FSA3030

FSA3030 ONSEMI | Alldatasheet

Document overview

• Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
• PDF pages: 14

Technical content

To learn more about ON Semiconductor, please visit our website at www.onsemi.com Please note: As part of the Fairchild Semiconductor integration, some of the Fairchild orderable part numbers will need to change in order to meet ON Semiconductor’s system requirements. Since the ON Semiconductor product management systems do not have the ability to manage part nomenclature that utilizes an underscore (_), the underscore (_) in the Fairchild part numbers will be changed to a dash (-). This document may contain device numbers with an underscore (_). Please check the ON Semiconductor website to verify the updated device numbers. The most current and up-to-date ordering information can be found at www.onsemi.com. Please email any questions regarding the system integration to Fairchild_questions@onsemi.com. Is Now Part of ON Semiconductor and the ON Semiconductor logo are trademarks of Semico nductor Components Industries, LLC dba ON Semiconductor or its subsid iaries in the United States and/or other countries. ON Semiconductor ow ns the rights to a number to make changes without further notice to any products herein. ON Semicon ductor makes no warranty, representation or guarantee regarding the s uitability of its products for any particular purpose, nor does ON Semico nductor assume any liability arising out of the application or use of any product or circuit, and specifica lly disclaims any and all liability, including without limitation spe cial, consequential or incidental damages. Buyer is responsible for i ts products and applications using ON Semiconductor products, including compliance with all laws, regul ations and safety requirements or standards, regardless of any suppor t or applications information provided by ON Semiconductor. “Typica l” parameters which may be provided in ON Semiconductor data sheets and/or specifications can and do vary in diffe rent applications and actual performance may vary over time. All operat ing parameters, including “Typicals” must be validated for each custo mer application by customer’s technical experts. ON Semiconductor does not convey any license und er its patent rights nor the rights of others. ON Semiconductor products a re not designed, intended, or authorized for use as a critical compone nt in life support systems or any FDA Class 3 medical devices or medical devices with a same or similar classifica tion in a foreign jurisdiction or any devices intended for implantation i n the human body. Should Buyer purchase or use ON Semiconductor products fo r any such unintended or unauthorized application, Buyer shall indemnify and hold ON Semico nductor and its officers, employees, subsidiaries, affiliates, and di stributors harmless against all claims, costs, damages, and expense s, and reasonable attorney fees arising out of, directly or indirectly, any claim of personal injury or death associa ted with such unintended or unauthorized use, even if such claim alleges th at ON Semiconductor was negligent regarding the design or manufacture o f the part. ON Semiconductor is an Equal Opportunity/Affirmative Action Employer. This literatu re is subject to all applicable copyright laws and is not for resale in any manne r.

© 2011 Fairchild Semiconductor Corporation www.fairchildsemi.com FSA3030 • Rev. 1.12 FSA3030 — High-Speed USB2.0 Switch/Mobile High-Definition Link (MHL™) Switch with Negative Swing Audio FSA3030 — High-Speed USB2.0/Mobile High- Definition Link (MHL™) with Negative Swing Audio

Features

 Low On Capacitance: 4.2 pF/5 pF MHL/USB (Typical)  Low Power Consumption: 30 μA Maximum  Supports MHL Rev. 2.0  MHL Data Rate: 4.0 Gbps  Audio Swing: -1.5 V to +1.5 V (Typical)  Packaged in 12-Lead UMLP (1.8 x 1.8 mm)  Over-Voltage Tolerance (OVT) on all USB Ports Up to 5.25 V without External Components

Applications

 Cell Phones and Digital Cameras

Description

The FSA3030 is a bi-directional, low-power, high-speed, 3:1, USB2.0, MHL ™ and audio switch. Configured as a double-pole, triple-throw (DP3T) switch, it is optimized for switching between high- or full-speed USB , Mobile High-Definition Link sources (per MHL Rev. 2.0 specification) and negative swing capable audio. The FSA3030 contains special circuitry on the switch I/O pins, for applications where the V CC supply is powered off (VCC=0), that allows the device to withstand an over-voltage condition. This switch is designed to minimize current consumption even when the control voltage applied to the control pins is lower than the supply voltage (V CC). This is especially valuable in mobile applications, such as cell phones, allowing d irect interface with the general-purpose I/Os of the baseband processor. Other applications include switching and connector sharing in portable cell phones, digital cameras, and notebook computers.

