Control Pin Input Capacitance 0.0 1.5 pF f = 1MHz (see Figure 8) COFF B Port OFF Capacitance 4.5 21.0 pF f = 1MHz (see Figure 8) CON A Port ON Capacitance 4.5 90.0 pF f = 1MHz (see Figure 8)

www.fairchildsemi.com 8 FSA5157 Tape and Reel Specification Tape Format For Micropak 6 REEL DIMENSIONS inches (millimeters) Package Tape Number Cavity Cover Tape Designator Section Cavities Status Status Leader (Start End) 125 (typ) Empty Sealed L6X Carrier 5000 Filled Sealed Trailer (Hub End) 75 (typ) Empty Sealed Tape Size ABCDN W 1 W 2 W 3 8 mm

9 www.fairchildsemi.com FSA5157 Physical Dimensions inches (millimeters) unless otherwise noted 6-Lead SC70, EIAJ SC88, 1.25mm Wide

www.fairchildsemi.com 10 FSA5157 Physical Dimensions inches (millimeters) unless otherwise noted (Continued) Pb-Free 6-Lead MicroPak, 1.0mm Wide

11 www.fairchildsemi.com FSA5157 0.4/G58 Low Voltage SPDT Analog Switch (Preliminary) DISCLAIMER FAIRCHILD SEMICONDUCTOR RESERVES THE RIGHT TO MAKE CHANGES WITHOUT FURTHER NOTICE TO ANY PRODUCTS HEREIN TO IMPROVE RELIABILITY, FUNCTION OR DESIGN. FAIRCHILD DOES NOT ASSUME ANY LIABILITY ARISING OUT OF THE APPLICATION OR USE OF ANY PRODUCT OR CIRCUIT DESCRIBED HEREIN; NEITHER DOES IT CONVEY ANY LICENSE UNDER ITS PATENT RIGHTS, NOR THE RIGHTS OF OTHERS. LIFE SUPPORT POLICY FAIRCHILD’S PRODUCTS ARE NOT AUTHORIZED FOR USE AS CRITICAL COMPONENTS IN LIFE SUPPORT DEVICES OR SYSTEMS WITHOUT THE EXPRESS WRITTEN APPROVAL OF FAIRCHILD SEMICONDUCTOR CORPORATION As used herein: 1. Life support devices or s ystems are devices or systems which, (a) are intended for surgical implant into the body, or (b) support or sustain life, or (c) whose failure to perform when properly used in accordanc e with instructions for use provided in the labeling, can be reasonably expected to result in significant injury to the user. 2. A critical component is any component of a life support device or system whose failure to perform can be reason- ably expected to cause the failure of the life support device or system, or to affect its safety or effectiveness. PRODUCT STATUS DEFINITIONS Definition of terms Datasheet Identification Product Status Definition Advance Information Formative or In Design This datasheet contains the design specifications for product develop- ment. Specifications may change in any manner without notice. Preliminary First Production This datasheet contai ns preliminary data, and supplementary data will be published at a later date. Fairchild Semiconductor reserves the right to make changes at any time without notice in order to improve design. No Identification Needed Full Production This datasheet cont ains final specifications. Fairchild Semiconductor reserves the right to make changes at any time without notice in order to improve design. Obsolete Not In Production This datasheet contains specifications on a product that has been dis- continued by Fairchild Semiconductor. The datasheet is printed for ref- erence information only.