FSA3357 FAIRCHILD | Alldatasheet

Document overview

  • Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
  • PDF pages: 7

Technical content

Features

I Useful in both analog and digital applications I Space saving US8 8-lead surface mount package I Low On Resistance; < 9Ω on typ @ 3.3V VCC I Broad VCC operating range; 1.65V to 5.5V I Rail-to-Rail signal handling I Power down high impedance control input I Overvoltage tolerance of control input to 7.0V I Break before make enable circuitry I 250 MHz - 3dB bandwidth Ordering Code: Analog Symbol Function Table Connection Diagram (Top View) Pin Descriptions Product Package Description Supplied AsOrder Package Code Number Number Top Mark FSA3357K8X MAB08A A357 8-Lead US8, JEDEC MO-187, Variation CA 3.1mm Wide 3k Units on Tape and Reel S1 S2 Function 0 0 No Connection

10 B 0 Connected to A

01 B 1 Connected to A

11 B 2 Connected to A

A1, B0, B1, B2 Data Ports S1, S2 Control Input

www.fairchildsemi.com 2 FSA3357 Absolute Maximum Ratings(Note 1) Recommended Operating Conditions (Note 3) Note 1: Absolute maximum ratings are DC values beyond which the device may be damaged or have its useful life impaired. The datasheet specifica- tions should be met, without exception, to ensure that the system design is reliable over its power supply, temperature, and output/input loading vari- ables. Fairchild does not recommend operation outside datasheet specifi- cations. Note 2: The input and output negative voltage ratings may be exceeded if the input and output diode current ratings are observed. Note 3: Control inputs must be held HIGH or LOW, they must not float. Note 4: Measured by the voltage drop between A and Bn pins at the indicated current through the switch. On Resistance is determined by the lower of the voltages on the two (A or Bn Ports). Note 5: Parameter is characterized but not tested in production. Note 6: ∆R ON = RON max − RON min measured at identical VCC , temperature and voltage levels. Note 7: Flatness is defined as the difference between the maximum and minimum value of On Resistance over the specified range of conditions. Supply Voltage (VCC ) −0.5V to +7.0V DC Switch Voltage (VS) (Note 2) −0.5V to VCC +0.5V DC Input Voltage (VIN) (Note 2) −0.5V to +7.0V DC Input Diode Current (IIK) @ (IIK) VIN < 0V −50 mA DC Output Current (IOUT ) 128 mA DC V CC or Ground Current (ICC /IGND ) ±100 mA Storage Temperature Range (TSTG ) −65°C to +150°C Junction Temperature under Bias (TJ)1 5 0 °C Junction Lead Temperature (TL) (Soldering, 10 seconds) 260 °C Power Dissipation (PD ) @ +85°C1 8 0 m W Supply Voltage Operating (VCC ) 1.65V to 5.5V Control Input Voltage (VIN) 0V to V CC Switch Input Voltage (VIN) 0V to V CC Output Voltage (VOUT ) 0V to V CC Operating Temperature (TA) −40°C to +85°C Input Rise and Fall Time (tr, tf) Control Input VCC = 2.3V - 3.6V 0 ns/V to 10 ns/V Control Input VCC = 4.5V - 5.5V 0 ns/V to 5 ns/V Thermal Resistance (θJA)2 5 0 °C/W Symbol Parameter VCC TA = +25°CT A = −40°C to +85°C Units Conditions (V) Min Typ Max Min Max VIH HIGH Level 1.65 − 1.95 0.75 VCC 0.75 VCC V Input Voltage 2.3 − 5.5 0.7 VCC 0.7 VCC VIL LOW Level 1.65 − 1.95 0.25 V CC 0.25 VCC V Input Voltage 2.3 − 5.5 0.3 V CC 0.3 VCC IIN Input Leakage Current 0 − 5.5 ±0.1 ±1.0 µA0 ≤ VIN ≤ 5.5V IOFF OFF State Leakage Current 1.65 − 5.5 ±0.1 ±1.0 µA0 ≤ A, Bn ≤ VCC R ON Switch On Resistance 4.5 5.0 7.0 7.0 Ω VIN = 0V, IO = 30 mA (Note 4) 6.0 12.0 12.0 V IN = 2.4V, IO = −30 mA 7.0 15.0 15.0 V IN = 4.5V, IO = −30 mA 3.0 6.5 9.0 9.0 V IN = 0V, IO = 24 mA 9.0 20.0 20.0 V IN = 3V, IO = −24 mA 2.3 8.0 12.0 12.0 V IN = 0V, IO = 8 mA 11.0 30.0 30.0 V IN = 2.3V, IO = −8 mA 1.65 10.0 20.0 20.0 V IN = 0V, IO = 4 mA 17.0 50.0 50.0 V IN = 1.65V, IO = −4 mA ICC Quiescent Supply Current 5.5 1.0 10.0 µA VIN = VCC or GND All Channels ON or OFF IOUT = 0 ASR Analog Signal Range V CC 0.0 V CC 0.0 V CC V ∆R ON On Resistance Match 4.5 0.15 Ω IA = −30 mA, VBn = 3.15 Between Channels 3.0 0.22 I A = −24 mA, VBn = 2.1 (Note 4)(Note 5)(Note 6) 2.3 0.31 I A = −8 mA, VBn = 1.6 1.65 0.62 I A = −4 mA, VBn = 1.15 R flat On Resistance Flatness 5.0 6.0 Ω IA = −30 mA, 0 ≤ VBn ≤ VCC (Note 4)(Note 5)(Note 7) 3.3 12.0 I A = −24 mA, 0 ≤ VBn ≤ VCC 2.5 40.0 I A = −8 mA, 0 ≤ VBn ≤ VCC 1.8 140.0 I A = −4 mA, 0 ≤ VBn ≤ VCC

www.fairchildsemi.com 6 FSA3357 Tape and Reel Specification TAPE FORMAT TAPE DIMENSIONS inches (millimeters) REEL DIMENSIONS inches (millimeters) Package Tape Number Cavity Cover Tape Designator Section Cavities Status Status Leader (Start End) 125 (typ) Empty Sealed K8X Carrier 250 Filled Sealed Trailer (Hub End) 75 (typ) Empty Sealed Tape Size ABCDN W 1 W 2 W 3

7 www.fairchildsemi.com FSA3357 Low Voltage SP3T Analog Switch (3:1 Multiplexer/Demultiplexer) Physical Dimensions inches (millimeters) unless otherwise noted 8-Lead US8, JEDEC MO-187, Variation CA 3.1mm Wide Fairchild does not assume any responsibility for use of any circuitry described, no circuit patent licenses are implied and Fairchild reserves the right at any time without notice to change said circuitry and specifications. LIFE SUPPORT POLICY FAIRCHILD’S PRODUCTS ARE NOT AUTHORIZED FOR USE AS CRITICAL COMPONENTS IN LIFE SUPPORT DEVICES OR SYSTEMS WITHOUT THE EXPRESS WRITTEN APPROVAL OF THE PRESIDENT OF FAIRCHILD SEMICONDUCTOR CORPORATION. As used herein: 1. Life support devices or systems are devices or systems which, (a) are intended for surgical implant into the body, or (b) support or sustain life, and (c) whose failure to perform when properly used in accordance with instructions for use provided in the labeling, can be rea- sonably expected to result in a significant injury to the user. 2. A critical component in any component of a life support device or system whose failure to perform can be rea- sonably expected to cause the failure of the life support device or system, or to affect its safety or effectiveness. www.fairchildsemi.com