Ordering Information

Part Number Top Mark Operating Temperature Range Package FSA3030UMX LU -40 to +85°C 12-Lead, Ultrathin Molded Leadless Package (UMLP), 1.8 mm x 1.8 mm HDMI to MHL Bridge Baseband or Application Processor USB_D+ USB_D- MHL+ MHL- VBUS ID GND microUSB Connector GND VBAT SEL[0] Sel0 Sel 1 Vcc MHL+ MHL- USB+ USB- To USB Battery Charging Block R L R L SEL[1] 3M 3M GND OTG_ID Figure 1. Typical Application All trademarks are the property of their respective owners.

Figure 2. Analog Symbol Table 1. Data Switch Select Truth Table

1. Control inputs should never be left floating or unconnected . To guarantee default switch closure to the USB

Figure 3. Pin Assignments Figure 4. Top Through View

1 SEL0 Data Switch Select

2 SEL1 Data Switch Select

3 USB+ USB Differential Data (Positive)

4 USB- USB Differential Data (Negative)

5 R Audio Right

6 L Audio Left

7 MHL+ MHL Differential Data (Positive)

8 MHL- MHL Differential Data (Negative)

9 GND Ground

10 D- Data Switch Output (Positive)

11 D+ Data Switch Output (Negative)

12 VCC Device Power from System

© 2011 Fairchild Semiconductor Corporation www.fairchildsemi.com FSA3030 • Rev. 1.12 4 FSA3030 — High-Speed USB2.0 Switch/Mobile High-Definition Link (MHL™) Switch with Negative Swing Audio Absolute Maximum Ratings Stresses exceeding the absolute maximum ratings may dama ge the device. The device may not function or be operable above the recommended operating conditions and stressing the parts to these levels is not recommended. In addition, extended exposure to stresses above the recommended operating conditions may affect device reliability. The absolute maximum ratings are stress ratings only. Symbol Parameter Min. Max. Unit VCC Supply Voltage -0.5 6.0 V VCNTRL DC Input Voltage (SEL[1:0])(2) -0.5 VCC V VSW (3) DC Switch I/O Voltage(2) USB -0.5 VCC V MHL -0.5 VCC AUDIO -2.0 3 IIK DC Input Diode Current -50 mA IOUT Switch DC Output Current (Continuous) USB 60 mA MHL 60 mA AUDIO 60 mA IOUTPEAK Switch DC Output Peak Current (Pulsed at 1 ms Duration, <10% Duty Cycle) USB 150 mA MHL 150 mA AUDIO 150 mA TSTG Storage Temperature -65 +150 °C MSL Moisture Sensitivity Level: JEDEC J-STD-020A 1 ESD IEC 61000-4-2, Level 4, for D+/D- and VCC Pins(4) Contact 8 kV IEC 61000-4-2, Level 4, for D+/D- and VCC Pins(4) Air 15 Human Body Model, JEDEC: JESD22-A114 All Pins 3.5 Charged Device Model, JESD22-C101 2 Notes: 2. The input and output negative ratings may be excee ded if the input and output diode current ratings are observed. 3. V SW refers to analog data switch paths (USB, MHL, and audio). 4. Testing performed in a system environment using TVS diodes. Recommended Operating Conditions The Recommended Operating Conditions table defines the condi tions for actual device operation. Recommended operating conditions are specified to ensure optimal perfo rmance to the datasheet specifications. Fairchild does not recommend exceeding them or designing to Absolute Maximum Ratings. Symbol Parameter Min. Max. Unit VCC Supply Voltage 2.5 4.5 V tRAMP(VCC) Power Supply Slew Rate 100 1000 µs/V JA Thermal Resistance 230 °C/W VCNTRL Control Input Voltage (SEL[1:0])(5) 0 4.5 V VSW(USB) Switch I/O Voltage (USB Switch Path) -0.5 3.6 V VSW(MHL) Switch I/O Voltage (MHL Switch Path) 1.65 3.45 V VSW(AUD) Switch I/O Voltage (Audio Switch Path) -1.5 3.0 V TA Operating Temperature -40 +85 °C Note: 5. The control inputs must be held HIGH or LOW; they must not float.

© 2011 Fairchild Semiconductor Corporation www.fairchildsemi.com FSA3030 • Rev. 1.12 5 FSA3030 — High-Speed USB2.0 Switch/Mobile High-Definition Link (MHL™) Switch with Negative Swing Audio All typical value are at TA=25°C unless otherwise specified. Symbol Parameter Condition VCC (V) TA=- 40°C to +85°C Unit Min. Typ. Max. VIK Clamp Diode Voltage IIN=-18 mA 2.5 -1.2 V VIH Control Input Voltage High SEL[1:0] 2.5 to 4.50 1.0 V VIL Control Input Voltage Low SEL[1:0] 2.5 to 4.50 0.5 V IIN Control Input Leakage SEL[1:0] VSW(USB/MHL)=0 to

3.6 V, VSW(AUD)=0 to

3.0 V, VCNTRL=0 to VCC

4.5 -0.5 0.5 µA IOZ(MHL) Off-State Leakage for Open MHL Data Paths VSW=1.65 MHL 3.45 V SEL[1:0]=VCC 4.5 -1 1 µA IOZ(USB) Off-State Leakage for Open USB Data Paths VSW=0 USB 3.6 V SEL[1:0]=VCC 4.5 -0.5 0.5 µA ICL(MHL) On-State Leakage for Closed MHL Data Paths(6) VSW=1.65 MHL 3.45 V, SEL0=GND, SEL1=VCC, Other Side of Switch Float 4.5 -0.75 0.75 µA ICL(USB) On-State Leakage for Closed USB Data Paths(6) SEL[1:0]=GND, Other Side of Switch Float 4.5 -0.75 0.75 µA ICL(AUD) On-State Leakage for Closed(6) AUDIO Data Path VSW=-1.5 R/L 1.5 V SEL1=GND, SEL0=VCC, Other Side of Switch Float 4.5 -1.0 1.0 µA IOFF Power-Off Leakage Current (All I/O Ports) VSW(USB/MHL)=0 to

3.0 V, Figure 5

0 -1 1 µA RON(USB) HS Switch On Resistance (USB to D Path) VSW=0.4 V, ION=-8 mA, SEL[1:0]=GND, Figure 6 2.5 4.5  RON(MHL) HS Switch On Resistance (MHL to D Path) VSW=VCC-1050 mV, SEL0=GND, SEL1=VCC ION=-8 mA, Figure 6 2.5 5  RON(Audio) Audio Switch On Resistance (R/L Path) VSW= -1.5 V to 1.5 V, SEL1=GND, SEL0=VCC, ION=-24 mA, Figure 6 2.5 4  ∆RON(MHL) Difference in RON Between MHL Positive-Negative VSW=VCC-1050 mV, SEL0=GND, SEL1=VCC, ION=-8 mA, Figure 6, 2.5 0.03  ∆RON(USB) Difference in RON Between USB Positive-Negative VSW=0.4 V, ION= -8 mA, SEL[1:0]=GND, Figure 6 2.5 0.18  RONF(MHL) Flatness for RON MHL Path VSW=1.65 to 3.45V, SEL0=GND, SEL1=VCC, ION=-8 mA, Figure 6 2.5 1  RONFA(AUDIO) Flatness for RON Audio Path VSW=-1.5 V to 1.5 V, SEL1=GND, SEL0=VCC, ION=-24 mA, Figure 6 2.5 0.1  RSH Shunt Resistance 3.6 125 200 Ω ICC Quiescent Current VCNTRL=0 or 4.5 V, IOUT=0 4.5 30 µA ICCT Delta Increase in Quiescent Current per Control Pin VCNTRL=1.65 V, IOUT=0 4.5 18 µA VCNTRL=2.5 V, IOUT=0 4.5 10 Note: 6. For this test, the data switch is closed with the respective switch pin floating.

© 2011 Fairchild Semiconductor Corporation www.fairchildsemi.com FSA3030 • Rev. 1.12 7 FSA3030 — High-Speed USB2.0 Switch/Mobile High-Definition Link (MHL™) Switch with Negative Swing Audio USB High-Speed AC Electrical Characteristics All typical value are at TA=25°C unless otherwise specified. Symbol Parameter Condition VCC (V) Typ. Unit tSK(P) Skew of Opposite Transitions of the Same Output(8) CL=5 pF, RL=50 Ω, Figure 14 3.0 to 3.6 3 ps tJ Total Jitter(8) RL=50 Ω, CL=5 pf, tR=tF=500 ps (10-90%) at

480 Mbps, PN7

3.0 to 3.6 15 ps Note: 8. Guaranteed by characterization. All typical value are at TA=25°C unless otherwise specified. Symbol Parameter Condition VCC (V) Typ. Unit tSK(P) Skew of Opposite Transitions of the Same Output(9) RPU=50 to VCC, CL=0 pF 3.0 to 3.6 3 ps tJ Total Jitter(9) f=2.25 Gbps, PN7, RPU=50 to VCC, CL=0 pF 3.0 to 3.6 26 ps Note: 9. Guaranteed by characterization. Capacitance All typical value are at TA=25°C unless otherwise specified. Symbol Parameter Condition Typ. Unit CIN Control Pin Input Capacitance(10) VCC=0 V, f=1 MHz 1.5 pF CON(USB) USB Path On Capacitance(10) VCC=3.3 V, f=240 MHz, Figure 15 6.5 COFF(USB) USB Path Off Capacitance(10) VCC=3.3 V, f=240 MHz, Figure 16 2.5 CON(MHL) MHL Path On Capacitance(10) VCC=3.3 V, f=240 MHz, Figure 15 6.5 COFF(MHL) MHL Path Off Capacitance(10) VCC=3.3 V, f=240 MHz, Figure 16 2.5 CON(AUD) Audio Path On Capacitance(10) VCC=3.3 V, f=1 MHz, Figure 15 8.0 COFF(AUD) Audio Path Off Capacitance(10) VCC=3.3 V, f=1 MHz, Figure 16 2.5 Note: 10. Guaranteed by characterization.

NOTES: A. PACKAGE DOES NOT CONFORM TO ANY JEDEC STANDARD. B. DIMENSIONS ARE IN MILLIMETERS. C. LAND PATTERN RECOMMENDATION IS EXISTING INDUSTRY LAND PATTERN. D. DRAWING FILENAME: MKT-UMLP12ArevF DETAIL A SCALE 2:1BOTTOM VIEW SIDE VIEW 3 6

0.10 C A B

0.05 C 1.80±0.10 1.80±0.10 0.40 0.20±0.05 (12X) 0.40±0.05 (11X) 2.10 0.40 0.563 (11X) (12X) 0.20 0.588 0.20±0.05 0.42±0.05 (0.20) 4X A TOP VIEW PIN #1 IDENT B SEATING PLANE 0.15±0.05 0.025±0.025 C 0.50±0.05 DETAIL A PIN #1 IDENT SCALE 2:1 LEAD OPTION 1 SCALE 2:1 LEAD OPTION 2 PACKAGE EDGE 2.10 45°

www.onsemi.com ON Semiconductor and are trademarks of Semiconductor Components Industries, LLC dba ON Semiconductor or its subsidiaries i n the United States and/or other countries. ON Semiconductor owns the rights to a number of patents, trademarks, copyrights, trade secrets, and other intellectual property . A listing of ON Semiconductor’s product/patent ON Semiconductor makes no warranty, representation or guarantee regarding the suitability of its products for any particular purpose, nor does ON Semiconductor assume any liability arising out of the application or use of any product or circuit, and specifically disclaims any and all liability, including without limitation special, consequential or incidental damages. Buyer is responsible for its products and applications using ON Semiconductor products, including compliance with all laws, reg ulations and safety requirements or standards, regardless of any support or applications information provided by ON Semiconductor. “Typical” parameters which may be provided in ON Semiconductor data sheets and/or specifications can and do vary in different applications and actual performance may vary over time. All operating parameters, including “Typicals” must be validated for each customer application by customer’s technical experts. ON Semiconductor does not convey any license under its patent rights nor the right s of others. ON Semiconductor products are not designed, intended, or authorized for use as a critical component in life support systems or any FDA Class 3 medical devices or medical devices with a same or similar classification in a foreign jurisdiction or any devices intended for implantation in the human body. Should Buyer purchase or use ON Semiconductor products for any such unintended or unauthorized application, Buyer shall indemnify and hold ON Semiconductor and its officers, employees, subsidiaries, affiliates, and distributors harmless against all claims, costs, damages, and expenses, and reasonable attorney fees arising out of, directly or indirectly, any claim of personal injury or death associated with such unintended or unauthorized use, even if such claim alleges that ON Semiconductor was negligent regarding the design or manufacture of the part. ON Semiconductor is an Equal Opportunity/Affirmative Action Employer. This literature is subject to all applicable copyright laws and is not for resale in any manner. PUBLICATION ORDERING INFORMATION N. American Technical Support: 800−282−9855 Toll Free USA/Canada Europe, Middle East and Africa Technical Support: Phone: 421 33 790 2910 Japan Customer Focus Center Phone: 81−3−5817−1050 www.onsemi.com LITERATURE FULFILLMENT: Literature Distribution Center for ON Semiconductor 19521 E. 32nd Pkwy, Aurora, Colorado 80011 USA Phone: 303−675−2175 or 800−344−3860 Toll Free USA/Canada Fax: 303−675−2176 or 800−344−3867 Toll Free USA/Canada Email: orderlit@onsemi.com ON Semiconductor Website: www.onsemi.com Order Literature: http://www.onsemi.com/orderlit For additional information, please contact your local Sales Representative  Semiconductor Components Industries, LLC